Interner Softwarefehler: %0,Zeile Untermen-PGC
Hallo erst mal
ich bin neu hier und wende mich gleich mal mit einem Problem an euch.
Habe seit neuem Adobe Premiere CS3 mit Encore CS3.
Habe bisher mit Ulead PowerDVD meine DVD Projekte erstellt.
Da PowerDVD nicht mehr weiterentwickelt wird bin ich nun auf Encore umgestiegen.
Habe aber gleich mit meinem ersten Projekt kläglich versagt.Nachdem ich alle Assets im Projekt eingebaut und auch verknüpft hatte habe ich das Projekt von Encore überprüfen lassen.Encore hat auch kein Problem gefunden und ich wollte einen DVD Ordner erstellen.Das Programm transcodiert auch ziemlich lange, bricht dann aber nach
Projekt wird für Erstellung Vorbereitet
Video für Movie wird geplant
mit der Meldung
" Im PGC Untermenü ist ein Fehler aufgetreten
Interner Softwarefehler:%0,Zeile Untermenü-PGC Info:
Name = Untermenü,Ref = Dpgc, Zeit 00:03:12:03
ab.
Dies ist fast die Länge der Audiodatei die mit dem Untermenü verlinkt ist.
Wenn ich diese weglasse tritt der Fehler schon nach 00:00:14:23 auf
Bin total gestresst von dem Programm.
Da war Ulead einfach konfortabler (oder ich bin zu doof für'n teures Profiprogramm).
Wäre toll könnte mir jemand weiterhelfen.
Hallo
leider habe ich nicht wirklich eine antwort parat, ich kann nur bestätigen dass dieser fehler einfach in jedem projekt mindestens einmal auftritt.
da adobe leider für kundenanfragen auch noch geld kassiert, bin ich vollkommen enttäuscht von adobe. nicht zu erwähnen, dass ich das problem mit der cs2 auch schon hatte...
ein kleiner lösungsansatz, der manchmal funktioniert, manchmal wieder nicht:
datei neu rausrendern, wieder ins encore einfügen - evtl neues schnittfenster, vielleicht auch nicht. dann vielleicht neu transcodieren.
ich weiss, das ist keine lösung, denn das ist ungefähr ALLES was man versuchen kann, aber in -zig versuchen war einmal das eine, dann das andere richtig...
ach ja: und dann funktioniert noch, wenn der fehler nach dem erneuten transcodieren nochmal auftritt, das m2v "auf original zurücksetzen" und nochmal transcodieren!
ich glaube schlussendlich um deine selbstzweifel zu entkräften, dass man für adobe encore kein profi sein muss, sondern ein wissenschaftler mit viel geduld.
viel erfolg!
Similar Messages
-
Hallo!
I use PSE 7. Wen i tryed to burn my first film, i get following message:
interner Softwarefehler:.\Vobulator\BlockPlanner\BlockPlaner.ppc, Zeile 215
The message comes wen burning on DVD also wen burning into a folder.
I also turned off firewall, etc. Can anybody help me, what i can do here?
Thanks a lot!
AlexDo you have some other CD/DVD burning softwares installed on your machine?
-
Ich versucher unter Premiere Elements 10 mit Disc menü (1 Hauptmenü -2 Szenenmenüs zu in den Ordn
Ich versucher unter Premiere Elements 10 mit Disc menü (1 Hauptmenü -2 Szenenmenüs zu in den Ordner zu brennen. Beim Kodieren des Menüs 100% Beim kompilieren d. M. auf 25% kommt Immer die Fehlermeldung: Interner Softwarefehler: Vobulator\Block Planner\Block Planner\cpp.Zeile 215
Bemerkung: Beim Einschalten vin Automatisch Abspielen d. h. ohne Discmenü erfolgt die Codierung tadellos!You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum -
Internal Software error PGC for encore CS3 !!! solved !!!
Almost everybody here knows the next error:
PGC "timeline name" has an error at xx:xx:xx:xy internal software error : %0, line timeline name - PGCINFO: name= timeline name, ref=BPGC, time=xx:xx:xx:xy
Where the y in time stands for the length of the timeline minus 2 frames. The BPGC error can also be FPGC or DPGC dependant on how many menu's there are in the project.
It kept me awake for weeks and after reading this forum several times and comparing encore CS3 with encore 2.0 filenames I found the solution.
This Error is a bug in encore witch has nothing to do with blank filename spots and sonic coding or codecs or planning your workflow with a pencil but pure with the combination Adobe Premiere Pro CS3 and Encore CS3.
This is what generates the problem:
In Adobe Premiere Pro CS3 you build project with video, sound and chapters. Then you export the project via the Media Encoder not Multplexed.
Premiere CS3 then creates the following files:
filename.M2V (video file mpg)
filename.AC3 (audio file ac3)
filename.M2V.XMPSES (an adobe file with preview info and chapter pointers)
filname.XMP (??)
It is the .M2V.XMPSES file witch creates the PGC error. If you use the MULTIPLEX DVD option then ADOBE will not create the .M2V.XMPSES file so there will not be an error. This trick mentioned by ADOBE and many others is just to go around the bug instead of solving it. Also with multiplex you have just one sound track. I use two sound tracks like 5.1 and a 2.0 track witch you can choose in a menu.
Some people say it is the blank spots. Also not true. They have probably just erased the blank spots of the M2V file and forgot the .M2V.XMPSES file.
When you just delete the .M2V.XMPSES file and then open the M2V and AC3 file in Encore as a new asset, make a timeline and menu's and the project will built and burn. Only if you delete this .M2V.XMPSES file Encore takes a longer time to import the M2V file and will be without the chapter points.
Almost everything else will work like menu with sound and even a movie background (use M2V files). Only the motion buttons in a menu still wont work unless you use a black background !?!. Haven't figured this out yet. Only solution for this is use Encore 2.0. In this older version also the motion buttons will work without error's (everything else also so why buy CS3??)
Here is what you must do create a DVD without errors:
-Create a project in Premiere Pro, even with chapters.
-Write down all chapter points (minutes:seconds:frames)
-Create two new unique maps in explorer for example D:DVD1 and D:DVD2
-Export in Premiere with Media Encoder without the Multiplex:DVD but with NON to the D:DVD1 map
-Copy from D:DVD1 only the M2V and AC3 files to D:DVD2
-Start up Encore DVD CS3 or 2.0
-Create a new unique project in Encore for example "DVD" and save this in the map D:DVD2\
-Then use Save-as (under file) and pinpoint to D:DVD2\dvd to be sure that all Encore's files are placed in this folder.
-Select M2V file and make new timeline.
-Make chapter points (you wrote down the points, did you?)
-Create menu's, even with sound (AC3) and movie background (M2V)
-Then render project if you have used a video for menu background
-Finally Built and burnnnnnn!!
-If you like to use motion buttons in a menu then use Encore 2.0
I have double checked my work flow and it really works. I have built a project and burned with success Then I deleted the timeline and the M2V file. Copied the .M2V.XMPSES file in the used folder. Re loaded the M2V file in encore (this time much faster! and with chapter points). Tried to built and burn and back was the error. Also this happened in in Encore 2.0!!
Hope that this will solve the PGC error once and for all !!!
Marcel W
system:
acer aspire AMD 64 3800+
2 GB
250 GB hard drive for system
750 GB hard drive for movie
software Adobe Encore 3.0.1.008, Premiere PRO 3.2.0, Photoshop CS3 10.0, All upgraded
NERO 7
No Internet> Where the y in time stands for the length of the timeline minus 2 frames.
This can actually vary, and so far at least, I don't think we've seen a pattern as to type of pgc error based on how many frames from the end it reports.
> The BPGC error can also be FPGC or DPGC dependant on how many menu's there are in the project.
Number of menus is not relevant; the iteration of the first letter is more related to subsequent occurrences of the error. In my current tests it did not always update; they may have been too similar.
> This is what generates the problem...
Well, the problem does not occur every time you do what you describe, any more than it occurs every time spaces are left in the file names. What you have is, as some other suggestions, a workaround. Thats not bad, and I wonder if you are onto something as to what is contributing to the problem.
So, on to the interesting part whether the xmpses file, or at least what Encore is doing with it, is contributing something. I took an old test project that throws the PGC error and did some experiments.
Background. I am a user who does get the pgc errors regularly, but not always. Creative Suite Production Premium, with PPro CS3 3.2.0 (374) and Encore 3.0.1.008. Pentium 4 2.8GHz 2G RAM, XP SP3, Multiple drives, Nvidia GEforce4 MX440 i.e. an older system. I have lots of stuff loaded and running, including virus protection and firewall, so there are any number of potential conflicts. But I get no crashes, and only one problem other than the pgc. (PPro and Encore monitor windows do this diagonal thing I suspect the display card, but the drivers are up to date. Maxing and then back to fit fixes it.)
If you want to attempt to replicate my studies, here is a link to my problem clip and the first Encore project I describe.
http://www.videoandcomputer.com/test/pgc_test.htm
This project involves a very short AVI export from PPro CS3 - just over 8 seconds - called pgcbad_clip1.avi. Just to answer any question, the source is dv camera capture, and the source and avi export I use are dv avi type 2. There were no effects added on the timeline.
Test 1: Create a project in Encore CS3. Use the sunset menu and delete all the buttons except "play all." Import the avi as a timeline. Set the timeline end action as "return to last menu" and set the button link to the timeline. Auto transcode. (Project settings are 8mbps max and a3c.) Check project shows okay; there is never a problem with that. Build to a DVD folder in a new folder. This project throws the pgc error.
Test 2: Now create a new Encore project in a new folder. Use the same process, except import as timeline the m2v and a3c files from the first run. (I.e. if the clip is pgcbad_clip1.avi, in the test1 project folders, there is a folder called pgcbad_clip1.avi that has 6 files.) Note that in the folder they are imported from is an xmpses file from the first project's encore transcode. The build again fails with the pgc error - same frame, etc, but I really think the frame number doesn't matter.
Test 3: Now create another new Encore project in a new folder. Use same process, but before importing the m2v and a3c as timeline, delete the xmpses file. Drumroll...... Build succeeds!
Go figure.
This is not the repeatable bug option weve been looking for, but based on a clip that always fails, it does demonstrate the odd event of deleting the xmpses file as a workaround. I wonder if that will give adobe something to work with.
Can anyone else get my clip to work/not work in a straight project?
Test 4: Just to answer the question since the avi file fails here, will the elemental option succeed? I exported elemental m2v and wav from PPro, used the same project process, and transcoded the wav. That build also works! I have seen this work both ways. I have had projects where the elemental failed, and an avi export worked. I do believe the elemental options work more consistently. But my project that I completed yesterday used all avi exports, animated buttons in the submenu, - no pgc error. -
PGC Internal Software Error During DVD Build
After weeks of editing my 77-minute feature and days of DVD authoring effort, it's more than a bummer to see this appear during the final DVD build process:
PGC "Analysis" has an error at 47:21:29 internal software error %0 line . . . PGC Info; name=Analysis, ref FPGE time 47:21:29.
I verified the project before the build and there were no errors/warnings. I tried several times and get the same error at the same spot; I tried creating an image and the same error takes place at the same spot. I previewed the entire thing in Encore and everything plays/sounds great. All the footage/sound was imported as two large, uncompressed DVI files exported from PPro 2.0. The video is 16:9, 24p. Most of the sound came straight from the source video feed, except for two WAV files containing theme music.
What can I do to get this production finished-- of course, I am behind schedule...So, finally I've found the source of the problem and a workaround!
First the source:
when Encore has to transcode a video it must corrupt the file, because it's the transcoded file that causes the problem, I tried this by importing a transcoded file into Encore 1.5 there it came with the same error.
Now the workaround, ok maybe it isn't quite a workaround but it's a way to go:
What I did was: I built my project new in Encore 1.5, because Encore 2.0 has a problem importing the videos by me, but if you would just import the videos in 1.5 and let 1.5 transcode them so that all of them would fit on a DVD you should be able to import the transcoded files in CS3 and it should work, no guarantee.
Other possibility: try opening your project in encore 2.0 and re import your videos there and let 2.0 do all of the transcoding, that might work too!
But for certain: don't let encore CS3 do all the transcoding!
I'm working with PAL files I don't know if it will be the same by NTSC, but it's worth a try!
If anybody feels like reproducing the bug, here is the way to do it:
Make a project in Encore CS3 and import Videos encoded by premiere as MPG2-DVD (I think: .m2v .wav) and set the transcoding options to automatic, encore should have to transcode the files. Then let encore make the DVD, at some point you should get that nice PGC error! -
Importing Uncompressed AVI Caused PGC Internal Software Error During Burn
When I export from PPro using uncompressed AVI and import that into Encore, the DVD burn blows up with a PGC internal software error. Somebody told me to export from PPro using DV-AVI instead of uncompressed, and that should fix things. Since that's going to take a day or so (this is a big/77 minute project) to export/import/transcode, I'd like to know why Encore doesn't like uncompressed AVI, and what's the difference between uncompressed AVI and DV-AVI? The DVD project passes validation without error, imports the assets without a problem, and the preview works fine for the entire show. Yet the build/burn fails!
Trenton,
Rather than uncompressed, you could try a lossless codec like
Lagarith
or
version 2.1.1 of HuffYUV
. Try Lagarith first if you want to experiment; HuffYUV can sometimes throw Encore for a loop if the clip length is longer than about 10 - 12 minutes.
That said, I have to agree with Harm - the MainConcept DV codec used in Premiere Pro is so good that a single generation loss from recompression for DV source footage (and that only for altered frames) is trivial and will not be noticed by your audience. It probably won't even be noticed by you unless you spend hours comparing individual frames. And who has time to do that? :)
-Jeff -
Which internal table is storing MSEG-ZEILE field in bapi BAPI_GOODSMVT_CREA
Dear Sap Gurus,
I am facing one problem . i am using standard bapi for migo transaction i.e. BAPI_GOODSMVT_CREATE . it is working fine. Now i want to modify this bapi for some of our own developed fileds that is stored in another table say ZMSEG . i have found all fields in bapi of table mseg and put those fileds in our developed table zmseg but i am unable to find one field MSEG- ZEILE . Plz guide me from which internal table this filed MSEG-ZEILE is coming . The appropriate answers will be highly appreciated.
Thanks & Regards,
Amit RanjanHi
U can't find out the field ZEILE in BAPI field, just as somebody said you before, that field will be automatically calculated before saving the document.
So u can calculate it by yourself for your table ZMSEG
Anyway it doesn't make sense to change the BAPI in order to store the data in own z-table, there is an exit to do it:
EXIT_SAPLMBMB_001
Why don't you use it?
Max -
PGC error when burning in Encore CS3 ... help
I've looked and can not find any one else with exactly this problem. I recently upgraded to Adobe Creative Suite 3 and can not get a DVD to burn. The project checks fine, the files transcode without difficulty but during the burning process, I very quickly get a PGC "file name" error.
I have a Sony Pentium 4, 2 GHz, with 1.21 G of RAM, and plenty (30 G) free on my hard drive. I have a 16X Memorex DVD burner which is probably 6 months old, but up until now has worked great. I've tried several different brands of DVD-R media and same problem.
I'd describe myself as an advanced amateur at video making. I taught myself on Nova's Video Explosion and burned 100's of dvd's on the Sonic's My DVD program over the past 5 years. Actually that system worked well, but I'd outgrown it. I downloaded Encore 2.0 free 30 day trial and loved it. I'd import (uncompressed) avi files that I'd created in other programs (mostly Video Explosion, but also Movie Shaker, and Windows Movie Maker), create menus in PS CS2 and my DVD's burned quickly and without errors at all. When my 30 days expired, I found they no longer offered 2.0 and I decided to spend the big bucks at got Creative Suite 3 really solely for Encore.
I've now spent 3 days trying all kinds of different things, many different files from different sources and I always get the same error message of "PGC "file name" has an error at "time" internal software error %0, line "file name:, time 00:"time", ref= BPGC.
I did read some messages on here about uncompressed avi vs. compressed avi. I did find that I was using uncompressed avi, but when I used Adobe premiere and rendered as MPEG 2 ( I believe), I got the same error. The only success (?) I had was when I rendered a file as a .MOV. It did burn without the dreaded error message, but the quality was extremely poor and jumpy.
Any ideas? I've got a project due in a couple of days and at present I've got files that I can't get to DVD...So, finally I've found the source of the problem and a workaround!
First the source:
when Encore has to transcode a video it must corrupt the file, because it's the transcoded file that causes the problem, I tried this by importing a transcoded file into Encore 1.5 there it came with the same error.
Now the workaround, ok maybe it isn't quite a workaround but it's a way to go:
What I did was: I built my project new in Encore 1.5, because Encore 2.0 has a problem importing the videos by me, but if you would just import the videos in 1.5 and let 1.5 transcode them so that all of them would fit on a DVD you should be able to import the transcoded files in CS3 and it should work, no guarantee.
Other possibility: try opening your project in encore 2.0 and re import your videos there and let 2.0 do all of the transcoding, that might work too!
But for certain: don't let encore CS3 do all the transcoding!
I'm working with PAL files I don't know if it will be the same by NTSC, but it's worth a try!
If anybody feels like reproducing the bug, here is the way to do it:
Make a project in Encore CS3 and import Videos encoded by premiere as MPG2-DVD (I think: .m2v .wav) and set the transcoding options to automatic, encore should have to transcode the files. Then let encore make the DVD, at some point you should get that nice PGC error! -
Error on extend an internal table, but the required space was not available
Hi All,
I am trying to retrieve cost data from COVP tables, as well as the quantity, cost centre, and price unit fields from MSEG / BSEG tables. Thing is, if the AWTYP value in COVP table = 'MKPF', i have to get the data from MSEG, otherwise, I need to get it from BSEG table.
I kept getting this error message:
<i>You attempted to extend an internal table, but the required space was not available.</i>
Anyone have any idea how to make my codes more efficient?
Please help. Thanks!
Regards,
Cecilia
REPORT ZMISCY004.
TABLES : COVP, BSIS, BSEG, MSEG, MAKT, CSKU.
PARAMETERS :
P_FILE(300) DEFAULT '\sapdcdatasaprptoh.txt' LOWER CASE.
DATA MSG_TEXT(50).
DATA :
XKOKRS LIKE COVP-KOKRS,
XBELNR LIKE COVP-BELNR,
XBUZEI LIKE COVP-BUZEI,
XGJAHR LIKE COVP-GJAHR,
XPERIO LIKE COVP-PERIO,
XWKGBTR LIKE COVP-WKGBTR,
XWTGBTR LIKE COVP-WTGBTR,
XREFBN LIKE COVP-REFBN,
XREFBZ LIKE COVP-REFBZ,
XKSTAR LIKE COVP-KSTAR,
XBEKNZ LIKE COVP-BEKNZ,
XMATNR LIKE COVP-MATNR,
XBUKRS LIKE COVP-BUKRS,
XREFGJ LIKE COVP-REFGJ,
XREFBK LIKE COVP-REFBK,
XLTEXT LIKE CSKU-LTEXT,
XMAKTX LIKE MAKT-MAKTX,
XAWTYP LIKE COVP-AWTYP,
XTWAER LIKE COVP-TWAER,
XSGTXT LIKE COVP-SGTXT,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : BEGIN OF ITAB_COVP OCCURS 10,
KOKRS LIKE COVP-KOKRS,
BELNR LIKE COVP-BELNR,
BUZEI LIKE COVP-BUZEI,
GJAHR LIKE COVP-GJAHR,
PERIO LIKE COVP-PERIO,
WKGBTR(15) TYPE C,
WTGBTR(15) TYPE C,
REFBN LIKE COVP-REFBN,
REFBZ(3) TYPE C,
KSTAR LIKE COVP-KSTAR,
BEKNZ LIKE COVP-BEKNZ,
MATNR LIKE COVP-MATNR,
BUKRS LIKE COVP-BUKRS,
REFGJ LIKE COVP-REFGJ,
REFBK LIKE COVP-REFBK,
LTEXT LIKE CSKU-LTEXT,
MAKTX LIKE MAKT-MAKTX,
AWTYP LIKE COVP-AWTYP,
TWAER LIKE COVP-TWAER,
SGTXT LIKE COVP-SGTXT,
BSIS_WRBTR(13) TYPE C,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : END OF ITAB_COVP.
SELECT M1~KOKRS
M1~BELNR
M1~BUZEI
M1~GJAHR
M1~PERIO
M1~WKGBTR
M1~WTGBTR
M1~REFBN
M1~REFBZ
M1~KSTAR
M1~BEKNZ
M1~MATNR
M1~BUKRS
M1~REFGJ
M1~REFBK
M1~AWTYP
M1~TWAER
M1~SGTXT
M4~KOSTL
M4~MENGE
M4~MEINS
INTO (XKOKRS,
XBELNR,
XBUZEI,
XGJAHR,
XPERIO,
XWKGBTR,
XWTGBTR,
XREFBN,
XREFBZ,
XKSTAR,
XBEKNZ,
XMATNR,
XBUKRS,
XREFGJ,
XREFBK,
XAWTYP,
XTWAER,
XSGTXT,
MSEG_KOSTL,
MSEG_MENGE,
MSEG_MEINS
FROM COVP AS M1
LEFT OUTER JOIN MSEG AS M4
ON M1~REFBN = M4~MBLNR AND M1~REFBZ = M4~ZEILE AND M1~REFGJ = M4~MJAHR
WHERE M1~SCOPE = 'OCOST' AND M1~AWTYP = 'BKPF'
OR M1~SCOPE = 'OCOST' AND M1~AWTYP = 'MKPF'
OR M1~KSTAR = '972022'.
IF XAWTYP = 'BKPF'.
SELECT KOSTL MENGE MEINS INTO (BSEG_KOSTL, BSEG_MENGE, BSEG_MEINS) FROM
BSEG WHERE BELNR = XREFBN AND BUZEI = XREFBZ AND GJAHR = XREFGJ AND
BUKRS = XREFBK.
ENDSELECT.
MOVE BSEG-KOSTL TO BSEG_KOSTL.
MOVE BSEG-MEINS TO BSEG_MEINS.
MOVE BSEG-MENGE TO BSEG_MENGE.
ELSE.
MOVE ' ' TO BSEG_KOSTL.
MOVE ' ' TO BSEG_MEINS.
MOVE ' ' TO BSEG_MENGE.
ENDIF.
*GET LTEST
SELECT LTEXT INTO XLTEXT
FROM CSKU
WHERE KTOPL = 'COAA' AND SPRAS = 'EN'.
*GET MAKTX
IF XMATNR <> ' '.
SELECT SINGLE * FROM MAKT WHERE MATNR = XMATNR.
MOVE MAKT-MAKTX TO XMAKTX.
ELSE.
MOVE ' ' TO XMAKTX.
ENDIF.
MOVE : XKOKRS TO ITAB_COVP-KOKRS,
XBELNR TO ITAB_COVP-BELNR,
XBUZEI TO ITAB_COVP-BUZEI,
XGJAHR TO ITAB_COVP-GJAHR,
XPERIO TO ITAB_COVP-PERIO,
XWKGBTR TO ITAB_COVP-WKGBTR,
XWTGBTR TO ITAB_COVP-WTGBTR,
XREFBN TO ITAB_COVP-REFBN,
XREFBZ TO ITAB_COVP-REFBZ,
XKSTAR TO ITAB_COVP-KSTAR,
XBEKNZ TO ITAB_COVP-BEKNZ,
XMATNR TO ITAB_COVP-MATNR,
XBUKRS TO ITAB_COVP-BUKRS,
XREFGJ TO ITAB_COVP-REFGJ,
XREFBK TO ITAB_COVP-REFBK,
XLTEXT TO ITAB_COVP-LTEXT,
XMAKTX TO ITAB_COVP-MAKTX,
XAWTYP TO ITAB_COVP-AWTYP,
XTWAER TO ITAB_COVP-TWAER,
XSGTXT TO ITAB_COVP-SGTXT,
BSEG_KOSTL TO ITAB_COVP-BSEG_KOSTL,
BSEG_MEINS TO ITAB_COVP-BSEG_MEINS,
BSEG_MENGE TO ITAB_COVP-BSEG_MENGE,
MSEG_KOSTL TO ITAB_COVP-MSEG_KOSTL,
MSEG_MENGE TO ITAB_COVP-MSEG_MENGE,
MSEG_MEINS TO ITAB_COVP-MSEG_MEINS.
APPEND ITAB_COVP.
CLEAR ITAB_COVP.
ENDSELECT.
ENDSELECT.
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC NE 0.
WRITE: 'File cannot be opened. Reason:', MSG_TEXT.
EXIT.
ENDIF.
LOOP AT ITAB_COVP.
TRANSFER ITAB_COVP TO P_FILE.
ENDLOOP.
CLOSE DATASET P_FILE.Cecilia - I think your problemn is a nested select:
*GET LTEST
SELECT ltext INTO xltext
FROM csku
WHERE ktopl = 'COAA' AND spras = 'EN'.
*GET MAKTX
IF xmatnr <> ' '.
SELECT SINGLE * FROM makt WHERE matnr = xmatnr.
MOVE makt-maktx TO xmaktx.
ELSE.
MOVE ' ' TO xmaktx.
ENDIF.
MOVE : xkokrs TO itab_covp-kokrs,
etc.
mseg_meins TO itab_covp-mseg_meins.
APPEND itab_covp.
CLEAR itab_covp.
ENDSELECT.
Do you need to do the inner select for every cost element text?
Rob -
Append a record to internal table
hello:
when i execute the code below,there is a runtime error." In die sortierte interne Tabelle (Typ SORTED_TABLE)
"PROGRAM=ZJOIN_INTER_TABLEDATA=T_ITAB1" sollte an
Position 1 eine Zeile eingefügt bzw. geändert werden.
Dadurch wurde die für die Tabelle durch ihren Schlüssel festgelegte
Sortierreihenfolge zerstört."
how can i resolve it?which one can tell me?Thanks very much
REPORT ZJOIN_INTER_TABLE.
DATA:BEGIN OF WA_ITAB,
COL1 TYPE I,
COL2(10) TYPE C,
END OF WA_ITAB.
DATA:T_ITAB1 LIKE SORTED TABLE OF WA_ITAB WITH NON-UNIQUE KEY COL1.
WA_ITAB-COL1 = 10.
WA_ITAB-COL2 = 'col2'.
APPEND WA_ITAB TO T_ITAB1.
WA_ITAB-COL1 = 9.
WA_ITAB-COL2 = 'col2'.
APPEND WA_ITAB TO T_ITAB1.hi
kindly go thro the lines.
syntax:
DATA itab {TYPE tabkind OF linetype|LIKE tabkind OF lineobj}
WITH [UNIQUE|NON-UNIQUE] keydef
[INITIAL SIZE n] [WITH HEADER LINE].
The system creates an internal table with table type tabkind. Since there is no generic field definition, you cannot use the table types ANY TABLE or SORTED TABLE.
The construction of the table lines is defined by linetype (if you are using a TYPE reference) or by the type of the referred object lineobj (if you are using a LIKE reference). If you specify the line type, you can also use REF TO to refer to a reference type.
The same rules apply to UNIQUE and NON-UNIQUE as apply to the TYPES definition. You may only omit this specification with standard tables.
If you do not specify an INITIAL SIZE, the system assumes a default value of INITIAL SIZE 0.
i think now u r clear... now yr code will work.
DATA:BEGIN OF WA_ITAB,
COL1 TYPE I,
COL2(10) TYPE C,
END OF WA_ITAB.
DATA:T_ITAB1 like TABLE OF WA_ITAB WITH NON-UNIQUE KEY COL1.
WA_ITAB-COL1 = 10.
WA_ITAB-COL2 = 'col2'.
APPEND WA_ITAB TO T_ITAB1.
WA_ITAB-COL1 = 9.
WA_ITAB-COL2 = 'col2'.
APPEND WA_ITAB TO T_ITAB1. -
Mapping data from internal table to SAPSCRIPT Box.
Hi Gurus,
I have to create a sapscript where in I should get data from standard tables and display the data in box (table format) in sapscript. I know how to get a field (perform in zprogram) into sapscript form zprogram. I dont know how I can get data (internal table) from my zprogram into sapscript and display in a box.
Your help is highly appreciated.Hi David,
consider the below example say if your zprogram having the internal table table loop and you want to print the contents line by line or in a box,
LOOP AT tj_1irg23d.
header line
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_HEADER1'
EXCEPTIONS
OTHERS = 1.
endloop.
then in your sap script main window or where ever you want to print just straight away give your internal table fileds as follows(just for example)
I2 ,,&J_1IRG23D-ZEILE(Z)&,,&J_1IRG23D-MATNR&,,&J_1IRG23D-CHAPID&,,
= &J_1IRG23D-MENGE(Z)&,,&J_1IRG23D-MEINS&,,0.0,,
then it will bring the values of your internal table in the form. -
Hierarchial list output to internal table
Hi Folks,
REPORT ZMB51 .
DATA LIST_TAB TYPE TABLE OF ABAPLIST.
<b>DATA: BEGIN OF olist OCCURS 0,
filler1(1500) TYPE c,
END OF olist.</b>
submit RM07DOCS EXPORTING LIST TO MEMORY
AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
LISTOBJECT = LIST_TAB
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
LIST_INDEX = -1
TABLES
<b>LISTASCI = oLIST</b>
LISTOBJECT = LIST_TAB
EXCEPTIONS
EMPTY_LIST = 1
LIST_INDEX_INVALID = 2
OTHERS = 3.
BREAK-POINT.
write:/ sy-subrc.
ENDIF.
The above program is getting the MB51 output into an internal table.So far it is fine but this internal table can't be used for further processing.I want to get the MB51 output into an internal table which can be used for further processing.
data:begin of itab1 occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
werks like vbrp-werks,
sloc like zmmstoragebin-storage,
bwart like mseg-bwart,
mblnr like mseg-mblnr,
zeile like mseg-zeile,
budat like bkpf-budat,
menge like mseg-menge,
meins like mara-meins,
end of itab1.
If I delcare an internal table as above and given itab1 instead of olist it is going for dump.How to achieve this?
Thanks,
K.Kiran.Hi Kiran,
You will be getting all the fields in the concatenation form into the string of oLIST.
Is there any delimitor like space or Tab between the fields or not?
so try to use Split the oLIST-filler1 into different fields at the delimiter
or you have to offet oLIST-filler1 to different fields
like example
itab1-matnr = oLIST-filler1+0(18)
itab1-werks = oLIST-filler1+19(4) like that
based on the fields data in oLIST-filler1 you have to do it
Regards
Anji -
PPro6 to Encore "internal software" error
I encoded in PPro6 and then imported an mpeg2 project as a timeline from PPro6 into Encore. When I try to burn a DVD, I get an error message: PGC "" has an error at 00;00;00;00. Internal software error: 50, line "" Info: name = "", ref= Bpgc, time = 00;00;00;00;00.
The project was fully rendered in PPro. I've re-exported 3 times, and it happens every time.
I did a search on the Forum, and found one other person who had this problem, but their problem turned out to be with their audio. My project has no audio at all. Just video.
Thank you for any help/ideas/suggestions you may have! I'm totally flummoxed.Stan Jones wrote:
The .xmpses file is an xml (type) file.
Rename the file .xmpses.old and the .xmp renamed as .xmp.old (I don't recall for sure whether there was ever any benefit to renaming the .xmp file. We want to maximize the chances that it works, so rename both.)
Can I just say Stan I am so so grateful for this post. So easy to do and solved my problem!!! I was beyond fed up with the whole thing. After having such problems with Dynamic Link causing slight flickering in my videos I have tried to go back to Exporting with my own settings for Encore in CS6 but found it caused so many more problems than it ever did in previous versions of the programmes. I tried exporting the sequences in so many different ways, different bit rates, including Encore chaptering before Encore and even nesting. Had so many different errors like 52102, line 332 and this PGC error was the final one and my biggest problem. Cannot believe how simple it was. I normally chapter within Encore anyway so changing a little file name of the other 2 connected files of my sequence really was no bother at all.
I honestly think this is the answer to many of the problems that I have had in Encore as the errors although in different forms, more often than not, seem to be chapter related.
it is now 1.45am and because of you I can now go to bed to get up and film another event in the morning. CHEERS! (don't worry I'm a girl lol) -
I get the following error message after Encore 2.0 prepares the slideshows and goes to the next step. All of the video material is prepared and, the progress window is in the middle of "Planning Audio for movie". Any suggestions for a fix?
Adobe Encore DVD
PGC "Yosemite Valley" has an error at 00;00;20;04.
internal software error: %0, line Yosemite Valley - PGC Info: name = Yosemite Valley, ref = Ipgc, time = 00:00:20:04
OK
Thanks.So, finally I've found the source of the problem and a workaround!
First the source:
when Encore has to transcode a video it must corrupt the file, because it's the transcoded file that causes the problem, I tried this by importing a transcoded file into Encore 1.5 there it came with the same error.
Now the workaround, ok maybe it isn't quite a workaround but it's a way to go:
What I did was: I built my project new in Encore 1.5, because Encore 2.0 has a problem importing the videos by me, but if you would just import the videos in 1.5 and let 1.5 transcode them so that all of them would fit on a DVD you should be able to import the transcoded files in CS3 and it should work, no guarantee.
Other possibility: try opening your project in encore 2.0 and re import your videos there and let 2.0 do all of the transcoding, that might work too!
But for certain: don't let encore CS3 do all the transcoding!
I'm working with PAL files I don't know if it will be the same by NTSC, but it's worth a try!
If anybody feels like reproducing the bug, here is the way to do it:
Make a project in Encore CS3 and import Videos encoded by premiere as MPG2-DVD (I think: .m2v .wav) and set the transcoding options to automatic, encore should have to transcode the files. Then let encore make the DVD, at some point you should get that nice PGC error! -
Hello,
in my program i can't fill and send contents of my internal table. my code looks like this:
TABLES:
MKPF,
MSEG.
TYPES: BEGIN OF ST_2,
F_1 LIKE MKPF-MANDT, " For MKPF~MANDT,
F_2 LIKE MKPF-MBLNR, " For MKPF~MBLNR,
etc
F_18 LIKE MSEG-ZEILE, " For MSEG~ZEILE,
F_19 LIKE MSEG-LINE_ID, " For MSEG~LINE_ID,
etc
END OF ST_2.
DATA: it_1 TYPE TABLE OF ST_2,
wa_it LIKE LINE OF it_1.
FORM get_data.
SELECT
MKPF~MANDT
MKPF~MBLNR
*etc
MSEG~ZEILE
MSEG~LINE_ID
*etc
INTO wa_it
FROM
MKPF AS MKPF
INNER JOIN
MSEG AS MSEG
ON MKPFMANDT = MSEGMANDT AND
MKPFMBLNR = MSEGMBLNR AND
MKPFMJAHR = MSEGMJAHR
WHERE
MKPF~CPUDT >= '20060301' AND
MSEG~BUKRS = 'M' AND
MSEG~BWART IN ('601', '602').
ENDSELECT.
so, where should i put:
INSERT wa_it INTO TABLE it_1.
CLEAR wa_it.
to append my internal table with data?
please help me!!!!Hi,
i`ve made the necessary changes to your code :
SELECT MKPFMANDT MKPFMBLNR MSEGZEILE MSEGLINE_ID
INTO wa_it FROM MKPF AS MKPF INNER JOIN MSEG AS MSEG
ON MKPFMANDT = MSEGMANDT AND
MKPFMBLNR = MSEGMBLNR AND
MKPFMJAHR = MSEGMJAHR
WHERE
MKPF~CPUDT >= '20060301' AND
MSEG~BUKRS = 'M' AND
MSEG~BWART IN ('601', '602').
<b>
append wa_it to it_it.
clear wa_it.
</b>
ENDSELECT.
reward points if helpful.
Regards
Maybe you are looking for
-
I tried to upgrade to Firefox 17.1 in Dec. 2012. When I did so, Ask.com took over the toolbar, search field, bookmarks, etc. I managed to get rid of it for a little while, but now it is back & since Firefox no longer recognizes my profile I cannot un
-
Just did a restore for a new 4S. I want to do a new iCloud account and discard the one that came with the restore. Any suggestions?
-
about a week ago i was using the itunes store fine. now i cant get into the itunes store. i get a message that says "itunes could not connect to the itunes store. unknown error occurred (400). make sure your network connection is active, try again."
-
Remove Blank Page conditionally in Smartforms
Hi Experts this is Arun, I have Requirement in such a way that, Form should contain three different pages which display three different records using three different internal tables.My problem is I have to avoid second and third page if it does not
-
Hi guys, I am running into a poblem using WSAD, the request or response window in TCP/IP Monitor randomly disappeared, I had to close and reopen the WSAD to solve this problem, anyone has any idea how to fix this? Thanks a lot! Jin