Internet activity indicator? (using AirPort)

Hi all, is there any little application that will show internet activity using my 17 powerbook (OSX panther + airport)?
problem is, sometimes if I click to view a quicktime/wmv movie etc, I am not sure if anything is actually downloading.
Normally i can see the light on the broadband modem blinking, indicating activity, but my modem is in another part of the building when I use my powerbook.
any ideas?
cheers, Robert

I use MenuMeters available from http://www.ragingmenace.com/software/menumeters/ for this very purpose and it works great. It can also be configured to show disk activity. Very cool little program, released under the GPL for free (although the author does accept donations!).
17" Powerbook 1.67 5,7 Mac OS X (10.4.4)

Similar Messages

Internet is slow using Airport

For some reason my internet is slow when i am using Airport at home. But when I am at my friends house using airport is much faster. Can someone help me solve this issue. My internet is too slow at home...help, thank you

I had a slowed internet problem for a few weeks after using train wifi. While on the train I altered my Location settings in Network preferences. Last night I looked at Location settings and found my home router was not actively chosen. I made the selection and I'm up to speed again. Hope this helps.

Internet connection loss using Airport Extreme and Netgear DG843

Hello,
I am accessing internet via a Netgear DG834 router (not wifi), connected to an Airport Extreme base station. Most of the time, I can access internet through the Wifi network of the AEB without any problem. But around once a day I am experiencing connection loss and the only way I found to restore it is to reset the Netgear Router by physically unplungging it.
Both the Netgear and the AEB have up to date firmware, so I suspect some kind of problem in my setup, as I am not an expert in setting up networks.
Is it possible that using a Netgear Router connected to the AE (which is also a router if I understand correctly) could cause connection problems ?
I am at a loss, and do not even know how to describe the relevant informations of my current setup. If a kind soul could help me nonetheless, I would be very gratefull.
Mr Pedrito
Powerbook G4 Mac OS X (10.3.9)

Is it possible that using a Netgear Router connected
to the AE (which is also a router if I understand
correctly) could cause connection problems ?
Yes.
Ensure that that the AEBS is configured to not distribute IP addresses.
Also ensure that the AEBS is on a different channel to the DG834G.
iFelix

Loss of Internet Connectivity when Using Airport

I have my Airport Express talking to my wireless Dlink DI514 router for iTunes. This worked great for several months, but all of a sudden I am having problems connecting to the internet.
I spoke to comcast, and they see no problems in my area - they said it could be a router issue. Later I noticed that I only have problems connecting to the internet when I am using my Airport express to play music on my stereo system (which is most of the time).
Has anyone had this kind of problem before? Could it be that my router has gotten sick and can't handle iTunes and connecting to the internet simultaneously? I'd have posted this question on the Dlink site, but I don't see any message boards there. Any ideas?
Dell Windows XP

Ensure that your AirPort Express (AX) is configured as a wireless client of the D-Link. The instructions are in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

I don't need a data plan or internet plan for using airport ?

I understand that all the airport's do not need an internet plan, is just connect to a AC adapter and you have free wi-fi or not?

Sorry, but your understanding is not correct.
If you want the AirPort to have Internet capability, you will need to provide a broadband Ethernet Internet connection from a service provider to the AirPort.

Slow internet speed when using AirPort

Hi
I guess this may have been discussed before, but I could really do with some clear advice on the subject. I own a 2007 Mac Pro with an AirPort wi-fi card fitted by Apple as an option when I bought the machine. However, for some time now, I have experienced problems with my wi-fi connection when on the net.
Firstly, there's the signal. When I switch the computer on first and then access the internet, all four bars on the AirPort icon on my desktop are in black. However, after a while this starts to drop to three or two - sometimes even just one. The connection speed to the net decreases as the bars drop. When all four bars are filled in black, my connection speed is still not very good. My Mac Pro is not really far from my AirPort Extreme - in fact I have tried my old Windows XP based laptop in the same room and it appears to be fine provide better access speeds (even though it's an older machine)!
Secondly, my Mac Pro doesn't seem to like my 8 digit WPA-PSK security key on my modem (accessed through the AirPort Extreme base station). When I disconnect and try to re-connect to my network (as sometimes this helps my connection speed when it's low) the Mac asks me to punch in my key. I do this and it never seems to recognise it. Tried changing the password key through my modem's settings via an ethernet cable, yet still - when asked to type in the key when trying to access wirelessly - it is not recognised.
Can anyone offer any advice?? I have a Netgear modem/router with an AirPort Extreme 802.11n base station. I purchased my Mac Pro June 2007 from Apple.
Thanks

07-Nov-200710:32 AM
android wrote:
Maybe you haven't noticed that transfering or loading software with cable connections much faster than bluetooth. It's something todo with handshaking in laymans term.
WIFI nor WIMAX can't even come close to speed of wired networking!Message Edited by android on 07-Nov-200710:35 AM
I know cable connection is faster than bluetooth. But BT connection shouldn't be that slow.

Internet slow when using airport extreme

First off I don't understand the intricacies of networking at all.
THat said when I connect my macbook pro to the modem directly I get around 15meg download using a speedtest website.
Using the wireless I'm lucky to get 2meg. It's an airport extreme dome so it's more than capable of handling the speed.(right?) I assume the built in wireless card in the MBPro is equally capable.
So, is there anything I can do to improve things? I live in an apartment where there are many wirelses networks if that's relevant.

Well I seemed to have improved this dramatically by changing the security to WPA2. But that has created a problem with my powerbook as it cannot see the network.
I'm guessing that's a problem with the powerbook's airport card?? Can I update this?

MacBook Pro loses connection to Internet after sleep using Airport Time Capsule

I recently upgraded to Mavricks and then added a new Airport Time Capsule, and now I my MBP will not connect to the wireless LAN after waking up from sleep mode. My MBP worked great for over a year with an non-Apple router, so I am thinking that there is a new Apple computer-to-Apple Router issue going on. Any thoughts, suggestions?
I read all the threads and have followed all the simple advice, such as making sure the Airport is at the top of the network priority list, etc, to no avail. I end up having to reboot my MBP to get reconnected, which is super frustrating.
MacBook Pro 17" (late 2011)
OSX v 10.8.5
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,3
Processor Name:          Intel Core i7
Processor Speed:          2.4 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          8 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.70f6
Serial Number (system):          C02HH142DV10
Hardware UUID:          C6AC7046-2B2B-5DE5-BE83-447EAE22E250
Sudden Motion Sensor:
State:          Enabled
Network
Software Versions:
CoreWLAN:          3.4 (340.18)
CoreWLANKit:          2.0.2 (202.11)
Menu Extra:          8.1 (810.11)
configd plug-in:          8.5 (850.252)
System Information:          8.3 (830.5)
IO80211 Family:          5.3 (530.5)
Diagnostics:          2.1 (210.25)
AirPort Utility:          6.3.1 (631.4)
Interfaces:
en1:
Card Type:          AirPort Extreme (0x14E4, 0xD6)
Firmware Version:          Broadcom BCM43xx 1.0 (5.106.98.100.17)
MAC Address:          10:40:f3:b1:49:36
Locale:          FCC
Country Code:          US
Supported PHY Modes:          802.11 a/b/g/n
Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless:          Supported
AirDrop:          Supported
Status:          Connected

Hello ghesser,
Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro after setting up your Time Capsule. I would be concerned about this too.
I recommed reviewing the full article and specifically the section labeled, "Symptom: The network connection drops unexpectedly" in the following article to resolve an issue like the one you described:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thank you for posting in the Apple Support Community.
Best,
Sheila M.

Use airport for internet and ethernet for local?

Hi. Ive searched around and cant find an answer for this.
I have a 27" imac connected to my router and all works fine for accessing the internet.
I have several other devices close by that I want to connect via ethernet. If i connect the imac to another router via ethernet I can browse my local devices but loose internet connectivity. It is as if the imac will suspend the airport connection while the ethernet cable is connected. I don't want my second router to act as a bridge as it doesn't support N speeds.
Essentially, I want the imac to use airport for internet and the ethernet port for local files.... The only workaround I have is to unplug the ethernet cable from the back of the imac when i want to use the internet. I'm hoping it's just a DNS issue, but cant seem to resolve it.
I do not need internet connectivity for the other devices and don't see how i can do that without enabling the wireless side of my second router and then creating a bridge...
Any suggestions?

It is as if the imac will suspend the airport connection while the ethernet cable is connected.
The Connection Order on your iMac is set so that if both AirPort and Ethernet are "on", the iMac will give priority to the Ethernet connection.
If you want to configure your iMac so that it gives priority to an AirPort connection if both AirPort and Ethernet are "on", give this a try:
Open System Preferences (gear icon on the dock) and open Network
Click on the small gear icon at the bottom of the connection list on the left
Click on Set Service Order and drag AirPort to the top of the connection order list
Click OK, then click Apply
Now, if both AirPort and Ethernet are active, your iMac will give priority to the AirPort connection. If you want to connect using Ethernet, you will have to turn AirPort off by clicking the fan shaped AirPort icon at the top of your computer screen.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

You can set up daily time limits for each computer that connects using wireless, but it is not possible to do this when a computer is connecting directly using a wired Ethernet connection.
Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac and click Manual Setup
Click the Access Control tab below the icons
Select Timed Access
For more details on this, click the Help menu at the top of the screen and enter the following phrase into the search box:
Controlling access to your wireless network
A more sophisticated approach would be to use a service provided by OpenDNS. From your computer, this would allow you to monitor web sites visited, and block any unsuitable sites. More info is here:
http://www.opendns.com/landings/familyshield

I have an imac with internal airport on for ipad and iphone use how do i get my HP laptop to use internet thru the macs airport

I have an imac with internal airport on for my ipad and iphone to have wifi internet connection thru dsl ethernet wired modem , How do iget a HP laptop to use airport connection

Hi..
Try this thread > https://discussions.apple.com/thread/3285582

I want to use Airport Express in my hotel room using the wired internet connection, but I don't carry a computer, just my iPad. Is that possible?

I want to use AirPort Express when I am traveling. I would like to use a wired internet connection in a hotel room to create a wireless connection. However, I do not normally carry my laptop, just my iPad. Is it possible to do this?

You will have to pre-configure the Express using AirPort Utility on your computer before you leave on the trip. The Express will store and remember the settings.
You might want to check with the hotel in advance to make sure that they have Ethernet ports available. Most hotels have switched to wireless and the others are not far behind.

HT1515 How to setup laptop use both 3G internet and audio via Airport Express

Laptop connected to internet via 3G mobile phone network, but when connected simultaneously an Airport Express to stream audio, the laptop can not connect to internet as it try to connect internet through Airport Express. So how to setup to use both.

Thanks jakeloveslucy.
I tried to setup the network by using Airport Utility, the problem is Airport Utility can not find Airport Express while I can use Airport Express to stream music very well. Can you suggest to fix this.
I use windows 7 64 bit sp1 ; Airport Utility 5.6.1.
[img]http://no4.upanh.com/b2.s29.d3/cc356ba2635bf1f46b71912fa1e6ce43_46991874.2012070 8133759.jpg[/img]
[img]http://no6.upanh.com/b4.s29.d4/a0f5f05c0f2ec0f5e94b40bc7c8e2986_46991876.2012070 8135000.jpg[/img]

Problems connecting to Internet using Airport - can anyone help ?

I'm using a MacBook running OSX 10.4.11, trying to connect to internet using Airport. I connected OK first time, but after powering off the Mac, each time I now try to connect again, the Mac can't find the network. Network Diagnostics can't fix it either. I use a Linksys wireless router, connected to an ADSL modem. I use PPPoE. I live in Borneo, and the line connection is not great, occasionally the phone line drops out and then modem reconnects itself, I wonder whether this is causing some sort of problem with IP settings. The only way I can connect wirelessly is to start the Mac, reboot the modem, then the router, and plough through Network Diagnostics. A real pain. Help much appreciated.

I have a Linksys Wireless-G (model WRT54GS). This is working ok because I have two other wireless devices (internet radio and iPod touch) which connect fine. Firmware is up to date. I've done a bit more troubleshooting, and the the problem is connected with the phone line, which drops out all too regularly. Each time the phone line drops out, the Mac is unable to connect to the network wirelessly. After going through Network diagnostics, and rebooting the modem+router, it comes with a message saying "Network changes detected", and then I can reconnect OK. The funny thing is, the IPod touch can always reconnect no problem, even if the line has dropped out since the last login. Given that I've got a crappy phone line conection, is this normal or is there something wrong with my Mac settings ?

When I try to open Safari, I get NCSW21 and that server can't be found. This happens everytime. I am using AirPort and have a strong internet signal. I have no problem opening Firefox and surfing the web. Only with the Safari page. Can anybody help.

Can't open Safari. I get "Can't find server". I get NCSW21 in my address bar. I am using AirPort and have a strong internet signal. I have no problem opening Firefox and surfing the web. Need help. Thanks

Hi Professor66,
I have a couple of suggestions for you regarding this issue. Here are two links to users who have posted similar questions to yours and have found their answers in the responses to their posts:
Safari hangs when loading web pages. | Apple Support Communities
https://discussions.apple.com/thread/3784708
Safari loading blank pages | Apple Support Communities
https://discussions.apple.com/thread/3899912
I would suggest that you first follow the troubleshooting that the OP did in the second link, which is to test in a new user account to see if the behavior is consistent. If it is, you may need to address the issue at a software level by re-installing Safari. More information on this process can be found in the following article:
OS X Mavericks: Reinstall apps that came with your Mac
http://support.apple.com/kb/PH14193
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Internet activity indicator? (using AirPort)

Similar Messages

Maybe you are looking for