Internal table in smartform

In driver program:
TYPES: BEGIN OF ty_output,
var1 TYPE c,
var2 type c,
TYPES: END OF ty_output.
DATA: gt_output TYPE TABLE OF ty_output.
how to declare this in smartforms?
Thanks

Hi,
You can do this in two ways....
1. If you need the interal table to be accessed globally in the smartform, you can declare the internal table in global definitions
first you need to define TYPES for the internal table in Types tab.
and this needs to be given as reference in Global Data tab for the internal table.
2. You need the internal table to be local ,then you can create a program lines node and declare the internal table as you do in the ABAP program
Hope this helps
Regards,
Sujatha

Similar Messages

Issue in display format of a internal table in SMARTFORM

I m printing an internal table in smartform.when a particular field exceeds the coloumn's length.the rest of the texts come down to the next line.It can be shown in the below example.i m printing "+ text to be printed" in that particular coloumn.
Because of the size of the coloumn in table ,"ed." comes down as shown.
+ text to be print
ed.
I dont want ed to come directly down '+'.I want it to start from where 't' of 'text'
starts in the above line.
Notice that the requirement is to print "ed" after '4' spaces.
Please suggest what i need to do to get the desired result...
Regards
Rudra

Unfortunately there is no such way.

Issue in display format of internal table in smartform

I m printing an internal table in smartform.when a particular field exceeds the coloumn's length.the rest of the texts come down to the next line.It can be shown in the below example.i m printing "+ text to be printed" in that particular coloumn.
Because of the size of the coloumn in table ,"ed." comes down as shown.
+ text to be print
ed. 
its coming by default.
I want it like + text to be print
ed
I dont want ed to come directly down '+'.I want it to start from where 't' of 'text'
starts in the above line.
Notice that the requirement is to print "ed" after '2' spaces.And we can not use the string length concept bcoz not of characters after which the line comes down is not fixed.May be some change of setting in smartform will do the trick.
Please suggest what i need to do to get the desired result...
Regards
Rudra

Unfortunately there is no such way.

Declaring an internal table in smartform

hi,
 can anyone tell how to declare internal table in smartform.
 the internal table contains fields from 2 or more data dictionary tables(eg.kna1
 and adrc). after this from the print program(internal table containing data in print
 program) internal table should be passed to the smartform.
thanks.

hi laxya,
if u want to pass the data from internal table in print program to Smartform.. there is only way.. that is using form interface..
1. goto se11, create a structure same as the itab in the print program.ex. z_itab
2. create line type... se11>select radio button-DATA type>z_it_itab >press create>then select>TABLE Type> then entrer some text--> in the line type Field in giveth Str name u have created in STEP 1. activate it.
3. got SMARTFORMS-> form inteface>tables tabe--> give some name ex IT_tab type z_it_itab.
then acivate it.. then in the driver progam pass this table data.
Exapmpel
CALL FUNCTION fp_v_fm_name
 EXPORTING
 archive_index = toa_dara
 archive_parameters = arc_params
 control_parameters = fp_st_control_parameters
 user_settings = space
 output_options = fp_st_output_options
 wa_vbdkr = fp_st_vbdkr
 IMPORTING
 job_output_info = l_it_ssfcrescl
 job_output_options = l_it_ssfcresop
 TABLES
 IT_tab = z_it_itab (or table in driver program)
EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Another way is cteate a type in Globaldifination-->types tab..
ex:
types: begin of ty_itab,
 matnr type matnr,
 meins type meins
 vrkme type vrkme,
end of ty_itab,
ty_it_itab type standard table of ty_itab.
then GLOBAL DIFINATION>GLOBAL DATA TAB>IT)ITAB TYPE TY_IT_ITAB.
BUT In this u can't pass the data from the print Program.. if u want to populate data in to this table... u have to write the Select query in the GLOBAL DIFINATIONS-->INITILIZATIONS TAB.
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K
Message was edited by:
 Naresh Reddy

How to Define Internal Table in Smartform

Hello,
I have some problem on define Internal Table in Smartform
I define a Temp_IT_Gen Type LBBIL_IT_GEN in Global Definiations
but i find that it is not available for me to append data into it,
the error message is Temp_IT_Gen is not a Internal Table - the Occurs n Specification is missing
so how can i solve it?
i want to use the internal table in the hold program.
Thanks a lot in advance.

Hi,
First U define the Table type in 'TYPES' tab of Global Definitions and then assing that table type to Internal table in 'Global Data' tab.
Eg:
define the Table Type like below in TYPES tab.
TYPES:BEGIN OF ty_TEMP.
        INCLUDE STRUCTURE XXXXXXX.
TYPES:END OF ty_TEMP.
TYPES: g_t_temp TYPE STANDARD TABLE OF ty_TEMP .
Now, define the Internal table in Global Data tab like below:
Variable Name    Type assignment    Associated Type
G_T_ITEM_1       TYPE                    G_T_TEMP
NOTE: whatever U define in Global Definitions can be used only in SMARTFORM, if u want to use it in Program U must define in Form Interface.
Hope it helps!!
Rgds,
Pavan

How to Import customized internal table to smartform from Print Program

Hi Gurus,
I want to Import customized internal table to smartform from print program, Can anybody tell me how it is possible.
With regards,
S.Saravanan

There is no problem passing an internal table to a smarforms, smartforms have the same interface as a function module ([Defining the Form Interface|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm] in [Smart Forms|http://help.sap.com/saphelp_nw70/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm]) so could you elaborate a little more on your requirement (is it a standard a custom forms, etc.)
Regards,
Raymond

Passing internal tables into smartforms

Hi All,
I am testing a smartform for PO. But the smartform is already designed and it has two internal tables of type EKKO and EKPO. When i run the smartform its displaying the layout correctly but with no data ,which is true as the two internal tables have no data. So i want to fill those two internal tables based on the purchase order number/ numbers. So that i can test the smartform with those purchase order numbers.
I want to create a parameter / select option in smartform so that when we enter the PO number those internal tables will be filled. How to create those options in the smartform.
If i have to create through an ABAP program then i want to know how to pass those two internal tables to smartform. (Shall i have to call the FM couple of times and then pass those two internal tables).
Thanks in Advance

You fill the tables in the print program and pass the tables to the SmartForm function module under the tables section. See the FM call below (CALL FUNCTION lf_fm_name) and note that I am only passing in one internal table. If you wish you may pass in more than one table.
*& Form smartform_print
* text
* --> p1 text
* <-- p2 text
FORM smartform_print .
DATA: lf_fm_name TYPE rs38l_fnam.
DATA: ls_control_param TYPE ssfctrlop.
DATA: ls_composer_param TYPE ssfcompop.
DATA: ls_recipient TYPE swotobjid.
DATA: ls_sender TYPE swotobjid.
DATA: lf_formname TYPE tdsfname.
DATA: ls_addr_key LIKE addr_key.
PERFORM set_print_param USING ls_addr_key
 CHANGING ls_control_param
 ls_composer_param
 ls_recipient
 ls_sender
 retcode.
*Get the Smart Form name.
IF NOT tnapr-sform IS INITIAL.
 lf_formname = tnapr-sform.
ELSE.
 MESSAGE e001(/smb40/ssfcomposer).
ENDIF.
IF vbdkr-vkorg = '0035'.
 IF w_regio = 'QC'.
 tnapr-fonam = 'ZPCC_INVOICE_FR'.
 ENDIF.
ENDIF.
* IF NOT tnapr-sform IS INITIAL.
* lf_formname = tnapr-sform.
* ELSE.
* MESSAGE e001(/smb40/ssfcomposer).
* ENDIF.
* determine smartform function module for invoice
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING formname = lf_formname
* variant = ' '
* direct_call = ' '
 IMPORTING fm_name = lf_fm_name
 EXCEPTIONS no_form = 1
 no_function_module = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* error handling
 retcode = sy-subrc.
 IF sy-subrc = 1.
 MESSAGE e001(/smb40/ssfcomposer).
 ENDIF.
 IF sy-subrc = 2.
 MESSAGE e002(/smb40/ssfcomposer).
 ENDIF.
 PERFORM protocol_update.
ENDIF.
CALL FUNCTION lf_fm_name
 EXPORTING
 archive_index = toa_dara
* ARCHIVE_INDEX_TAB =
 archive_parameters = arc_params
 control_parameters = ls_control_param
* MAIL_APPL_OBJ =
 mail_recipient = ls_recipient
 mail_sender = ls_sender
 output_options = ls_composer_param
 user_settings = ' '
 vbdkr = vbdkr
 temp_jmval = temp_jmval
 temp_agval = temp_agval
 w_ship = w_ship
 w_ktgrd = w_ktgrd
 likp = likp
 w_trlrnbr = w_trlrnbr
 w_sealnbr = w_sealnbr
 w_booknbr = w_booknbr
 w_lc = w_lc
 w_shippoint = w_shippoint
 billto_fedid = billto_fedid
 soldto_fedid = soldto_fedid
 shipto_fedid = shipto_fedid
 vbco3 = vbco3
 w_z4_address = w_z4_address
 w_stawn = w_stawn
 w_herkl = w_herkl
 new_rate = new_rate
 vblkp = vblkp
 TABLES
 vbdpr = tvbdpr
* t_containers = t_containers
* tdomvd = tkomvd
* da_xfplt = da_xfplt
* payment_split = payment_split
* komk = komk
* frt_conditions = frt_conditions
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
 retcode = sy-subrc.
 PERFORM protocol_update.
* get SmartForm protocoll and store it in the NAST protocoll
 PERFORM add_smfrm_prot.
ENDIF.
ENDFORM. " smartform_print
Davis

Sy-tabix for internal table in smartform

Hi friends,
How to capture the sy-tabix value for the entries in an internal table which has been looped into the loop of table node of a smartform?? I need to print something immedaitely after the end of the table
For every record the value of sy-tabix is showing 1 !!
Advance Thanks
Aadarsh

Hi Aadarsh,
Give ur sy-tabix at the end of the loop.
loop at itab.
//table node populations.
endloop.
give a seperate loop for this.
loop at itab.
sy-tabix.
endloop
get the total no and print it after the table.
If u r using do loop then give sy-index.
Hope tihs helps u,
Regards,
Nagarajan.
Message was edited by: Nagarajan Kumarappan

Regd Wagetype and basic pay from 0008 thru internal table in smartform..

Hi,
I have a requirement where i have to display in my smartform the values for basic pay and different wagetypes from infotype 0008. In my smartform for 1 employee, only those values of wagetype and basic pay should print which are maintained in 0008. If no value then it should not display in my smartform at all (No even like 0.00).
For this i have made an internal table in my smartform. Plesae advice how can i pass these vales in my smartform.
Note* - There is a filed in my custom inftyope 9003 - "Salary details as on (P9003-ZZDATE1). The value for basic pay and wagetype should be less than or equal to this date.

Hello Preethi,
From your thread ,what i understood is that you have created a able in the smartform.right?You can loop this table and put a condition for checking whether there any records in the internal table.
Hope this will help you !!!
Reward points if it found useful!!
Regards,
Manoj.

How to call Subroutines,Standard Text & using Internal Table in SmartForm

Hi all,
need help in the following areas.Its very urgent!
1.How to CAll Subroutines in Smart Forms
2.How to CAll Standard Text in Smart Forms
Situation:
We have an Internal Table T_SALES with all the data which am going to display in the smartform,How to retrive data from an internal table in Smart forms
Any Help in this direction would be highly appreciated.
Regards
Ramu

Hi,
When you are using quantity or currency fields, you have to mentiong the reference fileds in a tab called CURRENCY/QUANTITY FILEDS in the GLOBAL DATA node.
Specifying a Currency or Quantity Reference
Use
In the ABAP Dictionary, you can assign a currency or quantity field to a table field. In the output of these fields, the system can then insert the relevant currency or unit:
·        If the value field is in the same table as the corresponding currency or quantity field, the system recognizes the reference automatically, and formats the value field according to the currency or unit in the assigned field.
·        If the value field is in a different table from the currency or quantity field, the system cannot recognize this reference automatically.
In the second case, you must indicate this reference to the system in the form, to ensure that the value field is formatted correctly.
Procedure
You want to assign a currency or quantity field in one table (for example, CURTAB) to a value field in another table (for example, VALTAB).
       1.      Create the reference to the currency field by entering the following values:
-         Field Name: VALTAB-VALUE, if this is the value field of VALTAB that you want to display.
-         Reference Field: CURTAB-CURRENCY, which is the currency field of CURTAB.
       2.      Under Data Type, specify whether the data type is a currency or quantity.
Result
In the output of the PDF-based print form, the system formats the value field VALTAB-VALUE according to the assigned value in the currency or quantity field of the global variable CURTAB-CURRENCY.
Thanks and Regards,
Bharat Kumar Reddy.V
Message was Added by: Bharat Reddy V
Message was Added by: Bharat Reddy V

Can't we pass custom defined internal table in SMARTFORM Interface

Hi,
I have a scenario, that my internal table from the program is is not dictionary type, but combination of some fields. Can't I directly pass this table to my smartform.
Thank U 4 Ur time.
Cheers,
Sam

hi,
We can not pass the Internal tables to a Smartforms, you need to create the Structure and give the Structure in the Smartform, and declare the the internal table of that structure type and pass it
Regards
Sudheer

How to define internal table in smartform(urgent)

Hi all,
How can i define a internal table with header line in global data ???
i defined like
In Types,
TYPES : BEGIN OF T_XVBPLP2 ,
 VENUM(10),
 VEPOS(10),
 POSNR(6),
 VEMNG LIKE LIPS-LFIMG,
 MATNR LIKE LIPS-MATNR,
 CHARG LIKE LIPS-CHARG,
 ARKTX LIKE LIPS-ARKTX,
 END OF T_XVBPLP2.
TYPES: T_XVBPLP TYPE TABLE OF T_XVBPLP2.
In Global Data,
T_XVBPLP TYPE T_XVBPLP.
Still, i am getting error message that, Internal table is not with header line.
can u plz give me some examples , to define internal table with header line in smartform ???
any correct answers will be rewarded??
Regards
pabitra

Hi
define WA_ITAB in Global variables
variable name type assin associated type
t_text like zstc_text
you cannot define a internal table with header line in SMART Forms. Declare a internal table and a work area separately both referring to the same structure.
Then you can use the work area. So, in this case WA_ITAB is declared as a global variable of TYPE ZSTC_TEXT.
Regards
Pavan

Print long internal table in smartform, error SSFCOMPOSER250

Hi experts,
In VL03N i'm getting this error SSFCOMPOSER250 (Table row is larger than 176 cm) when printing a long internal table containing item's serial numbers. The item has 1000 serial numbers, and they are passed to the smartform in an internal table. I tried to separate in different rows, each one with 200 serial numbers but when printing the 3rd block the message appears again.
Is it possible to print this table in the smartofrm ??
thanks in advance,
María

I used SERIAL_LS_PRINT to get the serial numbers and then PROCESS_SERIALS_FOR_PRINT and got this:
( 768790876 - 768791875 )
But I need to print all the serial numbers, not an interval..

PASSING INTERNAL TABLE IN SMARTFORM

HI' I M NEW TO SMARTFORMS, MY PROBLEM IS =THAT
I'VE CREATED A NEW TYPE(SAY TY_BKPF) IN THE DRIVER PROGRAM.
THEN I'VE DECLARED AN INTERNAL TABLE OF THIS TYPE.
TO PASS THIS INTERNAL TABLE INTO MY SMARTFORM I'VE PASSED THE INTERNAL TABLE'S NAME INTO THE FUNCTION MODULE UNDER THE TABLES PARAMETER.
BUT I'M NOT ABLE TO UNDERSTAND AS TO WHAT TYPE SHOULD I GIVE IT IN THE FORM INTERFACE IN THE TABLES TAB.
PLZ HELP.

Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
Also have a look at below sample code. It will give you idea abt the same.
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
 INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
 MOVE-CORRESPONDING MKPF TO INT_MKPF.
 APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
 formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
 FM_NAME = FM_NAME
EXCEPTIONS
 NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3.
if sy-subrc <> 0.
 WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
 GS_MKPF = INT_MKPF
EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5.
if sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Have a look at below link for more help on smart forms.
http://sap.ionelburlacu.ro/sap0/sapsf001.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Use internal table in Smartform

Hi All,
I want to use the internal table in program in smartform.
For that i have declare that table in TABLES attribute of the function module and trying to declare that table in form interface in smartform.I have created one stucture in data dictionary of same type for the associated type of that table.But it showing me error that only table types can be used as reference type for a table parameter.
Can anybody give me the solution or atleast tell me what is problem?
Thanks.

Hi,
First you define an internal table in your Driver program and populate the same with the data and put it in the Export parameters.
Then, in your Smartform, in the Form interface parameter's declarations, specify the name which you gave in the Driver program ( the Left hand side name in the interface list of the Function Module ) and specify it as type of the internal table you have used in the Driver program.
Please define in the same way as mentioned and let me know how it worked for you or still any issues on this.
Thanks,
Vishnu.

How to declare internal table in SMARTFORM

Hi experts,
I have an Internal table in my program and I want to declare in the smartform as well. How and where can I declare? Should I use global definitions and tpyes tab? How can I pass the content of the internal table to the smartform?

Click Global Defiitions
In TYPES :
TYPES : BEGIN OF gty_add,
         name1      TYPE ad_name1,                          " name1
         city1      TYPE ad_city1, " City
         country    TYPE adrc-country, "Coutnry
         post_code1 TYPE ad_pstcd1, " post code
         street     TYPE ad_street, " street
         house_num1 TYPE ad_hsnm1, " house number
         tel_number TYPE ad_tlnmbr1," tele number
        END OF gty_add.
In Global DATA
GT_ADD     TYPE TABLE OF     GTY_ADD ( Internal table)
WA_ADD     TYPE     GTY_ADD ( work area)

Internal table in smartform

Similar Messages

Maybe you are looking for