International calls don't work ....... ??????????????.............?????????

Dear any help for Dial Peer to international Calls i can not do any international calls .... i did these commands:
translation-rule 5
Rule 1 ^001 1
dial-peer voice 5 pots
numbering-type network
destination-pattern 00
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing called 5
port 7/0:D
national calls are ok.
any help please to do dial peer for international calls?
thank you

ok man,
i attached my debug files for Q931 but i saw many causes for drop calls (no route, unassigned number,...) see them please.
i don't know where the problem exact i moved the calls to other GW it worked fine, but when i use AS5400 as my GW the calls failed.
can advise for using translation-profile and rules i did not work before with these commands.
Just to be in mind i have local destination numbers i used to:
translation-rule 1
Rule 1 ^03 3
Rule 2 ^06 6
Rule 3 ^07 7
Rule 4 ^05 5
Rule 5 ^02 2
Rule 6 ^5050#9622 2
Rule 7 ^5050#9623 3
Rule 8 ^5050#9627 7
Rule 9 ^5050#9625 5
Rule 10 ^5050#9626 6
dial-peer voice 1 pots
destination-pattern .T
progress_ind progress enable 8
progress_ind connect enable 8
translate-outgoing called 1
port 7/0:D
now how i can use translation-profile and rules for those and international calls?
thank you for help.
Tareq

Similar Messages

  • Internal speakers don't work

    My husband uses the dual USB late 2001 iBook more than I do, mainly with Toast and a Griffin iMic to copy our old vinyl records to CDs, and to run VirtualPC for his PC model railroad design app. He does all this in OS 9.2.2.
    I used the iBook yesterday, and discovered that the internal speakers aren't working at all. (He hadn't noticed!) No startup chime, no alert beeps, nothing. The sound settings are not set to "mute". I rebooted in OS X (version 10.1, the original, which we've never upgraded), and it didn't make any difference. Still no sound.
    If we plug in a set of headphones or external speakers, they will work, playing the startup chime and all other sounds.
    It's never been taken apart, so it's unlikely that the speaker cables have been accidentally disconnected.
    So far, I've tried the following, none of which helped: trashing the Sound prefs in OS 9 and restarting; resetting the PRAM; starting in OS X and then restarting in Open Firmware, resetting the NVRAM and then resetting the PRAM again. I also tried the hint in This Post - restarting with the headphones connected and then disconnecting them. And I tried plugging the iMic into a USB port, and the headphones into the iMic, and restarting and then disconnecting. No use! The iBook Audio Update was already installed, so that's not it.
    We've compared the iBook's OS 9.2.2 Sound control panel with the one on a 7300 also running 9.2.2, and notice one interesting thing. When the iBook is freshly rebooted, the Sound > Speakers tab has the headphone icon present and highlighted, even when the headphones aren't connected. One can plug in the external speakers, and select the speakers icon, and they'll work. But it always defaults back to a highlighted headphone icon upon restart - even when the speakers are plugged in. The 7300's Speakers tab does not show any headphone icon at all, unless the headphones are actually connected. But this is only in OS 9. I don't see a comparable setting in the OS X System Prefs, where I can check on the speaker settings.
    It's as if the iBook's sound port thinks the headphones are connected, even when they're not. Could this be a hardware problem with the port, or some kind of logic board problem?
    My next step will probably be a reinstall of both OS's.
    Dorothy

    Ronda and Dave2,
    Thanks for responding.
    I'm beginning to think it has to be a hardware problem. It happens in both OS's, and when booting from the OS 9 install CD that came with the iBook - no startup chime at all. But the chime is there when either headphones or external speakers are hooked up.
    I did restart with Command-Option-O-F, got into Open Firmware, and followed the instructions for resetting the NVRAM.
    The OS X Sound preference pane has only two tabs: Alert and Output. Output shows only "Built-in audio controller", no matter what's plugged into the output port. (In OS 9, the Sound control panel has 4 tabs: Alert, Input, Output and Speakers.) So, in X there's no way to know what speakers the iBook thinks it's using.
    I haven't tried resetting the PMU; it didn't seem from the KB article on PMU reset that doing that would help this problem. (I'm cautious about fiddling with the PMU.) But, the battery is old, doesn't hold a charge very long, and we need to get a new one. We normally use the power adapter, anyway. So maybe a PMU reset would do something.
    I did ask my husband - an experimental physicist - if the speakers could have been damaged by too loud a sound when he was working with Toast, and he said the the sound circuitry should prevent that, unless there were a design flaw.
    On further thought, I probably won't bother reinstalling the systems - just wait until I get back to civilization next week and take it to an Apple Store. (The only authorized service center within 100 miles of this house is one CompUSA 50 miles away.)
    Dorothy

  • OCI 7 calls don't work with 8i

    When I compile and run the OCI demo progs which uses the Oracle 7
    OCI calls under Oracle 8.1.5, the progs crash with segmentation
    fault. With Oracle 8.0.5 they work fine. When I compile the
    demo progs under 8.0.5 und run them under 8.1.5 they crash too.
    Any hints? I have to port an application which uses OCI 7 calls
    to Oracle 8.1.5, because Oracle 8.0.5 don't work under glibc2.1.
    Helmut
    null

    Helmut Swaczinna (guest) wrote:
    : When I compile and run the OCI demo progs which uses the Oracle
    7
    : OCI calls under Oracle 8.1.5, the progs crash with segmentation
    : fault. With Oracle 8.0.5 they work fine. When I compile the
    : demo progs under 8.0.5 und run them under 8.1.5 they crash too.
    : Any hints? I have to port an application which uses OCI 7 calls
    : to Oracle 8.1.5, because Oracle 8.0.5 don't work under
    glibc2.1.
    See my patch for 8i at http://www.suse.de/~mha/oracle/
    We patched the assembler code in libclient.a, which is wrong.
    After recreating libclntsh.so everything works fine.
    I think I posted the patch script here some time ago...
    MH, currently at Oracle, in Redwood City, CA
    null

  • Airplay won't stop trying to connect and internal speakers don't work

    Yesterday I was listening to music (not iTunes) through my headphones when all of a sudden the sound stopped working.  At the same time, a window popped up asking me to enter the Airplay password of a device I did not recognize (I was in a public location).  Any time I tried to adjust the sound, the same Airplay window would pop up.  I thought when I went home the problem would be fixed because I would no longer be in range of the Airplay device, but I still do not have any sound through headphones or the internal speakers.  I don't even get the startup sound when the computer turns on.  I have tried plugging and unplugging my headphones several times to reset that sensor, but nothing changed.  There is no red light by the headphone input, and when I go into settings there is no external output option (see picture). Also, whenever I press any of the volume buttons on my keyboard, I get the the second image.  I have restarted my computer, and searched everywhere for solutions, I have seen a few other people with the same problem but so far no solutions.  I have a 2011 MacBook Pro and am running OS X 10.9.5

    Follow these instructions for deleting the System Preferences plist:
    https://discussions.apple.com/docs/DOC-4301
    Ciao.

  • Skype calls don't work with only one contact

    Hello, I hope there isn't already a similar topic. 
    So, for two years now, there is a friend I try to call regularly. She lives in Algeria and I live in France. At first, we could hear each other. And one day, for no reason (??), I could not hear her anymore. And then when I tried to call back, I could hear her, and she's the one who could not hear me. And then we tried, and tried, and tried, and it was always like that, only one of us could hear the other. I tried to get a new account, I changed computer, and I moved from place to place, and she did too, so I don't know what to blame here. My skype works perfectly with literally anyone else, and it is the same for her. Once I tried to do a conference call, and we could hear each other, and when I tried again it didn't work. Please help me ! 

    Nevermind we fixed the issue. I had to make sure I had my realative's area code included in the phone number.

  • Facebook video call don't work ?

    hi i just download apple os marvericks , and i find problem with video call in facebook , somebody can help me please to restart my video call en facebook

    You made need all to restore your phone. I had this issue when 6.1 appeared, and I coudn't bring it until I made a full and clean restore.
    For user "11142007"
    Maybe it's something that you sincronyze, a glitch, or if you restore from a backup, don't do that anymore, you need a clean install, and afterwards sync the data, don't restore it.
    Keep me posted and if my answer helped you please add.

  • My internal speaker don't work

    Anyone had a problem that internal speaker on a MacBook Pro (summer 2010) stop work after using of headset?

    System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best

  • Qosmio X870 - Internal speaker don't work but headphones do.

    I'm a little annoyed as this problem has seemed to have randomly occurred.
    Making it difficult to pinpoint what caused this/finding a solution... :(
    So after opening my laptop from sleep or hibernate, I can't remember which specifically and want to listen to some music, I notice there is none.
    I plug in my earphones, and there is sound. Both times the sound mixer is indicating sound.
    The speakers are the default device, green tick, and sound levels are picked up. "This device is working properly.".
    I actually let windows automatically find a newer driver version, which it surprisingly did, downloaded and installed - restart laptop. Still no sound.
    I read somewhere that it appears for some that the hibernation and or sleep mode on Toshiba laptops cause the audio drivers to behave strangely. But I don't now what kind of troubleshooting to do, to fix this.
    Or it could be hardware related, regarding the port/jack. I don't know. I pray its software.
    Please could someone help me and make me happy again
    Nigel

    Hi
    >Or it could be hardware related, regarding the port/jack. I don't know. I pray its software.
    I dont think its hardware related issue.
    As I understood the issue: the speakers work properly if the notebook runs in normal mode.
    The speakers dont work if the unit wake up from hibernation or sleep mode.
    I meet such issue on my 2nd notebook. The speakers did not work but sound appeared using connected headphones. I could solve this by sound driver update.
    But I think this isnt a universal solution.
    From my point of few you should try different workarounds.
    First of the notebook should be tested and checked using the Toshiba preinstalled system.
    The image has been configured and tested by Toshiba and usually everything should work properly. Therefore i would recommend you to use the Recovery disk (or HDD recovery procedure) in order to set the notebook back to the factory settings.
    The other workaround would be the uninstallation of the sound driver as well as other sound driver related parts.
    In device manager go to the sound, video and game controller
    Here uninstall/delete the
    - Realtek sound driver
    - nVidia High Definition Audio (if available)
    - Intel high definition audio controller (if available)
    After this short procedure reboot the notebook.
    Now you will need to wait until the deleted devices were recognized and installed again.
    After this process has been finished, check the sound availability.

  • Unlimited world 1 mth calling don't work

    I have used Unlimited world 1 month already several years. I moved my location from Northen Europe to Central Europe. Here I can not call even I just have got information from Skype that new packet is delivered. I have bought Skype saldo and then I can call. I use iPad 3 with latest iOS version. Can someone help me?

    Hello
    You are trying to call to India. Please note that India is not included in the Unlimited World Subscription.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Iphone 5S Internal Call SPeaker not working

    My IPhone 5S 64GB speaker has been stop working , Some time it works automatically I didnt do any thng ,
    Help me out How can I fix it  ?

    if it play out of the headset if you connect it then it's a hardware issue read more here
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    and here
    https://www.google.dk/search?q=iphone+stuck+in+headset+mode&oq=iphone+stuck+&aqs =chrome.0.69i59j69i57j69i65j69i61j0l2.2790j0j7&sourceid=chrome&es_sm=91&ie=UTF-8

  • Additional parameters for catalog call don't work

    we are using BADI  BBP_CAT_CALL_ENRICH and try to add to parameters to the catalog link. We don't use these parameters in the web service definition, they are only added in the BADI. Do I have to use Parameter "PARAM_BADI" for this? Why do we loose parameters even if they are visible in ct_post_values? We have SRM 5.0
    Hubert

    Hi Hubert,
    Apply note [992367|https://service.sap.com/sap/support/notes/992367], this should help.
    Regards,
    Jason

  • Calls don't work!

    Hello, 
    am new to Skype, I bought a Sudan(60 minutes) subscription. Now, as I try to call a mobile phone number there, the calls drop and disconnect!
    am using a windows pc.
    can you please help! 

    Try these steps:
    Go to https://support.skype.com/support_selection
    Sign in to your account (if you’re not signed in already).
    Choose the help topic Payments and the related problem Refund requests.
    At the bottom of the page, click Continue support request, and then click Send an email.
    Enter your details in the fields provided. Under Further information, make sure you select the order that you’re requesting a refund for, and give your reasons for requesting it in the box provided.
    Under Your problem, enter as much detail about your issue as possible, and then click Send support request. We will get back to you as soon as we can.
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

  • Ipod touch internal speakers don't work

    My ipod touch internal speakers won't play; I get alternative selections as to where to send sound (headphones, docking station, AppleTV, etc) but not internal speakers.  I've hard and soft reset but no improvement.  I keep wondering if there is a setting I've overlooked.

    Apple will exchange your iPod for a refurbished one for $199 for 64 GB one and $99 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price
    I would first dry the iPod for about a week in a desiccant like uncooked rice.

  • Enable 3G and phone calls don´t work anymore

    hi there, as soon as i enable 3G for internet, it´s impossible to use the phone for calls, there are horrible noises to hear for the person who calls me or/and nothing to hear for me. when 3G is disabled there is no problem!
    I had this problem even before updating to 3.1
    Any help?
    thanks a lot

    At this point Ulrich I'm back from vacation. Did you do anything else?
    Rbritt,
    Welcome to Apple Discussions!
    I thank you for bringing this thread back to the top, since it got down to the bottom of the list. Each thread really is best handled one person at a time. Could you please start a new topic using the Post a New topic link at the beginning of the board?
    http://discussions.apple.com/thread.jspa?messageID=1748484#1748484
    And tell us if you repaired permissions?

  • Internal speakers don't work and don't appear in system prefs

    all the sudden... i was using my macbook in the morning, it was working. then, later, i turn it on again and it just has no sound and there is a red light coming out the headphone hole... what is happening??? can somebody help me??

    The headphone jack on the MacBook has a small switch for "digital output". The red light you see means the switch is stuck in the "on" position. Try inserting and removing your headphones a few times to see if you can flip the switch. You can also try using a toothpick to poke the switch back into the "off" position. If you're not comfortable doing that, take the computer to an Apple Store and ask a Genius to fix it for you.
    ~Lyssa

Maybe you are looking for