Internal Table - logic for Chunk

Hi,
I have an internal table with n records.
I want to use at a time say max of 20 records .
This is calling a BDC.
i.e.
loop at n record.
take 20 records.
call BDC.
then next set of recrds.
repeat process till all records processed.
Thanks in Advance.
Amit

Hi,
try this way.
data: count type i.
loop at table
if count LE 20.
    add 1 to count.
else.
    clear count.
    call bdc.
    "refresh all the concerned tables and variables for the next 20 records.
endif.
endloop.
Or.
loop ...
WHILE count le 20.
   ADD 1 TO count.
ENDWHILE.
    clear count.
    call bdc.
    "refresh all the concerned tables and variables for the next 20 records.
endloop
Regards.
Marcelo Ramos

Similar Messages

VA03 - Base tables & Logic for structures

Hi,
In a data archiving project, I have to identify the tables & fields which are to be archived based on customers reports. When we try to find out tables & fields for the reports, there are lot of fields with structures. How to find out the base tables for these structures? In VA03 report, I need to find out the base tables & logic for the below structure-fields
CCDATA-CCINS
CCDATA-CCNUM
RV45A-DWERK
RV45A-BTGEW
RV45A-GEWEI
RV45A-VOLUM
RV45A-VOLEH
CCDATA-DATBI
VBAPD-EPMEH
RV45A-PRGBZ
KOMV-KSCHL
KOMV-KBETR
RV45A-KOEIN
RV45A-KFREL
RV45A-ABGESP
RV45A-DWERK
VBAPD-EPMEH
RV45A-PRGBZ
RV45A-KFREL
RV45A-KWMENG
RV45A-PRGBZ
RV45A-ETDAT
RV45A-EPMEH
RV45A-KFREL
RV45A-PSTYP
RV45A-KNTTP
VBEPD-RSETD
VBAPD-EPMEH
RV45A-GRETD
Could you please tell me the base tables & the logic for these fields.
Thanks,
Venkat

Hi
Venkat Rao
Just check the field in the tables given by Jhon and also check the some of the tables below
VEPVG - Open Sals Order QTY.
VBUK - Open Sales Order
Use the transaction SE16 / SE11 and try to serach the field and find out base tables and logic.
RV45A-DWERK --- Plant u will find this in VBAP
RV45A-PSTYP --- Document type and so on.....
Thx.

Internal table logic issue

Hi All,
I have one logical issue related to internal table manipulation.
I have one internal table :
I_DAT - This is related to Loading/Unloading of Goods.
for example with 3 fields
VSTEL, KUNNA, KMMANG.
Now suppose my data looks like this after sorting:
VSTEL   KUNNA    KMMANG
100       -        -
200       -        -
300       -        -
400       -        -
-         500      X
-         600      X
-         700      X
-         800      X
Here 100,200,300,400 are Loading points.
ANd 500,600,700,800 are unloading points.
Now what i want is For loading & Unloading points i need to pick up Address and print one after other.
But how they need to print is:
FOR INITIAL LOADING OF
ADDRESS- For 100
FIRST STOP: FOR LOADING OF
ADDRESS- For 200
SECOND STOP: FOR LOADING OF
ADDRESS- For 300
Etc .....
Then
FOR UNLOADING OF:
ADDRESS- For 400
FIRST STOP: FOR UNLOADING OF
etc.
FINAL STOP: FOR FINAL UNLOADING OF
We might get as many records :
Can any body give me the logic:
Printing Address is not a problem:
But Above every address we need to print FIRST STOP, SECOND etc like that.
For this i need logic.
Can anybody give the solution!
Thanks in advance.
Thanks & Regards,
Prasad.

Try this.I think you want output like this......
DATA: BEGIN OF LINE,
        CARRID   TYPE SBOOK-CARRID,
        CONNID   TYPE SBOOK-CONNID,
        FLDATE   TYPE SBOOK-FLDATE,
        CUSTTYPE TYPE SBOOK-CUSTTYPE,
        CLASS    TYPE SBOOK-CLASS,
        BOOKID   TYPE SBOOK-BOOKID,
      END OF LINE.
DATA ITAB LIKE SORTED TABLE OF LINE WITH UNIQUE KEY TABLE LINE.
SELECT CARRID CONNID FLDATE CUSTTYPE CLASS BOOKID
       FROM SBOOK INTO CORRESPONDING FIELDS OF TABLE ITAB.
LOOP AT ITAB INTO LINE.
AT FIRST.
    WRITE / 'List of Bookings'.
    ULINE.
ENDAT.
    AT NEW CARRID.
      WRITE: / 'Carrid:', LINE-CARRID.
    ENDAT.
      AT NEW CONNID.
        WRITE: / 'Connid:', LINE-CONNID.
      ENDAT.
        AT NEW FLDATE.
          WRITE: / 'Fldate:', LINE-FLDATE.
        ENDAT.
          AT NEW CUSTTYPE.
            WRITE: / 'Custtype:', LINE-CUSTTYPE.
          ENDAT.
               WRITE: / LINE-BOOKID, LINE-CLASS.
            AT END OF CLASS.
              ULINE.
            ENDAT.
ENDLOOP.
This is also helpful......
LOOP AT <itab>.
AT FIRST. ... ENDAT.
    AT NEW <f1>. ...... ENDAT.
      AT NEW <f2 >. ...... ENDAT.
          <single line processing>
      AT END OF <f2>. ... ENDAT.
    AT END OF <f1>. ... ENDAT.
AT LAST. .... ENDAT.
ENDLOOP.
Regards
Abhishek

Regarding Internal table logic

Hi,
I have my internal table as follows:
DATA: BEGIN OF I_DATA OCCURS 0,
        prgname TYPE SYST-REPID,
        matnr   TYPE mara-matnr,
        berid   TYPE mdma-berid,
      END OF I_DATA.
Data that fills into can be as follows:
Ex:
PROGRAM1,1000,MRP1
PROGRAM1,1000,MRP1
PROGRAM1,2000,MRP1
PROGRAM2,1000,MRP1
PROGRAM2,1000,MRP1
PROGRAM2,2000,MRP1
PROGRAM3,1000,MRP1
PROGRAM3,1000,MRP1
PROGRAM3,2000,MRP1
It can any order in above way.
Then i will sort the above data as follows:
SORT I_DATA BY prgname matnr berid.
Now here my issue is:
DATA: t_objtxt     LIKE solisti1   OCCURS 0 WITH HEADER LINE.
I need to push the above internal table data into T_OBJTXT internal table as follows:
It should first Display program Name as Program Name: Program3, Then column heading MATNR, BERID below it and data of that program[1st] below them till all the 1st program's data finished. Whenever MATNR value changes in this program list i need to print an ***** like line. TO indicate all the materials printed.
When 2nd program comes again i have to write Program Name: Program2, Then column heading MATNR, BERID below it and data of that program[1st] below them till all the 1st program's data finished. Whenever MATNR value changes in this program list i need to print an ***** like line. TO indicate all the materials printed.
When 3nd program comes again i have to write Program Name: Program3, Then column heading MATNR, BERID below it and data of that program[1st] below them till all the 1st program's data finished. Whenever MATNR value changes in this program list i need to print an ***** like line. TO indicate all the materials printed.
Etc. Same process we need to follow.
The final out put should be as below:
PROGRAM NAME : PROGRAM1
MATNR, BERID
1000,MRP!
1000,MRP1
2000,MRP1
PROGRAM NAME : PROGRAM2
MATNR, BERID
1000,MRP!
1000,MRP1
2000,MRP1
PROGRAM NAME : PROGRAM3
MATNR, BERID
1000,MRP!
1000,MRP1
2000,MRP1
Like wise o/p need to be send to I_OBJTXT and to email.
<b>The logic i have written is as follows:</b>
LOOP AT I__DATA.
    AT NEW PRGNAME.
      MOVE '*****************************************' TO t_objtxt-line.
      APPEND t_objtxt.
      CLEAR t_objtxt.
      CONCATENATE t_objtxt-line 'PROGRAM NAME : '
                  I_DATA-PRGNAME
                  INTO t_objtxt-line.
      APPEND t_objtxt.
      CLEAR t_objtxt.
      MOVE '*****************************************' TO t_objtxt-line.
      APPEND t_objtxt.
      CLEAR t_objtxt.
      CONCATENATE TEXT-024 " Material
                  TEXT-025              " MRP
                  INTO t_objtxt-line
                  SEPARATED BY C_COMMA.
      APPEND t_objtxt.
      CLEAR t_objtxt.
      MOVE '-----------------------------------------' TO t_objtxt-line.
      CONCATENATE t_objtxt-line '------------------' INTO t_objtxt-line.
      APPEND t_objtxt.
      CLEAR t_objtxt.
    ENDAT.
*    MOVE '' TO t_objtxt-line.
*    APPEND t_objtxt.
*    CLEAR t_objtxt.
    CONCATENATE I_DATA-MATNR
                I_DATA-BERID
                INTO t_objtxt-line
                SEPARATED BY C_COMMA.
    APPEND t_objtxt.
    CLEAR t_objtxt.
    AT END OF MATNR.
      MOVE '' TO t_objtxt-line.
      APPEND t_objtxt.
      CLEAR t_objtxt.
      MOVE '*****************************************' TO t_objtxt-line.
      CONCATENATE t_objtxt-line '******************' INTO t_objtxt-line.
      CONCATENATE t_objtxt-line '******************' INTO t_objtxt-line.
      APPEND t_objtxt.
      CLEAR t_objtxt.
    ENDAT.
ENDLOOP.
The above logic is not working correctly.
Can anybody give me correct logic for the same.
Thanks in advance.
Thanks,
Deep.

Can you paste the total code.
santhosh

Internal table logic required

Hi ,
I have two internal tables having with different structures . Finally I need to pass data to final internal table.
In runtime we have data in only one table. The final internal table should take either internal1, or internal table 2.
it_final_data[] = it_first_data[].
or
it_final_data[] = it_sec_data[].
i have to one generic include , it will understands the IT_final_data internal table only.
please help me.
regards,
Ajay

Hi Ajay,
     Build your final internal table with all the fields from first and second internal table. Use the below logic to move the data to the final internal table depending on the internal table data which you want to display.
IF not it_first_data[] is initial.
loop at it_first_data.
    move-corresponding it_frist_data to it_final_data.
    append it_final_data.
endloop.
else.
   loop at it_second_data.
    move-corresponding it_second_data to it_final_data.
    append it_final_data.
endloop.
endif.
Hope this works for you.
Regards,
Jayaram

Internal Table Logic Needed

Hi all,
I have a requirement regarding data processing in a internal table,
internal table consists of filelds Vendor,Material and Scheduling Dates and Total Qty.
Here i need to fill the field Total Quantity, individual addition of quanties of that material for a particular vendor .
Let us consider intitially my internal table consists of data like this with these fields.
                  Vendor ,           Material ,            qty(individual),   Total qty   , Schedule dates
                   v1        ,           m1       ,                 10
                   v1        ,           m1        ,                10
                   v1       ,             m1       ,                  20
                   v1       ,              m2      ,                    5
                   v1       ,             m2        ,                 10
                   v2        ,            m2         ,                20
                  v2        ,             m2        ,                  15
                  v2        ,            m3         ,                  20
                  v2        ,            m3           ,                10
    Initiall the total qty field is empty i need to fill tht field for the last item for a particular material Like M1
for vendor v1 and total qty of m2 for vendor v1, total qty of m1 for v2, total qty of m2 for v2 and so on.
Requied output should be like this.
                 Vendor     ,          Material       ,    qty(individual)            Total qty   Schedule dates
                  v1         ,                m1         ,         10           ,               0
                   v1          ,              m1          ,        10           ,                 0
                   v1         ,                m1         ,         20          ,                40(101020)
                   v1        ,                 m2          ,         5           ,               0
                   v1          ,               m2           ,      10            ,              15(5+10)
                   v2          ,               m2          ,        20            ,             0
                   v2          ,               m2           ,       15             ,              35(20+15)
                  v2           ,              m3          ,        20              ,             0
                  v2            ,              m3           ,       10              ,           30(20+10)
Here i made one thing , i calculated the total qty of material for particular vendor.
Like
         Vendor                           Material                     Total Qty
                 v1        ,                        m1            ,             40
                 v1        ,                       m2              ,            15
                 v2         ,                     m2                ,           35
                 v2          ,                    m3                 ,           30
Finally i need the logic by using Control Events(At New   , At End of ) to adjust that total qty of a material for a particular vendor by Modifying the internal table.
i hope my problem is clear , pls let me know if any clarifications needed. and
code for the same .
Thannks in advance,
Niranjan.

Hi,
Solution is here.
sort itab by vendor material.
field-symbols: <itab> like line of itab.
loop at itab assigning <itab>.
on change of vendor.
clear flag.
endon.
add <itab>-quanity to lw_quantiy.
*--here pdate internal table end of each similar kind of record
at end of.
flag = 'x'.
<itab>-totalqty = lw_quantiy.
clear lw_quantiy
endat.
*--rest of record update zero by checking flag
if flag is initial.
<itab>-totalqty = 0.
endif.
endloop.
close this thread if you got solution.
Regards,
Peranandam

How to use dynamic internal table with FOR ALL ENTRIES

Hello SDNers,
I am having a dynamic internal table & want to use FOR ALL ENTRIES(FAE) using this dyn. table.
This works fine for me:
IF <lt_tmp> IS NOT INITIAL. "<lt_tmp> is my dyn. internal table
        SELECT field1 field2
          FROM TABLE ztable
          INTO TABLE itab "Itab is a static table
          FOR ALL ENTRIES IN <lt_tmp>
          WHERE (lv_dynwhere). "lv_dynwhere -> dynamic where clause
      ENDIF.
SAP documentation says:
"The logical expression sql_cond of the WHERE condition can be comprised of several logical expressions using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one comparison with a column of the internal table itab that can be specified statically or dynamically. "
How do we specify the column of the internal table dynamically ? Can we do something like this:
IF <lt_tmp> IS NOT INITIAL. "<lt_tmp> is my dyn. internal table
        SELECT field1 field2
          FROM TABLE
          INTO TABLE itab "Itab is a static table
          FOR ALL ENTRIES IN <lt_tmp>
          WHERE key_field1 = (dynamic token for column1 of <lt_tmp>)
                       key_field2 = (dynamic token for column2 of <lt_tmp>)
      ENDIF.
      ENDIF.
Let me know if i am not clear about my requirement.
BR,
Suhas

Hello Thomas,
What i meant was something like this:
WHERE key_field1 = ('<LT_TMP-COL1>') AND
      key_field2 = ('<LT_TMP-COL2>')
I am confused by what SAP means with "dynamic representation of internal table columns" in FAE ?
@Rob: I was referring to SAPNW 7.0 documentation & the phrase (release 6.40 & higher) is missing. Anyways fyi i am on ECC5.0 ABAP release 6.40.
@Subhankar: This is what Marcin had proposed in For all entries and dynamic table.
Thanks,
Suhas
Edited by: Suhas Saha on Apr 6, 2010 11:53 AM

How to delete entries in an internal table except for one entry

Hi all,
I have 4 records in my internal table and I need to delete all the records in the internal table except the last one.How do i do this?Any sample code?
Thanks.
Moderator message - Please do not ask or answer basic questions - thread locked
Edited by: Rob Burbank on Dec 16, 2009 3:23 PM

Hi,
use following logic:
DATA: lt_itab type standard table.
DATA: l_lines type i.
DESCRIBE TABLE lt_itab lines l_lines.
l_lines = l_lines - 1.
delete lt_itab from 1 to l_lines.
Regards,
Karol

Internal table problem for BDC

Hai i am having flatfile like this format
H   text1   1000   plant_name   10 short_text   X     X
                                                 20 short_text   X     X
                                                 30 short_text   X     X
H   text1   1000   plant_name   10 short_text   X     X
                                                 20 short_text   X     X
                                                 30 short_text   X     X
now this H indicates new record. In each new record number of line items are there.
How to proceed using internal tables. please help me.

hi,
arrange your flat file like this...
H    text1 1000 plant_name 10 short_text X X
H    text1 1000 plant_name 20 short_text X X
H    text1 1000 plant_name 30 short_text X X
H1 text1 1000 plant_name 10 short_text X X
H1 text1 1000 plant_name 20 short_text X X
H1 text1 1000 plant_name 30 short_text X X
now make an internal table having all the fields present in your flat file
and loop at that internal table and on change of field H call your function module and pass the value for record H......
similarly it will work for H1.....H2.....
for eg...
LOOP AT "Your internal table" INTO "Work area of your internal table".
    AT END OF "field name for H".
      CALL FUNCTION ''Your function module"

Doubts in internal table logic

Hi All,
I have two internal table, according to the posnr value i need to add the kbetr value from the 2nd internal table and update the value in the 1st line internal table. below the example of my internal table. Here for the line item 0010 i need to calculate 10.0030.1011.00 and i need to add the value inthe 1st internal table kbeter_value. can anyone help this?
POSNR        MATNR kbetr_value
0010             abc
0020             xyz
0030             123
POSNR     KBETR
0010       10.00
0010        30.10
0010       11.00
0010       60.30
0020       12.64
0020       11.32
0030       79.46
0030       00.00
0030       45.3
by
Mohana

Hi Mohana,
Its very simple ..you can do it in many ways....
first one is in the second internal table use collect ....
for example : 1st internal table is itab and the second is jtab .
1. In jtab u use collect stmt to calculate the posnr values .
loop at jtab.
collect jtab .           " by using this u will have 0010    111.40 in jtab
endloop.
structure of jtab will be :
0010    111.40
0020    .........
0030    ..........
2. afterwards while printing you can use read to get those :
loop at itab.
read table jtab with key posnr = itab-posnr.
if sy-subrc = 0.
itab-ksbtr-value = itab-value .
modify itab .
endif.
endloop.
Hope you got it by now...if you any problem do reply back ....
cheers,
Vishnu .

Process Internal table -Logic

Hi,
My internal table has following data
A      10     30
A      20     50
A      00     100
B      20     40
B      10     90
I need output as
    (Lowest)   (Highest)
A   10               100
B   10               90
How do we do?
rgds
Praveen

Namesh,
Program does'nt work for 3 or more records. any ideas?
<
report x.
DATA: BEGIN OF ITAB OCCURS 0,
      FLD1 TYPE CHAR20,
      NUM1 TYPE I,
      NUM2 TYPE I,
      END   OF ITAB.
*A 10 30
*A 20 50
*A 00 100
*B 20 40
*B 10 90
*C 0 40
*C 10 120
ITAB-FLD1 = 'A'.
ITAB-NUM1 = '10'.
ITAB-NUM2 = '30'.
APPEND ITAB.
ITAB-FLD1 = 'A'.
ITAB-NUM1 = '20'.
ITAB-NUM2 = '50'.
APPEND ITAB.
ITAB-FLD1 = 'A'.
ITAB-NUM1 = '00'.
ITAB-NUM2 = '100'.
APPEND ITAB.
ITAB-FLD1 = 'B'.
ITAB-NUM1 = '20'.
ITAB-NUM2 = '40'.
APPEND ITAB.
ITAB-FLD1 = 'B'.
ITAB-NUM1 = '10'.
ITAB-NUM2 = '90'.
APPEND ITAB.
itab-fld1 = 'C'.
itab-num1 = '0'.
itab-num2 = '40'.
append itab.
itab-fld1 = 'C'.
itab-num1 = '10'.
itab-num2 = '120'.
append itab.
DATA: ITAB2    LIKE ITAB OCCURS 0 WITH HEADER LINE,
      ITAB_TMP LIKE ITAB OCCURS 0 WITH HEADER LINE.
DATA: NEW_FLD TYPE C.
LOOP AT ITAB.
AT NEW FLD1.
    NEW_FLD = 'X'.
ENDAT.
IF NEW_FLD = 'X'.
    ITAB_TMP[] = ITAB[].
    DELETE ITAB_TMP WHERE FLD1 = ITAB-FLD1.
    CLEAR NEW_FLD.
    SORT ITAB_TMP BY FLD1 ASCENDING
                     NUM1 ASCENDING.
    READ TABLE ITAB_TMP INDEX 1.
    ITAB2-FLD1 = ITAB_TMP-FLD1.
    ITAB2-NUM1 = ITAB_TMP-NUM1.
    SORT ITAB_TMP BY FLD1 ASCENDING
                     NUM2 DESCENDING.
    READ TABLE ITAB_TMP INDEX 1.
    ITAB2-NUM2 = ITAB_TMP-NUM2.
    APPEND ITAB2.
ENDIF.
ENDLOOP.
LOOP AT ITAB2.
WRITE: / ITAB2-FLD1,
           ITAB2-NUM1,
           ITAB2-NUM2.
ENDLOOP. >

Reg. internal table logic

Hi,
I have an internal table with 5 fields (Vbeln, A, B, C, D ) and records like this:
Record1:
Field vbeln (value is 6000000001), Field A (value is 2006), Field B (value is 1130), Field C (value is initial), Field D (value is initial)
Record1:
Field vbeln (value is 6000000001), Field A (value is initial), Field B (value is initial), Field C (value is 2005), Field D (value is 1134)
Now whenever, Field A and Field B has values, field C and field D are initial and vice versa.
I Want to get all of the field values in just one record like below when the key vbeln is same.:
Field vbeln (value is 6000000001), Field A (value is 2006), Field B (value is 1130), Field C (value is 2005), Field D (value is 1134)
I know I can create another internal table, copy the contents, use the looping logic and achieve the same but wondering if there is any better way of doing the same?
Appreciate your input.
Thanks!

Hi,
You need another internal tables. Please try this.
SORT ITAB1.
ITAB2[] = ITAB1[].
LOOP AT ITAB1.
LOOP AT ITAB2 WHERE ITAB2-VBELN EQ ITAB1-VBELN
                  AND ITAB2-DATE1 NE ITAB1-DATE1
                  AND ITAB2-TIME1 NE ITAB1-TIME1.
    ITAB3-VBELN = ITAB1-VBELN.
    ITAB3-DATE1 = ITAB1-DATE1.
    ITAB3-TIME1 = ITAB1-TIME1.
    ITAB3-DATE2 = ITAB2-DATE2.
    ITAB3-TIME2 = ITAB2-TIME2.
    APPEND ITAB3.
ENDLOOP.
ENDLOOP.
Regards,
Ferry Lianto

Internal table Logic need

Hi ,
I have one Internal table it_marc contains the MATNR
and one more final internal table it_final. I want to read the all MATNR from IT_FINAL by using IT_MARC which contains the same MATNR. I mean all the MATNRs even dupliacates also.
regards,
Ajay

Hi,
Use For all entries.
Select matnr from it_marc
                    into corresponding fields of table it_final
                    for all entries in it_marc[]
                    where matnr = it_marc[]-matnr.
Please give me ur need exactly, so that we can better understand ur que.
Reward if Helpful.
Jagadish.

Populating Empty Fields for Existing Internal Table Using For All Entries

I have an internal table called itab_extract that populates without any issues in SELECT A and SELECT B below. Trying to avoid looping, I am using select DB table 'for all entries' in itab_extract. I want the empty fields in itab_extract to populate from the values in the database. However, about 200,000 entries are being appended to the table, and, the values that existed for the already populated fields in itab_extract are gone, and the new fields are populated.
I've played with the syntax and cannot seem to get it to work. My next option is a time consuming loop.
How should the for all entries syntax look to accomplish filling the empty fields in the itab?   Thank-You
*read ekko
    select ebeln lifnr aedat bsart from ekko                                                     *SELECT A*
           into CORRESPONDING FIELDS OF TABLE me->itab_extract
           where aedat in r_aedat.
    select ebeln lifnr aedat BSART from ekko                                                  *SELECT B*
           appending CORRESPONDING FIELDS OF TABLE me->itab_extract
           where aedat in S_DATE2 AND
                 BSART IN S_BSART.
      select ebelp werks matnr                                                                           *SELECT C*
        into CORRESPONDING FIELDS OF TABLE itab_extract
        from ekpo
        FOR ALL ENTRIES IN itab_extract
        where ebeln = itab_extract-ebeln.

Hi Tom,
           This SQL statement will be time consuming, Do not use a loop.
There are two options.
1. Select EKKO and EKPO details based on standard SAP view. (You can type EKKO in se11 view to find the correct view).
    also use one range table populate r_aedat and s_date2 in the same. So you where condition will have r_newrange and
    s_bsart. Also do not use into corresponding fields, it is not a good idea. It will increase your performance. Maintain the proper
    sequence (Based on database structure of EKKO and EKPO)
2. If you are keen to use for all entries, then first select ekko then after your sy-subrc check get the data from EKPO.
Should be like this.
select ebeln bsart aedat lifnr from ekko into table gt_ekko where aedat in r_newrange and bsart in s_bsart.
if sy-subrc eq 0.
sort gt_ekko by ebeln ascending.
select ebeln ebelp werks matnr into table gt_ekpo for all entries in gt_ekko where ebeln eq gt_ekko-ebeln.
endif.
Hope it helps,
Best Regards,
Tapodipta Khan.

Internal table handling for table controls

hi,
can any one say me how we manage to store one header data and more than one line item data in one internal table. pls provide me one example with code.
thanks,

You need to make sure that table t_open_summ contains only the data for PO =xxxx matnr=xxx to begin with. I.e. when that table is filled in, just don't put any other data there. Then all the corresponding scrolling code (Page Up/Down) will work as usual.
As an alternative, you could create a "clone" of t_open_summ and work with it instead.

Internal Table - logic for Chunk

Similar Messages

Maybe you are looking for