Internet Connect on an Mac Book Pro worked on the previous version but doesn't load in 4.0
See question
What version of iTunes is on the Mac?
What OSX version is on the Mac?
The 5G iPod requires iTunes 10.7 or later and that requires OSX 10.6.8 or later.
Similar Messages
-
a
You can do it wirelessly, but that will take some time... you could also purchase a Thunderbolt to Ethernet adapter or a Thunderbolt to FireWire adapter. That would certainly be faster. You should be able to purchase either adapter at your local Apple Store or at the online Apple Store.
Good luck,
Clinton -
I have my HP OfficeJet Pro 8500 A connected to my Mac Book Pro on a Wireless network. It works and
I have my Hp Officejet Pro 8500 A connected to my MAc Book Pro which is running Lion OS on a wireless network. It works just fine and prints and everything. The problem is a "HP Utility" window that pops up on my screen and says it is "connecting to device" and lists my printer. It just runs and runs and the entire thing is gray - meaning I can't close it, cancel it, or anything. When you try to click on it, the arrow becomes the color wheel of death. It is driving me crazy. I have gone through settings, I have downloaded the latest drivers, I have looked in utilities, I have opened the printer folder and can't find where this thing is coming from or how to turn it off. Please help. And yes I have turned offf the computer and rebooted.
If you are using Snow Leopard or Lion and have HP software for pre-Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the HP software on your Mac before you upgraded - even if you did a standard uninstall of the old software or installed new software over the top of it) you must uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall <<<< This IS the Scrubber Option, there is no button labeled "Scrubber"
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Download and install this: http://support.apple.com/kb/DL907
Now reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
If you want more features, you can download and install the Full Featured software from the "Support & Drivers" button at the top of this page, otherwise, basic printing and scanning will work without it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
I have a Mac Book Pro, lately if the laptop has been at rest for the night, I need to restart it to get connectivity to the internet. What can I do to cure this problem?
Hi Bluedrake
Please download the CS6 Trials from below link : Download Adobe CS6 Trials: Direct Links (no Assistant or Manager) | ProDesignTools
Follow the instructions to Start your Download ...
Use your Serial Key to Activate them .... -
I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
My dj mixer works on another mac computer with the same soundcard and different firewire cable.
Hope someone can help
Thanks
Waynekmiddlet88,
yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then. -
How can i connect my 2008 mac book pro to a tv?
how can i connect my 2008 mac book pro to a tv?
The Mini-DVI to DVI adapter is designed for the iMac (Intel Core Duo), MacBook, and 12-inch PowerBook G4 — allowing you to connect to an external DVI monitor. It can also be used in combination with the Apple DVI to ADC adapter to support older Apple flat panel Studio or Cinema Displays.
-
I have a mac book pro. Yesterday the mail app failed to open. I have tried to open it from the dock and the application folder but nothing happens. Does anyone have any suggestions to get it to work?
You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years. -
No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this? I received it as a gift for college, but its hard to do research when everyone constantly yells at me to get off because they can no longer continue what they're doing.
<Edited By Host>" how can I sync my iphone to my mac book without losing all the music and pictures on it?"
You cannot. Copy everything you want form the old computer to the new one, then sync it.
it basically says you have to erase your iphone to sync to a new itunes!
Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content. -
ive got a mac book pro i bought the lead to connect to the tv but is there a lead for the sound to come out of the tv and not the laptop?
Depends which Macbook Pro, depends what cable you have. MBPs from 2010 onwards can transmit audio through their Displayport connectors if you have an HDMI input on your TV and an adaptor which also transmits audio. Not all Displayport-HDMI adaptors do this. If you're trying a VGA input on your TV, that will not carry audio.
If your MBP is older than 2010, you will need to use a separate audio cable to connect from your computer's 3.5" mini audio connector to the appropriate audio input on your TV.
Matt -
Why won't my TV connect to my Mac Book Pro via HDMI thunderbolt after an upgrade to OS X Yosemite version 10.10.1?
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer -
I am having trouble on older mac book pro working in Preview its like being on old PC
My newer 3 year old mac book pro is broke and i am using the older one ( lion) to do some work and having to use preview because i cant reinstall all software on this as well.
I am having trouble on older mac book pro working in Preview.
Why is Preview bad on older machines?Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again. -
How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps! -
I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?
Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331 -
I have a new mac book pro which i use in england but I need to use German charachters frequently, is there a way of having both visable on the keyboard?
For example so that I can just press shift or another key to get the German character.Some may already exist, but you will have to learn them. On my old system these can be found through keyviewer.app For example, if I press option+s I get ß Umlaut is a bit cumbersome as option+u then the actual letter. It may be possible to bind a key to do this function, possibly through System Preferences > Keyboard > Shortcuts
I have old, old references for utilities that let you rebind keys to other functions, and you would have to see if they have modern equivalents.
Ukelele Mac OS X Keyboard Layout Editor - http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele - mostly useful for character, not function mapping.
Check Butler, ikeys, quickeys or Spark -
how to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer
any suggestions?Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion
Maybe you are looking for
-
How to generate a report in pdf from a stored proc
Hi, i need guidance on how to generate a report in pdf from an oracle stored proc. The environment is oracle 10gas + 10gdb. On a specific event, a PL/SQL stored procedure is called to do some processing and at the end of the processing to generate re
-
Qosmio X770: 4 nVidia HD audio devices in device manager
So i have a few questions... In my device manager i have [this (screenshot)|http://i.imgur.com/NfH5E7p.jpg]. So i have (!) 4 nvidia hd audio and 1 hd realtek audio. I usually update my nvidia video driver and nvidia hd audio driver is updated every t
-
10.5.2 Virtual Domains - 2 user questions
(NOTE: Generic host and domain names used in this mail, real ones are used for the actual machine) Clean 10.5.1 install, immediately hit software update multiple times till 10.5.2 and any other offered updates were installed. Went into WGM and create
-
How can I make "Numbers" the soft by default ?
Hello you all, I want to get off Windows. How can I open incomming Windows files ( Word, excel,Ppoint) aqutomatically by i Work software? thanks for your suggestions Fanando
-
My NOOK COLOR & NOOK TABLET are registered under different names, I need to change one so that I can downoad from the library & read the same book on both devices.