Internet connection are not detected

hi, i upgrade from win xp to 7. After acrobat 8 installation done, i got problem during activation. Cant activate, error msg "INTERNET CONNECTION ARE NOT DETECTED". Please help to to solve it. Thank you.

If you are using the 32-bit version you may be in better luck. It seems like a lot of Win 8 is similar to Win 7 (I know that is probably debatable) and several folks reported getting it to work on Win 7. If you have not tried with logging in as the administrator and turning off anti-virus during the install, you might be successful. However, you apparently got it installed. There may be some changes to the internet operation on Win 8 and that will have to be the focus, but that is not something I am good at. If you are not time pressed and stop by regularly, maybe some folks will come by with the suggestions.
For AA7 and before, the major problem with Win 7 was the failure of AcroTray. Hopefully some folks will be by soon.

Similar Messages

  • Internet connection "Does not detect a dial tone" ????

    Help!
    I have not been able to connect to the internet on my imac G5 for the last couple of weeks. I have tried the usual connect and restart computer and have spoken to my ISP who say it's not to do with them. The message 'does not detect a dial tone' comes up when i try and connect via the modem. I am now at a loss as to what to do. It does appear to be a Mac problem (having spoken to Mac support aswell), but short of re-installing the OS i am not sure what action to take next.
    Any help would be greatly appreciated.
    Thanks in advance

    Welcome to Apple Discussions
    Noticed you are running Panther on an iMac G5? Is that correct?
    What are your external modem settings in your System Preferences>Network/TCP/IP and modem panels? What changed in your system just prior to your not being able to connect to the Internet?
    Short of reinstalling the OS, you can reapply the combo update for the particular version of OS X you are running.
    Please post back.

  • Hi I have mac os x 10.6.6 and need to update however keep getting the message " software update server ( 172.22.13.4 ) is not responding". My internet connections are all working. Any ideas how to solve this?

    Hi I have mac os x 10.6.6 and need to update however keep getting the message " software update server ( 172.22.13.4 ) is not responding". My internet connections are all working. Any ideas how to solve this?

    If you have enough room on the boot drive, head to System Preferences > Accounts and create another Admin Account, log out and into it and try your Software Update again.
    If this doesn't work, connect a Ethernet cable to the router or modem (power off/on) and try again.
    If this doesn't work then run through this list of fixes.
    ..Step by Step to fix your Mac
    Diagnosing network issues

  • Iphone and Ipad are not detecting airprinters with Dlink DIR-651

    Since changing my router to a Dlink DIR-651, my apple deivces are not detecting airprinters.
    Dlink says I need to open ports on the router.  
    Please advise.

    Hi..I've had a variant of this problem; my internet was accessible but my devices on wifi could not see the PC on Lan. That meant no iTunes syncing, Airplay from iTunes etc.
    Dlink has a strange default setting that isolates Wifi & Wired connections into different subnets.I'm assuming you have DHCP setup on your router and you're PC or MAC has internet access via the same router. Try the following steps to see if this solves the problem for you; first Log into your DLINK admin page-
    1. Go to Setup -> Local Network  and Uncheck the box that says 'Configure the second IP Address and Subnet Mask for LAN' - Hit Apply
    2. Go to Wireless -> Wireless Basic and Uncheck 'Enable MultiAP Isolation' - Hit Apply
    3. Restart your Router
    You do not need to port forward. Just get the Wired & Wireless devices on the same Subnet.
    Let me know if this solves your problem. I've been frustrated by my problem for months & had nearly given up.
    J

  • Getting "Internet Connect Could not open the communication device"

    I am getting a pop up showing "Internet Connect - Could not open the communication device."
    Why is this? I have never got it before and after awhile my internet works just fine. I am trying to understand why it's popping up. The wireless networks I connect to are always working fine but my computer is just now giving me this pop up.
    Please help. Thank you.
    -Mike

    you could try moving either file one at a time, don't delete them though
    if moving the files and restarting does not fix the problem you can always put them back to the original location, it's just settings files
    possibly you'd need to setup your network prefernces again
    also, in System Preferences, click on Accounts pane, then your user name (you may need a password for that)
    on the right side of the Accounts window there is "Login Items" tab, see if anything shows up in login items
    as a guess, machine tries to connect by looking for your cell phone to use as a modem or something
    maybe check Network preference pane, see what shows up in Bluetooth

  • Internet Connect Could not find a PPPoE server

    We just bought the new MacBook Pro and set it all up ok and yesterday bought a D-Link Wireless ADSL router.
    We can get onto the D-Link network fine and full signal is shown but when we try to connect the error "Internet Connect: Could not find a PPPoE server" comes up.
    Does anyone know what the problem is?
    I looked at a couple of other threads with similar tpics but none of them seemed to help me :S
    Do I just need to contact BT about it as they are our server or is it something setup wrongly?
    I hope you can help me
    Lizi

    ok, thanks
    I've done that but it still doesn't work
    whats VPN? and do I have to fill in that first(ie. Server address, not that i know what it would be, Account name and Password)? and PTTP or L2TP?
    this s totally conusing me...

  • Error message: "FireWire connections are not supported.  To transfer songs"

    I recently purchased a Monster iCarPlay to play my ipod in my car. I have had no problems until recently. Upon disconnecting my ipod from the iCarPlay wire, I the following message popped up: "FireWire connections are not supported. To transfer songs, connect the USB cable provided." It also prompts me to click the center button to dismiss the message. However, I'vd followed these instructions, and the message does not go away. Does anyone know what I can do to resolve this problem? Or is it anything to worry about?

    That is the message you see when you attach a 5th gen iPod to a computer using FIREWIRE. so... i suspect that for some reason, the 3rd party iCarPlay device must be confusing the iPod into thinking it is being docked or attached to a data line of some type and not simply charging.
    As for the sudden occurrence of the message, it does seem strange however, keep in mind that you are using a 3rd party device that may not be supported or endorsed by Apple at all.
    Beavis2084

  • Mac Pro OSX 10.8.3 HP 4000 series scanners are not detecting.

    Well..I think, I did everything. I have followed all instructions recommended by HP. I have updated and installed latest drivers. I have even searched the warez sites to find a trick. Useless, useless and useless.
    Hardware is retina display with 256 GB SSD, 1600 mGz  8 GB ram and I7 processor. OSX version is 10.8.3
    HP 4000 series scanners are not detecting by this machine. Vuescan is detecting but the scanning quality is also terrible.
    Strange. I have nothing to say.

    For the Scanjet 4850, follow the link below and click on the instructions tab.  It looks like you have to get the software and drivers for 10.6 and run a patch to make them work with 10.8.  That should get the scanner installed and working. 
    Scanjet Software Patch to Use OS X 10.6 Software and Driver on OS X 10.7 and 10.8
    For the Scanjet G4050, all you should need to do is install the driver from the link below to be able to use the scanner with image capture and other similar products.
    HP Scanjet ICA Software for Mac OS X 10.6.8, 10.7 or 10.8
    Let me know what happens.
    I am a printer tech for HP.

  • What happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but no help

    what happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but it still asked me to download a 700mb software update
    plz help

    If you downloaded the correct version for your iPad model (and the different models have different ipsw files), then you should be able to navigate to it in iTunes by pressing and holding the shift key on Windows (command key on Mac) when clicking the Check For Updates button.
    Message was edited by: King_Penguin

  • Why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • Embedded fonts are not detected by Designer

    I am trying to create a fillable pdf based from a form created in Adobe Framemaker. However, the fonts I have embedded in the .pdf source file from FrameMaker are not detected by Livecycle Designer. These include very common fonts like Helvetica and Times. Is there a setting somewhere in Designer to pick up on these embedded fonts?

    Thank you for your feedback. The Job im using is simple take a word document converting it into a pdf format. If this is done I will see it in my Acrobat view. There is no fonts at all. The System is notifying me that the font "ETBFGYI+DIN-Regular" are not embedded. And there will be some character not shown or printed correctly. I didn't change anything on the setting of Acrobat. I'm using this Acrobat almost for 2 years and I never had any problem. The Problem came up after the last update of the software to version 11.01.10.

  • How can I import photo to computer if my photo were save in event instead of saved photo for ipad1?  Why Photo in event are not detected ?

    How can I import photo to computer if my photo were save in event instead of saved photo for ipad? Photo in event are not detected.

    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
     Cheers, Tom

  • EA2 Connections are not saved

    When I migrate my connections from a previous version of SQL Developer these connections will not be saved.
    In the command window I get following messages:
    WARNING: Unknown directive: SetSkipJ2SDKCheck
    (this message is always displayed in the cmd window when I start SQL Developer)
    During import of the connections following messages are displayed in the command window:
    DB Adapter warning: Replacing connection creator oracle.jdeveloper.db.adapter.OracleConnectionCreator for subtype oraJDBC with oracle.dbtools.raptor.standalone.connection.RaptorConnectionCreator
    DB Adapter warning: Replacing connection creator oracle.jdeveloper.db.adapter.MySQLConnectionCreator for subtype MYSQL with oracle.dbtools.thirdparty.mysql.MySQLConnectionCreator
    When I restart SQLDeveloper these messages are displayed again and the connections are not displayed in the connections tree.
    Client:
    Windows XP professional SP2
    APPDATA=\\dus30srv0213\home_D$\Ernst.Leber\XPC\Application Data
    Perhaps the '$' in my APPDATA causes the problem.

    This is clearly printed in bold in the release notes, dude!
    People are free to do as they want, but if you don't follow the guidelines, don't come complaining afterwards either...
    regards,
    K.

  • Docsis 2.0 and 1.1 cable modems are not detected via UBR-MC20X20V-5D line card

    Hi All,
    We have uBR10K series CMTS and recently installed UBR-MC20X20V-5D line card, requirement is to configure this line card to support docsis 1.1 and 2.0. Problem is after finished the configurations modems (Hitron and Motorola) are not detected by the system. means no modem mac address listing under "Show cable modem" command. 
    Our CMTS has the following components
    ESR-PRE2: x1
    ESR-PRE-MEM-FD128: x1
    UBR10-DTCC:  x2
    UBR-MC20X20V-5D: x1
    iOS version:     12.2(33)SCE3
    Part of running-config as follows
    cable spectrum-group 13 band 22800000 26600000
    controller Integrated-Cable 8/0/0
     rf-channel 0 cable downstream channel-id 145
     rf-channel 0 frequency 501012500 annex B modulation 256qam interleave 32
     rf-channel 0 rf-power 59.0
     no rf-channel 0 rf-shutdown
    interface Cable8/0/0
     no cable packet-cache
     cable bundle 1
     cable upstream max-ports 4
     cable upstream 0 connector 0
     cable upstream 0 spectrum-group 13
     cable upstream 0 channel-width 3200000 3200000
     cable upstream 0 docsis-mode tdma
     cable upstream 0 minislot-size 2
     cable upstream 0 range-backoff 3 6
     cable upstream 0 modulation-profile 21
     no cable upstream 0 shutdown
    diag output attached herewith. Please any one advice on how to resolve this issue.
    Thanks in advance.

    Hi All,
    We have uBR10K series CMTS and recently installed UBR-MC20X20V-5D line card, requirement is to configure this line card to support docsis 1.1 and 2.0. Problem is after finished the configurations modems (Hitron and Motorola) are not detected by the system. means no modem mac address listing under "Show cable modem" command. 
    Our CMTS has the following components
    ESR-PRE2: x1
    ESR-PRE-MEM-FD128: x1
    UBR10-DTCC:  x2
    UBR-MC20X20V-5D: x1
    iOS version:     12.2(33)SCE3
    Part of running-config as follows
    cable spectrum-group 13 band 22800000 26600000
    controller Integrated-Cable 8/0/0
     rf-channel 0 cable downstream channel-id 145
     rf-channel 0 frequency 501012500 annex B modulation 256qam interleave 32
     rf-channel 0 rf-power 59.0
     no rf-channel 0 rf-shutdown
    interface Cable8/0/0
     no cable packet-cache
     cable bundle 1
     cable upstream max-ports 4
     cable upstream 0 connector 0
     cable upstream 0 spectrum-group 13
     cable upstream 0 channel-width 3200000 3200000
     cable upstream 0 docsis-mode tdma
     cable upstream 0 minislot-size 2
     cable upstream 0 range-backoff 3 6
     cable upstream 0 modulation-profile 21
     no cable upstream 0 shutdown
    diag output attached herewith. Please any one advice on how to resolve this issue.
    Thanks in advance.

  • Favorites exported from Internet Explorer are not available in Bookmarks drop down list as they should.

    Favorites exported from Internet Explorer are not available in Bookmarks drop down list as they should. Where can I find them?

    You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Organize Bookmarks).
    If you can't find them in the "From Internet Explorer" folder then try this:
    Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export<br />
    Import the HTML file in Firefox 3: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
    http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")

Maybe you are looking for