International Characters in PDF Forms are not shown correctly (Adobe Reader 11.0.06)

I have a PDF form served from a web application and shown in Internet Explorer and want to put in string values with norwegian letter like 'ÅRE ØRE ÆRE'.
These are not shwon correctly when I toggle "Highlight Existing Fields" and the focus is not on the text field in question.
I am runing on Windows 7.

I cannot reproduce this using a test form I created: https://files.acrobat.com/a/preview/e6b390e1-625c-4f59-86c5-c2ca07998279
Does the same thing happen with the form above?  If not, can you share your form with us: http://forums.adobe.com/thread/1408375

Similar Messages

  • PDFs are not shown correctly at more than 150% size

    Hi,
    we use Adobe Reader 8.1.2 and we can´t change it in our company.
    we now have the problems, that a few documents are not shown correctly, when they are shown with more than 150% on the screen.
    at 150% the signature and some lines are shown, when we look at the document witz 177% the lines and the signatures disappear.
    Does someone have the same problem AND a solution?
    Hajo

    Hi,
    I'm having exactly the same problem with my 80gb ipod on my new laptop which is also running Windows 7 64 bit and iTunes 10.1.1.4.
    I initially just tried syncing photos and according to iTunes it was still syncing after 4 hours, this was for 6700 photos and I wasn't asking for full resolution, but iPod just said Connected - Eject before disconnecting. I couldn't disconnect and in the end had to close iTunes before disconnecting, then there were no photos on the iPod.
    Disconnected, rebooted then when I connected the iPod I got the message that it was synced to another PC which I expected so i click to erase and synch, iPod initially showed synching then went to Connected - eject message but itunes was saying "finishing synch" it showed this for hours and out of 6543 songs on the PC it was onlt showing 6002 on iPod. I stopped the synch trie dejecting but got same message Iancenaz got. Again had to close iTunes before I could disconnect iPod safely.
    I'm going to try synching it back on mhy old laptop which is running Windows XP and an older version of iTunes as I suspect its either a Windows 7 or iTunes 10 problem.

  • German umlauts are not shown correctly, when a received e-mail is opened the first time. What can I do?

    When I open a received e-mail the first time, German umlauts (ä, ö, ü) are not shown correctly. Instead of them there are characters like §,$. When I close the e-mails and open them again the German umlauts are shown correctly. I don't know how to solve that problem. Who can help me?

    ''Zenos [[#answer-670786|said]]''
    <blockquote>
    Fascinating. Sounds like an inconsistency between the encoding being used and the encoding being declared. I can't think why it should change when you re-open the message, unless Thunderbird is adding a correct encoding declaration.
    (Most users complain about it working in the opposite direction; messages stored as drafts often restore with damaged "special" characters such as smart quotes, accented characters and umlauts.)
    </blockquote>

  • The maximize/minimize and close and buttons are not shown correctly when FF windows is maximized.

    I have the same problem on all my computers, one running Windows 7 and two with Vista.
    The three buttons in the upper right corner of the FF windows are not shown correctly. They are soft of cut off in the middle when the FF window is maximized.

    It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
    Open the system menu via Alt+Space and see if you can resize that window.<br />
    If that works then close Firefox to save that setting.<br />
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window
    Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
    See http://kb.mozillazine.org/Corrupt_localstore.rdf

  • HT201070 Since my last update RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    Since my last update  to 10.8.4 RAW - Files from Nikon D800 are not shown correctly in the Finder as small prewiev. Can anybody help ?

    update 10.8.5 solved this problem. Thankyou anyway.

  • Placed PNG images which are made in 3ds max are not shown correctly in Ilustrator

    Hello,
    Why placed PNG images (renders) which are made in 3ds max (and then photoshoped) are not shown correctly in Ilustrator. Images appear very noise so you can't see almost a thing. the same pictures (renders) made in Revit appear ok.
    Is there a solution to solve this issue?
    Thanks.

    You would have to provide screenshots of how it looks in PS, including the channels visible. MAX may have embedded extra channels that throw off AI. And of course check whether your PNG is actually 8bit, not 16bit.
    Mylenium

  • The Forms are not displaying correctly

    the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
    are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

    tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
    Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge.  Or open  IECompatData.xml  to see if you should have Compatibility View enabling Microsoft's list.  Or report your problem symptom and
    desired override here:
    http://www.modern.ie/report-compat-problem
    Ref:
    http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
    Robert Aldwinckle

  • HT3939 Hi! Special characters such as è, ê and À are not dislayed correctly when received on an iphone, they appear like ¨c,¸e and R, why?

    Special characters such as è and À are not displayed correctly on my iphone but are no problem in my Outlook.
    Emails are sent from a blackberry Z10
    Thanks

    Special characters such as è and À are not displayed correctly on my iphone but are no problem in my Outlook.
    Emails are sent from a blackberry Z10
    Thanks

  • Cannot open/view/access interactive pdf form on iMac after updating Adobe Reader to 11.0.06.70

    Cannot open/view/access interactive pdf form on iMac after updating Adobe Reader to 11.0.06.70. Please help!

    Here is what it says:
    Please wait...
    If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document.
    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/products/acrobat/readstep2.html.
    For more assistance with Adobe Reader visit http://www.adobe.com/support/products/ acrreader.html.

  • How do I enable a LiveCycle PDF form to be saved in Adobe Reader?

    I have an interactive PDF form that I created in LiveCycle. However, when it is opened with Adobe Reader, the user is unable to save it. They can only print from Reader. How do I enable the LiveCycle PDF form to be saved in Adobe Reader?

    You have to add save rights with Acrobat.
    Open you form in Acrobat and then save it via File > Save As Other > Reader Extended PDF > Enable More Tools.

  • Some fonts are not shown correctly in LabVIEW 2012

    I found a bug related with fonts in LabVIEW2012 f3 KR.
    - When I select NI7SEG in font selection dialog, right font is not shown in the example box.
    - Draw text at point.vi shows same problem for some fonts while other fonts are working.
    I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google. 
    So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK. 
    * OS: Windows 7 32bit KR

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • Some icons are not shown correctly in Gnome tray

    The image should tell everything. In the tray there should be icons from Guake, Dropbox and Skype. However only Skype is visible. Does anyone know where could be the problem?
    I noticed that Synergy icon behaves also wrongly.
    thanks
    Jan

    Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
    - Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
    - LabVIEW 2010 but on same PC shows correct fonts.
    Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
    (1st group)
    Arial Unicode MS...
    Bookshelf Symbol 3....
    Windings 3
    (2nd group)
    @Arial Unicode MS...
    @Terminal
    (3rd group)
    Arial...
    Consolas...
    Courier...  
    Licida Console... 
    NI7SEG...
    Verdana

  • Permissions are not shown correctly in Get Info on Snow Leopard client, using Tiger server w/ ACL's

    Invoking "Get Info" on a file or folder which is on a shared volume hosted by a G5 running Server 10.4 fails to show meaningful permissions when done from a 10.6 iMac.  It says only that the user has "custom permissions", which is true since there are ACL's in operation.  However, the Owner and Group POSIX settings are not shown, only the Everyone setting shows, making it impossible to determine which user created the file (in order to resolve issues when permissions prevent intended action).  The same file or folder will show Owner and Group on 10.5 systems, as well as at the 10.4 Server itself, so we do have a workaround.  I have noticed, though, that I have run into permissions restrictions where I should not, such as creating a folder on a shared volume using a 10.6 system, and then not being able to save into that folder from the same system/user.
    Is there something about the implementation of ACL's in Tiger that confounds Snow Leopard's Finder?

    Hi,
    I did two things to get it working, and haven't taken the time to sort out which did it.  But it is working so it's good enough for me.
    First I followed TeenTitan's suggestion, and also checked "Allow printing from the internet".  I'm behind a firewall so not too concerned I'll get someone's odd photo on the printer.
    Second I went back to server admin, selected the queue under queues in the Print service, then selected IPP and deselected LPR.  Bonjour went grey but stayed checked.
    After this I see the printer with "@ server name" appended, and it added the printer drivers like it should.
    So all working well.

  • COMBO BOXES AND SOME PAGES ARE NOT SHOWN CORRECTLY IN SOME WEBSITES LIKE SBICAPSEC AND MAXNEWYORK LIFE. BUT NO PROBLEM USING WITH IEXPLORER

    I am not able to login to maxnewyork life insurance site while using firefox. I am using firefox 3.6.10 now. Combo boxes are not shown in the some trading websites. I uses noscript2.0.3.3, javaconsol6.0.21, javascript option 1.2.6 and WOT20100908. It creates feeling of inferiority in using Firefox due to these problems.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Symbol characters are not shown correctly in webbrowser

    Hello,
    I have migrated my Forms 6i-application to Forms 11G R2 (11.1.2.0).
    Most problems I have solved. But now I see that Symbol-Characters in boilerplate-text in Formsbuilder are shown correct, but in the web they appear as "translated". In my case the Omega is turned to W.
    In the registry.dat I placed Symbol to be carried to Symbol because I read java could use Symbol.
    But I am wrong.
    Do you know what I must do to get the boilerplatetext shown in the rigth way?
    Thanks in advance.
    best regards
    Eveline Merches

    See my comments in this post:
    client_get_file_name do not go to specified folder

Maybe you are looking for

  • Firefox stops responding and causes Windows to stop responding also

    Sorry if this is vague; I just wrote a very, very detailed post on my issues but then the site decided that I didn't have permission to post it and erased everything. My problem is that Firefox freezes and causes Windows to freeze for a while also. a

  • Issue in generating Invoice with standard and service material

    There is one scenario where along with standard material (i.e Tube bending machine) they charge the customer for the Design and Development of a machine (which is a service). Is it possible to make a standard order with the standard material(with exc

  • How to Execute WebDynpro Applications as Background Job ?

    Hi Gurus, We have developed a lot of WDJ applications with component reusage; ie, quite a lot of business logic are wrapped in WDJ Components which are re-used by other WD UIs. Now we'd like to automate some of the processes with background jobs and

  • X11 not working on Mac OSX 10.4.11

    The Mac OS X version is 10.4.11 X11 opens and then automatically shuts down. I tried the following already with no luck: Installed x11 from the Mac OSX Tiger DVD. Installed using the instructions on [url="http://roundhere.net/journal/install-x11-on-m

  • How to increase the image size of a digital signature

    No matter how large large I sign a piece of paper or how large a graphic file I use, or the format I save it as (PNG, PDF, JPG), when I go to actually place my signature in a signature box, the resulting image is tiny, as well as not terribly bold.