Internet browser slow after 10.6.8 update - it is not the connection

I have just updated to OSX 10.6.8. After that Safari and Chrome seams to be very slow to access all kind of address. The network connection is ok and emails are coming at normal speed in outlook for Mac. Using speedtest.net I got a download rate of 11 Mbps but the pages seams to load very slower then before. Any Ideas on how to solve it? I have a mbp 13" 8Gb core i7

Have my early2009 iMac connected wirelessly to my
Airport Extreme and am having no slowdown in any internet
access with 10.6.8. Service provider Comcast.
On my Mac, I have Configure IPv6 set to automatic.
I also have my Airport Extreme set up as the DNS server
for the network and allow it to receive the DNS from the ISP.
The Extreme is also the DHCP server.
On the extreme, wireless setup is:
   Radio mode: automatic
   Radio Channel selection: automatic
   Wireless security: WPA2 Personal
guest access is disabled.
The extreme is configured via DHCP from the
ISP through the cable modem.
Also IPv6 is set to link-local only.
Not sure if any of this information will be of help,
but at least with my set up there doesn't seem to be
any issue.
PS. Also, my 2011 13" BP i7 is also at 10.6.8 and am
having no internet speed issues over wireless.

Similar Messages

HT5730 After I installed 10.8.48.4 Internet browsing slowed down to the pace of a dial-up connection. How can I get back to normal operating speed?

After I installed 10.8.4, my Internet browsing slowed down to the pace of a dial-up connection -- unless it froze up completely. How do I get my system back to a normal operating mode? Can I dump 10.8.4 and go back to the one that at least worked?

Please answer as many of the following questions as you can. You may already have answered some of them.
1. Have you restarted your router and broadband modem since you first noticed the problem? If the answer is no, do that now and see whether there's any change.
2. Are any other web browsers installed, and are they also slow?
3. What about other Internet applications, such as iTunes and the App Store?
4. Are there any other devices on the same network that can browse the Web, and are they also slow?
5. If you can test Safari on another network, is it slow there too?
6. If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
Thanks in adavnce for help.

Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
"Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

I'm using iPhone 4S and it was working fast once I purchased and after few months I update my phone since to 7.0.1 since then neither my wifi is working nor my Bluetooth and even my phone is working slow, after than many new updates came I did but nothing

I'm using iPhone 4S and it was working fast once I purchased and after few months I update my phone since to 7.0.1 since then neither my wifi is working nor my Bluetooth and even my phone is working slow, after than many new updates came I did but nothing works. Kindly help me out how to solve this problem.

Hi Sameer alamgir!
Here are two articles that can help you troubleshoot these issues with your Wi-Fi and Bluetooth connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Take care, and thanks for visiting the Apple Support Communities.
-Braden

After doing a widows update itunes will not work at all

after doing a widows update itunes will not work at all

hiya!
I get the itunes has encounterd a problem and needs to close, sorry for the inconvenience error, no specific error number. I do not have QT installed,
not having QT installed is what will be causing your itunes error message at the moment. let's try a careful standalone QT 7.1 install.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

HT201263 I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes sc

I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes screen on. It won't go away and I have tried restarting and turning off my phone various ways various times. I don't know what to do!

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download

After doing last Mavericks update, Messages is not working properly

Since yesterday, after doing last Mavericks update, Messages is not working properly - the Dock icon is not bouncing nor showing any number for new messages. Very annoying, since I usually have Messages on background while working and I now i don't realize if people is chatting me unless I open the messages wondows.

Hi,
Check System Preferences > Notification is set for Messages
In Messages > Preferences > General Section change the Sound option for Message Received.
Restart the app and test this sound is (still) playing.
Place app in background an iMessages "yourself" form your iPhone.
Does the sound Play ?
10:18 pm Wednesday; November 13, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.

Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.

UN-successful Windows Update Log:
2014-05-07 09:33:56:180
1036 e70
Misc =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-07 09:33:56:220
1036 e70
Misc = Process: C:\Windows\system32\svchost.exe
2014-05-07 09:33:56:221
1036 e70
Misc = Module: c:\windows\system32\wuaueng.dll
2014-05-07 09:33:56:180
1036 e70
Service *************
2014-05-07 09:33:56:221
1036 e70
Service ** START ** Service: Service startup
2014-05-07 09:33:56:222
1036 e70
Service *********
2014-05-07 09:33:56:544
1036 e70
Agent * WU client version 7.6.7600.256
2014-05-07 09:33:56:545
1036 e70
Agent * Base directory: C:\Windows\SoftwareDistribution
2014-05-07 09:33:56:546
1036 e70
Agent * Access type: No proxy
2014-05-07 09:33:56:547
1036 e70
Agent * Network state: Connected
2014-05-07 09:33:57:315
1036 e70
Setup Service restarting after SelfUpdate
2014-05-07 09:33:57:545
1036 e70
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:33:57:592
1036 e70
Report CWERReporter::Init succeeded
2014-05-07 09:33:58:326
1036 e70
Report *********** Report: Initializing static reporting data ***********
2014-05-07 09:33:58:376
1036 e70
Report * OS Version = 6.1.7601.1.0.65792
2014-05-07 09:33:58:376
1036 e70
Report * OS Product Type = 0x00000030
2014-05-07 09:33:58:394
1036 e70
Report * Computer Brand = Hewlett-Packard
2014-05-07 09:33:58:444
1036 e70
Report * Computer Model = HP Compaq 4000 Pro SFF PC
2014-05-07 09:33:58:455
1036 e70
Report * Bios Revision = 786H7 v02.00
2014-05-07 09:33:58:504
1036 e70
Report * Bios Name = Default System BIOS
2014-05-07 09:33:58:554
1036 e70
Report * Bios Release Date = 2011-01-31T00:00:00
2014-05-07 09:33:58:554
1036 e70
Report * Locale ID = 1033
2014-05-07 09:34:03:562
1036 f08
Report REPORT EVENT: {082D455B-6E51-4238-A997-1D27D9214A72}
2014-05-07 09:33:58:565-0400 1
199 101
{0011B9ED-9189-4D58-BE25-FA2F13FC3D6C}
1 240005
SelfUpdate Success
Content Install Installation successful and restart required for the following update: Windows Update Aux
2014-05-07 09:34:03:614
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing Windows Update Agent ***********
2014-05-07 09:34:42:049
1036 e70
Agent *********** Agent: Initializing global settings cache ***********
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * WSUS status server: http://csd26.csd.local:80
2014-05-07 09:34:42:049
1036 e70
Agent * Target group: CO
2014-05-07 09:34:42:049
1036 e70
Agent * Windows Update access disabled: No
2014-05-07 09:34:42:063
1036 e70
DnldMgr Download manager restoring 0 downloads
2014-05-07 09:34:42:089
1036 e70
AU ########### AU: Initializing Automatic Updates ###########
2014-05-07 09:34:42:089
1036 e70
AU AU setting next detection timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU AU setting next sqm report timeout to 2014-05-07 13:34:42
2014-05-07 09:34:42:090
1036 e70
AU # WSUS server: http://csd26.csd.local:80
2014-05-07 09:34:42:090
1036 e70
AU # Detection frequency: 22
2014-05-07 09:34:42:090
1036 e70
AU # Target group: CO
2014-05-07 09:34:42:090
1036 e70
AU # Approval type: Scheduled (Policy)
2014-05-07 09:34:42:090
1036 e70
AU # Scheduled install day/time: Every day at 3:00
2014-05-07 09:34:42:090
1036 e70
AU # Auto-install minor updates: Yes (User preference)
2014-05-07 09:34:42:105
1036 e70
AU Initializing featured updates
2014-05-07 09:34:42:116
1036 e70
AU Found 0 cached featured updates
2014-05-07 09:34:42:116
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:34:42:117
1036 e70
AU AU finished delayed initialization
2014-05-07 09:34:42:117
1036 e70
AU AU setting next sqm report timeout to 2014-05-08 13:34:42
2014-05-07 09:34:42:117
1036 e70
AU #############
2014-05-07 09:34:42:117
1036 e70
AU ## START ## AU: Search for updates
2014-05-07 09:34:42:117
1036 e70
AU #########
2014-05-07 09:34:42:291
1036 e70
AU <<## SUBMITTED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:34:42:341
1036 f08
Agent *************
2014-05-07 09:34:42:341
1036 f08
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:34:42:341
1036 f08
Agent *********
2014-05-07 09:34:42:341
1036 f08
Agent * Online = Yes; Ignore download priority = No
2014-05-07 09:34:42:341
1036 f08
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-05-07 09:34:42:341
1036 f08
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-05-07 09:34:42:341
1036 f08
Agent * Search Scope = {Machine}
2014-05-07 09:34:42:341
1036 f08
Setup Checking for agent SelfUpdate
2014-05-07 09:34:42:342
1036 f08
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-05-07 09:34:42:349
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:42:392
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:669
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-05-07 09:34:44:676
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:754
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:777
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:781
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-05-07 09:34:44:788
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:837
1036 f08
Setup Determining whether a new setup handler needs to be downloaded
2014-05-07 09:34:44:855
1036 f08
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2014-05-07 09:34:44:862
1036 f08
Misc Microsoft signed: Yes
2014-05-07 09:34:44:862
1036 f08
Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe are not trusted: Error 0x800b0001
2014-05-07 09:34:44:862
1036 f08
Setup WARNING: Trust verification failed for WuSetupV.exe. It will be deleted and downloaded, error = 0x800B0001
2014-05-07 09:34:44:863
1036 f08
Setup SelfUpdate handler update required: Current version: 7.6.7600.256, required version: 7.6.7600.256
2014-05-07 09:34:44:873
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:44:932
1036 f08
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:44:933
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:048
1036 f08
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:048
1036 f08
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
2014-05-07 09:34:45:234
1036 f08
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
2014-05-07 09:34:45:235
1036 f08
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-05-07 09:34:48:415
1036 f08
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-05-07 09:34:48:415
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:34:48:424
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:424
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:424
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:34:48:454
1036 f08
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2014-05-07 09:34:48:454
1036 f08
PT WARNING: SOAP Fault: 0x00012c
2014-05-07 09:34:48:454
1036 f08
PT WARNING: faultstring:Fault occurred
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ErrorCode:ConfigChanged(2)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Message:(null)
2014-05-07 09:34:48:454
1036 f08
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2014-05-07 09:34:48:454
1036 f08
PT WARNING: ID:cb5babad-3a1d-4e6b-946e-736ed4746e3f
2014-05-07 09:34:48:464
1036 f08
PT WARNING: Cached cookie has expired or new PID is available
2014-05-07 09:34:48:464
1036 f08
PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
2014-05-07 09:34:48:464
1036 f08
PT Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
2014-05-07 09:35:06:497
1036 e70
AU Forced install timer expired for scheduled install
2014-05-07 09:35:06:497
1036 e70
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-05-07 09:35:06:497
1036 e70
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:06:498
1036 e70
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:14:236
1036 f08
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2014-05-07 09:35:14:236
1036 f08
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
2014-05-07 09:35:20:118
1036 f08
Agent * Found 0 updates and 79 categories in search; evaluated appl. rules of 859 out of 1494 deployed entities
2014-05-07 09:35:20:194
1036 f08
Agent *********
2014-05-07 09:35:20:194
1036 f08
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-05-07 09:35:20:194
1036 f08
Agent *************
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:35:20:209
1036 bb8
AU >>## RESUMED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU # 0 updates detected
2014-05-07 09:35:20:209
1036 bb8
AU #########
2014-05-07 09:35:20:209
1036 bb8
AU ## END ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
2014-05-07 09:35:20:209
1036 bb8
AU #############
2014-05-07 09:35:20:210
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:210
1036 bb8
AU Featured notifications is disabled.
2014-05-07 09:35:20:211
1036 bb8
AU AU setting next detection timeout to 2014-05-08 11:19:46
2014-05-07 09:35:20:211
1036 bb8
AU Setting AU scheduled install time to 2014-05-08 07:00:00
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:20:212
1036 bb8
AU Successfully wrote event for AU health state:0
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {C1B39107-F517-4477-AAE3-9B1F1D6002BF}
2014-05-07 09:35:20:193-0400 1
147 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Software Synchronization
Windows Update Client successfully detected 0 updates.
2014-05-07 09:35:25:183
1036 f08
Report REPORT EVENT: {669B9537-BB71-4190-BA58-A97F725AE4D8}
2014-05-07 09:35:20:194-0400 1
156 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Pre-Deployment Check
Reporting client status.
2014-05-07 09:35:25:184
1036 f08
Report CWERReporter finishing event handling. (00000000)
2014-05-07 09:37:32:440
1036 f08
Report Uploading 3 events using cached cookie, reporting URL = http://csd26.csd.local:80/ReportingWebService/ReportingWebService.asmx
2014-05-07 09:37:32:454
1036 f08
Report Reporter successfully uploaded 3 events.

HT1369 with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

with the last update I can not longer connect my iphones to iTunes - Is there an update to fix this?

Hello wendellfromva,
The following article provides tips that can help get your iPhone to reappear in iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen

Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resol

Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resolve the problem, because each update only worsens the operation. I look forward to a quick, effective and definitive solution. Thank You. Ester

Did all the updates that Apple requested in my 64 GB IPOD and the battery continues discharging very quickly. When this problem will be solved, because before these updates were downloading not the battery so quickly. Did we revive the Steve Jobs to resolve the problem, because each update only worsens the operation. I look forward to a quick, effective and definitive solution. Thank You. Ester

Very slow browsing speeds after 10.4.6 update

after updating to 10.4.6 Firefox, Safari are so slow compared to previous browsing speeds on a cable modem.
Speed has slowed from better than T1 to low DSL.
have run Cocktail, cron scripts, light cache cleaning etc,
DiskWarrior says all is good...
Disk Utility says all is good...
permissions are good....
TechTool reports, "A Fragment Length is Invalid" - MainAutomation_carbon.8li
this is the only problem found.
Would this be the cause of the slow down?
If so, can I delete this file,, would a new one be created?
or what can repair this file?
If the above is not the cause of the slow down, any
suggestions on solving this problem would be greatly appreciated.
dual 1.8 G5 Rev A Mac OS X (10.4.6)

Have you created a new account and named it "test" to see how your browsers work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
Let us know and we'll troubleshoot this further.
-mj
[email protected]

Internet browsing slow

My internet browsing is slow.
Using:
MacBook Pro
Retina, 13-inch, Late 2013
Processor 2.4 GHz Intel Core i5
Memory 16 GB 1600 MHz DDR3
Software OS X 10.9.5 (13F34)
Just run a internet speed test (all tests has run several times to account for one run that were not a good sample)
On my macbook (the one with problems. Done before reboot): download 7.5 Mbps / Upload 3.1 Mbps (wireless)
On my macbook (the one with problems. Done after reboot): download 22 Mbps / Upload 9.6 Mbps (wireless)
I must add that before the upgrade of my internet connection (running then at 50 Mbps) my new macbook speed was 49 Mbps to donwload (that was several months ago)
On another old macbook pro (about 6 years old): download 35 Mbps / Upload 9.5 Mbps (wireless)
On another old macbook pro (about 6 years old): download 73.1 Mbps / Upload 9.6 Mbps (ethernet cable)
iPhone 5: download 22.3 Mbps / Upload 10 Mbps
iPad Air: download 19 Mbps / Upload 10 Mbps
Test on my new macbook run on Safari and Chrome with similar results.
I think it is proved there is a problem.
I do not run any security software in my new mackbook
One month ago I notice that my browser was taking long time to load a page and sort of fixed cleaning caches and other parts of the system
See below the paste of the output of a script that I got from some other thread with a similar problem. I am happy to disable software step by step if you think relevant as otherwise my next step is going to be a fresh installation of the OS
Start time: 11:14:44 09/30/14
Model Identifier: MacBookPro11,1
System Version: OS X 10.9.5 (13F34)
Kernel Version: Darwin 13.4.0
Time since boot: 5 minutes
Diagnostic reports
   2014-09-10 com.apple.WebKit.WebContent crash
   2014-09-10 mds_stores crash
   2014-09-14 mds_stores crash
   2014-09-15 mds_stores crash x2
   2014-09-15 mdworker32 crash
   2014-09-16 mds_stores crash
   2014-09-19 Preview hang
   2014-09-23 com.apple.WebKit.WebContent crash
Log
   Sep 27 01:02:48 wl0: Roamed or switched channel, reason #2, bssid a4
   Sep 27 02:44:06 wl0: Roamed or switched channel, reason #2, bssid a4
   Sep 27 03:00:47 IOPPF: Sent cpu-plimit-notification last value 1 (rounded time weighted average 1)
   Sep 27 04:00:50 wl0: Roamed or switched channel, reason #2, bssid a4
   Sep 27 05:01:35 wl0: Roamed or switched channel, reason #2, bssid a4
   Sep 27 06:02:20 wl0: Roamed or switched channel, reason #2, bssid a4
   Sep 27 07:03:05 wl0: Roamed or switched channel, reason #2, bssid a4
   Sep 27 07:17:48 wl0: Roamed or switched channel, reason #4, bssid a4
   Sep 28 06:16:42 process VirtualBoxVM[986] caught causing excessive wakeups. Observed wakeups rate (per sec): 164; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 5696380
   Sep 28 15:33:12 [IOBluetoothHCIController][EnqueueRequestForController] -- SendHCIRequestToTransport failed, error (0xE00002D8) -- kIOReturnNotReady
   Sep 28 15:33:12 [SendHCIRequestFormatted] ### ERROR: EnqueueRequestForController failed (err=0xe00002d8 (kIOReturnNotReady)) for opCode 0x0c3f (Set AFH Host Channel Classification)
   Sep 28 16:32:17 wl0: Roamed or switched channel, reason #8, bssid a4
   Sep 28 16:43:08 ARPT: 34097.547443: directed SSID scan fail
   Sep 28 20:56:12 wl0: Roamed or switched channel, reason #8, bssid 00
   Sep 29 09:06:52 wl0: Roamed or switched channel, reason #4, bssid 00
   Sep 29 09:07:42 ARPT: 55167.645593: MacAuthEvent en0   Auth result for: 00 Auth timed out
   Sep 29 09:07:45 ARPT: 55170.363798: directed SSID scan fail
   Sep 29 09:11:22 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
   Sep 29 09:11:34 SIOCPROTODETACH_IN6: utun0 error=6
   Sep 29 16:31:08 wl0: Roamed or switched channel, reason #8, bssid 00
   Sep 29 23:21:37 process acwebsecagent[261] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
   Sep 30 10:07:43 wl0: Roamed or switched channel, reason #8, bssid 00
   Sep 30 11:06:51 process VirtualBoxVM[6829] caught causing excessive wakeups. Observed wakeups rate (per sec): 548; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 49842
   Sep 30 11:09:22 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
   Sep 30 11:09:34 SIOCPROTODETACH_IN6: utun0 error=6
kexts
   org.virtualbox.kext.VBoxDrv (4.3.10)
   org.virtualbox.kext.VBoxUSB (4.3.10)
   org.virtualbox.kext.VBoxNetFlt (4.3.10)
   org.virtualbox.kext.VBoxNetAdp (4.3.10)
   com.cisco.kext.acsock (1.1.0)
Daemons
   com.oracle.java.Helper-Tool
   com.microsoft.office.licensing.helper
   com.google.keystone.daemon
   com.cisco.anyconnect.vpnagentd
Agents
   com.dayoneapp.dayone-agent
   com.apple.photostream-agent
   com.evernote.EvernoteHelper
   com.oracle.java.Java-Updater
   com.google.keystone.system.agent
   com.cisco.anyconnect.gui
launchd
   /Library/LaunchAgents/com.cisco.anyconnect.gui.plist
   - com.cisco.anyconnect.gui
   /Library/LaunchAgents/com.google.keystone.agent.plist
   - com.google.keystone.system.agent
   /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
   - com.oracle.java.Java-Updater
   /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist
   - com.cisco.anyconnect.vpnagentd
   /Library/LaunchDaemons/com.google.keystone.daemon.plist
   - com.google.keystone.daemon
   /Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
   - com.microsoft.office.licensing.helper
   /Library/LaunchDaemons/com.oracle.java.Helper-Tool.plist
   - com.oracle.java.Helper-Tool
   /Library/LaunchDaemons/org.virtualbox.startup.plist
   - org.virtualbox.startup
   Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist
   - org.virtualbox.vboxwebsvc
Startup items
   /System/Library/StartupItems/ciscod/ciscod
   /System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
   /System/Library/Extensions/acsock.kext
   - com.cisco.kext.acsock
   /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
   - com.google.googletalkbrowserplugin
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
   - com.oracle.java.JavaAppletPlugin
   /Library/Internet Plug-Ins/MeetingJoinPlugin.plugin
   - com.microsoft.communicator.meetingjoinplugin
   /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
   - com.google.o1dbrowserplugin
   /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
   - com.microsoft.sharepoint.browserplugin
   /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
   - com.microsoft.sharepoint.webkitplugin
   /Library/PreferencePanes/JavaControlPanel.prefPane
   - com.oracle.java.JavaControlPanel
Apps
   /Applications/Dropbox.app
   /Applications/Google Drive.app
Contents of /System/Library/LaunchDaemons/com.apple.rpmuxd.plist (Apple binary property list)
   bplist00”      \MachServices_ ProgramArgumentsULabel— _ com.apple.rpmuxd ° _ /usr/libexec/rpmuxd   /58KLN
Font issues: 21
DNS: 80.58.61.250
Wi-Fi
   link auth: wpa-psk
User login items
   ChronoSyncBackgrounder
   - /Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app
   iTunesHelper
   - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
   Dropbox
   - /Applications/Dropbox.app
   Google Drive
   - /Applications/Google Drive.app
   Google Chrome
   - /Applications/Google Chrome.app
   Typing Speed Gauge
   - /Applications/Mavis Beacon Teaches Typing UK.app/Contents/Resources/Typing Speed Gauge.app
Restricted files: 179
Elapsed time (s): 243

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

System gets Slow after 10.6.5 update

So, I just updated it using standalone combo installer and straight away notice that to repair the disc permitions now takes 3 mins, before it took only 1min. even if there is nothing to repair. and futher more my whole system gets very slow after a few hours of using safari, skype, vuze, together and wasn't able to shut down just after using safari alone, had to press the power. havent been using anything else for so long so dont know how about it, but it seems to be ok. ah, im using airport to get to the internet if that's important.

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information.

Running slow after downloading a mandatory update

running slow after downloading an update!
I had zero complaints until today when I downloaded an update and restarted my machine.
Now It feels like I'm back in the PC world.
Any suggestions?

If it is Safari loading web pages slowly, I would suggest http://support.apple.com/kb/ts3230 or http://support.apple.com/kb/TS1594, one of these will surely help. If not, as previously suggested, more detail will greatly help.

Network slow after 10.4.5 update

Hi there, after installing the 10.4.5 update my PowerBook 12" is really slow when accessing network services. Web, Mail are impossibly slow.
I have a cable modem broadband connection with a Belkin wireless router sharing the connection. The laptop connects via Airport and uses DHCP for autoconfiguration.
I have tried the fix suggested on MacFixit of putting the DNS manually in the TCP/IP settings. Also I have turned off IPv6 which was also suggested to no avail.
My other laptops with earlier system revisions are running fine (I am using one to write this) and I have tried the Mac on another network with the same effect so it has to be something that 10.4.5 has done to my poor alubook
Can anyone help please.
PowerBook 12" 867Mhz 1.12GB RAM Mac OS X (10.4.5)

This was offered by MacFixit: Friday, February 24 2006 @ 09:30 AM PST
Mac OS X 10.4.5 (#9): Another fix for network slowness -- re-applying the combo updater; SIIG FireWire card not working; more
Another fix for network slowness -- re-applying the combo updater Over the past few days we've outlined a number of fixes for network slowness that occurs after the update to Mac OS X 10.4.5, including entry of a DNS address, toggling of IPv6 and more.
We've now received notes indicating that a tried and true workaround for various issues -- re-applying the Mac OS X 10.4.5 combo updater (as noted in our general workarounds for 10.4.5) -- can have beneficial effects in this case as well.
MacFixIt reader Fred Moore writes:
"After much thrashing about and wasted time, I appear to have solved both the slow web page loading as well as my email sending problems in one stroke. Guess how: download the Mac OS X 10.4.5 combo updater and reapply it. This nonsense has cost me a lot of time but everything seems to work now. IPv6 is set back to Automatic, there is no entry in the Network prefs DNS server field, and my email sending works perfectly (so far; I've sent a bunch of tests). Why didn't I just download the combo updater and apply from my hard drive at the beginning? Well, Software Update should (yes, I know, I know...) work. I'll never again use Software Update for a system update."

Internet browser slow after 10.6.8 update - it is not the connection

Similar Messages

Maybe you are looking for