Internet browser to scrol and change the height of my stage.

hello. I'll try to write to my question.
My stage is 1024 * 768 I have put there ScrollPane that loads my_mc,
my_mc exchange his height. Example http://www.4x4nz.sk/home_page_1.html.
this is ok.
but I try to insert my_mc without ScrollPane. and here is my problem.
my_mc can have more than 768 height.
so I need to force internet browser to scrol
and change the height of my stage.
example http://www.4x4nz.sk/home_page_2.html

Now there is a scroll, but it does not work. not see the whole my_mc
http://www.4x4nz.sk/home_page_2.html

Similar Messages

How to change the height and width of a control?

Dear all,
is there anyway to change the height and width of a control?
In the property nodes, i am just able to read the bound values but cudnt write to it.
How can i set the bound values for a control?
Thanks,
Ritesh

Not all controls can be sized this way. For example to change the vertical size of a simple numeric, you would need to change the font size.
LabVIEW Champion . Do more with less code and in less time .

Dynamically changing the height and width of Stage

Hi,
          I would like to know how can I change the height and width of stage dynamically. I tried it with the following code:
                         Stage.height = 250;
                         Stage.width = 250;
during the run time. Initially the Stage is at a height and width of 370 and 450 respectively. Also when I tried to trace the height and width of Stage after resizing the stage width and height, its showing the old value of width and height. That means the width and height not chnaging. Anybody have any idea about this.

Hi Ross,
            I could understand something about the problem after making a research on this topic. We can't change the width and height of stage from actionscript itself, right? I will explain the way I am planning to do. I don't know whether its right or not. Anyway you just go through it. First the player need to be resized, according to the specified height and width. Then in the object tag, there are two fields named height and width. We should change these value according to the specified height and width of video controller, dynamically. Am I right? But I am confused with two properties of Stage such as: align and scaleMode. The code was actually developed my trainer. There, the scaleMode is set to "noScale" and no align property is used. My doubt is how should I set align and scaleMode properties of Stage. Hope you understood what I meant.
Regards,
      Sreelash.S.

How can I manually change the height of the "Type ...

Hi all
Just got automatically installed the latest 6.22 version of skype few minutes ago and I got a few questions.
First and foremost, how can I MANUALLY change the height of the textbox, where I type the messages. I would like to make it larger, like in the previous versions of skype. I don't want to move my mouse cursor through the entire monitor to reach this tiny textbox.
And second, why you guys are trying constanly to ruin something that is working perfectly ? Going to revert to the previous version until you fix all these nuisances.
Regards

There is no way to do this, it is designed to be strictly landscape with keyboard, portrait without - not the best thought-out phone on the market, mainly geared towards compulsive texters and e-mailers.
There's no way to know whetherNokia will change this with any future updates, perhaps you should make the recommendation to them directly using the 'contact us' link.

My ipod nano isn't syncing when I try and change the setting in manually, but is however syncing when I launch the itunes by plugging it in. I'm wondering if anyone has had this issue and/or had been able to fix the problem?

My ipod nano isn't syncing when I try and change the setting in manually, but is however syncing when I launch the itunes by plugging it in. I'm wondering if anyone has had this issue and/or had been able to fix the problem?

Do you have any better luck with that if you update to iTunes 10.6.1.7?
From the notes for the release:
iTunes 10.6.1 provides a number of improvements, including:
• Fixes several issues that may cause iTunes to unexpectedly quit while playing videos, changing artwork size in Grid view and syncing photos to devices.
• Addresses an issue where some iTunes interface elements are incorrectly described by VoiceOver and WindowEyes.
• Fixes a problem where iTunes may become unresponsive while syncing iPod nano or iPod shuffle.
• Resolves an ordering problem while browsing TV episodes in your iTunes library on Apple TV.
http://www.apple.com/itunes/download/

I need to change the height of a Captivate playbar using Flash Pro

I need to change the height of a playbar in Adobe Captivate. I have Flash Pro. I am very new to Flash Pro. I read.. "To change the height of the playbar, adjust the height of pbcBk_mc movie clip inside cpPlaybar symbol in Library". The problem is I CAN'T FIND pbcBk_mc anywhere. I see the cpPlaybar attrbute. When I click on it and look at the timeline I am not seeing an attribute for pbcBk_mc or height. Where in the world is it??

You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
You master the "static" content..
You keep this authoring file and have a backup of this file.
You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
The authoring file and output PDF (with form fields) gives you "rev 00".
Now, you must change something in the "static" content.
Open the authoring file and save as to a new version (e.g., "wordfile_v00" becomes "wordfile_v01).
Output this to "pdffile_v01".
Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
This replaces the "static" PDF page content and does not affect the form fields on the page.
(you may have to adjust position of form fields)
Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
Be well...

How to change the height of the advanced paragraph window in WPC?

Hello,
I would like to have a bigger window when I work with the advanced paragraph in WPC in order to see better the content.
It´s ok if I see at the beginning the default size. However, I need the posibility to maximize the height of the window to a predefinded maximum height.
It´s maybe possible to give an extra property for like MaxHeight="500" in the xml-File?
<element id="paragraph_advanced" description="xml.xlbl.paragraph_advanced" type="htmleditadvanced" Maxheight="500" default="false" />
Does anybody have experience with it.
Thanks in advance.
Thomas

Hi Thomas...
Did you have success changing the paragraph height?
I'm with the same problem.
I had another idea to solve it. If I couldn't change the height, i'll create my own web form (based on article form), only with paragraph field.
I've tested this option and worked. But I prefer to use the standard web form.
Tks

How to get rid of Yahoo which has replaced itself as the search engine on safari . I have tried going to safari and changing the default search engine to google and the homepage to no avail can anyone PLEASE help

After updating Firefox . I notice Yahoo has taken over as the search engine on safari . I have gone into safari and changed the default browser and home page to google but yahoo is still there . Can someone Please tell me how to get rid of Yahoo . peter

Since I looked everywhere for this answer and never found it I decided I needed to help!
1. GO TO THE TOOL BAR WHERE IT SAYS SAFARI AND CLICK TO BRING DOWN THE MENU OF OPTIONS, CLICK ON PREFERENCES
2.INSTEAD OF JUST CLICKING ON THE GENERAL TAB AND CHANGING THE SEARCH ENGINE LIKE EVERY OTHER STUPID SUPPORT TELLS YOU TO DO LOOK AT THE TAB THAT SAYS EXTENSIONS.
3. Chances are you downloaded something that was made by a third party to "enhance" your web experience but really they just screwed you over, YOU CAN CHOOSE TO SIMPLY UNINSTALL ANY EXTENSIONS PUT ON YOUR COMPUTER BY CLICKING INSTALL, BUT TO BE SURE THAT THIS IS THE ROOT OF YOUR PROBLEM IN THE SECOND COLUMN SIMPLY CLICK ON THE UNDERLINED NAME OF WHO THE EXTENSION IS MADE BY IF CLICKING THE LINK BRINGS UP A YAHOO PAGE THIS IS THE SOURCE OF YOUR ISSUES AND SIMPLY UNINSTALLING THIS WILL RID YOU OF THIS DUMB PROBLEM!!
HOPE THIS HELPS!!!!

Financial Reporting 9.3.1 automatically change the height of the row

How can I make the reports generator automatically change the height of the row if the text does not fit into the cell? I tried different PDF generators (AFPL Ghostscript 8.51, Adobe Acrobat Distiller 6.0) but result was the same: http://sql.ru/forum/actualfile.aspx?id=6396177

Hi,
In HFR if you are not allowing expansion on the row or column, it wont expand itself according text length.
So you need to anticipate the row hight and width according to your need. You can define this in the property sheet.
Thanks,
aly

To change the height of row of a table

hi Experts,
1) Can any one please help me to change the height of row of a table
2) If i need to display data intable in such a way that data would be displayed in every alternate row, keeping one row empty.
Points wil be rewarded to helpful answers,
Regards,
Sanjyoti.

hi Jarrod,
i want to make a display iview where the data comes from a table, add image beside each data from the table,
1) if i display data in table i am not able to add image beside each row.
2)i have also tried using one form and one table displayed side by side where the table has data from data service and form has the images (static), but here again as the height of row can not be changed the image does not fit perfectly beside the rows.
I have not worked in VC before, so dont know wat exactly cant be done,
hope you will guide if you have any idea wat could be done
I got the help given below but not able to understand the flow of what is done
First create a button to trigger an action (let's say the action is called "go").
Drag a line and create a signal out set go as the event, name the signal out as "sig".
Create 4 numeric fields in the signal out "num1",..,"num4".
Map num1 <- 1
Add a signal in to the model, name it "sig" and create 4 numeric field to it ("num1",..,"num4" as well).
Drag a line from the signal in and choose a form from the context menu.
4 recordsl will appear in the form. set them as visible and as spinner control.
drag a line from the form's out port and add a signal out named "go".
Map is as follows:
num1 <= @num1+1
num2 <= 1
num3 <= if(@num2==1,1,0)
num4 <= if@num3==1,1,0)
Add a gaurd condition to the line @num1<4 and name the event "Next_Event"
double click on num1 to open the properties popup.
For num1 define a custom action named "Next_Event"
For num2 define a custom action named "Pass1"
For num3 define a system action move row - move next
For num4 define a custom action named "pass2"
drag a line from the form and add data store. Create 2 field in it "first" and "second"
set the event to be pass1 and map the value you want from the table to "first".
Create another line from the form to the data store with event pass 2 that maps value to second.
Create a new form with 2 field which default vlaue is the value in the data store.
Points would be awarded to helpful answers.
Regards,
Sanjyoti.

How to change the height of the column header cells

Hi,
I have been working with Oracle BI Discoverer 10g. I want to increase the height of the column header cells. The labels within the column headers are almost cut off. Is there a way to change the height of the column header cells?
Thanks...

Hi
In dic.4.1 ,we are using format heading ,and manipulating by entering extra space and changing font and mode.
try the same
Rgds
NP

How can I change the height of the input box in a...

How can I change the height of the input box in a new version of Skype?
Solved!
Go to Solution.
Attachments:
Skype_input_box.png ‏4 KB

lucasbgme wrote:
I've tried 6.1.0.129
6.1.0.129 version is disabled. All Skype versions older than 6.14 are now retired and can no longer be used. You can try to install the 6.21.0.104 version:
http://download.skype.com/msi/SkypeSetup_6.21.0.104.msi

Changing the Height of Top Level Navigation

How do I change the height of the Top Level Navigation? I went into the framework page I am using, and then opened the Top Level Navigation iView, and changed the Fixed Height to "100" pixels while leaving the Height Type as "Fixed", but this had no affect.
I am using just one level of TLN, and trying to increase the height of that one level so it is easier to see in the page.
Thanks,
Owen

I have already downloaded the PAR file and customized it, and am using it in my custom portal framework. Which part of the code do you recommend I modify? There is the portalapp.xml file, which specifies the height as 45 pixels, but this is just the default size, which should be overridden by the value I specify in the iview, right?
As far as the theme editor, that doesn't help me. I have to increase the size of the top level navigation, not just change the font.
Thanks,
Owen

Thunderbird sometimes changes the height of the letter at will in the middle of a sentence when I'm writing an e-mail.

Thunderbird sometimes changes the height of the letter at will in the middle of a sentence when I'm writing an e-mail. How can I fix this?

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

How to resize and change the resolution of a batch of photos using Automator

I searched for a long time tonight looking for the answer to this (seemingly) simple question:
How do I use Automator to scale and change the resolution of a batch of images?
It was not so simple.
Links to this question:
https://discussions.apple.com/message/12341246#12341246
https://discussions.apple.com/message/12342026#12342026
https://discussions.apple.com/message/5785047#5785047
https://discussions.apple.com/message/1173358#1173358
https://discussions.apple.com/message/5641853#5641853
https://discussions.apple.com/message/3207516#3207516
These are just the links on this site - I found them all over the place at MacRumors, Apple Tips, Mac Help, etc.
You can actually manage this in Automator.
Here are the steps that worked for me:
Create an Automator APPLICATION - not a workflow (this is due to the way that I'm batch converting images - workflows might be ok for some cases)
Step 1 is Copy Finder Items
My flow inserts an SD card, opens the DCIM folder that my Nikon creates, selecting the images that I click (command + click to multi-select) and once I have the photos highlighted, I drag them onto this Automator App we're creating.
<== You'll have this guy soon!
As a result - I want to copy the originals to my computer as step 1. I don't touch the originals on the SD card (and cards are cheap so I tend to leave them on the cards as well)
Step 2 is the Scale Images action - you can search the library for this and find it quickly. For my part, I found that scaling images to about 38.8 percent of their size on the SD card is good for uploading to a blog. Change this value to whatever you wish.
Step 3 is Run Shell Script - and here is where we marry the brilliance found at this link with our script.If you have a hard time reading the text in the image, it is as follows:
#bin/bash
for f in "$@"
do
/usr/bin/sips -s dpiHeight 72.0 -s dpiWidth 72.0 $f
done
Save this application (I named mine "Format Photos")
Place the application inside the target folder where you want the images to end up. I do this because when I have the SD card window open, I can also open my "Photos" window and see my App sitting there. I select my images as I mentioned and drag them on top of this app. The app copies the originals and the conversions into the folder.
NOTES: When you open a converted pic in Preview, you will see Resolution = 300 dpi if you go to Tools --> Adjust Size... This reading is explained by another brilliant discussion as sips only touches the JFIF properties inside the file's MetaData. However, if you look at the bottom of the Adjust Size... window, you'll see the image size is probably around 500 kb (give or take depending on the original). My goal was to get the images down from the 3.0 MB I shoot at to around 500 kb. Therefore even though the MetaData still thinks that it is 300 DPI according to Preview, it has been changed to 72 (open it in some other applications mentioned at the links and you'll find different readings - it all depends on what the application reads from the Meta).
This does not rename the files, so you'll get DSC_1000.jpg and DSC_1000 copy.jpg in all likelihood. If that annoys you, add a step into the Automator Application that renames the file after the "Run Shell Script" action has run, and you can have each file renamed according to some convention that you like.
This took a heck of a lot longer than I expected - so I decided to put in the effort to share this with the community and save others the hassle.

PPI is pixels per inch of the image. It is difficult to increase resolution as you are trying to add data that is not there.
But for printing purposes what you want is dpi or dots per inch.
The image processor either accessed from Bridge (tools/photoshp) or PS is a good way to change a batch of images.

Internet browser to scrol and change the height of my stage.

Similar Messages

Maybe you are looking for