Internet bandwidth usage reporting in real time
Need some guidance with regard to software selection and physical layout. I've been asked to provide reports on internet usage;
- IP address
- port/protocol
- bandwidth
We havcusco cisco 4500.
Our ISP router is 3400 metro router (fibre to Ethernet media converter).
We have the ISP connected to a port on the 4500 in vlan 99, the users are in vlan 44 (using a virtual layer 3 gateway).
If I want to do just a quick capture could i simply connect a workstation with wireshark to a port on the 4500 and place that port in vlan 99?
If so I assume the same theory would work with tool like bandwidthD that is more suited to long term captures and has a nice pretty GUI for my manager?
Bit confused as to whether I need a mirror or span port setup.
Thanks
You'll need to configure SPAN with VLAN 99 as the source and the port your reporting workstation is connected to as the destination. Otherwise most of the traffic will never reach the reporting workstation.
Similar Messages
-
WTR1900 Internet Bandwidth Usage Report
Hello,
I have many client devices connected to my WRT1900... When I click on the Internet Bandwidth Usage Report, the results have every device listed as 0.00 MB of internet traffic. Well, every device on my network access the Internet constantly.
What am I missing to have this report actual provide some information?
//BrewHi @brudertl,
I also got confused with this before. I just tried to powercycle the modem, router and all the devices on the network. This might help. -
What Is The Network Bandwidth Usage Report?
I'm looking at the "Network Bandwidth Usage" report and it's just a list of devices with no bandwidth numbers? Is it ordered by amount of usage and if so, why isn't the usage displayed in the report and how do I see the usage for a device?
This topic first appeared in the Spiceworks CommunityPage 22 of this document will give you some numbers that will allow you to estimate the total data used for a meeting. Keep in mind these numbers are what Adobe saw as average consumption, yours may be higher or lower.
http://www.adobe.com/content/dam/Adobe/en/products/adobeconnect/pdfs/web-conferencing/Adob e-Connect-9-Technical-Guide.pdf -
Share Internet and Usage Reporting
Hi,
I've been from Novell for some time and I've been trying to understand a little bit more about how the Novell Open WorkGroup Suite Small Business 2.5 and I was wondering how can I share the internet to the users and view logs of what sites are being accessed by user. I know I could do this with Bordermanager but I dont know if this is something I can do with NOWS SBE.For what it's worth, I know of no way to do this natively in NOWS-SBE 2.5; I
use unTangle boxes in front of my servers to facilitate exactly what you're
asking for, in addition to spam, malware, and antivirus, web filtering, web
failover, bandwidth usage, intrusion prevention, protocol control and
firewall. It works perfectly, and I have had no problems with it in
conjunction with NOWS-SBE in any release.
"adelaespriella" <[email protected]> wrote in message
news:[email protected]..
>
> Hi,
>
> I've been from Novell for some time and I've been trying to understand
> a little bit more about how the Novell Open WorkGroup Suite Small
> Business 2.5 and I was wondering how can I share the internet to the
> users and view logs of what sites are being accessed by user. I know I
> could do this with Bordermanager but I dont know if this is something I
> can do with NOWS SBE.
>
>
> --
> adelaespriella
> ------------------------------------------------------------------------
> adelaespriella's Profile: http://forums.novell.com/member.php?userid=6667
> View this thread: http://forums.novell.com/showthread.php?t=420306
> -
Oracle reports in real time?
can any one brief me about the kind of oracle reports do they generate in real time?i.e d2k reports . . iam facing tough to answer these questions in interview?can anyone examples abt use of it in real time?
at my work i use dev suite 10g on windows, and the application server is also on windows.
i compile the fmb into an fmx directly in forms builder. open the form in forms builder and the option is in program->compile module on the menu.
there is also frmcmp which you can run, which can also compile the fmb.
once i have the fmx i just copy it to the server into the directory where our forms expects it to be (you can see that in the forms server configuration - FORMS_PATH)
as for the reports, we're still a throwback to the the good old days, so all our reports are still in .rdf format. this does not need any compiling as the reports server will do that when it is executed. so like the .fmx, i just copy it to the directory where our reports server expects it (again you can see this in the reports server configuration - REPORTS_PATH)
we're just a small shop, so there are probably better ways to do this, but that's how we do it. be happy to hear how others do it... -
Report on Real Time Cube and Master data
Dear Experts,
I am new to BI. I have created real time cube using some characteristics and top of that I built 3 reports with referring to Master data.
And in the 3 reports, I have used different characteristics for all the report expect one ( common in all the reports).
Now I have to create consolidated report using all the characteristics. I have build some sample reports but getting not assigned where there is no data.
How can I achieve this?
Thanks in advance,
Saravanan RHi suman,
Thanks for your reply .
I have attached the screen shot of the output. I have created the Infoset using info objects and real time cube, on top of that I have created query.
this is the problem am facing can please suggest on this . -
Best practice for real time requierement
All,
I am trying to find out what is the best practice for reporting against real time data ?
is it while using
1 - webi against universe/bex query on the top of hybrid cubes ?
2 - Crystal report directly against the ECC data ?
3 - using another solution such as Data Fedrator ? or something different ?
I am looking to know if anyone got such req and also to share their experience
did they get some huge challenge against hybrid cubes ?
Thanks in advance for your help
PhilippeWell their first requierement was to get real time data .. if i am in Xcelsius and click refresh then i want it to load my last data ..
with live office , i can either schedule a crystal report and get the data delayed or use the option from live office to make iterfresh as right now .. is that a correct assumption ?
I was talking about BW, just in case they are willing to change the requierement to go from Real time to every 5 min
Just you know we are also thinking of the following option:
1 - modify the virtual provider on the CRM machine to get all the custom fields needed for the Xcelsius Dashboard
2 - Build some interactive report on the top of these Virtual Provider within CRM
3 - get the link to this report , it is one of the Report feature within CRM
4 - design and build your dashboard on the top of it
5 - EXport your swf file to the cRM web ui
we are trying to see which one is the best one
Philippe -
Need to monitor any file change in the system, in real time
Hi,
I am running a program that I suspect may be doing changes in the filesystem, but I do not know which ones. I would like to know if there is a daemon/program that could help me monitor those changes. I tried AIDE, however, it works by creating a database of checksums for each file and does not report in real time potential changes. I would rather use a program that logs changes and timestamp them. Furthermore, AIDE is not useable with /var files, since there are many of them and they change so often. Is there another good solution?
Alternatively I would like to run the program with monitoring. For instance, run the process as:
monitor_program my_program_to_monitor logfile
This would dump in logfile what my_program_to_monitor does to the filesystem.
Thanks in advance.
Last edited by zebulon (2011-08-24 15:44:10)no, at least with inotifywait, it is not possible. once you know what file is being changed you can use "lsof" to see what process have opened that file.
i tried the following to search lsof output first thing when inotifywait finds a file change.
file=$(inotifywait -r /home/mang/watch --format %w | sed 's/.$//'); lsof | grep $file
while in another terminal running "vi /home/mang/watch/test"
the output is:
zsh 12574 mang cwd DIR 254,11 4096 4723089 /home/mang/watch
vi 16790 mang cwd DIR 254,11 4096 4723089 /home/mang/watch
try it! -
Not able to run Real Time Report(Live report)
Hi all,
I am working on a report which need to be run on real time, i am facing difficulty while running it at my end(India),
getting error as View Display Error whereas my counterpart in United States running at her end getting the result easly,
server is located at United States,we share the same internet speed,I tried different means by putting appropriate filter
in order to reduce the data size but still couldnt see any result. Can anyone please suggest me what is the issue
and what need to be done in order to get the results for real time report faster at my end.
Thanks for help.A couple of suggestions.
First, make sure you are reproducing the report conditions as well as the user access settings. Different user access can make a big difference in report performance.
Second, enter an SR with Oracle support. They may be able to help troubleshoot connection issues.
When we see dramatically different response times in different locations, this usuallly means a network issue. It may not be in your corporate network, but somewhere between you and the data center. -
Can somebody give some real time questions for alv report
hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva -
UCCX 10.5 Real Time Report shows "Not Connected"
Hi,
UCCX 10.5 HA over LAN.
As per the title, RTR shows Not connected for both nodes and no data shown for all reports. all services are In service in both nodes.
Any Ideas?
Regards.Hi Mohamed,
Are you accessing this via the IE or FF? If so which version?
The Real time reporting on UCCX connects to the RMI port 6999 to pull the information on the Engine. If there are no port blockages or if there are no issues with the browsers, then it is a problem with the configuration files in root holding this information which needs in depth analysis.
A restart of the Engine also should help. I know that everything is IN SERVICE, but I have noticed a lot of issues on UCCX 10.5 when there are stuck calls on the system, it impacts RTR with the midnight stats reset.
The reset of the Engine is bound to clear all the stuck calls in the system and this may be a side effect of the stuck calls on the system especially if the RTR was working before you noticed the problems.
Regards,
Arundeep -
Webview not showing real time reports
Hi,
I have a customer with IPCC Enterprise 7.5 and using the Webview for reporting. The Real Time reports are empty although campaigns are running and agents are logged in. The Historical Reports works absolutely fine. I noticed that for the dialer port status report, I had to enable a setting through the registry, according to the following document:
http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_tech_note09186a00801dc6cf.shtml
I changed that and then the Real Time report for the dialer port status works. Nothing else from the Real Time reports returns any data.
Thank you,
AgelosWe are using only the Outbound option, so it's only for the outbound. It doesn't give me any Real Time report except the dialer port status. It doesn't return any error, but the report is empty.
-
UCCX 7 (SR4) - real time reporting based on option choosed
hello,
i would like to extract real time information on wich option the client choosed on my uccx7 script. I know where to get in the database some info from the queues (Summary Tables), and i would like to make some custom real time reporting based on wich option was choosed to know how many callers choosed the voicemail option (so the call won't show up as abandoned).
Is there any way to get real time info from a custom variable in real time? in wich table?
thank,
met.IVR selections are not recorded within the CCX databases. You would need to save this to an external database and report from there. Your only method of capturing this within db_cra would be to store a value into an enterprise data variable which can be seen on historical reports.
Also, the only tables that are "real time" are those identified as such: RtCSQsSummary and RtICDStatistics for use by wallboard applications. -
UCCX 9.0 real-time reporting
Hi,
I need information about UCCX 9.0 real-time reporting. What are the real time reports available on UCCX 9.0.
How to run this real time reports.
Regards,
Dinesh JoshiHi Dinesh
It's similar stuff to what you get in the Historical Reports - e.g. number of contacts, abandons, available agents, state of agents etc etc but counted up for that day and shown in real time. They're very basic looking tabular data type report generally, Supervisor can do some basic charts but nothing exciting and they aren't designed to be exporable.
Is there something specific you are looking for? -
Please send me some real time quetions in REPORTS/ ALV REPORTS
please anybody can send me some real time issues and quetions from REPORTS,
ALV REPORTSHi,
Report is basically a program which extracts the data from the database tables based on some inputs and gives the output as a list.
Report are classified as Classical Reports, Interactive Reports and ALV Report.
Classical Report is a normal report which just displays the output.User cannot interact with that report.
Interactive Report is nothing but, a user can interacte with the report.After a basic list is displayed, user can click on some field on the list which generates a secondary list giving the necessary information relevant to that field.
ALV Report is to provide users with a consistent, user friendly and functional method of manipulating the data, which appears on report lists. ALV provides more advantages than the normal report
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_REPORTS_FAQ.html
http://www.sap-img.com/
http://www.sapdevelopment.com
http://www.sapmaterial.com
ALV programs.
http://www.geocities.com/mpioud/Abap_programs.html
. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
ALV
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Top-of-page in ALV
selection-screen and top-of-page in ALV
ALV Group Heading
http://www.sap-img.com/fu037.htm
ALV
http://www.geocities.com/mpioud/Abap_programs.html
Regards,
Priyanka.
Maybe you are looking for
-
Tax Jurisdiction Error While Doing ABZON -AssetTransaction
Hi, While implementing the SAP,we have defined the Tax Jurisdiction Codes with 9 digits.After that client requested to change the Tax Jurisdiction Code to 10 digits and we removed 9 digits and Created Tax Jurisdiction with 10 digits and moved to Prod
-
After recently installing itunes on my new PC running windows 8, the CD/DVD drives no longer works, gives a code 19 message. Seems itunes is impacting the registry of the DVD drive. What is best solution to keep running itunes normally in the future
-
I've seen that others have experienced this. I've tried the suggested settings & adjustments as described. Still not very good. I was quite happy to ditch media Player, but may have to reconsider. I like iTunes (apart from this issue). Is there a def
-
"Other" Taking too much space...
My iPad 3 has had ios7 for a while now and just in the last month or so "other" has taken about 8 gb of memory. What is inside "other" and how do I reduce it?
-
920 lumia goes no further than initial Nokia scree...
HELP! My phone was reating oddly while I was busy with an App (vivino). Long story however: 1. made a backup of my files to the laptop. 2. went to settings / info reset factory settings 3. confirmed reset. Got 2 cogs turning, 2,5 hours later still 2