International Data Pack - Notifications Warnings and Alerts
I recently added an $85/300Mb International Data Pack to my iPad. I received no Activation Confirmation, no data usage notificationa at 50%, 85% etc, and no warnings on activation in a new country. I lie awake at night and ponder these things, and the answer is quite simple: If you apply for an International Data Pack to be applied to an iPad (and most likely any Mobile Broadband device) the Pack will be applied OK, and it will work OK, but you will never get any SMS notifications, usage warnings or new country cost alerts!!An iPad SIM is only a 3G device (or 4G on later models) Telstra SMS notifications are in the 2G band, actually not even 2 G, they are sent in the signalling channels associated with voice calls, so SMSs can not technically be received on a 3G/4G Only device such as an iPad!You can try it yourself, turn off any web based messaging such as “iMessage” and send an old fashioned SMS TXT from your phone to your iPad number - your iPhone will not mark it as “Not delivered” but your iPad will never receive it.ps - you dont actually need to turn off iMessage, you can not send an iMessage to your iPad number either!You will see some messages on your iPad, (including SMS messages) but these are messages to your iPhone and only where/when you have your iPad and iPhone messages synced.You will also note that if you turn off iMessage in you iPad settings, you have no options to send an old-fashioned SMS (Thats because it is not technically possible to send (or receive) an SMS from a 3G device!)Others may disagree, so I welcome any debate or alternate opinion
Help - I give up! The website on International Roaming with a pre-paid says: "Usage alertsWe’ll send SMS alerts to keep you up-to-date with your usage. Depending on your Pre-Paid set up you might receive multiple usage and pricing SMS alerts. There is no charge for receiving these SMS alerts.The alerts we’ll send:If you have an International Roaming data pack, we’ll send you an SMS when you’ve have used 50%, 85% and 100% of your data allowance.If you use 100% of your data allowance we’ll send you an SMS reminding you of the cost to use data while overseas.If you’ve set up a Balance Based Automatic Recharge we’ll send you an SMS for every $100 of International Roaming pay-as-you-go (PAYG) data you use.Please note: You can’t opt out of these SMS alerts." Ms_Megahurtz (below) advises me: "....This is why from MyAccount I went into the alerts and enabled email alerts for my iPad so I get those alerts relevant to my iPad Mini 3...." I have been into MyAccount a dozen times, but I can find no path to change any Telstra SMS Alerts (which you can not get on an iPad) to an email alert? I'm a simple emperor of the dark side and the forces of good seem to be prevailing against me, so can anyone help me with keystroke-by-keystroke instructions?
Similar Messages
-
Notification banners and alerts on dual displays
I have a mid-2011 MacBook Air connected through HDMI to a 24 in 1080p Asus external display. Notification banners and alerts will only show up on the Air display, and I would prefer to have them appear in the upper right corner on both displays. I haven't found any information through numerous Google searches, or among other Apple support discussions. Is there a setting or way to do this?
Thanks in advanceAs far as I can tell, the only control you have over where those banners and alerts appear on multiple displays is by changing which display is the "main" display. If you go into System Preferences > Displays, under the "Arrangement" tab, you can drag a little menu bar to one display or the other. In my tests, the alerts and banners always show up on whichever one has the menu bar in this preference pane.
-
Customize notifications (banners and alerts)
Is there any way one could make any notification in Mavericks interactive?
I started using Airmail instead of Mail.app and I noticed that you can customize the actions on the notification only if you use alerts. But they're annoying to me, since I have to manually dismiss them. So I thought maybe there's a way around.
So: can I make a notification interactive (using scripts or Automator, something) ? Can I make an alert to disappear on its own, to resemble a banner (again, using scripts or some Automator trick)?
Thanks.Hi There,
Can you please explain more and detailed, because the way that you explained, is really confusing. I have an Ipod Touch 4th generation, and if you go to Notifications, and click on the App that you want to be notified, it will say "Nothing, Banners, Alerts". Banners are at the top, and Alerts are boxes in the middle of the screen. If you want, you could ask support.
How to change Notifications:
Settings > Notifictions > (Pick the app you want to be notified) > Tap on None,Banners, or Alerts.
The support link is:
http://www.apple.com/ca/support/contact/ -
Notification Rules and Alerting
I created 5 rules from the section "Notification Rules" using same user ID.
Is it possible to alert different email groups for each notification rule from the same ID. We select "send e-mail" option from the Notification Rules section, we will be recieving alerts for the e-mail ID that was configured in the General Section under --> Preferences. How do we configure the rules to notify different group's using the same ID.
Thanks in advance.Hi Loc,
Can you please help me in finding the "Add Actions page (2nd step in The Edit rule set process)" I cannot find that option when I select the rule and say EDIT --> Actions page --> "E-mail notification, Advanced notofocation Methods and Clear Alert(These are only the options available in Actions page)".
Sorry for asking the basic stuff... FYI - I am actually using OEM 11.1.0.1 -
Persistent warnings and alerts in Snow Leopard
Ever since upgrading from 10.5.8 (via +Migration Assistant+ ), my various email accounts are alternatively showing that little warning triangle, and the account would be offline:
This happens upon launching Mail. It usually goes away after a few subsequent +Get All New Mail+ or when it checks for new messages every X minutes as set in the prefs. The Alert message is sometimes +"There may be a problem with the mail server or network. Verify the settings for account "blahblah" or try again. The server returned the error: "the connection to host mail.comcast.net on port 110 failed."+
So it seems a bit corrupt. Or unstable.
What's causing this? How can I improve it?Internet connection is always on. It's Comcast cable. And it happens every time I launch Mail, regardless of waking from sleep, freshly logging in or restarting then logging in.
-
i just bought the new iPad and even though notifications are set exactly the same for mail and my app is turned on and in the Notifications Center and alerts and sounds selected for mail and apps only my iPad 2 is working. No alerts on iPad 3. I see other posts with same problem. Any suggestions or posts re same problem will be appreciated before I return to Apple Store for help. thanks.
Do you have system sounds muted? Check the button above your volume control on the right hand side of the iPad. If, when you change the button you see mute on your screen, you'll restore system sounds. If you see lock orientation, you can restore system sounds by double tapping your home button to bring up the task bar (most recently used apps). With your finger swipe those apps all the way to the right to reveal a mute icon on the left. Touch that icon and you'll restore system sounds.
Let us know if that was the issue. -
Convert internation date to mm/dd/yyyy
I'm very new to Power Query so here goes.
In a query to a SQL server, the date field is set as an International Date format of yyyymmdd and I want to convert it to an American format of mm,dd,yyyy. Any help is greatly appreciated.
Thanks,
Leehi..,
You try to use below code:
let
Source = Table.FromList( { [Date=20140105],[Date=20140328],[Date=20140125],[Date=20140405] }, Record.FieldValues , {"Date"}),
ChangeText = Table.TransformColumns(Source, {"Date", each Text.Insert(Text.Insert( Number.ToText(_) ,4,"/"), 7,"/") } ),
ChangedType = Table.TransformColumnTypes(ChangeText,{{"Date", type date}})
in
ChangedType -
Receive two notifications (Warning and Critical) from Alert raised by Monitor
Hello,
Here's a problem. I use Windows OS management packs (for windows server 2003-2008-2012) and I need to create notification two times:
1. When logical disk free space monitor is in Warning state (changes state from Health->Warning)
2. When monitor changes state from Warning->Critical.
Now I can only set to Alert to be raised 1 time (Warning or Critical, Critical only), so notification reacts only one time. I created two notification subscription, but alert is raised only one time, and then only severity changes, notifications can't react
to this.
As far as i have read documentation, I will need to create custom monitor or rule for it, to create different alert.
I have tried to create Orchestrator Runbook with Get-Monitor element in it, but i cannot filter only 3 free space monitor that I need. It targets only Logical disk with some other monitors. SCOM Powershell Module also doesn't have needed tools to accomplish
this task.
Anyone has any ideas? Thanks in advance.SCOM 2012 R2 Update Rollup 4
MP: Windows Server 2012 Operating System (Monitoring)
Version: 6.0.7296.0
Windows 2012 Logical Disk Free Space Monitor
Alerts name, raised by this monitor - "Logical Disk Free Space is low"
I accomplished this task using SC Orchestrator. There you can use Get-Alert object to filter all alerts by name and warning severity, and then use it to send notifications. When monitor changes to Critical, in-SCOM Subscription can send notifications (you
just select critical severity option). -
since i have updated my iphone everytime i open an app it comes up with a message 'connect to itunes to use push notifications, may include alerts, sounds and icon badges, i have backed up my phone on itunes and restored phone but its still doing it can anyone help?
EmReturn the iPhone and get your money back. It has been
hacked/modified/jailbroken and likely cannot be made
operative. -
Is there a way to exclude specific calendars from Notifications and alerts?
I have 4 calendars: 1 Exchange and 1 Yahoo that includes 2 shared calendars (wife and MIL). I activate the Yahoo calendars only when I need them and do not need any yahoo reminders at all. When I swipe down the Notifications page, it includes all four calendars including the shared Yahoo calendars. What's worse, I get alerts from all four calendars.
I only want Exchange alerts and notifications. Is there a way to exclude the Yahoo calendars from Notifications and alerts?
Right now, the only way I can eliminate them is by deactivating the Yahoo account in Settings/Mail, Contacts, Calendars.Is there a way to only choose specific contacts from an existing group and add to a new group?
I mean there has be a faster way than typing everybody by hand.. -
The Message "Connect to iTunes to Use Push Notifications "BBC History Magazine" notifications may include alerts, sounds and icon badges" keeps coming up in Newstand, also happens with National Geographic Magazine. HELP!
I have now followed multiple instructions from this and other forums. have turned push notifications off. Turned them on. Have updated to IOS 6. Have signed out and signed back in, have uninstalled all magazines and reinstalled. Have synced, and updated everything in iTunes.
Nothing works,. Also cannot use youtube.Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
It might also be a good idea to contact Square for assistance. -
I changed my data plan from 6g to 8g while my daughter who attends college outside of the US at Toronto Canada (and we have on a international calling and international data plan) was on spring break at her grandparents house here in the US. I made the change online since I had been waiting on the phone for over 10 minutes for a customer service rep to come available. Well when I made the change online since that seems to be the thing that Verizon wants it's customers to do and I didn't see all the different plans available and just did the upgrade to 8g. Next bill had over $900 in roaming charges on her phone line. I called the 1-800 number and waiting for a service rep and after 20 minutes of waiting and being put on hold was told it was the customers mistake and there was nothing they could do.Thanks for nothing. I called back after thinking about it and wondered why changing a data plan for the phones in the US would change a international call plan. Waiting over 10 minutes again between waiting for a service rep and hold for one to answer the call. Gave her all the information about it and she said she would call back. Well, 4 days later over the weekend she had nevered called back. So on the phone again for the third time and after 20 plus minutes again was told that when I did it online I click the plan that didn't include international call only the data plan. Explained that I never saw the difference in the plan packages so put on hold again and was told that they could credit $100 to my bill. Wow, thanks alot !!! We have been Verizon customers for probably atleast 12 years and this is how you treat your long term customers?
Verizon Wireless Customer Support wrote:
AHARDY454,
We definitely want to review options on what has happened. We are now connection, so you can hover over my username and send me a Direct Meesage so we can review your account information. We look forward to reviewing.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport
TonyG_VZW they can't exactly hover over your username unless you actually link it in your post. The generic username for all the reps just doesn't fly. -
Convert internal table data to pdf format and send mail to Users
Hi all ,
I want to convert the data available in internal table to pdf format and then send it to mail .
Please tell me wht are the fn modules available to convert the data from internal table to pdf and then send it mail .
regards
santosh .Hi Santosh
Sending mail with attachment report in Background
Content Author: Fernando Faian
I have read the hint about "Sending mail with attachment report".
It's great, but how can I make this function work in background??
I had that needed last year too. See attachment a function group with two functions. The second one has that functionality to send email or fax (SAP office) with attachment objects in background job using SO_ATTACHMENT_INSERT function.
Pay attention because its working with output list from spool converted to pdf.
=================================================================================
z_send_email_fax_global
FUNCTION-POOL z_gfaian_mail_fax. "MESSAGE-ID ..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
lt_note_text LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
file(60) TYPE c,
END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id LIKE soodk,
object_id LIKE soodk,
link_folder_id LIKE soodk,
g_document LIKE sood4,
g_header_data LIKE sood2,
g_folmem_data LIKE sofm2,
g_header_data LIKE sood2,
g_receive_data LIKE soos6,
g_ref_document LIKE sood4,
g_new_parent LIKE soodk,
l_folder_id LIKE sofdk,
v_email(50).
DATA: hd_dat like sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE 'X',
store_flag LIKE sonv-flag,
delete_flag LIKE sonv-flag,
owner LIKE soud-usrnam,
on LIKE sonv-flag VALUE 'X',
sent_to_all LIKE sonv-flag,
g_authority LIKE sofa-usracc,
w_objdes LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
real_type LIKE sood-objtp,
attach_type LIKE sood-objtp,
otf LIKE sood-objtp VALUE 'OTF', " SAPscript Ausgabeformat
ali LIKE sood-objtp VALUE 'ALI'. " ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg VALUE 'O',
c_objtp LIKE g_document-objtp VALUE 'RAW',
c_file_ext LIKE g_document-file_ext VALUE 'TXT'.
=================================================================================
z_send_email_fax2
FUNCTION z_faian_mail_fax2.
""Interface local:
*" IMPORTING
*" REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*" REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
*" REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
*" TABLES
*" LT_BODY_EMAIL STRUCTURE SOLI
*" EXCEPTIONS
*" ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc NE 0.
RAISE err_no_abap_spooljob. "doesn't exist
ELSE.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = 'OTF'.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
method = 'SAVE'
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
objcont = lt_body_email
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
CLEAR lt_rec_tab.
lt_rec_tab-sel = 'X'.
lt_rec_tab-recesc = object_type. "This field for FAX/MAIL
lt_rec_tab-recnam = 'U-'.
lt_rec_tab-deliver = 'X'.
lt_rec_tab-not_deli = 'X'.
lt_rec_tab-read = 'X'.
lt_rec_tab-mailstatus = 'E'.
lt_rec_tab-adr_name = fax_mail_number.
lt_rec_tab-sortfield = fax_mail_number.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-sortclass = '5'.
APPEND lt_rec_tab.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-recesc = object_type.
lt_rec_tab-sndart = 'INT'.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
lt_files-file = c_file.
APPEND lt_files.
begin of insertion by faianf01
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
end of insertion by faianf01
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
check_send_authority = 'X'
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDIF.
ENDFUNCTION.
=================================================================================
z_send_email_fax
FUNCTION ZCBFS_SEND_MAIL.
""Interface local:
*" IMPORTING
*" REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*" REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" TABLES
*" LIST_FAX_MAIL_NUMBER STRUCTURE SOLI
*" EXCEPTIONS
*" ERR_NO_ABAP_SPOOLJOB
DATA: vg_achou(1) TYPE n.
Fist part: Verify if the spool really exists
vg_achou = 1.
DO 60 TIMES.
SELECT SINGLE * FROM tsp01 WHERE rqident = src_spoolid.
IF sy-subrc IS INITIAL.
CLEAR vg_achou.
EXIT.
ELSE.
WAIT UP TO 1 SECONDS.
ENDIF.
ENDDO.
IF vg_achou = 1.
RAISE err_no_abap_spooljob. "doesn't exist
ENDIF.
client = tsp01-rqclient.
name = tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = 'OTF'.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
method = 'SAVE'
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
LOOP AT LIST_FAX_MAIL_NUMBER.
lt_rec_tab-recextnam = LIST_FAX_MAIL_NUMBER-LINE.
lt_rec_tab-recesc = 'U'.
lt_rec_tab-sndart = 'INT'.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
ENDLOOP.
lt_files-file = c_file.
APPEND lt_files.
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDFUNCTION.
Regards,
Sree -
Change Weather Data Source in Notification Center and Siri
The data coming from Yahoo into the Weather app and iOS Notification Center says the temperature is 37f and the low/high for today is 43f/58f! Even the Yahoo Weather web site has the funky data. My other weather apps show the correct temperature which is 48f.
Is there a way to include a different weather/temperature source in the Notification Center and for Siri?The naitive weather app is the only weather app that you can have for the scroll in the notification center. Siri will check all its sources for weather related questions.
-
Get notification and Alerts for security events
Hi
I have LMS3.1 and I need to be notified and alerted by any security issues may logged at the router and switches such as port security and DHCP SNOOPING DENY events.
Many thanks.
CheersThere are several methods of doing this.
1. Have you heard of Cisco Notification Service?
2. Have you tried RSS?
If you want to receive RSS feeds from Cisco Security Advisories, Responses, and Notices then the RSS address HERE.
If you want to receive RSS feeds from Cisco Security Notices then the RSS address HERE.
Maybe you are looking for
-
Routine not getting called during Batch job posting of Shipment costs
Hi, We have a routine created and attached to the condition type in the condition base type of shipment cost procedure.When the shipment cost is created by running a batch job (VI06) , the value posted is the initial value determined withourt routin
-
My wishlist is not working in the app store on my ipad it is woking fine in itunes store so i can add films and music but the icon "add to wish list" is not available on the app store so does anyone know how to fix this
-
last night I attempted to burn again via your advice on link--"http://discussions.apple.com/thread.jspa?messageID=1610170?" When idvd was finished with burn it said "burn failure". Would you no if it's because I'm burning my saved idvd project from t
-
Reg : AUTH_CHECK_TCODE
Hi, I want to know how this "Call AUTH_CHECK_TCODE" for for authorization check works. How to see...the code written aganist this function "AUTH_CHECK_TCODE". Can somebody.....throw light on the above..... Regards, K Vijayasekar.
-
Hi, I should install ORACLE. The processor is : Xeon E5420 2.5Ghz/2x6MB 1333FSB is it 32 bits or 64 bits ? How to know ? thank you.