Internet/browser/automatic updates help please

Starting yesterday, most websites won't load in Safari, Chrome, or Firefox. Facebook works, youtube works, I can do a search on google and see results. When I click any external link it doesn't work, and typing most urls doesn't work either. However, I found that by using Miro, I can type the url or copy/paste a link and it works fine! (E-mail is also unaffected)
I only noticed the problem yesterday when starting up my computer and it installed automatic updates for: safari, iTunes, keynote, and killerkeys. I haven't been able to uninstall the updates to see if that would fix it,
I don't know enough about miro or the browsers to have a clue as to why something would work there and not other places.. any clues?
I'm on a work computer now, but any help is greatly appreciated!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

I can not connect to app store and I have internet conexion. Any help please?

I can not connect to app store and I have internet conexion. Any help please?

Hi Rhiannon.A,
Try to reset all setting on your phone and see. If issues still persist try to back up your phone using iTunes and restore it using computer.

Help, lost my internet browser after updating software

Help, I just updated to the latest software,version 4.5, and now where on my home screen can I find my internet browser, only the media net browser, I have tried to change the options to internet browser from media net and nothing happens, can anyone help? thanks, Robyn

Well, first things first, disable dhcpcd.
# systemctl disable dhcpcd
Then, in your system, try running it manually, and see what happens.
# dhcpcd
Cheers

Automatic Update Help Needed

My OS is Windows 7 64bit and my browser is google chrome. I have Silverlight 5 (5.1.30514.0) and I am unable to check the automatic update setting. All of my updates are current with all of my microsoft products

Hi,
You could try to update your silverlight manually.
You could download the latest silverlight that suits your system from :
http://www.microsoft.com/getsilverlight/get-started/install/default.aspx?reason=unsupportedplatform
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't connect to internet after automatic update

Firefox had an automatic update this morning and ever since then I always get the page "The connection was reset". Msn messenger still works so the internet connection isn't the problem. This is on my laptop(I'm currently on my PC) and it's on Windows XP, it's firewall is ESET Smart Security. I checked Error Console and there's one that appears, "Livemark Service: feed processor received an invalid channel for http://en-us.fxfeeds.mozilla.com/en-US/firefox/headlines.xml"
== This happened ==
Every time Firefox opened
== Automatic update on June 27, 2010

nvm i just had to change connection settings to auto-proxy
the auto update must have changed the settings

Cannot open itunes now I've downloaded the update - help please

I launched my itunes and had a message asking did I want to install the updated version. When it finished installing it said it needed to shutdown and restart - which I did. When I tried to reopen itunes from the shortcut it said it cannot open it coz some files are missing. Can anyone help please. I have contacted apple and although i've had my phone for over 90 days they have emailed me steps on how to uninstalled and reinstall safely. However, once I got the email, the first thing it tells me to do is to launch itunes which I can't do. can anyone help please? Many thanks.

Hi,
Try the following
First of all, see if you can uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
If this completes, restart the PC.
Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
After the installation, restart the PC again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

3GS update help please.

Hi,i updated 3gs through itunes and i thought it worked,however it will not activate neither thru itunes or wifi.i have restored with no success.im now stuck with a phone that i cant go forward or backwards with.any help please before i go mad?
The phone does say connected to itunes sometimes however itunes just says "cannot activate at the moment please try again later"

Sounds to me like the phone was hacked or jailbroken to unlock it. If that's the case, the update has bricked it. It will not be able to activate.
If it was jailbroken or hacked, we can not help you here.

TS3694 Apple 4s stuck in a loop and not restoring or updating Help please!!!!

Apple 4s stuck in loggo loop and not restoring or updating. I have tryed all the recomended stuff all the youtube video EVRYTHING!!!!! I cant think of any reasone for it to not work .one minuet it was playing music on my sterio and the next this loggo loop.   HELP PLEASE!! **** YOU APPLE!!!!

Maybe:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Or
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Z10 won't complete setup after device software update, help please.

Help please, cannot complete phone setup ater performing software update using Blackberry Link.
Sequence of events;-
Phone recognised by Blackberry Link.
Reload device software selected - updated version 10.0.10.90 available.
Get update - software appears to load correctly then Z10 unplugged.
Phone reboots, Welcome to Blackberry, English(UK) ticked, swupe left.
No SIM card available, swipe to WI-Fi.
Password entered for home network and confirmation screen shows connected.
Agreement Screen - Country changed to United Kingdom(English),
at bottom of screen under I agree to the Blackberry SLA....
the 'I Agree' and 'I Do Not Agree' buttons can not be selected and
after a short delay Unable to connect screen appears.
Pressing 'Settings' goes back to Wi-Fi Networks page with
confirmation that connection is good and round we go again.
Having performed software update several times as above and also from
www.BlackBerry.com/updates by following forum posting at
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-
to-Reload-your-Blackberry10-OS/td-p/2187545
and getting the same result each time I would appreciate help to resolve this issue.
Solved!
Go to Solution.

Try finding a different open free Wifi hotspot to perform the setup.
It sounds like the device is never connecting to your WiFi to complete the setup.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi, I recently got a newer desktop to replace my old laptop and I uploaded my pics with my picture keeper and I can find them in images BUT I can't find iPhoto. On all my other device sit always loads to iPhoto automatically! Help please!

HHi, I recently got a newer desktop to replace my older laptop and I upl my pics from my picture keeper and I see them in images but I can't find iPhoto! Help please.

With the amount of information you've provided it's impossible to offer a solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using? A new iMac will have Yosemite. Confirm.
what system version are you running? Download iPhoto 6 from the App store. Did you?
what do you mean by "picture keeper"?
have you looked in the Applications folder for an iPhoto application?
is your iPhoto Library in your Pictures folder ?

Wifi doesn't work very well since ios6 download. Worked fine before update, help please

wifi doesn't work very well since ios6 download. Worked fine before update, help please

I reset modem and router. Still have the same issue. I have a laptop connected to the network as well as a PS3. Both are working great. Did a Speedtest app test on iphone. With 3g it was working good. When i switched to wifi, it was trying to get the ping test accomplished, and could not. it was stuck in the ping test at 0% for a long time and never progress.

Itunes is telling me i dont have internet when i try to update. help please

when i enter itunes everything works fine besides the option to update.
i go to update my iphone 4 on to 4.2.9 and then it says not connected to the internet. Restoring even says not connected.

could be configuration or date/time settings. double check your date, time and time zone (if this is wrong you will not be able to access the Apple update server). also go through the 'blocked by configuration' section of Apple support article TS3297: http://support.apple.com/kb/TS3297?viewlocale=en_US

How can I undelete, recover, or restore my web/browser history? HELP PLEASE PLEASE

I accidentally deleted my history and I did not write down the urls i visited and I need those sites for school. please please.

Once deleted the history is gone.<br />
You can try the browser cache.
Cache Viewer: https://addons.mozilla.org/firefox/addon/2489
There are other things that need attention.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.1 r53
# Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

Airport not working after Apple sw updates - HELP PLEASE!!!

I have a newish MAC Intel. The Airport was working fine for the last 9 months or so until I puled down Apples usual sw updates. I did them all incl the firmware update. Now the Airport wont hook up. I have wireless to NETGEAR router downstairs. I see network broadcasting as its sen in networks box, yet when I select it and then plug in a WEP and connect it says no can do and jumps back to no network selected. Ive tried this dzens and dozens of times. Lke I said was fine for last 9 months until updates last week...grrrhh.can anyon help me please?
thanks
./david
PS ot sure what OS I have..never checked to be honest
INTEL iMAC Mac OS X (10.4.8)

Hi David,
sunny in Scotland right now ?? (Sorry, just joking)
Have the same one and came to the conclusion that Airport doesn't wait for the DHCP from the Netgear to get a numer like 192.168.xxx.xxx but has already one which is not in the pool provided by the Netgear.
Since I'm depending on this I help myself by turning Airport off (in the Menu) wait 20 seconds and then turn it on again.
Helps every time.
Another guy round here has helped himself by turning off the Automatic (in the Airport preferences) and has entered all numbers manually.
Regards
Stefan

Blackberry lose's connection to pc during update help please.

need some help if you can please.
i have been trying all night to update my blackberry i have used blackberry destop manager from blackberrys website.
i have used http://www.blackberryforums.com/general-8900-series-discussion-javelin/231976-latest-os-8900-5-0-0-1... As i was advised by one of the user on here but no matter what i use and what i do my phone will lose connection to the pc i have used 2 different cables with same effect and have even used to different pc's.
does anyone heave any idea why this is and how i can fix it?
thanks for any help.

While updating to the latest software upgrade, I
believe I unplugged the Nano too soon. As a result,
I have not been able to access the Nano via the
updater to reset the iPod, get it into disk mode, or
get iTunes to recognize it. The iPod boots and will
ask for a language each time. I then get the songs
menu and all songs are gone. I'm guessing corrupted
the disk because updater won't initialize The
computer recognizes the iPod as drive H, so I don't
believe it's connection-related. Thanks for your help
Hello,
I had more or less the same problem when updating to 1.1.1 my daughter's 2GB nano (the same operation with my 4GB was completely OK). I was in despair, when eventually found the solution in this forum (by the way, I think it's a bug, but your own fault...):
1) connect the nano to the computer, then close iTunes or any other program trying to access it.
2) through Explorer, click on the "external unformatted disk" (or something like that) which corresponds to the nano (drive H, you said);
3) right click (and be patient, it may take a bit), then select "Format" (don't select 'low level formatting') and run it. It will take a bit, but in my case at the end of the formatting iTunes automatically started and recognized the iPod, and everything was OK.
Of course, the music previously stored was lost.
Hope it helps,
Ivan
Asus Notebook Windows XP

Internet/browser/automatic updates help please

Similar Messages

Maybe you are looking for