Internet connected according to Network Diagnostic but Safari can't connect

I just bought a new iMac in Australia yesterday; when I brought it back home and connected the ethernet cable to it I thought it would automatically connect to the internet as my other family members' Macs have in their homes, and as my old PC did.
Unfortunately it did not, so I bumbled through Network Setup in System Preferences with little idea of what I was doing and essentially hoped for a miracle. I copied the 'IP address', 'Router' address and 'Subnet mask' numbers over manually from my PC but that didn't work. I then selected 'Using DHCP' and it gave me a seemingly normal IP starting with 192.xxx.xxx.xxx and the same subnet mask. When I run 'Network Diagnostics' it says my internet connection appears to be working correctly, and there's green lights next to everything. But when I go to Safari and type in www.google.com it takes forever before finally telling me that "Safari can't connect as the server is not responding'.
I have scrolled through pages of this forum trying to find answers but I haven't yet. I tried changing the DNS addresses to the ones from OpenDNS but that didn't seem to work.
Any suggestions would be greatly appreciated!

What kind of connection do you have?
-DHCP, this assigns the IP automaticly
-PPPoE, you will have to enter the information from your ISP manually in rder to connect
If you copy the IP from another machine it will create an issue since IP´s are unique to for machine.
Can you verify you internet connection, just to make sure it actually works?
+you can connect with other machines?
- you have to look at the settings on you machine
+you can ping www.google.com from Network utility
- if you can you have a connection to the internet, there might be a problem with your DNS server
+you can connect with IP addresses but not the HTTP
- copy and paste googles IP into your web browser, if it connects you should contact you ISP or look for DNS trojans in your system
+what does network utility show of send errors and link speed.

Similar Messages

  • I have a MacBook Pro.  My mac can detect wifi.  But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest.

    I have a MacBook Pro.  My mac can detect wifi.  But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest. (Network settings, ISP, Internet and server.)

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • HT3819 I can use remote on my iPhone to connect with my iTunes library, but i can't connect to another computer using home sharing to access apple tv.  I have used the same access ID and password that is used for the apple tv.

    I can use the Remote app on my iphone to connect with my itunes library on my computer, but I can't connect to the Apple TV using home sharing with another computer in the house.  I am using the same ID and password that the apple tv uses to connect with the other computer.  Also how do I check what version of IOS that my iphone is using?

    Version:
    iOS Settings>General About (or it'll say when you hook it up to iTunes)
    Are all the devices on the same physical network?  I think you're saying all are set up using the same home sharing credentials.
    If you've not done so restart all devices and your router.
    If you can get any of the devices connected by ethernet to reduce the wifi burden that may help but to be honest I would not expect simply beoing on wifi to prevent devices/computers appearing in the list.
    Does the other computer have any firewall or port blocking software running?

  • I'm connected to the Wi-Fi network OK but safari and email say I'm not connected to internet

    I'm connected to the Wi-Fi network OK but safari and email say I'm not connected to internet so nothing happens.

    You may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • I connect on the wi-fi network but i can't connect in internet

    i connect on the wi-fi network but i can't connect in internet

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Wi fi showsonnected but safari says not connected to internet

    wi fi shows connected but safari says not connected to internet.

    I forgot to mention that, but I have done that as well. 
    An update:  my husband took the iPad to McDonald's to see if he could connect there, and got the same message (Safari could not open the page because it is not connected to the Internet).  I'm stumped!

  • I have full bars but i can't connect to the internet. I've done all the usuall thing  like reset the ipad reset my internet security but everytime it says "safari cannot open the page because it is not connected to the internet" Any ideas?y

    I have full bars but i can't connect to the internet. I've done all the usuall thing  like reset the ipad reset my internet security but everytime it says "safari cannot open the page because it is not connected to the internet" Any ideas?

    As with previous posts this is usually a DHCP issue and occurs frequently especially with routers connected to Cable Modems or those Micro-Cell towers.
    Unplug all Routers, AirPorts (or other off brand Wi-Fi broadcast units) and any other Wireless broadcast unit that might provide you with a WDS (often other AirPorts feeding off the signal of the AirPort closest to Cable/DSL Modem) and best to totally power down the Unit affected; lastly either hold a reset button on Cable/DSL modem for 30-45 seconds or actually power it down if an option (not suppose to power down Cable Modems that have Telephony for some odd never completely explained to me reason).
    Let Cable/DSL Modem re-boot till 'all green lights'. Then power up each device involved in order from closest to farthest waiting each time for completion of initiation. Micro-cell towers can take 10 minutes to completely re-boot and you must wait for across the board green lights in my experience. Even WDS can add a few minutes till all green on mother AirPort unit.
    Only NOW may you re-start the offending device and see if it will connect. Works about 99% of the time!

  • I can connect to a network but I can't connect to internet...

    Hi! I have a rarely problem:
    When I try to connect to a wireless network I can and it shows that I have a high signal on the menu But I can't connect to the internet or it runs very slow... The macbook says that I'm connectet to the internet :S. I try to connect from windows XP with bootcamp at the same network and it runs very fast... What's the problem?? Thanks!
    Sergi

    Yes, this is possible ... but understand that you would need two switch wireless networks between network/Internet access and for printing.
    The AirPort would not get a Public IP address, but it would have a Private IP address of 10.0.1.1 ... and it would be providing wireless clients connected to it with Private IP addresses in the 10.0.1.2 - 10.0.1.200 range.
    AirPort Utility > Select the AirPort > Manual Setup > AirPort > Wireless
    Wireless Mode: Create a wireless network
    Wireless Network Name: <enter a desired Network Name or SSID>
    Radio Mode: <leave the default or select a desired radio mode>
    Channel: Automatic
    Wireless Security: <select the desired wireless security type>
    Internet > Internet Connection
    Connect Using: Ethernet
    Connection Sharing: Distribute a range of IP addresses
    Internet > TCP/IP
    Configure IPv4: Manually
    IP Address: 10.0.1.1
    Subnet Mask: 255.255.255.0
    Router Address: 10.0.1.1
    DNS Server(s): <leave blank>
    Domain Name: <leave blank>
    Internet > DHCP
    DHCP Beginning Address: <leave default or change to a desired starting address>
    DHCP Ending Address: <leave default or change to a desired ending address>
    Advanced > Logging & Statistics
    Allow SNMP (unchecked)
    The AirPort will still report at least three errors: 1) Configuration of WAN, 2) SNMP over WAN, and 3) Double NAT. These can all be safely ignored to stop the AirPort's status light from flashing amber in this configuration.

  • Safari can't connect to server, but is connected to the Internet

    Occasionally I receive the message that "Safari can't connect to the server" for particular Web sites. I believe most of the time it occurs when I am trying to access a Web site that eventually asks for a secure login. In none of these cases has my Macbook Pro actually lost connection to the Internet because I can "surf" to all sorts of other Web sites immediately after receiving this message for a specific Web site.
    In that context, does that mean that the specific Web site itself is "down" or is there some other issue with my Macbook Pro?

    Hi there cornguy.rln,
    You may want to try resetting Safari as an initial troubleshooting step. Take a look at the article below for more information. Note: While this information was is for Safari 6, it also applies to the current version of Safari 7.
    Safari 6 (OS X Mountain Lion): Reset Safari
    http://support.apple.com/kb/ph11914
    -Griff W.

  • My ipad 2 can see my home wifi but I can't connect to the internet anymore ???

    I can connect my Ipad to the encrypted network at home - but I can't connect to the internet anymore.  In Safari, Itunes, email .... NOTHING ! Help pls.

    You may not really be connected to your WiFi network.
    Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
    Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

  • HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

    I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • The wireless symbol is present and indicates a strong signal, but I can not connect to the Internet.

    The wireless symbol is present and indicates a strong signal, but I can not connect to the Internet.  I'm  on my home network and have never had trouble before.  My iPad is current on all updates. I have tried to reset the network settings, nothing has worked.  I can connect to the internet via my iPhone  personal hotspot and all other wireless devices are operating normally on my home wireless network.

    I am also having this issue. My boy just got an iPod 4 touch, upgraded to iOS 6. I have a D-Link DGL-4300 108G Wireless Gaming Router. With the iPod I can connect to the router, get an IP address (either DHCP or Static) and even browse through the menu on the router, but I can't connect to the internet.
    With a DHCP IP address the iPod give the error "Not connected to the internet" with the static IP address it takes a long time when trying to connect to a website but then it gives the error "server stopped responding".
    Clearly the issue is in some setting in the router. I've tried setting up a filter so that the iPod will always have access based on MAC address. I've tried changing the various wireless connection settings, all to no avail. I would greatly appreciate some guidence here.

  • My WiFi signal is good but I can't connect to the Internet and it's still loading the server

    My WiFi signal is good but I can't connect to the Internet and it's still loading the server. How can I fix this or make the server connect faster?

    try:
    iOS: Troubleshooting Wi-Fi networks and connections

  • Safari Can't Connect to the Internet

    In an attempt to eliminate kernel panics after upgrading to 10.4.7, I removed two login items which were installed by Earthlink Total Access. After having done so, Safari can't connect to the server. I can run Mail, Foxfire and Moztlla.

    same here. Safari 3.0.4 opens perfectly well, checks .rss feeds and nothing seems to be wrong.
    but it does not do anything in terms of internet browsing. entering a url does not help, clicking on a bookmark does nothing either. if I click on a link from, say an e-mail safari opens but the screen stays white and the adress field empty.
    any ideas, I tried a forum search but could not find anything related but this topic.
    help is greatly appreciated!

  • I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out.  But I can't find any information about "timing out" or how to correct the situation.  Any help?

    Disable your antivirus and firewall, and try again.

Maybe you are looking for

  • Live CD resolution

    Hi guys.. I got a small  9" (640x480 mono) monitor for cashiers from a friend..so i wanted to test it out.. I have a problem with the resolution in the console.. When the system is booting i see the text normal..but when i get to root prompt..i have

  • Changing resolution programmatically

    Hello all, Does anybody know how to change resolution programmatically using java. Even in C or C++ so that i can use JNI. I can get the resolution by java.awt.Toolkit.getDefaultToolkit().getScreenSize(); but i am not able to set the resolution. Plea

  • How come whenever I try to change my security questions the email to change them never sends?

    I cant buy apps because I forgot my security questions, and whenever I click the button to send the email which would allow me to change my security questions, it tells me it has sent but when I check my email the email hasnt sent.  I have tried to s

  • Personalization Scheduling Engine does not start -- Bug?

    Hi there. I don't know if it's the correct forum to post my question. If I'm wrong I ask you to redirect to the correct one. I've correctly installed Oracle AS 10g release 1 according to the following topology, on the production environment : Server

  • Replace tab markers with xml

    Hey, I'm just trying to get an xml import to add content to tags. I have the structure worked out and tags are importing but I want to import the tag once for each named tag. In other words, if I have a tag called 'Doc-title' I would like all text ta