International calls with FaceTime

Hello, I am curious of this FaceTime feature. Can it make ANY international calls to whoever all for free?

iRageU95 wrote:
Hello, I am curious of this FaceTime feature. Can it make ANY international calls to whoever all for free?
More info: http://support.apple.com/kb/HT4319
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

Similar Messages

  • Good day my question is , does anyone of you experiencing when making a call with facetime the phone shuts off and restart

    good day my question is , does anyone of you experiencing when making a call with facetime the phone shuts off and restart

    See this veeeeeeeeeery long thread.
    https://discussions.apple.com/thread/3404857
    It's an issue with hundreds of phones.  Some claim it's software related, some hardware, some say it's a mixture of both.
    Some people have had temporary success with quitting the Phone.app / restoring as a new phone / restoring from an iCloud backup / disabling Siri / toggling speakerphone on & off...
    Unfortunately all of the above only been temporary, with the problem recurring again after a few calls, or a few days etc.
    So far the only solution that seems permanent has been to replace the phone.  But even so, it's the luck of the draw to recieve a functional phone, and not another faulty one.
    I'm completely annoyed as there is no Apple Store near me...... and Apple haven't even acknowledged the issue, despite the above thread being 34 pages long, as of writing.

  • Is It free to call with FaceTime?

    I just wonder if its free to call with facetime or if it cost money.

    its free but it uses your data plan

  • Issue when calling with Facetime video from iphone 6 to iphone 4

    Hello,
    I am trying to call with facetime video from my iphone 6 (ios 8.0.2) to an iphone 4 (ios 7.1.2) but it doesn't work. It works when I use facetime audio but not the video. I have tried to use my ipad 2 (ios 8.0.2) instead of the iphone 6 and I am experiencing the same problem. Can you please help me out here?
    Thnaks!

    The iPhone 4 would have to be on wifi for the video to come through, I think. Is the person with the iPhone 4 on wifi?
    Can that person receive calls from anyone else using Facetime?
    ~Lyssa

  • Call Pickup - Users experience One Way Audio when using Call Pickup Orbit to pickup internal calls with internal Lync 2010 Callers

    Hi
    Noticed an issue where when using Call Park Function with users you receive one way audio when answering the call
    The scenario is
    1) If a user is internal and is homed on Lync 2010 Pool and calls an internal user who is homed on a Lync 2013 Pool and another internal user homed on a Lync 2013 Pool picks up the call with Call Pick Up orbit, Lync 2010 users only hears one way audio and
    same for user who has picked up call
    2) If the scenario is an External PSTN call or another Lync 2013 user these calls are fine
    In Lync Tracing logs a SIP/2.0 481 Call Leg/Transaction Does Not Exist error is returned
    Is this a known bug or expected behavior - Call Pickup is basically useless until all users are migrated to Lync 2013 as there is no way of a user knowing whether call is internal or external and if the user is on Lync 2010 or 2013, obviously in my
    large organization 2000 users no an overnight thing
    Coupled with the fact no Team Call Group\ Simultaneous Ring can be in place for Call Pickup to work im thinking Call Pick Up is not going to happen for awhile
    Is there any fixes\ developments that may help this issue or is there a setting I am missing

    Hi,
    Please install latest update for Lync Server 2010 and 2013.
    http://technet.microsoft.com/en-us/lync/dn146015.aspx
    If the issue persists, please enable logging tool on Front end and Mediation server to get trace for troubleshooting.
    http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • International Calling with an LG Cosmos

    Is it possible to make international calls from the UK with an LG Cosmos ?

    Good Afternoon INF,
    I appreciate your interest in making calls from the the UK with the LG Cosmos. Please be advised this handset is not capable for service while in the UK, due to conflicting network technologies. We do however; have a great Global Rental Program. I have included additional information below for your reference.
    http://goo.gl/Rdvno
    Sincerely,
    JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • Do i get charged by the carrier if i make call with facetime??

    I need to know if my carrier will charge me when calling facetime?? Wat about international facetime calls as well

    depends on if you are using wifi or you cellular service, if using wifi then no but if you are using your cellular service then it will unless ou have a special plan set up with you service provider.

  • How can I place calls with Facetime?

    I'm trying to use facetime to connect with my family that's spread around the country. I have an iMac and I purchased and downloaded the Mac OS X Snow Leopard update. I then downloaded the Facetime beta for the Mac and installed it on my computer. I cannot for the life of me place any calls to other computers or to the iphone4 or anywhere. I keep reading that I can just click on the info in my address book, but that is not working for me. There isn't even an option to "click" on anything. I've restarted my computer to see if that helps the installation but it does not. Help!! What am I doing wrong??

    I don't hink you actually use the "Contacts" application to place the call. Open up Facetime. Do you see your "contacts" in the right-hand margin. You place your call form there.
    FYI, you cane "just click on your contacts information" in Facetime.

  • Lync 2013 - Internal Call with net traffic send to AV Public IP

    Hello
    Firstly brief description of topology:
    - Each user is in respective Site, both networks are internal to our Lync topology
    - When User A calls (audio only) User B, call is working with no problems, however i can see in network logs that User B at the beginning of the call is sending below traffic to Edge server Public IP.
    Client IP
    Dest. IP
    Dest Port
    192.168.34.98
    av.domain.com Public IP
    TCP
    58797
    192.168.34.98
    av.domain.com Public IP
    UDP
    53112
    192.168.34.98
    av.domain.com Public IP
    UDP
    53112
    192.168.34.98
    av.domain.com Public IP
    UDP
    53112
    192.168.34.98
    av.domain.com Public IP
    UDP
    53112
    192.168.34.98
    av.domain.com Public IP
    UDP
    53112
    192.168.34.98
    av.domain.com Public IP
    TCP
    58797
    Can you Please tell me if that is correct and if not how to track why its like that ?
    - call is working peer-to-peer
    - Similar traffic to Public AV IP appears also if User A calls Peer in the same network.
    Looking at Candidates sent by User A:
    a=candidate:1 1 UDP 2130706431 192.168.136.120 3564 typ host
    a=candidate:1 2 UDP 2130705918 192.168.136.120 3565 typ host
    a=candidate:2 1 TCP-PASS 174456319 "AV Public IP" 58797 typ relay raddr 192.168.136.120 rport 13338
    a=candidate:2 2 TCP-PASS 174455806 "AV Public IP" 58797 typ relay raddr 192.168.136.120 rport 13338
    a=candidate:3 1 UDP 184548351 "AV Public IP" 53112 typ relay raddr 192.168.136.120 rport 11668
    a=candidate:3 2 UDP 184547838 "AV Public IP" 53776 typ relay raddr 192.168.136.120 rport 11669
    a=candidate:4 1 TCP-ACT 174848511 "AV Public IP" 58797 typ relay raddr 192.168.136.120 rport 13338
    a=candidate:4 2 TCP-ACT 174847998 "AV Public IP" 58797 typ relay raddr 192.168.136.120 rport 13338
    a=candidate:5 1 TCP-ACT 1684797439 192.168.136.120 13338 typ srflx raddr 192.168.136.120 rport 13338
    a=candidate:5 2 TCP-ACT 1684796926 192.168.136.120 13338 typ srflx raddr 192.168.136.120 rport 1333
    Ports between Users subnets are open as well as to Edge Internal Interface.
    Any tips to isolate it a bit more ? I'll provide more info as required.
    Thank You

    I appreciate your response.
    The first one i already know and in fact it creates my doubt:
    i can find there:  "Within these traces will often be connection attempts to every single IP address provided in the candidate list, including the relay and reflexive candidates"
     According to this sentence my behavior is correct as AV Public IP is in candidates list. Thing is if it should be there in candidates. Based on article i understand that ICE is done on Edge server. Based on  great presentations of Thomas Binder
    here  "clients for ICE part are always connecting to Edge", ( as at the moment of call peer is not aware of remote peer location )
    In my case on Edge there is nothing about my call in contrast to FE where i have all ICE work in SIP logs.
    Simply:
    For internal p2p calls - ICE is done on FrondEnd or Edge ?
    For internal p2p calls - should AV Public IP be included in candidates ?
    Second link doesn't help to answer that question either :( as focuses on ext - int call scenario )
    I believe i am missing some basics here. Thank You & Regards

  • Can't make international calls with Siri?

    I use Siri (in English) and when I try to make it call someone in a specific foreign country I'm having some issues. It works for all national calls and when I phone SOME foreign numbers too (from Australia etc).
    All my numbers (national or not) have the +country code before it and it works perfectly when calling from my contact list, but a few of them don't work when I tell siri to call them: "Sorry, I can't call (name of the contact)". It doesn't give me a reason.
    The number is correct and I phone it several times and it works, but still Siri won't call it, it recognizes the contact and their number, tries to call it and then it says it can't.
    The number has the +country code of 2 digits, and then the normal 10 digits number (just like the national numbers I usually call and THEY WORK).
    Is Siri not allowed to make calls to specific countries? If so, what are these?
    Note that it can call national numbers and also some international numbers I have but only to SOME countries!)
    Thanks!! Please help!

    You also posted this on an iPhone forum. Not sure why you posted it here on an iPad forum.

  • TS4079 I can only make international calls with siri, not local calls

    I live in Burundi, with the country code +257. I can make calls to the US, Canada and Europe but I can't make local calls. I have tried all the troubleshooting tips and tricks, checked my settings etc. Any ideas?

    You also posted this on an iPhone forum. Not sure why you posted it here on an iPad forum.

  • International calling with US Cellular and iPhone 5s

    I am traveling to the Eastern Caribbean and my cell provider (US Cellular) does not have international plans.  Is it possible to purchase prepaid minutes on a sim card?  If so, how is it done?

    If you are located in the US, a purchase of a phone in the US has the iPhone locked to AT&T. You would not be able to use US Cellular.
    On top of that, US Cellular uses CDMA technology, which is not compatible with the iPhone, which uses GSM.

  • Can you call with facetime from an iPad to an imac with both registered to same email

    when I tried to call ipad from imac via facetime it would connect - both devices use my email address will this work?

    See this
    https://discussions.apple.com/thread/4002331?start=0&tstart=0

  • Calling internationally with Facetime on an iPhone

    I just got an iPhone 4S on Saturday, so forgive me if this is a n00b question.  How much would it cost, if anything, to make an international call with Facetime?  I live in the US and a friend of mine lives in the UK.  We both have iPhones and we can text with iMessage, but I wasn't sure if it'd also be free to use Facetime to do it as well.

    All FaceTime calls are done over WiFi, thus they are free(unless you're paying for the WiFi connection).

  • International calls not going through

    Just I have paid for 800 min India subscribtion and calls are not going through
    Regards
    Subhash

     Hello,
    We don't have any reported issues of call malfunction. (There aren't any "international" calls with Skype). All Skype calls are "local" worldwide including calls from one country to another.
    Please contact customer service
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Maybe you are looking for

  • Problem on my Nvidia Geforce 4TI 4800 SE

    I recently posted here [MSI Forum] about how I messed up my BIOS and I have just recently bought a new motherboard. My original motherboard was a: 865PE Neo2 Now, I just bought a: 865PE Neo2-P [platinum Edition] I have: Intel Pentium IV 2.4 1 gig of

  • SAPInst ECC6.0 - Error during phase "Create Java Users"

    Hello, I am currently installing ECC6.0 IDES with windows server 2003 & MaxDB. I am getting an error during the "Create Java Users" phase. The initial error stated that the user SAPJSF already existed. During retry a different error came up - that th

  • Terminal issues with environmental variables

    I am having an issue with persisting environmental variables during a session. I am running an app that requires the sequential running of 3 scripts setenv.sh, build.sh, run.sh. The first script sets variables that are being used by the other scripts

  • If column2 is same for two different column1 data

    I have a table say XYZ like this COLUMN1 COLUMN2 A     B C     B N     X           HJ     X I want to print if column2 is same for two different column1 data I want to print that rowids Please help me in this

  • EAX Problem. Please help

    This has happened a few times in the past and?restarting the computer usually worked this out. When opening the eax console no acti've presets will load. I can not use in enviromental settings or anything like that at all... they don't even appear. I