Internet acting weird since 1st day.

Ok, so... I have 3 routers. a D-link, a linksys and I got my apple router today. I really like the design. anyways... configured it and all the settings and updated to 7.4.2...
IP Adress: 10.31.18.174 (why is that??! my DHCP adress is 192.168... and i changed it from the settings and its still 10.31.18.174?)
Should I put the DNS servers? or leave it in blank? both ways my internet is being wierd. As well for the domaian name... should I leave it in blank?
You may be wondering what do I mean by "weird":
Pages take like 4-6 trys to load.
Internet is sometimes VERY slow
I don't want to return the airport. I know theres got to be something wrong! please help!

Ok I am so ****** in this moment you have no idea. I saved money for a long time to get the supposedly "best router in the world" and my internet is just as bad as it was? Its being the same as my old linksys router! or worse! The only router that works is the D-link for me. just that one! And I don't want to switch back! I want to stay with the apple one but it just won't work!
Why the is my IP adress 10.31.18.174 if I configured with 192.168... ? why?
Why does it take so many tries to reload one page! I already reset the AEBS 3 times! as well as the modem. And called my ISP and did nothing. It just won't work! All I want is a stable wi-fi connection. this is just ridiculous all my settings are prefect and there are no problems being detected in the Logs.
Please I really need help.

Similar Messages

My pointer arrow is jumping around. my windows flip. i can't close windows--there are no 3 colored dots.i don't use a mouse. i just downloaded Lion and my mac has been acting weird since.

ALL OF A SUDDEN , MY POINTER ARROW IS OUT OF CONTROL OR WON'T MOVE. I DON'T USE A MOUSE. THE WINDOWS SHAKE LIKE WHEN I'M TOLD I HAVE THE WRONG PASSWORD AND THEN THE WINDOWS FADE, SWITCH AND/OR FLIP AROUND. THERE ARE NOT THE 3 DOTS IN THE LEFT-HAND CORNER SO I CAN'T CLOSE WINDOWS WHEN I FINISH WORKING WITH SITES. MY MAC HAS STARTED ACTED WEIRD SINCE I STARTED USING LION. HELP!!!!!!!!!!!!!!!

Hi,
I work for Dr Pod, an iPod repair company. This sounds to be that the hard drive is dying in the iPod. As it is an older iPod it is out of its one year warranty, the iPod won't be repaired for free by Apple, and you'd need to consider wether it'd be better to have the iPod repaired by an iPod repair company such as my own, or to purchase a new one from Apple.
If you did choose to purchase a new iPod from Apple, then they do provide 10% off the cost of a new iPod if you exchange in your old one. I'm not sure if this applies to faulty ones though (I have heard of some people being turned away for having a faulty device).
Hope this helps,
Mark Sweeney
Dr Pod Founder

My iPhone 4 has been acting weird since the update to iOS 5.1.1

I charged it to 100% yesterday morning and by the time I went to bed it was at 13%. I didn't do anything I don't normally do. A few games, email, check weather, sports scores; a couple hours of use.
Then this morning I was texting a buddy that's in town and when I got a response my screen just flashed on then off really quick and it make a weird static noise instead of the bell when I went to unlock the phone to read the message. Just before this I changed the volume of the ringer in settings because it sounded really high.
Has anyone else experienced anything weird since updating? I'm trying a reboot and will watch it for a while. Might be time to take it in and have it checked out.

hi Allan,
Can't make or receive any calls. When making a call, you see the thing dialing but no tone, it rings at he other end however. When somebody trying to call me, it does not ring at my end. If you try to end the call, the phone page will just freeze, when you exit the phone page to go try the MP3 player for example, and come back, the phone is still trying to end the previous call. I tried resetting the network settings, turn the phone off and on , no difference at all. It's easter Sunday, everything is closed here in Montreal.

Flickr upload from iPhoto acting weird since last update

Hi
I am currently uploading photos to Flickr on a regular basis.
however since iPhoto's latest update (the one that changed the look of icons in the sidebar...) I am seeing constant problems with uploads. They usually get stuck very shortly after they started. As I am writing this, an upload is stuck at "time remaining: 2 minutes" and has been for over 10 minutes for an upload of just 20 small-sized pics. When the upload is smaller, it gets stuck at the "Pending" state forever (I've left iPhoto running in the background for several hours and it was still stuck at that level after 4 hours).
anyone else experiencing this?
any idea or help appreciated
Note: my iPhoto library is in my Dropbox and I am running iPhoto 9.1.5 on Snow Leopard 10.6.8

I'm having the same problem. Whenever I try to use iPhoto to upload photos to Flickr, it takes a loooooong time, gets hung up a lot, is forever "pending" and is just a huge waste of time! Really frustrating.
I'm running OSX, 10.6.8 and I'm using iPhoto '11 version 9.1.5. I'm uploading the photos at full resolution (3648x2746px), which obviously is going to take longer than uploading smaller versions, but it's not THAT big - shouldn't take all day. At first I thought this problem might be related to some kind of problems with internet connection, but I've tried in a lot of different places, including at home, where i have a great internet connection and normally no problems.
I've been struggling with this for a few months and it's totally driving me nuts - if I can't figure this out soon, I am going to quit using iPhoto entirely.
Does anybody use iPhoto with Flickr successfully?

Mail acting weird since yesterday

Hi all! I'm running OS 10.8.3 on an iMac (Intel). I'm using Mail version 6.3 (1503).
It's been working fine until last night. All of a sudden, it's acting strange.
Here are some things I've noticed:
     1. Often (but not always) when I delete an email, it deletes a second email from my inbox as well — one that's either right above or below the one I meant to delete
     2. When I click on an email to view it (I have my email set up so I can see the list of emails and then the actual email I've selected... see screenshot), it automatically opens the email in a separate window (when I did NOT double click to open it)
     3. When I click on an email to reply to someone, TWO windows of that same email pop up
It's like it's super hyper sensative or something. Any ideas what is causing this to happen? I can live with the second two issues, but the first one is not good. I don't even know what it's deleting.
Thanks!
Julie

Hi Tuttle,
I'm glad you are not experiencing the problem. However, there is NO confusion here - the numbers are random and do NOT represent the incoming or the outgoing numbers of messages as you would normally expect. This morning I got 195 of 195 and got no messages coming in at all! I have been using Macs for more than a decade and this has never happened before. This has only happened for the first time when I changed to Mavericks and is happening on both of my laptops (macbook air and Macbook Pro 15inch) - it is NOT the computer.
"To my eyes, the numbers we see in the Activity pane increase in increments of 1 with each message that is sent or received by a given mail account, starting with "1 of 1" after Mail is launched in any given session" - of course this is what you would expect to happen.
If the problem doesn't exist for you then your comments, as well intended as they are, are not really going to help - it is a bit like me telling you it is raining outside but you are in a railway tunnel - what rain? I am grateful for your contribution and interest so please don't take offence. The issue is known to Apple Techs - they tell me that they can see the same thing happening on their computers - and their explanation of why it is happening is somewhat frustrating and definitely not sitting well with me.
I suppose at the end of the day, if I get my emails I should not be too concerned but for those having this experience it is still a bit lame.
Regards to all....

I am using Iphone 5. Since the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal

I am using Iphone 5. SInce the last 3 weeks the phones has been acting weird. on dialling a call it get hung on disconnecting it stays on the call ending screen only. this happens for atleast 5 to 7 minutes and then it gets to normal or the other way is to turn the device off and then turn it on. the phones also running slow and therefore at times becomes very cumbersome. a few of my friends have also been having the same problems.
I have taken the phone to the service outles but the best they did was to reboot the phone it works fine for a day or two but again the same issue.
Can anyone share any info on it?

I'm glad to hear that they replaced your phone. Any experience I have had with Apple customer service and/or Genius bar has been extremely positive. While I have had positive outcomes from trouble with other phones in the past, they are not as quick and friendly. I had a Motorola phone and a Samsung phone go bad several years ago and warranty work through AT&T required that I wait for a replacement unit and then mail back the original unit to keep from being charged for the device. This usually meant almost a week without a phone. Nice to walk into Apple and walk out with a replacement device. Enjoy your phone.

I'm on a DD-WRT wireless internet service. Could this be causing my iMac to act weird ?

I'm on a DD-WRT wireless internet service. Could this network be causing my iMac to act weird ?

From reading this site and others, looks as if there could be thousands of possiblities/remedies.
I agree. Aside from the very remote possibility that running Java for that "trusted" website allowed some kind of infection--and if it was some kind of exploit, I doubt it would manifest itself in any way you'd notice--there are just too many different things going on for me to give any help.
Why were you thinking it was the router/DD-WRT? What if you connect directly by Ethernet?
Some generic thrings to try.
See if a Safe Boot helps. Shift at the startup chime and give it much longer to boot than normal. Don't open anything, leave it a minute or two and then restart normally.
SMC reset
http://support.apple.com/kb/ht3964
You could try the shotgun approach and reinstall, but first you must be certain to have a completely reliable backup, in case you need to restore.

I cleared the internet browsing history a few days ago. Since then, no history from these few days has been saved in there. How can i get it to save again?

I cleared the internet browsing history a few days ago. Since then, no history from these few days has been saved in there. How can i get it to save again?

I have solved the problem. I accidentally have set it to private browsing.

MacBook Pro acting weird at startup

Hi,
First of all thank you for reading this, it's quite a long story. And sorry for any grammatical mistakes, I'm Dutch.
Summary
My MBP suddenly has been acting really weird: kernel_task eating 150-200% of the CPU which caused a super slow MBP, power button not working well, and MBP shutdown after ten minutes without touching it and with the battery on 90%. I did a clean install of OS X Lion, some PRAM and SMC resets and removed the MacBookPro7_1.plist file from the system library. The kernel_task high CPU problem is now fixed. But the power button is still not working: most of the time my MBP shuts down three seconds after I push the power button in a first attempt. In the second attempt I hold it for like five seconds and this works. Sometimes it works fine on the first attempt. Restarting the MBP from the desktop works fine. I'm also worried about the random shutdown. What could probably cause the problem with the power button and the MBP shutting down when I don't touch it, and is there a way to fix this myself? I'm not really into tech, so please keep your answer simple.
My MacBook Pro "13 (mid 2010) with OS X Lion has always been a charm since I bought it. I've never had any problems with my MBP until now. Two weeks ago I was going on a holiday and had to check a few things on my MBP in a hurry right before I was leaving. I'm afraid I forgot to turn off my MBP before I went on my holiday, but I can't remember this exactly. When I came back after a week, my MBP started acting weird at startup and then became really slow. The kernel_task was eating my CPU with 200% and I've tried many things to fix the MBP myself but it still isn't working well. I hope you can help me with this.
This is what happened:
1. When I push the power button to start my MBP, the first time it shuts down three seconds after I push the button. After the first attempt I hold the power button for five seconds, and my MBP turns on the right way. After all the fixes I've done this is still an issue.
2. When I finally got my MBP started the first time after my holiday, it was really really really slow. I later found out that the cause was the kernel_task eating my CPU. It was using 150-200% with no applications running.
3. The MBP was acting normally (not slow) in safe mode, but in safe mode I couldn't open some sites in Google Chrome, like Facebook and Google Maps. So this didn't work either (and was not the solution to my problem).
4. I did some things with PRAM and SMC reset but this didn't work.
5. A clean install was already on my mind for weeks, so I decided that this was the right moment. After I did a manual backup (not with Time Machine) I restarted my MBP holding some buttons to startup the OS X Utilities screen. I first erased my Macintosh HD and then I wanted to install Mavericks because that was the only option from the menu. It took me five hours and at the end it came up with a 'can't download Mavericks, try again' screen. The MBP wasn't starting up anymore because OS X Lion was already erased.
6. So I became annoyed and decided to use my original Snow Leopard dvd which came with my MBP. Installing Snow Leopard took me two days!!!!!!!
7. When I finally got Snow Leopard installed, it still was really really slow and the kernel_task was messing up my CPU again.
8. After some hours of searching on the internet, I read the following thing: fixing the kernel_task problem was easy by removing a file from the system library (http://www.rdoxenham.com/?p=259). Of course I've researched this solution because I'm not a fan of changing things in the system. But I decided to give this a try and it worked! Like a charm!
9. I still was on Snow Leopard and decided to upgrade to Lion again, because I did know for sure that my MBP could handle Lion and I wasn't sure with Mavericks. So I first downloaded Lion from the App Store and then opened the installation program. This took me one day again, probably because the file from the system library was put back with the installation of Lion...
10. When I finally got Lion running, the kernel_task was using a high CPU% again so I removed the file from the system library again and restarted my MBP. This worked.
11. I'm working on Lion for a day now and I've installed some applications (Adobe CS5 Master Collection, Office for Mac, updated my 17.000 mails in Mac Mail, and installed some browsers). It's working fine and the kernel_task is at 1-10%. The issue with the power button is still there but sometimes it works fine at the first attempt. Yesterday my MBP suddenly shut down when I didn't touch it for like ten minutes. The battery was still on 90%. Maybe this was caused by the fact that my MBP was running for four days non stop because of the OS X installations, and it was a hot day yesterday.
So this is what I've done so far in this order:
1. First of all I did a manual backup on my external HDD. Not with Time Machine.
2. I tried to restart my MBP multiple times. Restarting from the desktop worked well, but shutting it down and than turning it on with the power button didn't work well.
3. I did PRAM and SMC resets multiple times.
4. I decided to do a clean install and erased my Macintosh HD from the OS X Utilities screen at startup.
5. Then I wanted to upgrade from Lion to Mavericks but Mavericks couldn't be downloaded.
6. I've installed Snow Leopard from the original dvd, this took me two days.
7. I've followed the instructions from http://www.rdoxenham.com/?p=259 (remove the file MacBookPro7_1.plist from the system library) and this worked for my MBP.
8. Because my MBP was working fine again, I decided to upgrade to Lion. This took me one day.
9. My MBP was really slow again: Lion put the MacBookPro7_1.plist back in the system library so I removed it again. This worked.
10. The problem with the power button still holds so I did a SMC reset again. Didn't work. My MBP also shut down yesterday when I didn't touch it for like ten minutes. I hope this was caused by the fact that the MBP was running for four days non stop, and it was a hot day so maybe it was overheated.
So everything is working fine again, but the power button still isn't. Most of the time my MBP shuts down three seconds after I push the power button. In the second attempt I hold it for like five seconds and this works. Restarting the MBP from the desktop works fine, and the kernel_task is now using 1-10%. I'm also worried about my MBP suddenly shutting down. Is there a way to fix this myself?
Thank you!
Regards,
TokkieTor

TokkieTor,
This is the full error message I got from the test:
4SNS/1/40000000: IP0R-9:166
I read that those letters (IP0R) stand for different errors in the hardware, in my case it's something with the Power Bus according to this website: http://www.cnet.com/news/how-to-invoke-and-interpret-the-apple-hardware-tests/.
Again, I'm really not into tech so what is a Power Bus and should I be worried?
what you have is a problem with a sensor which monitors power bus current. The power bus is the main pathway along which electricity travels in your MacBook Pro. If the sensor isn’t individually repairable, then you could have reason to worry — if they tell you that a logic board replacement would be needed, then that could cost hundreds of euros. (One would hope that replacing a sensor would not require a logic board replacement, but only hardware experts can say for sure.)
I think that posts here are only editable for ten or fifteen minutes after replying.

Does low disk space make my Macbook Pro act weird?

Hi! I have an early 2011 15" MBP with a 750gb hard disk space. Just the other day, while I was using photoshop with my laptop, the screen went off so I had to reset it. My laptop acted weird after: doing a screen split (the right part goes to the left and vice versa), one time it had weird pixels that were scattered all over, recently, a blue striped screen. All of this froze my laptop by the way. And all of this happened after a few minutes of usage. And I noticed if I use photoshop, it would only take a little amount of time before it would act weird again compared to when I don't. All the times caused me to reset my laptop by holding the power button.
Yesterday, it wouldn't boot past the gray screen after resetting about five times. But after it turned off by itself, I tried turning it on again and it booted normally. And I could use it normally again, but with extra care (using it beside an electric fan, checking the temperature with iStat pro).
I tried the extended Apple Hardware Test but it told me no trouble was found.
Another thing was, everytime my laptop froze and did the weird screen thingy, my laptop was hot.
I tried to use it again yesterday to just surf the web, and after some minutes it was still functioning. But I remember one time I was only surfing the web, it did the split screen and froze after almost an hour or so.
Also, my laptop heats up quickly compared before. And can stand being hot for a long time until now.
I haven't used any heavy applications besides photoshop to test my laptop's weird behavior by the way.
So I guess it's because of the laptop's heat. Because I can only use it for a very short time when using photoshop but I can use my laptop for a longer time when only surfing the web.
I also noticed that if I was forced to reset my laptop and turn it on again, it would boot longer than normal. But if I was able to shut it down properly and turn it on again, it would boot normally.
And, just a while ago, I remembered my laptop's disk space was only 14gb from 750gb (downloaded a lot of series since I bought my laptop). So maybe what's causing the heat was the low disk space. Just a guess. So is it possible that my laptop is behaving weird because of the low disk space?

The problem is back. But this time, it only happened when I used photoshop or played a 1080p video. I was using my laptop for almost 3 hours when i decided to use photoshop. It froze as soon as it started and made my screen display weird pixels. I restarted and tried to open photoshop again and this time, it froze. I did it the third time and after using PS for a minute, it did the split screen. After restarting yet again, I tried to play a 1080p video to just test my laptop. It froze as soon as VLC started. But when i only surf the web (which is the only thing I did before using PS), everything goes well. So I guess it really is the GPU and not the logic board or some other parts. I've decided to just have my laptop checked.

Losing network connection and NIC acts weird from warm/hot weather/temperatures?

Hello.
Is there a known issue on MSI P43 NEO3-F (MSI-7514) motherboards' onboard RealTek RTL8168C (P)/8111C(P) PCI-E Gigabit Ethernet NIC network disconnecting and acting weird during warm/hot weather?
I noticed lately and back on 1/11/2009 night when weather got warm/hot (e.g., my room can get over 85F degrees, but lately it has been 80F degrees), my network would lose its connection. See http://img9.imageshack.us/img9/5580/screenshots.gif for a few SpeedFan's sensor readings when the incidents occurred. I have never seen this happen when the weather is cooler (60-70F degrees in my room).
I also think this only happens if I am using the PC lightly (nothing intensive) like watching fullscreen videos (video overlay), surfing the Web, etc. I don't see any errors or evidences that it happens when idled (e.g., asleep or out). Uptime doesn't seem to matter since I have seen days to 3.5 hours.
I tried upgrading network driver twice (e.g., Realtek_XP_5714_0219 from
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false ...), disabling Kerio Personal Firewall v2.1.5 (XP's disabled already), releasing and renewing IP address (works, but still no network -- can't even ping my router!), unplugging and replugging the cat5 cable (do see the network port lights on), touching the network jack and hardware inside and outside of the case (not hot), trying another cat5 cable and a network port on a switch instead router's), changing from "Minimal Power Management" to full power (no underclocking/slowing down when idled), etc.
During the disconnections, I tried:
C:\>tracert 192.168.0.1
Tracing route to 192.168.0.1 over a maximum of 30 hops
1 * * * Request timed out.
2 * * * Request timed out.
3 * * ^C
IPCONFIG.EXE /ALL when having network problems:
Windows IP Configuration
Host Name . . . . . . . . . . . . : FOOBAR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VMware Network Adapter VMnet8:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.134.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter VMware Network Adapter VMnet1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.80.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter HDTV Tuner 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI #3
Physical Address. . . . . . . . . : 00-D0-D7-30-19-C1
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:04 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:08 PM
Ethernet adapter HDTV Tuner 1:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TechniSat DVB-PC TV Star PCI
Physical Address. . . . . . . . . : 00-D0-D7-30-1A-1D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 169.254.178.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 169.254.178.1
Lease Obtained. . . . . . . . . . : Saturday, February 28, 2009 6:55:21 PM
Lease Expires . . . . . . . . . . : Monday, July 13, 2009 11:28:25 PM
Ethernet adapter Local Area Connection 15:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Physical Address. . . . . . . . . : 00-21-85-1A-C6-72
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.82
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
4.2.2.1
I checked Windows XP Pro. SP3's event logs and noticed these during the disconnections:
Event logs showed:
Event Type: Information
Event Source: Tcpip
Event Category: None
Event ID: 4201
Date: 2/28/2009
Time: 6:42:23 PM
User: N/A
Computer: FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type: Information
Event Source: BROWSER
Event Category: None
Event ID: 8033
Date: 2/28/2009
Time: 6:47:22 PM
User: N/A
Computer: FOOBAR
Description:
The browser has forced an election on network \Device\NetBT_Tcpip_{89F40100-0D8D-4C33-A32D-3D91CAEB3FBD} because a master browser was stopped.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:08 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type:   Information
Event Source:   Tcpip
Event Category:   None
Event ID:   4201
Date:      3/1/2009
Time:      6:19:20 AM
User:      N/A
Computer:   FOOBAR
Description:
The system detected that network adapter \DEVICE\TCPIP_{51FDDE0F-0935-416E-8FE0-3E1A50847D41} was connected to the network, and has initiated normal operation over the network adapter.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 02 00 50 00 ......P.
0008: 00 00 00 00 69 10 00 40 ....i..@
0010: 02 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
I also noticed the disconnections usually start with red X icon in my taskbar with its bubble and then later the long disconnection even though no red X (1 GB and connected). If I were to disconnect the cat5 cable from NIC, then it wouldn't even detect it is missing the cable!
The only way to fix this was to reboot (best way and last longer) OR disable network connection and re-enable it (Windows XP's Network Connections) or the NIC itself (Device Manager), but that doesn't always last long (maybe a minute). Example of my pings right after disabling and re-enabling NIC:
C:\>ping 192.168.0.1 -t
Pinging 192.168.0.1 with 32 bytes of data:
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
Request timed out.
Request timed out.
Reply from 192.168.0.1: bytes=32 time<1ms TTL=150
MSINFO32 in case it helps (seems OK to me, but I am not a hardware expert):
[Conflicts/Sharing]
Resource   Device
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003C0-0x000003DF   ATI Radeon HD 4800 Series
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38
IRQ 21   OHCI Compliant IEEE 1394 Host Controller
IRQ 21   TechniSat DVB-PC TV Star PCI
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
I/O Port 0x0000B000-0x0000BFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x0000B000-0x0000BFFF   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
IRQ 16   ATI Radeon HD 4800 Series
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37
IRQ 16   Standard Dual Channel PCI IDE Controller
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A
IRQ 16   ASUS TV880 Video Capture (NTSC)
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
Memory Address 0xD0000000-0xDFFFFFFF   Intel(R) 4 Series Chipset PCI Express Root Port -
2E21
Memory Address 0xD0000000-0xDFFFFFFF   ATI Radeon HD 4800 Series
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
Memory Address 0xA0000-0xBFFFF   ATI Radeon HD 4800 Series
Memory Address 0xFED90000-0xFED93FFF   System board
Memory Address 0xFED90000-0xFED93FFF   System board
I/O Port 0x000003B0-0x000003BB   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21
I/O Port 0x000003B0-0x000003BB   ATI Radeon HD 4800 Series
[IRQs]
Resource   Device   Status
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 16   Intel(R) 4 Series Chipset PCI Express Root Port - 2E21   OK
IRQ 16   ATI Radeon HD 4800 Series   OK
IRQ 16   Intel(R) ICH10 Family USB Universal Host Controller - 3A37   OK
IRQ 16   Standard Dual Channel PCI IDE Controller   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 2 - 3A42   OK
IRQ 16   Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A   OK
IRQ 16   ASUS TV880 Video Capture (NTSC)   OK
IRQ 17   Microsoft UAA Bus Driver for High Definition Audio   OK
IRQ 17   Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40   OK
IRQ 17   Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC   OK
IRQ 21   Intel(R) ICH10 Family USB Universal Host Controller - 3A38   OK
IRQ 21   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 21   TechniSat DVB-PC TV Star PCI   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A39   OK
IRQ 19   Intel(R) ICH10 Family USB Universal Host Controller - 3A35   OK
IRQ 19   Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20   OK
IRQ 19   Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26   OK
IRQ 18   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C   OK
IRQ 18   Intel(R) ICH10 Family USB Universal Host Controller - 3A36   OK
IRQ 23   Intel(R) ICH10 Family USB Universal Host Controller - 3A34   OK
IRQ 23   Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A   OK
IRQ 20   Creative SB Audigy 2 ZS (WDM)   OK
IRQ 22   TechniSat DVB-PC TV Star PCI #3   OK
IRQ 0   System timer   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 13   Numeric data processor   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 12   Microsoft PS/2 Mouse   OK
IRQ 14   Intel(R) ICH10 Family SMBus Controller - 3A30   OK
My detailed computer configurations can be found here: http://alpha.zimage.com/~ant/antfarm/about/computers.txt (primary computer).
Thank you in advance.

Quote from: NovJoe on 02-March-09, 23:10:05
Force your NIC to run at 100Mbps full duplex and see how it goes.
Check your router / switch ports as well as cables.
I will try 100 Mbps if it happens again. So far, it hasn't occurred after installing the driver supplied by MSI's Web site and not RealTek's Web site. The room temperatures even got warmer like 83F degrees.
As for router and switch, what am I checking for? Other computers didn't have any problems. As for cat5 cables, I already tried another one like I said in my original post.

My MBP has been acting odd since installing N wireless update.

Since installing the N wireless protocol on my MBP my machine has been acting weird. It fails to see wireless networks, the system preferences fails to open at times. OSX freezes, Force quit doesn't actually quit the programs after they have frozen. Basically its so bad i am thinking about re-formatting my machine and starting again, (its only a week old)
Am I the only one who has this?

Well..that is a bummer....
I did notice something else, don't know if it makes sense or not, but if the mac crashes while connected to my Airport Express at home, the Airport Express stops responding and all of the clients that are connected to it stop getting access to the Internet until I unplug it and plug it back in.
When the issue first arose, I thought it was a problem with the AP express, but since it happens even more frequently when using other routers, I know that is not the issue. Besides, everything was fine until I installed the Wireless-N update. I wonder if there is any way to remove the update?
I'll keep playing with it, but hopefully they find a solution soon. Being that our problem is exactly the same, I would be surprised if no one else is having this issue as well.
MacBook Pro 2.33 Mac OS X (10.4.8) 2GB Memory

IBook G3 acts weird

Hello, I'm new around here and I would like to ask some questions.
I don't know why, but my iBook starts to act weird lately. When I put it in sleep mode and then reopen it later, it froze. It has been like this for a few days. Then yesterday, when I was doing surfing on the internet, everythign was lagging and then my laptop froze. So I shut it down but when I start it up, it takes a long time before it gets to the desktop and there's some piercing noise all the long.
Can someone tells me what happens to my iBook and how to fix this?
ibook G3 14 inch Mac OS X (10.3.9)

Pendragon:
Welcome to Apple Discussions. Hope you won't be new for long. It is a good place for Mac users to visit.
Your computer probably needs a spot of maintenance. I would begin by booting from the install disk holding down the "C" key. Go to the installer menu and open Disk Utility. Select your HDD (manufacturer ID) in the let panel and First Aid in the main panel. click on Repair Disk. If DU reports errors, Repair again and again until DU reports no errors. If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
The next thing I would do is to run Unix Maintenance (CRON cleaning) using a utility like MacJanitor or Onyx.
Here is a link to Gulliver's article on OS X Maintenance which I have found very helpful: http://discussions.apple.com/thread.jspa?messageID=607640&#607640
Good luck.
cornelius
Message was edited by: cornelius

Camera app acting weird - not saving photos - iphone 6 plus

I just got my iphone 6 plus... I'm trying to use the stock camera app and it's acting weird. I'm able to focus and take a photo... after I take a pic, you know how the little thumbnail of that photo appears on the bottom left of the app? You should be able to touch that and then view in full screen your last pic, right? Well here is when it starts acting up... When I touch it, nothing happens! I exit the app and go to the photos app and my picture isn't there! The app doesn't appear to freeze - as I can still view the screen and what the camera is looking at! Before the 1st photo is "taken" I am able to choose between any of the photo types (square, pano, video, slo mo, time lapse)... but the same thing will happen no matter which photo I choose. If I pick a video, the video begins and then the touch part doesn't work... the video will run on 'forever' or until i press the home button - in which case the video isn't saved.
I have restarted my phone many times... and even done the power cycle (where you hold the sleep/lock and home button at same time)
Any ideas? Please help - this is a 2 day old phone and the camera doesn't work properly.
What is really weird is that I can post a photo taken by instagram with no problem.. I can also use the Camera Awesome app but the photos aren't saved in the photos app... even if I try to export to camera roll in camera awesome!
Thanks

Hey Bender1031,
Thanks for the question, I can definitely understand how frustrating this issue may be with a brand new phone. Great troubleshooting so far by already attempting a restart and reset. If the issue persists, let’s try restoring your device and updating to the latest software (iOS 8.0.2):
Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
- If the issue is still present, you may want to contact Apple Support.
- If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
Thanks,
Matt M.

My MacBook was acting weird so I restarted it and when I login a white screen flashes and goes back to the login page. Help?

My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?

Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Internet acting weird since 1st day.

Similar Messages

Maybe you are looking for