Internet Access Control

Hi.
Is it possible to keep track of the quantity of internet content received(in bytes) on a client machine?
How does the proxy server allow or disallow internet access to a subset of clients (or one client) in the LAN to which it is connected.
Thanks

miraglia wrote:
I am using Network Magic version 5.5.9195.0-Pure0, platform version 11.2.9195.1 on a couple of Windows 7 laptops and I am finding when I set the Internet Access Control to "Prevent" that some websites like the www.yahoo.com and www.google.com can be still be accessed. I thought "Prevent" was supposed to completely turn off internet access? I also have BitDefender installed on these laptops for anti-virus and firewall and it includes parental controls, also, which I currently have set to always on for internet. Is BitDefender conflicting with Network Magic? Is there a way to get them to work together? I want to be able to turn off the internet so my kids can't get on whenever they want to. Thanks.
This won’t work anymore since HND is obsolete and I believed it is not actively maintained anymore. http://homecommunity.cisco.com/t5/Home-Network-Defender/Is-Home-Network-Defender-still-supported/td-...

Similar Messages

WRT 120 Internet Access Control Problem for itouch

I've just set up my router. Cannot seem to control access to the internet for my son's itouch. The router recognizes it on the map as a wireless device part of the network, but it will not show up in the menu that allows for internet access control. My lap top shows up, but no itouch. I'm running Windows XP home premium edition - not sure if this makes a difference.

Open the linksys setup page...Under the Wireless tab,Change the Channel Width to 20MHz only,Channel to 11 and click on save settings...Under the Advanced Wireless Settings,Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings...
On the I-Touch..Go to Settings>>>General>>>Reset>>>Now select Reset Network Settings.This will now reboot and restore you network connections.

My kids have figured a workaround for the internet access control

I was quite happy with Network Magic until my kids rendered it fairly ineffective by a simple workaround. The internet access control seems to be tied into each PC's clock. So, my kids simply change the time on the computer and ... Voila! Internet access whenever the parents aren't around. I was kind of hoping the internet access schedule would be linked to the time on the router. I'm hoping this can be fixed.
Message Edited by molsoncdn on 12-13-2009 06:58 PM

Hi, set your kids user accounts to not be admins, and set the BIOS password, this will migate that workaround.
My Cisco Network Magic Configuration:
Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

Control Internet access using machines names

Hello to all, I have some machines (> 100) that are DHCP client and are on different subnets. I need that users that work on these machines don't access Internet. Is a there a way on TMG 2010 to create any
kind of control to accomplish this need?
Regards, EEOC.

Hi,
You can only control the traffic with IP addresses not computer names. A other way to limit internet access is to use users and groups in TMG firewall policy rules. The clients must be Webproxy or TMG clients
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Software for controlling internet access with Airport Exreme

I'd like to find software that let's me control what pc's in the house have internet access at certain times. My iMac is my main computer, and I use Airport Extreme as my router.

You probably need to set the card up in OSX. Verizon should have a modem script that needs to be installed. (Hard Drive>Library>Modem Scripts). Then you need to set up the card from Network Preferences. Then it should work on both platforms.

WRT1900AC does not block internet access in Parental Control

Hi,My router does not block internet access on my other PC. I tryed "Always" tryed specific addresses, tryed IP addresses and everything tech support suggested. I even replaced the router at their advise. Nothing helped. I realize that the problem is not the router but probably my home network configuration, but I can't figure out what is it. To my defence, so couldn't they Does anybody have or had such a problem?Thank you

What Firmware version is currently loaded?Can you post screen shots of how you have the controls configured?Does the User Manual give any configuration help? Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have? Router and Wired Configurations
Setup DHCP reserved IP addresses for all devices ON the router. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.

I turned off Internet access, using airport timed access control. Now, I can't turn it back on. The base station can't be found. Please help.

I turned off Internet access, using airport timed access control. Now, I can't turn it back on. The base station can't be found. Please help.

Can you take a look at this one and offer your opinion please?
https://discussions.apple.com/message/21889032#21889032

No internet access on certain IP Address

Hiya , I have to revisit this problem.
Strange IP issue !!!
I have a windows 2003 server with a static IP.
My network has a DHCP server and that Particular IP is in the exclusion range.
When I open a browser on the server I get the error "internet explorer cannot display the webpage"
However if I change the static IP address to a defferent static Ip address everything works fine.
Here's the funny bit.
If I set a different PC/server to this troublesome static IP I also get the issue.
So the problem is with the Static IP address itself?
On the DHCP server there is no indication that this is a BAD IP ADDRESS etc..
Checkeded the firewall and this is not blocking either.
Any ideas why this particular IP fails to get me internet access ?
When uing this BAD IP I can access our internal intranet.. Which makes me think it's some form of DNS issue?
Any PC that I change to this Bad IP cannot access the web.
I have also checked to see if Antivirus has somehow blocked this but it hasn't.
I can't really see anywhere on the network that can control this behaviour ?
Ray..

Hiya and thx for reply..
All static settings are correct.I set them using GUI
When set static, If I change to any other static IP every thing works. Until I use 10.1.3.150
Details below.
IP with no internet access (IP Issue)
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 00-14-5E-BD-C2-0C
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 10.1.3.150
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.1.2.254
   DNS Servers . . . . . . . . . . . : 10.1.3.145
                                       10.1.3.146
IP with internet access working (Normal IP)
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : 00-14-5E-BD-C2-0C
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 10.1.3.167
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.1.2.254
   DNS Servers . . . . . . . . . . . : 10.1.3.145
                                       10.1.3.146
DNS Server
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
   Physical Address. . . . . . . . . : 00-14-5E-BD-CB-20
   DHCP Enabled. . . . . . . . . . . : No
   IP Address. . . . . . . . . . . . : 10.1.3.145
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Default Gateway . . . . . . . . . : 10.1.2.254
   DNS Servers . . . . . . . . . . . : 10.1.3.145
   Primary WINS Server . . . . . . . : 10.1.3.145

Enterprise Manager in secure environment with no internet access

I have Oracle 11g installed in a secure isolated environment, which means there is limited access to the servers, and definitely no internet access from that environment.
I am looking to configure Enterprise Manager / Database control.
I can successfully start up the application server on my database server, and connect to this from a web browser within my secure environment.
However when I try to display the Performance tab, nothing is displayed.
I understand this screen uses an ActivX component.
Is the use of the ActivX component going to have problems because my servers have no direct internet access, or should this not make any difference?
Thanks
Paul Graves

No this is not going to make any difference.
You don't need any internet connection at all for working with OEM GC.
Maybe, if you want to configure the Patch Setup to receive Patch Adviories from My Oracle Support, but even then you can do without a connection from you server(s) to the internet.
Asuming that you are using OEM GC 10.2.0.5, you will also be needing the installation of Flash Player and Adobe SVG Plugin, both to be installed in your browser.
Kind regards
Rob
For more information on working with OEM GC, you might want to check http://oemgc.wordpress.com

E1200 V2 with no "internet access policy" in built-in web-based setup

I just bought a factory refurbished E1200. The label on the bottom says it is a Version 2 model. When I purchased it, it was loaded with 2.0.02 firmware but I upgraded the firmware to 2.0.04
My problem is that I'm trying to setup MAC address-based restrictions thru the manual/web-based setup and when I click on the "Access Restrictions" tab, I only have simple "Parental Controls" and not the advanced "Internet Access Policy".
Is it possible that I have a mislabeled V1 device? If that is the case, how is it that I was able to upgrade the firmware using firmware from the V2 downloads section.
Do V! and V2 units use the same firmware but more importantly, how do I upgrade the built-in software so that I have the advanced "Internet Access Policy" controls?
Thanks!
Eric
Solved!
Go to Solution.

Very strange indeed then! My subtab only has "Parental Controls" listed.
I've compared it to the one shown here ( http://ui.linksys.com/files/E1200/2.0.00/inter_access.htm ) - and mine does not look like this at all!
I think i have a mislabeled V1 model or at least V1 software loaded,
Does anyone know if it is possible to download and reload the software that is built in to the router or do I need to return it and get a (hopefully) new one?
Thanks!
Eric

Is there a way to password protect internet access?

Is there a way to password protect internet access?
Is there a way to password protect the Airport function on my mac?
I have spent some time looking at the forums and on the internet trying to look for a app that can solve my problem. I wish to be able to turn off internet access. I have been using K9 web protection but have found some flaws and bugs. It is a great idea and works well except for the "block any access between(set time) and (set time)" function.
I want to be able to use my computer with out the worry of access to the internet. In my simplistic ideas I need an app that will simply toggle the AirPort function on and off and password protect it. That way when i dont want the distraction in my own life and when i let the rest of the family are playing games the internet is safely protected.
At this time the ethernet connection is not a problem.
I can simply un plug the router however the neighbours around me don't password protect their connections!
If any one knows of a way to solve this or any alternative solutions please let me know.
Many thanks for reading and I look forward to your expertise.
Alex

AirPort Express frequently asked questions (FAQ)
Question: Can I completely turn off the AirPort Express wireless signal when I don't need it? Answer: No, though you can turn the transmission strength down to a minimum setting. To prevent unauthorized access, you can turn on wireless security features.
http://support.apple.com/kb/HT1515
Wi-Fi base stations: Setting up and configuring a roaming network (802.11 a/b/g/n)
http://support.apple.com/kb/HT4260
Check your access privileges
If you enabled encryption on your network, make sure that you set up your base station or router properly. Consult the documentation that came with your product. Make sure you're using the correct settings and password. If you're joining a closed network, a network with its name hidden, make sure that you've entered the network name and password correctly. If the network is secured by access control, make sure that your MAC address is registered with the network administrator. Consult the network administrator for assistance with access.
http://support.apple.com/kb/HT1145
Airport Apple Support
http://www.apple.com/support/airport/

Load Balance guest Internet access via two different DMZ zones at two sites

Hi Sir,
My customer has the following unified wireless guest access requirement:
- There are 2 internet links and dmz zones at two different locations, Site A and Site B
- Data centre is at Site A
- WiSM is proposed to be installed at the Cat 6500 in Site A
- Lightweight AP are distributed across Site A, Site B and other branches
- Only one anchor WLC is proposed at Site A, DMZ zone to provide guest internet access
My customer would like to load balance the guest via the two internet link at Site A and Site B but with the same SSID across all locations. Can it be done since only one anchor at Site A? How about puttting another anchor WLC at Site B, DMZ zone? But how can i establish two EoIP tunnel to two different anchor WLC from a single WiSM?
Thanks for your help
Delon

You can... but you can't control where the traffic will flow. The wlc will determine which DMZ wlc it will use. The wlc will load balance, but traffic in site A might go to site B. I currently have deployed that senerio in multiple client installations....

Unrestricted internet access in recovery mode?

Hi all
I've discovered that when I reboot into recovery mode (Cmnd-R) Safari has unrestricted internet access. This is quite a concern for me as I've got young kids using my computer. I don't want them figuring out that using recovery mode is a way to get around my parental controls.
I've set up parental controls for the guest account and the kids accounts but recovery mode still seems to be unrestricted. Does anyone know how I can restrict Safari?
Thanks very much
Seb

You can set an 'EFI password' to prevent anyone using the startup commands. It will require the password to use target disk mode & the cmd+R etc.
The Apple docs seem old (& I can't see a new version).
http://support.apple.com/kb/HT1352
Intel Macs have EFI, not 'Open Firmware' so the instructions are different.
This seems to cover it…
http://reviews.cnet.com/8301-13727_7-57542601-263/efi-firmware-protection-locks- down-newer-macs/
Just don't ever forget it, some models require an Apple technician to unlock!

ADF UIX Role Based Access Control Implementation

Hi,
Can anybody suggest a detailed example or tutorials of how to implement a role based access control for my ADF UIX application.
The application users can be dymanically added to specific roles (admin, Secretary, Guest). Based on the roles, they should be allowed to access only certain links or ADF entity/view operations. Can this be implemented in a centralized way.
Can this be done using JAZN or JAAS. If so, Please provide me references to simple tutorial on how to do this.
Thanks a lot.
Sathya

Brenden,
I think you are following a valid approach. The default security in J2EE and JAAS (JAZN) is to configure roles and users in either static files (jazn-data.xml) or the Oracle Internet Directory and then use either jazn admin APIs or the OID APIs to programmatically access users, groups and Permissions (your role_functions are Permissions in a JAAS context).
If you modelled your security infrastructure in OID than the database, an administrator would be able to use the Delegated Administration Service (DAS), as web based console in Oracle Application Server. To configure security this way, you would have two options:
1. Use J2EE declarative security and configure all you .do access points in web.xml and constrain it by a role name (which is a user group name in OID). The benefit of this approach is that you can get Struts actions working dirctly with it because Struts actions have a roles attribute.
The disadvantage is that you can't dynamically create new roles because they have to be mapped in web.xml
2. Use JAAS and check Permissions on individual URLs. This allows you to perform finer grained and flexible access control, but also requires changes to Struts. Unlike the approach of subclassing the DataActionForward class, I would subclass the Struts RequestProcessor and change the processRoles method to evaluate JAAS permissions.
The disadvantage of this approach is that it requires coding that should be done carefully not to lock you in to your own implementation of Struts so that you couldn't easily upgrade to newer versions.
1 - 2 have the benefit of that the policies can be used by all applications in an enterprise that use Oracle Application Server and e.g. SSO.
Your approach - as said - is valid and I think many customers will look for the database first when looking at implementing security (so would I).
Two links that you might be interested in to read are:
http://sourceforge.net/projects/jguard/ --> an open source JAAS based security framework that stores the user, roles and permissions in database tables similar to your approach
http://www.oracle.com/technology/products/jdev/collateral/papers/10g/adfstrutsj2eesec.pdf --> a whitepaper I've written about J2EE security for Web applications written with Struts and JavaServer pages. You may not be able to use all of it, but its a good source of information.
Frank

Internet Access Control

Similar Messages

Maybe you are looking for