Internet Connect error - Max connect time
I am trying to help a friend with his Powerbook G4 at 10.4.4 configure dial-up networking with his internal modem.
When I click the "Connect" button in internet config it briefly shows a status of "Contacting PPP Server" then immediately presents a dialog box with the message "The connection was terminated because the maximum connection time has elapsed."
Although I have verbose logging checked in the ppp configuration in the ppp options of the network prefpane for the internal modem, Internet Config does not write anything to the log. The modem selected is "Apple Internal Modem (v90)". I have tried other modem selections with the same result.
I have tried dialing the modem with zTerm and that works. So, the problem does not appear to be originating with the modem.
What is causing the time out condition and how do I correct it?
Thanks
There was probably "maxconnect x" (with a numerical value for x) in either /etc/ppp/options or /etc/ppp/postoptions that was causing that -- unless there was a script that specifically called for maxconnect to be used as an option.
/usr/sbin/pppd is the executable that handles ppp connection. it's not a matter of Internet Connect being sensitive to it; that is what handles the actual ppp connection.
Similar Messages
-
Hp laserjet m1536dnf mfp. "Connection error Check connection".
i have hp laserjet m1536dnf mfp. when tried to enable eprint at the web services setup menu... i get "Connection error Check connection". Network and Internet connection works fine. Please help?
It seems like the Printer is having a hard time connecting to the ePrint server to get me the email address.
Thanks,
JohnHi,
My firmware is up todate.
I have tried all the recommended support steps... currently had the printer on manual IP. Still same connection error.
Product Name: HP LaserJet M1536dnf MFP Formatter Number: P932T2L Serial Number: CNC9C7WB2W Service ID: 21270 Firmware Date: 20110405 Disable Fax: No Telecom Version: 04-015-001 Location: USA ADF Installed: Yes Max Monochrome Print Quality: FastRes 1200 Controller Number: 52 Duplexer Version: 0 Device Description: HP LaserJet M1536dnf MFP Language: English Asset Number: 153 Company Name: Contact Person: Device Location: warehouse Product Security: Off Quiet Mode: Off
Hardware Address: 10:1f:74:46:4f:20 Host Name: NPI464F20 IPv4 Address: 10.0.1.112 Status Ready IPv4 Address: 10.0.1.112 Subnet Mask: 255.255.255.0 Default Gateway: 10.0.1.1 IP Configured By: Manual WINS Server: 0.0.0.0 Preferred DNS Address: 205.152.37.23 Alternate DNS Address: 205.152.150.23 Status: Connected Hardware Address: 10:1f:74:46:4f:20 Link Speed and Duplex Negotiation: Automatic
Link Speed: 100 Mbps Duplex: Full Auto Crossover: Enabled -
EM error: Fatal NI connect error 12537, connecting to: (LOCAL=NO)
When I start EM DB Console with "emctl start dbconsole" then following error occures every 10 seconds:
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 13-JUN-2012 15:41:53
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (24598) as a result of ORA-609
Wed Jun 13 15:42:03 2012Regards, Azer Imamaliyevnote: ORA-609 TNS-12537 and TNS-12547 in 11g Alert.log [ID 1116960.1] gives you a number of causes and possible solutions.
Eric -
Fatal NI connect error 12500, connecting to:
Version Information:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 03-Aug-2006 15:08:48
Tracining not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS erro code: 0
Anybody have any information on this error?I got the same problem as you did.
It was observed when I tried connect to APEX 2.2.1. Could anyone help with this issue? Thanks!
Please see the sqlnet.log information below:
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=techinfo02)(PORT=1521))(CONNECT_DATA=
(SERVICE_NAME=test01)(CID=(PROGRAM=F:\product\10.1.3\OracleAS_1\Apache\Apache\Apache.exe)
(HOST=XINTECHINFO02)(USER=SYSTEM))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.5.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.1.0.5.0 -
Production
Time: 26-OCT-2006 10:43:30
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0 -
Connection Error, cannot connect to game server
I Just updated to iOS 8.1. When I tried to play WordRoll I got an error message, Connection Error, Cannot connect to game server.
ave researched some answers and have tried several, log out then soft reset, delete app and reinstall, reset wireless, nothing seems to work.I'm not sure. Prior to last Wendesday our net connection was fine, but from Wednesday evening it's been decidedly flakey during the evenings
Oh & I'm using a HH2 & am on Total Broadband option 3. I've also tried the Leatrix Latency Fix (several months ago) & have turned off the router for several mins (on Thursday evening). I've been able to connect again to the servers this morning (as I did yesterday morning). Here's the pathping (sorry for it being an image, I can't work out how to copy & paste from the dos box & don't really want to copy it out), my HH's saying I'm getting 7,616kps down & 448 kps up, Speedtest.net's saying 6.34Mb/s down & 0.38Mb/s up (now). -
Can anyone tell me what I need to do in order to enable HP Web Services on HP LaserJet Pro M1536DNF model? Everything works fine and shows it's connected to the network but I cannot enable HP Web Services. It says "Connection error Check connection" I've tried restarting everything; network, printer, computer. I've also updated firmware to latest version as well.
Hi snapry,
Welcome to the HP Support forums. I understand that you are getting an unable to connect message when trying to enable the web services for your Laserjet CP1025nw printer.
Please set a manual IP address and manual DNS servers for the printer. The instructions can be found in the document Printer Does Not Maintain Wireless Connection. There is a Windows section and a Mac section. In the Windows section you will find the instructions in the sub-section titled “Solution three: Assign the printer a static IP address”. For Mac the applicable sub-section is titled “Solution two: Assign the printer a static IP address”. When entering the information for the Manual Preferred DNS server please use 8.8.8.8 and for the Alternate Preferred DNS server please use 8.8.4.4. These are Google’s DNS servers.
After setting the manual IP address and manual DNS servers, you should have no problems enabling the web services.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Error: Max processing time or Max records limit reached
Hi All,
While I run the report in Infoview, I get the below error:
Unable to retrieve object:
Max processing time or Max records limit reached
Kindly suggest me.
Thanks,
MeenaThere is a default limit on the number of records returned and on the time out of an 'idle' connection..These could be set in the CMC , however first try to check the query for that report and see if it is applying your record selection criteria at the database level ( use the Show Sql option and see if all your selection criteria have been turned into WHERE clauses)
- this will drastically reduces both the number of records returned to the Crystal and the time it takes for...
You can find setting here:
CMC>servers>page server>properties
Its always not recommended to set it to unlimited as page server is not a robust server, you need to schedule such reports that uses job server which is more robust.
Regards,
Parsa. -
DB connect error (MSSQL connectivity with SAP BI)- Urgent
Hi all,
I am trying to connect the MSSQL 2005 Database to the SAP BI system through RAC.During the creation of the source System(DB Connect) it placed an error as
DIA RSA1 BY G No shared library found for the database with ID SALMSSQL.
Can someone please let me know how we can comeup with this issue?Where we can download LIB_DBSL.SAR and the process to load it into theDIR_LIBRARY default path as we are using RAC connectivity.This is very important.Please suggest me
During the process of creation DB connect source system for MSS what we need to fill for the Connection Info option i.e System IP or the IP of Database and which Databasetable
DB Connection MSSQL
DBMS MSS
User Name sa
DB password /
Conn. info MSSQL_SERVER= ? MSSQL_DBNAME= ?
Connection Limit
Optimum Conns
Will reward points.
Thanks
DHello Dash,
Follow the below mentioned steps to create a dbconnect source system.
1. Goto RSA1 -> Source systems. Right click and Create
2. Give some name and description and hit enter
3. a. Con Name : Any name (SQLSRV, etc)
b. DBMS : MSS
c. UserName : Any username which is present in the SQL Server. Eg: SA.
If you have to use Windows Authentication, there is a seperate method :
For windows authentication, you will have to add your Admin login of BI Server to the SQL Server Security logins group (For Eg: If BI Server name is BID and the admin login for this server is BIDADM, you need to add BIDADM to Logins/Users group of SQL Server and also for the specific database).
d. Password : Anything.
e. Con Env : MSSQL_SERVER=<sql server name> MSSQL_DBNAME=<database name> OBJECT_SOURCE= DBO.
For Example:
MSSQL_SERVER=ps14apollo MSSQL_DBNAME=PROJECTSERVER_REPORTING OBJECT_SOURCE=DBO
Here ps14apollo is my SQL Server name. Similarly ProjectServer_Reporting is my database name. DBO should be the Object_Source for most of the SQL Server dbs. I think it should work in your case as well.
f. DB RECO = select or let it remain unselected.
g & h Max Connections & OPT Connections = 0, for unlimited connections.
Regards,
F-S -
Closed connection error when connection isn't being closed
Hi,
Currently I am trying to connect to an Oracle 11g database via JDBC. However, everytime I run the code I get the following error:
java.sql.SQLException: Closed Connection
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:439)
at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:653)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:338)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:490)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:133)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:53)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:474)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
The error comes from running the below code.
public static Connection connect(String url, String username, String password) {
Connection conn = null;
//String url = "";
// Load the driver
try {
Class.forName("oracle.jdbc.driver.OracleDriver");
} catch (ClassNotFoundException cnfe) {
System.err.println("Oracle driver class cannot be found");
cnfe.printStackTrace();
System.exit(1);
// Get the connection
try{
conn = DriverManager.getConnection(url, username, password); *// This is the offending line*
} catch (SQLException sqle) {
System.err.println("Problem connecting, possibly incorrect " +
"username/password or problem communicating with the database");
sqle.printStackTrace();
System.exit(1);
}java.sql.SQLException: Closed Connection
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:439)
at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:653)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:338)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:490)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:133)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:53)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:474)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
// Turn auto commit off
try{
conn.setAutoCommit(false);
} catch (SQLException sqle) {
System.err.println("java.sql.SQLException: Closed Connection // This is the offending line
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:439)
at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:653)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:338)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:490)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:133)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:53)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:474)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)Problem turning off auto commit");
sqle.printStackTrace();
System.exit(1);
return conn;
but the connection is never closed, this is the first time connect is called so it is never opened either.
// This is the offending line
The URL I am using to connect is:
jdbc:oracle:oci8:@mydatabase:1158
The database is stored on a server. I have previously tested the code on a machine with the database stored locally and had no problems. However, ran into this problem now when the database is external. Incase this information helps the software is being run under Linux via Netbeans. The previous testing was performed using Netbeans under Windows.
Any help would be much appreciated.
Thanks,
MartinHi i am using the following code and i am getting the same error ....
public class DBConnection {
private static Connection con=null;
public DBConnection() {
System.out.println("In db Connection..");
public static Connection getConnectionObj(){
if(con==null){
con= new DBConnection().getConnection();
System.out.println("In db Connection.. if");
return con;
else{
System.out.println("In db Connection..else");
return con;
private Connection getConnection(){
Properties prop=new Properties();
FileWriter fw=null;
FileInputStream fis=null;
try{
File file=new File("Connection.properties");
fis=new FileInputStream(file);
prop.load(fis);
System.out.println(prop.getProperty("DriverName"));
System.out.println(prop.getProperty("URL"));
Class.forName(prop.getProperty("DriverName"));
System.out.println(prop.getProperty("DriverName"));
System.out.println(prop.getProperty("URL"));
con=DriverManager.getConnection(prop.getProperty("URL"),prop.getProperty("UserName"),prop.getProperty("Password"));
fis.close();
}catch(Exception e){
e.printStackTrace();
if(fw!=null){
try {
fw.close();
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
if(fis!=null){
try {
fis.close();
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
return con;
}I am not using the connection pool.
For the first request it is working fine but later request's it is giving the closed connection error.
Thanks in advance.
Edited by: EJP on 10/10/2011 20:28: added {noformat}{noformat} tags: please use them -
FATAL NI CONNECT ERROR 12203 CONNECTING TO :
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=ORACLE80)
(ARGV0=ORACLE80ORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=BEQ)))')))
(CONNECT_DATA=(SID=ORACLE)(CID=(PROGRAM=D:\DEV60\BIN\IFDBG60.EXE)(HOST=DEVELOPER)
(USER=DEVELOPER)))
VERSION INFORMATION
TNS FOR 32-BIT WINDOWS : VERSION 8.0.6.3.3 -PRODUCTION
ORACLE BEQUEATH NT PROTOCOL ADAPTOR FOR 32-BIT
WINDOWS: VERSION 8.0.6.3.3 -PRODUCTION
PLEASE TELL ME HOW CAN I SOLVE THIS PROBLEM AND WHAT IS REASON FOR SUCH PROBLEMI didn't know enough to answer your question myself, so I visited http://groups.google.com and searched using the following keyword (including quotes):
"FATAL NI CONNECT ERROR 12203"
This search returned the following archived USENET post from Sybrand Bakker (I trust this guy ;) ):
From: Sybrand Bakker
Date: Fri, Feb 9 2001 3:33 pm
Email: "Sybrand Bakker" <[email protected]>
Groups: comp.databases.oracle.tools
Beq is acronym for bequeath which is a variant of interprocess
communication. This works locally on the server only.
If I understand your situation correctly you are not on the server
12203 unable to connect to destination means sqlnet can't establish low
level communications to the host.
You need to setup an ordinary tcp/ip connection.
Hth,
Sybrand Bakker, Oracle DBA If you are not on the server, then the above likely explains your problem.
Hopefully this helps,
Eric Adamson
Lansing, Michigan -
Connection error. Connect to Internet but I'm connected
Hi there,
I help customers downloading ebooks with ADE. I have a customer who can't open his ebook and hi gets this message:
"connexion error: ADE can't connect to the activation server. Make sure you are connected to internet"
He assures he is connected to internet.
Anyone has any advise, suggestions on how to work this around?
I'll really appreciate your help.I help customers downloading ebooks with ADE. Brave person ... Good luck
ADE messages are sometimes not quite appropriate.
I suggest trying the following in this order.
Order chosen for easiest first, rather than most likely to work first.
~~~
(1) Remove any old authorizations (ctrl-shift-D to ADE, cmd-shift-D if on Mac).
Restart ADE, and try to authorize again.
(2) (Temporarily) disable any firewall and try again.
(3) (Temporarily) disable any antivirus and try again.
(4) Try the older but more reliable v1.7.2.
I feel like a broken record suggesting this one; but it has proved the solution in lots of different situations,
including this one. http://forums.adobe.com/message/5051168
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172 -
Internet Connection error while connected
"iTunes could not connect to the music store.Make sure your network connection is active and try again." This error is killing me with I have been using iTunes forever and all of a sudden, last week, I get this message. I can still surf the net with Safari and IE and have access to all my network drives, so why does iTunes now, not see the internet? How can this be fixed? I have checked all the preferences and there is nothing showing a section where you can alter network settings. I am using 6.04.2 on a Windows XP machine.
the build in windows xp firewall is off and if it was on, itunes has been selected to be one of the programs to have free access.
-
ORA-00020 error, max connections reached
I tried logging into TOAD from back-end but it started giving error like 'ORA-00020, maximum no of connections exceeded...'. What, are the steps we can take to counter this.
I hope, my question is clear.
Please, help in solving the doubt.
regardshi,
thanks, for your answer. But, in init.ora, the entries are like:-
# Processes and Sessions
#processes=250
processes=300
Is, there a difference from this in the maximum sessions possible which is given by 'sessions' parameter as
SQL> connect /as sysdba
SQL> show parameters sessions
When, I give :-
select count(1) from v$session
it gives 460.
Can, you please clear the doubts in the scenario put as above.
regards -
Unable to connect error while connecting to more than one server in a cluster
hi,
I have a weblogic cluster of two servers. The stateless session bean is deployed
on both these servers as well as the cluster. The weblogic used is 6.0 sp2. I'm
using a custom router class which redirects the calls to bean's business methods
in a round-robin fashion to all the servers in the cluster.
When both the servers (say s1 and s2) are up and running a request comes from
a servlet deployed on admin server, the request is first sent to s1 which is fulfilled
but in the same servlet a second call is made to the bean which the custom router
class directs to s2, but here the exception comes as, unable to connect to JVM
of the remote server s2.
Now if I shutdown s1 and retry then, the request is nicely routed to s2 and fulfilled.
And if s1 is up again and request is sent to it, this time it gives same error
for the s1.
So on the whole the admin is able to talk only to one of the servers. why is this
happening ?
Here all the three servers s1, s2 and admin server are on different physical machines.
any pointers ?
regards,
Nikhil.
Opps!
Sorry, I had an error in the 3rd SQL statement. Works fine
PP -
Connection Error while connecting to GEO_DIM.xml in demo folder
Dear All,
I am tring to create an interface to import data from xml file to ralational table. I am using ODI 11g, and have downloaded demo.zip file in whic GEO_DIM.xml file is provided. I am using the same by setting values as below;
JDBC DRIVER: com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
JDBC URL: C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\demo\xml\GEO_DIM.xml&re=GEOGRAPHY_DIM&ro=false&case_sens=true
When I try to test the connection, I get following error.
Can someone tell me how to resolve this?
java.sql.SQLException: Driver class [com.sunopsis.jdbc.driver.xml.SnpsXmlDriver] does not accept URL [C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\demo\xml\GEO_DIM.xml&re=GEOGRAPHY_DIM&ro=false&case_sens=true]
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
Thanks in AdvanceI resolved the error..
Thanks for your help. The URL need to be;
jdbc:snps:xml?f=C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\demo\xml\GEO_DIM.xml&re=GEOGRAPHY_DIM&ro=false&case_sens=true
Maybe you are looking for
-
Animated GIF in MIAW not so animated
My stage has a handler that executes a shell Ping command which unfortunately is not asynchronous, this means the stage has to wait for a response back from the remote computer before it can proceed and that response could take as long as 30 seconds.
-
Notification or Alert when selecting Item with charge on Sales Order???
Hello, Is it possible to make an notification / alert on a salesorder when entering a item with batch/charge??? Now everytime the customer must enter CTRL-TAB on amount field to select a batch but don't get a reminder for the batch. They don't want t
-
Hello Gurus, My requirement is to send an invoice smartform as pdf attachment thru email to customer. I'm able to do it successfully using output determination and SCOT setting for smartform as 'pdf'. But in Production system, the SCOT setting is 'TX
-
Default photo folder question....
Is there a way to set the default folder to be my remote storage, so i do not have to load all my pictures onto my hard drive? OR do I have to load them on an as needed basis then delte them to restore the space?
-
Media control missing after updated iso 7.1.1
Hi I updated ISO 7.1.1 for my son, that he is using the iPhone 4 After the software updated, the media control was missing. I already searched the internet and did everything that was stated there but the volume and media controls are still missing.