Internal use flag of attachment in SRM and ERP

Hi
In SRM RFx bid document, when i attach file and checked internal flag for the attachment,
how does it behave in ERP system? does ERP has option for internal use?
Currently i using Content server and storing file attachment in Document type SRM.
Where can i confirm the internal flag is checked for the document in ERP.
Looks like SRM has internal use option and ERP does not have internal use option at DMS screen CV01n
or document screen
Pls advice
Regards
Chandra

Where can i confirm the internal flag is checked for the document in ERP.
As far as I understand, ECC RFQ does not have attachment capability. Where would you want the RFx in SRM and its attachments to flow in ECC?
If you are talking about follow-on documents of an SRM RFx, such as PO/CTR to be replicated in ECC, then no, ECC attachment does not have "internal" flag. Such flag is only in SRM to indicate the visibility of an attachment to the purchasing company and vendors. If "internal" is set, the document is invisible to the vendors/suppliers.

Similar Messages

  • Integration between SRM and ERP in part of Business Partners

    Hi all
    Could we make integration between SRM and ERP in part of Business Partners if we use Standalone Scenario? Thanks

    Hi
    Any scenario, You have EBP system as well as you said you have ERP system too. so you can do BBPGETVD and pull the vendor records. Normally standalone system may not have ERP system. In standalone Your account payable system integrated with your EBP system.
    If you want to create a vendors locally in SRM  you can create local vendors via web  BBPMAININT or BP in GUI.
    regards
    Muthu
    Edited by: Muthuraman Govindasamy on Sep 10, 2008 9:14 AM

  • Remove RFC calls between SRM and ERP

    Hi,
    Did any of you ever worked on removing RFC calls between SRM and ERP systems?
    Does SAP maintains a lost of these built-in RFC calls?
    What are the known constraints to replace them by webservice calls ?
    Thanks
    Yann

    Hi Yann,
    There is nothing on the SAP database for SRM and the backend using webservice.
    There is for connections to SRM catalog.
    I haven't heard anything about plans to change this.
    Hope this helps,
    Kind Regards,
    Matthew

  • Sending PO with attachment from SRM to ERP

    Hi Experts,
    My requirement is to Send PO with attachment from SRM to ERP.
    I can get the attachment in the payload as mentioned in https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3509. [original link is broken] [original link is broken] [original link is broken]
    But how to post this attachment into the target ERP system so that it gets saved as an attachment in the Purchase Order.
    Thanks & Regards,
    Shobhit

    Hi Shobhit,
    I asume, the PO is send as an IDOC to ERP?
    In this case, you have no chance to attach the attachment.
    A wortkaoud would be to extract the needed date from the attachment and map the values into correcponding fields of the PO-Idoc.
    Regards Mario

  • Best Practice for Use of ABAP in Customizing SRM and/or CRM

    I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM.   Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
    Thanks.

    Hi, Johnson
    Sorry, Please don't mind, you are not at right place to ask the Question like this
    Please read "The Forum Rules of Engagement" before posting!  HOT NEWS!!
    Thanks and Regards,
    Faisal

  • Financial newby: Combining SAP SRM and ERP Financial Accounting

    Hello,
    Looking for an Invoice Management System expert. I would like to know the following two things.
    1. On posting an 'incomming invoice' (with reference to a PO) in SRM this Invoice will be replicated to the R/3 back-end system. The back-end will and should use this invoice to follow-up the financial administrative process, how do they go about on this. The purchase order and Invoice will be posted to f.e. G/L 'Sources, with tax 19%'. What transaction do financial administrators use to book/post bank/liquid asset changes against these invoices?
    2. Up on creating a credit memo, for example for 1 of the 2 line items that wern't delivered but where initially invoiced, do we need to create a Credit Memo in SRM with negative amounts or does the Credit Memo with positive amounts suffice. It will always be used as credit, positive doesn't mean it's debit? (I think credit memo's in SRM work almost the same as Credit Memo's in R/3)
    Kind regards,
    Tim

    Dear all,
    I answer my request, as nobody is talking about this subject.
    I passed the CO certification
    SAP Certified Application Associate - Management Accounting (CO) with SAP ERP 6.0 EhP6
    and succeed without having SAP training, i've 4 years of SAP FICO experiences and 1 year of auditing, accounting experience.
    All i've to say is to read and study many times  SAP documentation but be carreful as CO change with planning in the new ledgers and CO report, take the most updated training documentation.
    My advice is to work hardly every day, even with the help of SAP training , you've to work hard, the training is just making it easy for you.
    Good luck.
    Houda

  • SRM and ERP follow on documents

    Hello all, I am working in SRM 7.0 in a classic scenary.
    When I create a shopping cart that generate purchase requisition in the backend system, and then I create a purchase order with reference to this purchase requisition directly in the backend, this PO doesn´t appears in the follow on document tab information.
    I am not sure that this is correct or not. Follow on documents in this case must be updated in SRM?
    Thanks in advance
    Rosa Rodríguez

    YES.
    Follow on docuement must be updated in the each item of the shopping cart .
    check clean_reqreq_up and BBP_GET_Status_2 jobs.
    you need to explore if they were not updated in SRM.
    in ECC docuemnts shopping cart details will not be there , if you want sc number in ECC business object, you need little enhancement to populate sc number with item field.
    check bbp_pd
    or paste first 20 lines of bbp_pd .

  • How to use java connecter to access Mainframe and ERP applications from EJB?

     

    yea. its just a desktop chess application.
    my IP changes and im behind a router so its hard to
    get
    connections to my computer. i figured i could have a
    central
    server to manage the connections online.
    and later maybe having other applications running on
    the website that people can connect to.Well now I am more confused...
    Here are the options.
    1) If you want to run your service program on a server you're going to need some sort of virtual server hosting package. When people say Java hosting they usually mean Servlet/JSP hosting in a Servlet/JSP engine/container.
    But this does not appear to be what you need. You appear to need to be able to just run whatever you want. There are virtual server hosting packages out there for fairly cheap... although as always a caveat in that you tend to get what you pay for.
    2) You could just have a website with a servlet (not neccessarily Java could be ASp or PHP or whatever you like) acting as a webservice. You could send your IP of your server to the service. Then clients requesting a connection would get the current IP from your webservice.
    3) You could do like (2) but without the webserver, use DNS instead. There are some services for providing DNS for dynamic IP's about.
    It should be noted that if you want to do applets then probably based on your description you will need to sign them. Generally speaking applets can only connect to the server from where they were downloaded from.

  • HT4993 how to change network from sprint to international use

    I bought mobile from my friend in US . But i am in india . I am unable use my phone in india. Bcoz it is in sprint network. Please help to unlock immediately for international use.

    Only Sprint can unlock it and only if you are a qualified Sprint customer.  Unless the person who sold you the phone can get Sprint to unloked for you, SOL.

  • SRM and SRM-MDM: Error when ordering less than Price Base Quantity

    Hi!
    We face the following issue:
    We have an item without material master in the MDM-catalog. The price is scaled, and 5.00 EUR up to 100 items, and 4.80 EUR for more than 100 items
    If we order 90 items, the price is calculated to 5.00 EUR in MDM, BUT the price is displayed as 0.00 EUR per 100 items when transferred to SRM. The price is also 0.00 when transferring to SAP ERP backend.
    If we order 100 items or more, the price is calculated correctly in MDM, and also transferred correctly to SRM and ERP. This also applies if we order e.g.  110 items - everyting looks correct (price for 110 is 5.28 EUR).
    AND: in both cases, we can observe the price is correct in the OCI !
    So, something happens in SRM if we order less than the Price Base Quantoty
    SRM5.0, SRM-MDM 2.0
    Since the price is correct in the OCI we would suspect the error to be somewhere in SRM? Any ideas?
    brgs ziggy
    Edited by: ziggy ziggy on Oct 27, 2009 10:35 AM

    Hello Ziggy,
    Could you please check OSS notes 1311046 and 1296024.
    We found OSS note 1339905 and in the correction instructions were quite a few notes relating to a '0' price issue.
    Obviously I don't know on which support pack level you're on.
    Good luck,
    Franz

  • MDM integrity between SRM and R/3

    Hi All,
    How MDM integrity of the process validations being made between SRM and R/3 for the creation of different documents.
    Please share me any documents regarding MDM intergirty between SRM and R/3. This is not related to Catalogs,
    1. Creation of documents like GOA in SRM and distributed to R/3. How MDM will validate that data.
    2 If same material available in different backend system. while creating Contract in SRM, MDM should check the R/3 materials in MDM
    3. How to integrity works for Vendors.
    Thanks
    ravi

    Hi,
    Take a look in these threads:
    [Re: material master replication|Re: material master replication]
    [Master Data Synchronization between SRM and ERP|Master Data Synchronization between SRM and ERP]
    [Re: Material replication|Re: Material replication]
    Rgs,
    Pedro Marques

  • PO Replication from SRM to ERP

    Hello,
    We replicate purchase orders from SRM to ERP.  Now we would like to make all of the contract data available for reporting in BW.  Would anyone know a bit more about how purchase orders are replicated from SRM to ERP?  The name of the program that actually performs the replication would be great, but any information would be appreciated.

    Hi Larry,
    You can transfer you purchase orders based on your product categories and purchasing group and purchasing organsiations and their setting in SRM and ERP.
    To do that before you need to replicate Products, Product categories from ERP to SRM then you can transfer your PO from SRM to ERP.
    see the link below.
    http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
    If you already done replication you need to maintain a purchasing group which will handle all the requirements that are to be transferred to ERP from SRM.
    This Purchasing group should also be part of  Organsiation structure in ERP.
    With regards,
    mahesh

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • I've lost the use of Appleworks in 10.9.2. Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other?

    I've lost the use of Appleworks by upgrading to 10.9.2.
    Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and  few other applications that aren't available on OS 10.9.2.
    Any suggestions?
    Thank you for your help.

    Hello again, WZZZ,
    Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
    Some thoughts:
    • The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
    • The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
    • If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
    So, all in all a good project that got me where I wanted to go. Thank you for your help.
    Appreciatively,
    wallah

  • Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?

    Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?

    I would guess you need the A1460 model
    see here
    http://www.apple.com/ipad/LTE/

Maybe you are looking for