International Independent Publishers when/how they can join the iBookstore?
Hello everybody
Independent Publishers they can join iBookstore, if they have a US Tax ID.
But the International Independent Publisher we can't.
We know that publishers outside the USA and Apple haven't reach a agreement yet.
In many countries still we don't have the iPad but we try to get ready. In the second iPad launch the iBookstore was openin in 9 more countries (Australia, Canada, France, Germany, Italy, Japan, Spain, Switzerland and the U.K. and in July will follow Austria, Belgium, Hong Kong, Ireland, Luxembourg, Mexico, Netherlands, New Zealand and Singapore)
How is the situation there?
I f you are a publisher and you will like to share some information, please use this open forum.
Thanks!
Every international (non-US) company should be able to get an EIN from the IRS without an issue. You might need to prove that you are in fact a legally established company (Inc, Ltd, SA, AG, GmbH, sprl, ...) but just fill out the SS4 form available on the IRS website.
We requested our EIN about 10 year ago (for other purposes) using a faxed SS4 form. The IRS did not reply to us, but when we phoned them a while later they gave us one on the spot.
Similar Messages
-
how do i find previous owner of iphone 5 so they can take the phone i bought off craigslist and take it off their account so i can use it.
The same way you found them to buy it - use whatever means you
used to accomplish the purchase on craigslist.
Apple cannot/will not give you the information about any previous
owner(s) of the iPhone.
When/if you do contact them, here is what the previous owner needs
to do:
Backup the device to iTunes or iCloud, if desired: http://support.apple.com/kb/ht1766
Settings > Messages > iMessage > Off
Settings > FaceTime > Off
Settings > iCloud > Delete Account (this only unregisters and deletes it off the iPhone)
Settings > General > Reset > Erase All Content and Settings
More Info... http://support.apple.com/kb/HT5661
(thanks to paulcb for the wording) -
Hi
I whis to know how i can configure the WLC (2500) for reduce the time of responce between Two Lightweight APs (1040 and 1602) if one of they are disconnected for any reason (energy, malfunction, etc.) for the reconnection of the clients.
I realized the next test: I have 2 APs connected, connect my laptop to the AP 1602 and start to making a TFTP transfer between my laptop and a server, then disconnect the AP 1602 and showing the laptop, the laptop makes the change to AP 1040, but the connection to the service, the TFTP transfer is cut because it takes about 30 seconds to resume the connection with the network
How i can reduce this time, because my clients want their connection is not lost when passing a situation similar, i look in the pages of cisco but did not find any information pudisese help me, any help is welcome.
thank you very much in advance
JonathanNot much you can do as its up to the client card to know it has no network connectivity and then to try to associate and obtain a DHCP address again. This is client dependent.
Sent from Cisco Technical Support iPhone App -
How do I share a color-coded Outlook calendar with others in my office that they can see the colors too?
Hi,
How do you color code the calendar items? From conditional formatting or from categories?
Please make sure the user has been given reviewer or higher calendar permission to view items colors in Outlook. About how to share calendar in Outlook, please refer to:
http://office.microsoft.com/en-001/outlook-help/share-an-outlook-calendar-with-other-people-HA010354420.aspx
Regards,
Winnie Liang
TechNet Community Support -
When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?
You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'. When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone' Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted. This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.
-
Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?
When you save a file that's what options offers application
05 мая 2014 г., в 13:40, Jacob Bugge <[email protected]> написал(а):
sage go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click theStop Email Notifications link. -
im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
this says it all..Welcome to the Apple Community.
Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive. -
how i can increase the volume when i playing a video? dont showing the volume control in the video player..
Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.
-
My volume buttons won't work. Music plays when I get a phone call. That is the only time my speaker makes noise. My settings are how they should be, the top button is not on silent, I've shut my phone off many times, I've totally restored my phone. Help
Genius reservation http://www.apple.com/retail/geniusbar/
-
When I switch libraries I "lose" the majority of the material in my main library (or at least I can't see it) and can only restore it by repairing the database. Can anyone tell me why this is happening and how I can resolve the problem? Thanks
I seem to have found a way around it. Rather than switching libraries by going into files/switch libraries I used Aperture Preferences to change them. I've done it a couple of times and it appears to work OK.
That is an interesting finding. It suggests, that your "Preferences" file "com.apple.Aperture.plist" may have been corrupted and you fixed it this way. Can you now switch between libraries the usual way? If not, I'd try to remove the "preferences" file from the user library to the Desktop and relaunch Aperture.
The Aperture 3: Troubleshooting Basics:http://support.apple.com/kb/HT3805
describe how to remove the user preferences. -
When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the file name being changed during this downloading process?
Hi Glenyse,
Here are my steps.
1. I upload multiple image (jpg) files onto my photo album.
2. I select the "sharing" by email option for this album.
3. I enter the recipient's email address.
4. The recipient receives my message and clicks on the link.
5. The recipient accesses my photo album and clicks on one of the images.
6. The image opens up to its own screen.
7. The recipient selects the "download" and then save file option.
Here is the part I do not understand. For some reason, during this "download" process, the original name which I have given to the file is replaced by different name. So I was hoping that someone knows how to prevent the file name from being changed during the "download and save" process.
Much appreciated if you can help me find a solution to this problem.
Mary -
I have 2 children with iPods and I need to create 2 different accounts for them so they can play the same games. How do I do this?
To restore the classic menu bar, you can do any of these:
orange Firefox button > Options > Menu Bar
tap the Alt key > View > Toolbars > Menu Bar
right-click a blank area of the tab bar or navigation bar > Menu Bar -
i recently purchased used macbook pro 15" but unfortunately i erase the harddisk and did not have back up but when i try to reinstall the mac os x lion it ask me the id password,how i can purchse the mac os x lion.
where from i can buy the mac os x lion because i am using windows base system when i try to buy from apple web side it show in app store only not in itunesHave you tried booting from the Recovery HD to reinstall Lion?
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
You will need the Apple ID and password used to purchase Lion. If you have not purchased Lion, then you will need to purchase the Snow Leopard DVD and install Snow Leopard then update it to 10.6.8 to access the App Store where you can purchase and download Lion under your own Apple ID. Or you can purchase the Apple USB Lion installer flash drive at any local Apple retailer or the Online Store. -
How we can see the abap memory data
How we can see the abap-memory data
fine the code below
import lsind
report_title
table_name
report_field
change_display
show_hide
conversion_exits
table_description
form_program
select_form
update_form
line_size
line_count
records[]
fields[]
header_fields[]
select_fields[]
xrep[]
from memory id 'LZUT5U11'.
Regards
santhosh
mail-id : [email protected]Dear Santosh,
ABAP MEMORY:
A logical memory model illustrates how the main memory is distributed from the view of executable programs. A distinction is made here between external sessions and internal sessions .
An external session is usually linked to an R/3 window. You can create an external session by choosing System/Create session, or by entering /o in the command field. An external session is broken down further into internal sessions. Program data is only visible within an internal session. Each external session can include up to 20 internal sessions (stacks).
Every program you start runs in an internal session.
All "squares" with rounded "corners" displayed in the status diagram represent a set of data objects in the main memory.
The data in the main memory is only visible to the program concerned.
CALL TRANSACTION and SUBMIT AND RETURN open a new internal session that forms a new program context. The internal sessions in an external session form a memory stack. The new session is added to the top of the stack.
When a program has finished running, the top internal session in the stack is removed, and the calling program resumes processing.
The same occurs when the system processes a LEAVE PROGRAM statement.
LEAVE TO TRANSACTION removes all internal sessions from the stack and opens a new one containing the program context of the calling program.
The ABAP memory is initialized after the program is called. In other words, you cannot transfer any data to a program called with LEAVE TO TRANSACTION via the ABAP memory.
SUBMIT replaces the internal session of the program performing the call with the internal session of the program that has been called. The new internal session contains the program context of the called program with which it is performed.
When a function module is called, the following steps are executed:
A check is made to establish whether your program has called a function module of the same function group previously.
If this is not the case, the system loads the associated function group to the internal session of the calling program as an additional program group. This initializes its global data.
If your program used a function module of the same function group before the current call, the function module that you have called up at present can access the global data of the function group. The function group is not reloaded.
Within the internal session, all of the function modules that you call from the same group access the global data of that group.
If, in a new internal session, you call a function module from the same function group as in internal session 1, a new set of global data is initialized for the second internal session. This means that the data accessed by function modules called in session 2 may be different from that accessed by the function modules in session 1.
You can call function modules asynchronously as well as synchronously. To do so, you must extend the function module call using the addition STARTING NEW TASK ''. Here, '' is a symbolic name in the calling program that identifies the external session, in which the called program is executed.
Function modules that you call using the addition STARTING NEW TASK '' are executed independently of the calling program. The calling program is not interrupted.
To make function modules available for local asynchronous calls, you must identify them as executable remotely (processing type: Remote-enabled module).
There are various ways of transferring data between programs that are running in different program contexts (internal sessions). You can use:
(1) The interface of the called program (standard selection screen, or interface of a
subroutine, function module, or dialog module)
(2) ABAP memory
(3) SAP memory
(4) Database tables
(5) Local files on your presentation server.
For further information about transferring data between an ABAP program and your presentation server, refer to the documentation for the function modules WS_UPLOAD and WS_DOWNLOAD.
Function modules have an interface, which you can use to pass data between the calling program and the function module itself (there is also a comparable mechanism for ABAP subroutines). If a function module supports RFC, certain restrictions apply to its interface.
If you are calling an ABAP program that has a standard selection screen, you can pass values to the input fields. There are two options here:
By using a variant of the standard selection screen in the program call
By passing actual values for the input fields in the program call
If you want to call a report program without displaying its selection screen (default setting), but still want to pass values to its input fields, there is a variety of techniques that you can use.
The WITH addition allows you to assign values to the parameters and select-options fields on the standard selection screen.
If the selection screen is to be displayed when the program is called, use the addition: VIA SELECTION-SCREEN.
Use the pattern button in the ABAP Editor to insert a program call via SUBMIT. The structure shows you the names of data objects that you can complete with the standard selection screen.
For further information on working with variants and further syntax variants for the WITH addition, see the key word documentation in the ABAP Editor for SUBMIT.
You can use SAP memory and ABAP memory to pass data between different programs.
The SAP memory is a user-specific memory area for storing field values. It is available in all of the open sessions in a user's terminal session, and is reset when the terminal session ends. You can use its contents as default values for screen fields. All external sessions can access SAP memory. This means that it is only of limited use for passing data between internal sessions.
The ABAP memory is also user-specific, and is local to each external session. You can use it to pass any ABAP variables (fields, structures, internal tables, complex objects) between the internal sessions of a single external session.
Each external session has its own ABAP memory. When you end an external session (/i in the command field), the corresponding ABAP memory is released automatically.
To copy a set of ABAP variables and their current values (data cluster) to the ABAP memory, use the EXPORT TO MEMORY ID statement. The (up to 32 characters) is used to identify the different data clusters.
If you repeat an EXPORT TO MEMORY ID statement to an existing data cluster, the new data overwrites the old.
To copy data from ABAP memory to the corresponding fields of an ABAP program, use the IMPORT FROM MEMORY ID statement.
The fields, structures, internal tables, and complex objects in a data cluster in ABAP memory must be declared identically in both the program from which you exported the data and the program into which you import it.
To release a data cluster, use the FREE MEMORY ID statement.
You can import just parts of a data cluster with IMPORT, since the objects are named in the cluster.
In the SAP memory, you can define memory areas (SET/GET parameters, or parameter IDs), which you can then address by a name of up to 20 characters.
You can fill these memory areas either using the contents of input/output fields on screens, or using the ABAP statement:
SET PARAMETER ID '' FIELD .
The memory area with the name now has the value .
You can use the contents of a memory area to display a default value in an input field on a screen.
You can also read the memory areas from the SAP memory using the ABAP statement GET PARAMETER ID FIELD . The field then contains the value from parameter .
The link between an input/output field and a memory area in SAP memory is inherited from the data element on which the field is based. You can enable the set parameter or get parameter attributes in the input/output field attributes.
Once you have set the Set parameter attribute for an input/output field, you can fill it with default values from SAP memory. This is particularly useful for transactions that you call from another program without displaying the initial screen. For this purpose, you must activate the Set parameter functionality for the input fields of the first screen of the transaction.
You can:
(1) Copy the data that is to be used for the first screen of the transaction to be called to the parameter ID in the SAP memory. To do so, use the statement SET PARAMETER immediately before calling the transaction.
(2) Start the transaction using CALL TRANSACTION or LEAVE TO
TRANSACTION . If you do not want to display the initial screen, use the AND
SKIP FIRST SCREEN addition.
(3) The system program that starts the transaction fills the input fields that do not already have default values and for which the Get parameter attribute has been set with values from SAP memory.
The Technical information for the input fields in the transaction you want to call contains the names of the parameter IDs that you need to use.
Parameter IDs should be entered in table TPARA. This happens automatically if you create them via the Object navigator.
Programs that you call using the statements SUBMIT , LEAVE TO TRANSACTION , SUBMIT AND RETURN, or CALL TRANSACTION run in their own SAP LUW, and update requests receive their own update key.
When you use SUBMIT and LEAVE TO TRANSACTION , the SAP LUW of the calling program ends. If no COMMIT WORK statement occurred before the program call, the update requests in the log table remain incomplete and cannot be processed. They can no longer be executed. The same applies to inline changes that you make using PERFORM … ON COMMIT.
Data that you have written to the database using inline changes is committed the next time a new screen is displayed.
If you use SUBMIT AND RETURN or CALL TRANSACTION to insert a program and then return to the calling program, the SAP LUW of the calling program is resumed when the called program ends. The LUW processing of calling and called programs is independent.
In other words, inline changes are committed the next time a new screen is displayed. Update requests and calls using PERFORM ... ON COMMIT require an independent COMMIT WORK statement in the SAP LUW in which they are running.
Function modules run in the same SAP LUW as the program that calls them.
If you call transactions with nested calls, each transaction needs its own COMMIT WORK, since each transaction maps its own SAP LUW.
The same applies to calling executable programs, which are called using SUBMIT AND RETURN.
The statement CALL TRANSACTION allows you to
Shorten the user dialog when calling using CALL TRANSACTION USING .
Determine the type of update (asynchronous, local, or synchronous) for the transaction called. For this purpose, use the addition CALL TRANSACTION USING UPDATE 'update_mode', where update_mode can have the values a (asynchronous), L (local), or S (synchronous).
Combining the two options enables you to call several transactions in sequence (logical chain), to reduce their screen sequence, and to postpone processing of the SAP LUW 2 until processing of the SAP LUW 1 has been completed.
When you call a function module asynchronously using the CALL FUNCTION STARTING NEW TASK ' ' statement, it runs in its own SAP LUW.
Programs that are executed with a SUBMIT AND RETURN or CALL
TRANSACTION statement starts their own LUW processing. You can use these to perform nested (complex) LUW processing.
You can use function modules as modularization units within an SAP LUW.
Function modules that are called asynchronously are suitable for programs that allow parallel processing of some of their components.
All techniques are suitable for including programs with purely display functions.
Note that a function module called with CALL FUNCTION STARTING NEW TASK is executed as a new logon. It, therefore, sees a separate SAP memory area. You can use the interface of the function module for data transfers.
Example: In your program, you want to call a display transaction that is displayed in a separate window (amodal). To do so, you encapsulate the transaction call in a function module, which you set as to Remote-enabled module. You use the function module interface to accept values that you write to the SAP memory. You then call up the transaction in the function module using CALL TRANSACTION AND SKIP FIRST SCREEN. You call the function module itself asynchronously.
Type ‘E' locks for nested program calls may be requested more than once from the same object. This behavior can be described as follows:
Lock entries from function modules called synchronously increment the cumulative counter, And are therefore successful.
Lock entries from programs called with CALL TRANSACTION or SUBMIT
AND
RETURN is refused. The object to be locked by the called program is displayed as already Locked by another user.
Programs that you call using SUBMIT or LEAVE TO TRANSACTION cannot come into conflict with lock entries from the calling program, since the old program ends when the call is made. When a program ends, the system deletes all of the lock entries that it had set.
Lock requests belonging to the same user from different R/3 windows or logons are treated as lock requests from other users.
Regards,
Rajesh.
Please reward points if found helpful. -
How i can show the selection screen input field in the top of page in alv
hi ,
how i can show the selection screen input field in the top of page in alv grid output.
tell me the processHi,
excample from my program:
FORM topof_page.
DATA: l_it_header TYPE TABLE OF slis_listheader WITH HEADER LINE,
l_info LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
if not &1 is initial.
clear l_it_header.
l_it_header-typ = 'S'.
l_key = '&1'.
translate l_key to upper case.
read table l_it_textpool with key key = l_key.
if sy-subrc = 0.
shift l_it_textpool-entry left deleting leading space.
l_it_header-key = l_it_textpool-entry .
endif.
loop at &1.
case &1-option.
when 'EQ'
or 'BT'
or 'CP'.
write &1-low to l_it_header-info.
when others.
write &1-low to l_it_header-info.
concatenate &1-option
l_it_header-info
into l_it_header-info
separated by space.
endcase.
if not &1-high is initial.
write &1-high to l_info left-justified.
concatenate l_it_header-info
l_info
into l_it_header-info
separated by space.
endif.
if &1-sign = 'E'.
concatenate ']'
l_it_header-info
into l_it_header-info.
endif.
append l_it_header.
clear: l_it_header-key,
l_it_header-info.
endloop.
endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
s_trmext,
s_trmint,
s_fkdat,
s_delno,
s_vbeln,
s_deact,
s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole
Maybe you are looking for
-
Which files to save prior to formatting?
Hi there! I am going to format Windows 7 today and I would like to know which files and folders I need to save for one of my premiere pro projects to be able to re open it once Windows has been reinstalled? Do I need the preview files and encoded fil
-
I have been having some issues in my iMac 2012, with the noise reduction feature. I have a MBP retina display that in system preferences has the noise reduction feature. However, in the new iMac 2012, I don't see that feature. Plus, I have been havin
-
II'm trying to edit a weekly event but when I attempt to delete the event iCal crashes. I've tried deleting both a single and all events and it still crashes. I'm running 8.1.2 on my iPad and iPhone, both crash. With the app crashing on both devices,
-
Hello, the contact groups I see in iSync do not match with my addressbook! How can i get this information in sync? Thanks Stephan O.
-
hi, i have activated enhanced model of WCM (work clearance management) and finished all relevant configuration.. still i am not able to create WCM Objects like 1. work approvals 2. Applications 3. operation documents. during creation of these above m