Internet access to the SolMan

Hi,
I want to know if it is possible to reach the SolMan via Internet access?
We want to give the project members access to the project documentation in the Roadmap.
Until now I could not find any practical links. But I have heard that´s possible via cFolders.
Can somebody help, please?
Thanks a lot.
Cheers

Hello,
If you want to have access to documents which are located on the project documentation tab, one possible work around is to display the document attributes dialog.
From this dialog, you can generate an URL by using the push button with title Create.
This will generate a URL and put it in the clipboard. Then you can send this URL to your project members.
If you want to access the whole project documentation tab, I don't think that there is any functionnality.
Best regards,
Thierry

Similar Messages

Internet access to the guest system for Host-Only configuration

Hello,
I have a windows host linux guest vBox environment and it's configured as host-only. How can I enable internet access within the guest? I am towards the end of a RAC installation and upon running buildcluster.sh, it says the recommended RPM "oracle-validated" not installed or has unsatisfied dependencies. It seems i have quite a few RPMs need to download and thus prefer to be able to connect to the internet within the guest so i can do it from the Oracle yum server.
Thanks,
Harry

Hi,
this won't work so easiliy with a "Host Only" network.
You either need a bridges network or a NAT network.
Easiest thing probably will be to add another interface (network) to the VM and assigned it as bridged.
Then download/update oracle-validated and remove the interface again.
This way, you don't need to change anything on the server.
Regards
Sebastian

Can anyone tell me how I keep everything I had in my old photoshop, now I've updated to Photoshop CC 2014. It did give me the option to transport over all my presets, but because I didn't have internet access at the time, it couldn't do it. Now I'm not

Can anyone tell me how I keep everything I had in my old photoshop, now I've updated to Photoshop CC 2014. It did give me the option to transport over all my presets, but because I didn't have internet access at the time, it couldn't do it. Now I'm not getting the option. Please help.

Migrating Presets does not require a network connection and you can still migrate your cc presets if you still have CC installed. Use Photoshop menu Edit>Presets>Migrate Presets... Migrating presets only migrates presets. It does not migrate Plugins, settings, extensions and scripts. CC 2014 is also not completely backwards compatible with CC. Support for Flash Panels and Oil Painter filter have been removed. So extensions like mini bridge no longer work in CC 2014

Can I use my iPhone to have internet access on the iPad?

Can I use my iPhone to have internet access on the iPad?

Yes, but you have to have your phone set up for tethering. Depending on your carrier that might require a special plan.

Is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't

It the same phone but you don't have to have data on it if you don't want since they are older phones. We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone. Mary

Guest Internet access in the Enterprise

We have set up guest internet access in our enterprise using GRE tunneling with a PIX. I'm trying to determine the best way to do authentication for users on this guest network.
I think I can do RADIUS (using ACS) with the PIX as an NAS. Question is can I use a different type of server (such as MS IAS)? Can I use either one to utilize an existing MS Active Directory database?
If I use radius on the pix for authentication, a login prompt pops up when a user tries to use the web. Is there a way to redirect users to a web page first and have the login embedded on the page? This is done in hotels now and I don't know if there's a Cisco solution for this.

The following documents lists all the supported Databases,
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs33/user/d.htm

I am using a verizion jetpack to wireless connect to an airport express next i want to connect a Airport extreme wired from toe express to create a second private network that has internet access via the jetpack

Thanks for the help after looking over your sugesstion I did some additional troubleshooting which i should have done in the beginning and heres what i found
Airport express is joined to and existing wireless network and i have internet access....all good
I set up my Airport Extreme as follows:
                    Connect using :ethernet
              Ethernet Wan Port : automatic
              Connetion Sharing : Share a public IP address
Tcpip      Configue IPv4: Using DHCP
DHCP                   Begin address: 172.16.22.200
                           Ending address: 172.16.22.254
Wireless    Create a wireless network
                         Wireless network name Test1
                          wpa2 security
This is needed due to set ip address of device on this private network did not address NAT
Conneted Express ethernet port to Extreme wan port
All wired devices have internet access and i get a double nat status which ignore
however my wireless device will not connect.... sometimes they will they want
any suggestions

Here are sceeen shots of the Express

Problems in Internet access in the middle being a modem and Linksys RV016

Good afternoon, I have another problem with Cisco Linksys RV016 Router, the router used to connect to ADSL Internet 3 links which these in turn give direct service to a server right now each of them, the idea is to connect the 3 modems LAN router and connect the server, this is no problem so far. The point is that here at my work people access to Remote Access Servers for Windows and VNC TightVNC or my servers with Linux (ask why not login at TeamViewer or LogMeIn, but it is another matter), the idea is to leave as they are, that everything is apparent and improve systems with load balancing (Router). The modem has ports open for remote access the 3389, are accessed without nigun problem, but when connecting the router and can not, I opened the same ports in Router and name and works.
Servers handle the no-ip.org for access and name resolution on DNS and so with that name assigned by the no-ip is where remote access from the Internet.
I do not know if you understand, but I hope someone help me with this.
In advance thank you very much and greetings.

Look, the first phase of my work to be done is to try a single server and it has Windows Server 2008, you explain:
1. This ADSL modem connected directly to a single server (Windows).
2. It is accessed without any problem by remotely from another network and / or from the Internet via remote access.
3. The modem has port 3389 open to allow remote access from another network or Internet (up to here is my current scheme and there is no problem).
4. Connect between the modem and Linksys RV016 router server.
5. I open the same ports with the modem for remote access.
6. If I have Internet server.
7. Remote access is not working.
As time??? something can be done to solve this problem. The server as you mentioned earlier is running as a service no-ip.org for publication DNS name and not have to be constantly changing the IP by automatic changes made by the supplier (eg server name and for which so is taken from the internet: servidorwin.no-ip-org).
See if you explain me better.
Thanks in advance and greetings.

TS1398 As a truck driver, I don't have internet access, my cell phone doesn't support Apple yet either,,, How can i gain internet access on the road if I'm rolling and not in a stationary place for wifi?

I recently purchased an i pad and have the internet at home, I am also a truck driver and once i leave home, I won't have the internet unless I stop close to where there is wifi, is there anything out there that I can purchase so I will have the internet at all times

I purchased a Verizon MIFI 2200 mobile hotspot with my forst generation iPad almost tow years ago so that I could have internet access with my WiFi only iPad and my iPod Touch. All in all it is pretty reliable but as varjak paw stated above...
"Either of course will be dependening on your being in a location where the carrier provides cell coverage".
Like my cell phone - there are locations where the MIFI doesn't play nice with the cellular networks and it may struggle to find a good signal. On the other hand, sometimes my connection zips along quite nicely. Just keep that in mind - if and when you decide to purchase a mobile hotspot.

FAQ: What if I do not have Internet access at the time I install the Photoshop CS6 beta?

If you are temporarily offline during the installation process, you have a seven-day grace period after first launch of the beta during which you can connect to the Internet and perform the activation. You cannot activate the Photoshop CS6 beta on a computer that is permanently offline.

Migrating Presets does not require a network connection and you can still migrate your cc presets if you still have CC installed. Use Photoshop menu Edit>Presets>Migrate Presets... Migrating presets only migrates presets. It does not migrate Plugins, settings, extensions and scripts. CC 2014 is also not completely backwards compatible with CC. Support for Flash Panels and Oil Painter filter have been removed. So extensions like mini bridge no longer work in CC 2014

How do I update/restore my phone to a different version with no internet access on the machine with iTunes installed?

I have downloaded the version of iTunes needed, and the iOS version I wish to use from work, but am unable to restore the version of iOS as iTunes seems to be blocked at work, and I do not have internet at home, aside from on my phone.
Thanks in advance for the help!
~Nathaniel

You can ONLY restore to the latest available software.
If you have ios 5 on your iphone you can update from the iphone itself.
Otherwise you would need to restore from a computer with itunes and the internet.

Can I purchase something to gain internet access on the go?

I've seen commercials for USB-Drive type gadgets that plug into the side of your laptop and allow internet. Can you buy something like this?

Yes, sorry, I've been following so many posts regarding the Airport problem that I jumped in too soon. As Lyssa stated the Airlink USB is a substitute for the MacBook Airport Card, when mine stopped working months ago.
Again, my apologies and I hope your cell phone provider can offer a solution.

I have an issue with my 3G connection: my iphone can't connect anymore to the data network even though I have a contract with unlimited internet access and the date/3G is turned ON. Anyone knows this problem ?

Hi guys,
This problem showed up a few days ago. Even though I have turned on the 3G and the cellular data, my phone tells me there is actually no connection. But the network indicators shows a maximum network. I went to the genius bar and they fixed it by restoring the phone and it started working again. Then I restored it at home with my back up. Today, it started again: network issue. And the problem does not come from the network (I have tried my sim on another iphone with the same carrier). It really does come from the device.
Any ideas ?
Many thanks

Hello
According to iTunes: About iOS backups http://support.apple.com/kb/HT4946
Yes it saves,
"App Store Application data including in-app purchases (except the Application itself, its tmp and Caches folder).
Application settings, preferences, and data, including documents."
Cheers,
Lima

Internet access using the 3G net in Sweden

Hi! Swedish users hopefully understands what I meen if my English is poor. Thinking about buying a iTouch, my question is if it is possible to get online using a 3G modem? My provider in Sweden is Telenor and I have one of theirs modem.
Thanks!
/u

frittfall,
The iPod Touch uses WiFi only.
The iPhone will use EDGE networks where available. In the U.S. most GSM locations that have 3G also have EDGE, including all of AT&T's 3G areas. EDGE, sometimes called 2.5 or 2.75G, was skipped over in some countries, and so you will only have GPRS (2G) in 3G areas.
Hope this helps,
Nathan C.

Is it possible to be connected with a 3G modem for internet access and a WiFi router for printer sharing at the same time?

For our only internet access we have a 3G wireless modem. I have since purchased a WiFi printer and router to connect all the comptuters to in the house. The PCs have no problem with using both the 3G connection and the WiFi signal at the same time to print, however, the MacBook Pro will not connect to the 3G network and the router, it will drop the internet access from the modem and attempt to connect via WiFi (which has no internet access). Is there a solution that is available to remedy this? I attempted to create an adhoc printer network, however, the macbooks again will not print off of this, only the PCs. And I'm getting a bit frustrated overall with this.

The 3G wireless modem is on one of the PC's correct?
Why don't you pass the Internet through the Ethernet port to the router via Cat5 cable, then have that transmit a Wifi signal that everything else can use, then connect the printer to the router for print sharing?
You would have to turn off the wifi on the comptuer with the 3G modem as it's physically connected to the router and can't connect to the other machines as they are all connected to the router for sharing.
The Mac has the ability to pass, Internet Sharing in the System Preferences.
Do you have software for the Mac to run the 3G modem?

Internet access to the SolMan

Similar Messages

Maybe you are looking for