International message to China mobile doesn't work

I have switched to iphone 4 in July 2010. International message to China mobile had been fine until Oct 2nd. Since Oct 2nd, I can send text message to China Mobile but they only can receive message in English but Chinese. Even worse since today (Oct 11th), they can't receive any messages (neither English nor Chinese). When users send messages to my iphone 4, they always get "We have received testing message" as an automatic reply. I have called couple of friends located in different cities in US. They all have exact same problem. Is this caused by AT&T or by Apple iPhone 4 firmware? Please help!!!!

Same as mine. I have started to get this problem since from October 1st. The weired thing is that I still can communicate with my friends in Taiwan by texting Chinese message. However, my friends in China can send any message to me but cannot get any Chinese message from me. I made couple of calls to AT&T for check recently and everything with my account is fine. I would like to know what the problem is too.
iPhone 3GS, version 4.1

Similar Messages

Hyperlink to message in Alret email doesn't work

hi all,
In our dev environment, the hyperlink in the alert email for message in RWB doesn't works by clicking, although the copy pasting the link in IE takes me to correct message in RWB.
When i noticed, the message id is not part of hyperlink. Can any one suggest how to fix it so that message id also becomes part of hyperlink.
Regards,
-Kulwant

Hello
Check the notes below:
1549102 "Message monitoring" link is interrupted in alert e-mail
1421431 Message Monitoring Link in Alert inbox
If these do not help, please post what XI version and SP release you are using.
Regards
Mark

China Subscription Doesn't Work :-(

I have just bought a Hong Kong S.A.R , China Unlimited min 3 months subscription (#54073624) and it doesn't work when I phone China or Hong Kong.
Any ideas why not?

When I check the available subscriptions for China, I can see there is the one you have bought, Hong Kong S.A.R., China, which includes numbers starting with +852 and another one that includes calls to numbers starting with +86. To also be able to call numbers starting with +86, you'll need a second subscription.

Satellite P10, internal keyboard: The pipe key doesn't work anymore

Hello everybody!
I have a Satellite P10 with WinXP(SP1) for ca. 1 year.
Symptoms: It's about the internal keyboard. I've used the pipe key <|> indeed not everyday, but it worked. And suddenly I see that it's not doing anymore: it's "dead", whereas all other keys are working properly...
My following steps:
1) I've deinstalled the standard keyboard driver (101/102 keys) or Microsoft Natural Keyboard (PS/2), and it was successfully found after Windows starting up. There is no hardware conflict according to the Device Manager or System Information, the driver is running properly...
2) The keyboard layout is German. But I've tested already the English (US) one too: the result is the same.
Questions:
1) Is the key physically damaged?
2) If not, what can I do to fix the problem? Where can I get maybe a newer driver?
Thanks in advance!
Message was edited by: MischaG

Hello Mischa
If you can not use the button at all I assume that the button is defective. It is not known to me that driver update can has influence on just several buttons.
If the unit is about 1 year old the warranty is still valid. You can contact service partner and let them exchange the keyboard.
Bye

Internal Microphone in Lenovo T400 - Doesn't work

Hello everyone!
Thanks for your attention and reading this thread,
Since I made a rescue and recovery from my laptop, after a while I did it, my internal microphone stopped working, and yesterday with Lenovo online support we did everything in hand to try and solve it but apparently the next step is to take it to technical support and frankly that takes a lot of time not to mention the problems I have with them after it such as lots of missing screws in the laptop frame.
What we did was to test it, uninstall the Conexant driver, download new one, install, update Windows, nothing fixed it.
However, as a suggestion I did another recovery again, but Microphone is still dead.
The external microphone works perfectly.
And since I've been reading that other people have the same problem, from what I can see it just seems to be a Conexant software problem?
I've got Windows 7 Pro, Lenovo T400, High Definition Audio (after I uninstalled Conexant and still no luck with internal microphone of High Audio?) I don't know what other information can be useful to solve this?
Is it possible that a Windows setting is interefering?
Thank you very much for your response,
Sincerely,
Eduardo

Maybe the hardware broke? Get an Ubuntu live USB or live CD and boot into it. Try to record sounds from there.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Extension Mobility doesn't work

Hello,
I want to implement Extension Mobility service. I have followed the setup step by step. But when I select my login/logout service, I receive an error "Login Insuccessful" Error: [6].
The IP Phone doesn't prompt me to enter my UserID and PIN.
In the EM Traces I have:
%EMApp-3-UNK:Error while getting dir handle: DirUser.OperationError
%EMApp-3-UNK:Unable to establish dir connection :DirUser.OperationError
For information the CCM are not yet registered to the DNS and I used the LMHOST file.
Thanks you for your help,
Regards,
JPB

Its very likely the CCMSysUser user account password has not been updated on Callmanager and AD server and you may be having authentication problems between the ip phones services on Callmanager to Active Directory.

Error updating .mac message...FIx doesn't work???

I get the "there was an error updating .mac" error message when trying to publish my website. I've tried the File > Publish all to .mac route and I still get the same error message. Any ideas what I do now? Any other suggestions or alternatives?

I get the "there was an error updating .mac" error message when trying to publish my website. I've tried the File > Publish all to .mac route and I still get the same error message. Any ideas what I do now? Any other suggestions or alternatives?

New mail message, tab to body doesn't work

I have an Automator app. on my desktop that jsut creates a new mail message. It does not pre-fill any information, just a new, blank mail message.
The problem is, I can type the recipients address, tab to the Subject and type that. Then, when I try to tab to the message area or body, it just highlights the Subject and will not tab forward.
Any ideas?

The bug affects all applications that interact with Mail by way of Apple Events. Such apps as iPhoto, Automator, and AppleScript all use Apple Events to compose the buggy message. Until Mail's AE behavior is fixed, the only things I can offer are workarounds.
The previous script merely emulates user input instead of sending Apple Events. This is a bit of a kludge, and on second read a more precise solution would have been to invoke a blank mailto link:
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">open location "mailto:"</pre>A workaround for your iPhoto-to-Mail bridge would be very difficult to conjure (if it's even possible) and unreliable at best. :\

DNS : simple internal network, no router. Doesn't work

Ok. Here is the deal. I've read many articles (including the excellent one from the famous MrHoffman) but I'm stuck. No documentation really deals with my situation.
I have a MacMini with 10.6 Server for a local network. I don't want an internet connection on it. I have a network switch and that's it. I just need a few machines to connect to this super local network (with DNS).
Server IP settings (manual)
IP : 10.0.0.11
Mask : 255.255.255.0
Router : void
DNS : 10.0.0.11 (i've tried with 127.0.0.1... same)
Domains : training
I have a primary DNS zone "training" with this server in it (and I remove the server original one after the installation). The nameserver is also set with the IP address (like recommended wisely by MrHoffman). The changeip command is a success. Network Utility lookups (direct and reverse) are fine.
But... when I plug another machine in the switch with a manual IP (let's say 10.0.0.200), 255.255.255.0, no router, dns=10.0.0.11, domain = training : I can ping the server (obviously) but lookups DON'T work.
I really don't understand. That's the simplest setup ever (2 machines and 1 switch) and DNS is not active...
So... any idea about what I forgot ?
Thanks in advance.

So that I may update the web site article, why do you think what I've posted isn't this case and this configuration?
I'd expect hostname.training. as an FQDN here, if you're inventing your own domain, and thus your zone would be training (training.) for that.
The usual trigger for the failure you're describing here is that your client isn't using your DNS server for its DNS resolution; that your client is getting its DNS server address from your DHCP server (often embedded within a firewall) and your firewall (or whatever is providing DHCP server) isn't configured to pass out your new DNS server address. Or it is, and your client hasn't picked up the change yet.
To test this guess, check the controller settings for the DNS server setting, and try a command-level dig command:
dig @10.0.0.11 hostname.training

Mobility: doesn't work with Android

Scenario:
2 Lync 2013 FE pool (no director)
1 Edge pool
IIS ARR used for publishing
autodiscover on HTTP only as there are many SIP domains
lyncdiscover.domainFQDN is not a CNAMEto webexternal.domainFQDN but a A record
IIS ARR is configured like this:
Default Web Site
lyncdiscover.domainFQDN port 80
webexternal01.domainFQDN port 443
webexternal02.domainFQDN port 443
everything is pretty fine with Windows Phone and IOS; with Android it's OK when using manual configuration whereas it's KO using autodiscover
we've got CU5 on Lync Server. the login succeeds in a different environment with the same CU5 installed (and same mobile device)
android is 4.2.2 with the last Lync 2013 mobile app installed
any hint appreciated :)

Hi,
Please try to disable the passive authentication for a registrar and then test again.
Please also make sure Lync Server and Lync Android client update to the latest version.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

My Apple ID is changed from hotmail domain to icloud how come? and my mobile now doesn't work

I have iPhone 4 i make rest to delete data my Apple id: ****** the mobile change the domain to the same usr name @icloud.com how come? and my mobile doesn't work now and my recovery email dont work also. how can i activate my iPhone and use it pls?
<Email Edited By Host>

Contact iTunes by:
Contact iTunes

XPath: doesn't work for SOAP message?

My method
 * Get value of the node specified by an XPath.
 * @param item The starting context (e.g. document, node, node list).
 * @param xPath XPath to select single node value (e.g. "/root/data/value[1]/text()")
 * @return Result of xPath (the node's value) or null if failed.
 * @throws XPathExpressionException if xPath is wrong.
 static public String getXPathValue(Object item, String xPath) throws XPathExpressionException {
 String result = null;
 if (item != null && xPath != null) {
 try {
 result = XPathFactory.newInstance().newXPath().evaluate(xPath, item);
 } catch (NullPointerException npe) {
 //XPathFactory.newInstance() throws NullPointerException when called from ActiveX bean
 if (item instanceof Document) {
 result = getXPathValueApache((Document) item, xPath);
 }//else: input values not available
 return result;
 }//getXPathValue()works good enough for plain XML files (no namespaces). Now I have a SOAP XML message and my XPath doesn't work with this code - but it works with other XPath tools or my old Apache method:
 * Get value of the node specified by an XPath.
 * @param document Document to get node value of.
 * @param xPath XPath to select single node value (e.g. "/root/data/value[1]/text()")
 * @return Result of xPath (the node's value) or null if failed.
 * @throws org.w3c.dom.xpath.XPathException if XPath result object is not of type XPathResult.
 * @see <a href="http://www.w3schools.com/xpath/default.asp">XPath Tutorial</a>
 static private String getXPathValueApache(Document document, String xPath) throws org.w3c.dom.xpath.XPathException {
 String result = null;
 if (document != null && xPath != null) {
 org.w3c.dom.xpath.XPathEvaluator evaluator = new org.apache.xpath.domapi.XPathEvaluatorImpl(document);
 Object o = evaluator.evaluate(xPath, document, evaluator.createNSResolver(document), org.w3c.dom.xpath.XPathResult.FIRST_ORDERED_NODE_TYPE, null);
 if (o != null) {
 if (o instanceof org.w3c.dom.xpath.XPathResult) {
 org.w3c.dom.xpath.XPathResult xpResult = (org.w3c.dom.xpath.XPathResult) o;
 Node node = xpResult.getSingleNodeValue();
 if (node != null) {
 result = node.getNodeValue();
 } else {
 throw new org.w3c.dom.xpath.XPathException(org.w3c.dom.xpath.XPathException.TYPE_ERR, "XPath '"+xPath+"' didn't return an object of type XPathResult!");
 }//else: no result for XPath
 }//else: input values not available
 return result;
 }//getXPathValue()The XPath is quite simple and I also had it in 2 ways: short and long:
//rsp:SessionId[1]/text()
/SOAP:Envelope/SOAP:Header/rsp:Response/rsp:SessionId/text()
Why doesn't this work with the standard
XPathFactory.newInstance().newXPath().evaluate(xPath, item)
?

Hi,
I have cancelled your Export PDF subscription for the order no.AD013879714.
Your refund no.is 66181172.
You will get the refund in 7 business days.
Regards,
Florence

IPhone 4s and China Mobile "welcome message" issue

Hi there,
I've bought iPhone 4s and use it with China Mobile sim here in China.
I'm experiencing a very annoying issue that makes my new iPhone 4s almost unusable: every now and then (pretty often actually even several times a minute sometime) I keep on receiving a "welcome message" from China mobile on a black screen with "cancel" and "accept" buttons in the bottom (see picture)
The message says "Dear customer: thanks for chosing China Mobile, China Mobile wishes you a great success" (or something like that, I got it translated by a colleague).
The annoying part is that this message keeps on popping up continuosly and it actually interferes with the use of the telephone (e.g. if I'm using Siri and the message pops up, I have to start all over again and so on).
Strangely enough the message pops up even in airplane mode, with cellular data deactivated, with or without WiFi etc.
I called China Mobile and they told me to call Apple, I called Apple and they told me to call China Mobile.... Nobody seems being able to support.
I've been using iPhone 4 with the same SIM card until a few days ago and never experienced such a problem!
I must also say that the battery life of my brand new iPhone 4s is very short and I think it's because it keeps on trying 3G data connection (not available from China Mobile) that unfortunately cannot be deactivated anymore in iPhone 4s with iOS 5 (the option is still there with iPhone 4 with iOS 5). Network reception is also disappointing I presume for the same reason: if I could deactivate the 3G data (while keeping 2G data active) it would probably not happen.
I hope someone out there is able to help me.
Obviously I've been trying all sorts of resets (iPhone restart and reset, data connection reset etc.).
Thanks, ciao.
Stefano Bizzarri, Shanghai.

I haven't been back to China yet, but i did speak with Apple. Why Verizon couldn't have told me this is beyond comprehension. Apple said to Settings, then click on General, scroll down to and click on Reset then click on Reset Network Settings. Apple said that should do it at least in my instance. Unfortunately i haven't been out of the country to test it. I can't tell you how much this infuriates me about Verizon because i called them twice to check to see what to do and they told me no it should just automatically hook up to a new network. All i can say is Verizon Global Technical support was useless and they need to learn there product line.

My Address book doesn't work!

Dear Community, it's my first time I write here and I'm italian, so I don't speak English very well... I'm sorry if in this post there are some error...
The problem is simple:
My address book doesn't work. If I click on its icon on dock, it "jump" for 2 times and stop... a message inform that it doesn't work.
Anyway I can access to my contact with dashboard and Spotlight.
Please help me.
Thanks.

Log back in to your regular user account. Quit Address Book. Go you /Users/you/Library/Preferences and find these two files:
com.apple.AddressBook.abd.plist
com.apple.AddressBook.plist
Move them out to the Desktop. Does Address Book launch now?

Swipe doesn't work on my mobile.

Hi everyone,
My swipe on moblie doesn't work. I checked "enable swipe" and still doesn't work.
I don't know what's the right link for the phone but here's my link and just type it on your phone: EFS2 Soccer Clinic: Media
Maybe I missed something or whatever, Let me know!
Thanks
Debs

The new release of Muse didn't seem to fix the problem for me, so I don't think they are addressing it. I was only able to fix the problem by having a developer modify the code to fix the swipe function.Only thing I've seen is this comment from Adobe on July 7th.
"In the most recent major update of Chrome, Google fundamentally changed how Mobile Chrome supports swipe events. Those changes have broken swipe behaviors on Muse generated websites when viewed in Mobile Chrome. We're aware of the issue and working on changes to Muse code generation to address it as part of a future major update of Muse."
https://forums.adobe.com/message/6529993#6529993

International message to China mobile doesn't work

Similar Messages

Maybe you are looking for