Internet connection error saying a cable is not plugged into the network adaptor

Hi, I have a
HP Pavilion Media Center m8530f Desktop PC recently my hard drive quit working so I installed new hard drive same brand Seagate just bigger storage had to install using my original recover discs that I created when I bought computer in 2008 from HP refurb it is still all original no upgrades and when finish could not connect to internet, get message a cable is not plugged into the network adapter "Local Area Connection", I have checked cable it is plugged into adapter I plugged cable into my laptop and it recognises it immediatly, I uninstalled network adapter and went to HP and downloaded adapter for my computer spec on to falsh drive and reinstalled on computer still same message, under devce manger adapter shows up and has no warning symbols when i run check on adapter it says it is fine.
NEED HELP, Thanks Ronbo68

It's on the rear, just above the LAN cable (internet cable). PS> Your not reading all that is asked.
Step 1: Checking cables and connections
Use the following steps to check connections and networking hardware.
Check the activity light next to the network connector on the back of the computer.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

Vista - a cable is not plugged into the network adapter

It works fine on the following:-
Mac 10.5
Wifi vai apple extreme
Enthernet via DSL
But on Vista (with same machine BootCamp)
Wifi Ok
Enthernet via DSL failed with the error message "a cable is not plugged into the network adaper "local area connection"
I have update the drive of Marvell Yokon 88E8058

It's on the rear, just above the LAN cable (internet cable). PS> Your not reading all that is asked.
Step 1: Checking cables and connections
Use the following steps to check connections and networking hardware.
Check the activity light next to the network connector on the back of the computer.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

USB cable will not plug into my 6555.

The USB cable that came with my 6555 will Not plug into the phone. It seems to be slightly too big. The Nokia Accessories page lists CA-101 as the right one (for $30.00). However, the cable that came in the box has no designation so I cannot confirm the right cable was packaged. I bought this phone at Best Buy and there is no reference on their web site for a USB cable accessory. I do not want to order a $30 part to replace one that was mis-packaged. Does anyone have experience with these micro-USB cables and can confirm which is the right one and where to obtain one? Regards.
Solved!
Go to Solution.

As promised here is my follow up.
I went to Best Buy and talked to the sales team lead. The cable that was packaged in the 6555 box has a *mini* USB connection. The pjone requires a *micro* USB connection. So, my assessment that the cable end would not fit was accurate. The box was missing a small adapter that converts the mini cable end to a micro cable end. He offered to sell me a universal USB cable with the adapter included for half the listed retail price. I paid $8.00. (better than the $30 for a CA-101 from Nolia).
The adapter fits the 6555 USB port. I tried both the universal cable and the Nokia cable to link to 2 of my PCs (w/ Win XP) after installing the Nokia PC Suite. Neither worked. It seems that the PC does not recognize that the phone is there. I know there are other posts with related issues on this forum. So I will drop this thread and search for answers to the latest problem.
Thank you to all the folk who have shown an interest here and posted your thoughts / suggestions.. Regards, Bryan

How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!

How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!

I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated you are using Lion.
1. Did you download and install the 5.6 utility..?
I said to do it.. you never said yes.. I did that.
Please do it. .. you will get no place before you do.
2. Did you bridge the TC.. ?
If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
Can someone help us in resolving this
Thanks and regards
RS

Please expand the log also please check the SAP note 1835436
Regards
Aneesh

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.

http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have.

I had about 6000 pictures on my phone, then said "updating library" was not plugged into the computer, was at dinner trying to pull a picture up. After finished updating i only had 597 photos that were totally random, not in order...help?!

I had about 6000 pictures on my phone, then said "updating library" was not plugged into the computer, was at dinner trying to pull a picture up. After finished updating i only had 597 photos that were totally random, not in order...help?!

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

ATV Update fail. What USB cable actually can plug into the back of this device?

My 3rd Gen ATV suffered a failed update over the weekend and now only shows a screen implying that I connect it to iTunes however none of the USB cables I can find will plug into the narrow slot at the back. Where do I get a cable from that can plug use to reset my ATV?

The Boston Rag.
What's on the other end of the USB cable? Your keyboard or mouse?
-Wayne

My daughter forgot her itouch passcode. itunes will not let me restore because it says i have no internet connection, when i do. we cannot get into the device and it is useless. help!

My daughter forgot the passcode for her ipod touch device. She is completely locked out. I tried plugging into our computer and itunes and clicking restore. I keep getting a pop up saying itunes cannot restore because I am not connected to the internet. My internet connection is fine! Please help! She has only had this decive since Christmas and it is useless!

Restore the iPod from the computer to which the iPod is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Internet connection slower even though TC is not part of wireless network!

How can this be? I connected TC to my iMac by ethernet cable to do the initial backup of my hard drive. The backup has been complete now for a number of days. What really mystifies me is the slower connection speed (I have cable) even when TC is NOT backing up, i.e., even between the hourly backups when TC isn't running.
I notice the slower speeds mostly via Safari. There is now a noticeable lag time between when I click on a URL and when the page loads. It's intermittent, but sometimes, it's so bad,mI havevto stop the loading of the page and try reloading the page. Usually, this pushes it through.
I never had this problem prior to connecting TC to my iMac.
I also have the most current firmware installed for TC, Airport Utility, etc.
Can anyone explain this phenomenon? I was planning to set up a dual network with TC and now I'm not so enthusiastic.
PS Have been reading through the threads here and came across one that reported a problem with TC and their 2.4 GHz phone? Could this be part of my problem? Even though TC isn't connected to my wireless network?
An additional question: isn't TC a 5 GHz device? Why would a 2.4 GHz device interfere with the 5 GHz TC?
Message was edited by: WildBill

The default radio mode for the TC is 802.11 n operating in the 2.4 GHz mode, but if one has a 5 GHz iMac, one would b able to choose the 5v GHz option?
You would choose the radio mode, using the AirPort Utility, to change to the appropriate 5 GHz radio band to meet your wireless network requirements. If your iMac is "n" enabled, it should be able to both discover the TC's 5 GHz network, but also connect to it.
Also, regarding a previous post on this thread, have you personally used the OpenDNS's DNS servers? Did it make a significant difference? How were the ads?
Yes, I am currently using this service with several of my computers, both Macs and PCs. In most cases I get better performance (as far as locating and accessing web pages) and better stability than when using my ISP's DNS servers. You may find a similar experience. As far as ads, the only "ads" I get is when I either type in an incorrect URL or the site does not exist. You would then get a default message page with a OpenDNS banner.

My ipod will not stay connected to my computer. When first plugged into the usb port, I can see it as a drive. Within seconds it disappears. If I look in the devices area, I can see it but it has a yellow triangle with an exclamation point beside it.

When I connect my ipod to a usb port on my computer, I can see it in my computer as a drive for a few seconds and then it disappears. It can be seen under devices but as a yellow triangle with an exclamation point in it. If I run trouble shoot, it states windows is disconnecting this device.
I can see it in itunes as a device. However, this is a brand new computer, running windows 7. My last one bit the dust in mid use. I want to save the songs on my ipod and to do that I believe I need to be able to see the files on the ipod.
Any help would be greatly appreciated.

Great Troubleshooting on your own so far!. (If you got 2 PC and 2 iPod would be much easier, some of the people in this community has more than 2 of each.)
Hope you did not connect it to a USB Hub, the sync cable must be plug in directly to a USB2 port at the back of the Desktop Computer.
If you have a spare Notebook, with iTunes, connect it to the Notebook, to check if the iPod is working or hung.
Can you iPod run and play songs, when disconnected from the PC? (Sorry, for just asking the obvious)
Anyway, just hard reset your iPod, so that we can start from scratch
1. if your iPod is hung, reset it by pressing Menu and Center button for at least 10 secs till the Apple logo, comes on. (this won't delete your songs in the iPod, if they are not corrupted))
2. Connect it back to your Notebook or Desktop.
if your iPod screen is dead, try charging the battery by connecting it to another computer. if it doesn't connect to successfully to another computer, it may need servicing.
Good luck!

I'm trying to install a new samsung 27" series 7 750 monitor. I have a macmini. when i plug the cord in between the computer and the mknitor, the screen goes white, but no display. When not plugged into the computer the screen stays black and cycles

I'm trying to install a samsung series 7 750 monitor for use with my mini mac. When I plug the computer to the monitor I get a blank screen, no picture. When not plugged in to the computer the screen is black and a square displAys that says analog, HDMI 1, HDMI 2. Any ideas?

Hey there saraszeg,
It sounds like you are trying to use an external monitor with your Mac Mini but cannot get more than a gray screen. You can use the following steps to help troubleshoot the Mac side of things here:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Take care,
Sterling

My iPhone 4 is stuck in recovery mode. I have tried all of the recommended actions but nothing has worked. The phone will also not turn on if not plugged into the charger. Help please! So frustrating

One day the phone just got stuck on ios6 screen then once unlocked it said plug into iTunes. Once I did the phone will not allow me to complete a restore. At the last stages the phone will cut off. I have asked a friend to have a look and he thinks it is stuck in recovery mode loop? I don't know what else to do. The phone is not under warranty and I bought it second hand before Christmas. Please give me any help or advice.

Sounds like a hardware failure. Make an appointment at the genius bar of your local Apple Store. There is no magic that can fix a hardware failure.

Macbook Air shuts down if it is not plugged into the power outlet through the adapter. What is happening?

Problem description:
Mid-2013 Macbook Air 13 inch. Shuts down when unplugged from power adapter. It 1st started just shutting down intermittently on battery power. Sometimes when it powers back-up on the battery power only the fan would be blowing hard. But it is now at the point that if it is not connected to the power adapter it will not come on. I have tried resetting SMC and PRAM but to no avail. The battery is showing 100% charge with only 137 battery cycle count.
EtreCheck version: 2.0.11 (98)
Report generated November 6, 2014 at 1:58:37 PM CST
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2013) (Verified)
MacBook Air - model: MacBookAir6,2
1 1.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:23:26
Disk Information: ℹ️
APPLE SSD SM0128F disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Untitled (disk1) / [Startup]: 120.10 GB (87.15 GB free)
Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
/etc/hosts - Count: 5
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[running] com.kodak.BonjourAgent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.bombich.ccc.plist Support
[running] com.JavaW.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.kodak.KODAK AiO Firmware Updater.plist Support
[loaded] com.kodak.KODAK AiO Software Updater.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
Safari Extensions: ℹ️
Omnibar
Searchme
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Untitled: Disk size: 120.10 GB Disk used: 32.95 GB
Destinations:
Bogie Back-Up [Network]
Total size: 499.75 GB
Total number of backups: 11
Oldest backup: 2014-08-19 18:08:04 +0000
Last backup: 2014-11-06 18:51:38 +0000
Size of backup disk: Excellent
Backup size 499.75 GB > (Disk size 120.10 GB X 3)
Top Processes by CPU: ℹ️
      5% WindowServer
      0% fontd
      0% sysmond
      0% AppleSpell
      0% cloudpaird
Top Processes by Memory: ℹ️
82 MB Finder
60 MB Messages
60 MB WindowServer
47 MB Safari
43 MB mds_stores
Virtual Memory Information: ℹ️
1.32 GB Free RAM
1.79 GB Active RAM
545 MB Inactive RAM
634 MB Wired RAM
945 MB Page-ins
0 B Page-outs

Tried to reset SMC many times but it didn't change anything. The battery however is no longer being charged by the adapter even the computer is plugged in. The light remains orange. I restored to one of my earlier back-ups on time machine with Mavericks and the iWorm and malware returned. So, I decided to erase the hard drive and restore to original OS. I was able to restore to Yosemite. Here is the result of the latest estrecheck and battery info:
EtreCheck version: 2.0.11 (98)
Report generated November 7, 2014 at 7:30:08 PM CST
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2013) (Verified)
MacBook Air - model: MacBookAir6,2
1 1.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:8:24
Disk Information: ℹ️
APPLE SSD SM0128F disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Untitled (disk1) / [Startup]: 120.10 GB (109.93 GB free)
Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
Gatekeeper: ℹ️
Mac App Store and identified developers
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Untitled: Disk size: 120.10 GB Disk used: 10.17 GB
Destinations:
Bogie Back-Up [Network]
Total size: 0 B
Total number of backups: 12
Oldest backup: 2014-08-19 18:08:04 +0000
Last backup: 2014-11-06 20:25:00 +0000
Size of backup disk: Too small
Backup size 0 B < (Disk used 10.17 GB X 3)
Top Processes by CPU: ℹ️
      9% backupd
      5% WindowServer
      5% diskimages-helper
      2% mds_stores
      1% mds
Top Processes by Memory: ℹ️
180 MB com.apple.WebKit.WebContent
76 MB Finder
69 MB mds_stores
52 MB backupd
52 MB Safari
Virtual Memory Information: ℹ️
1.83 GB Free RAM
1.38 GB Active RAM
444 MB Inactive RAM
644 MB Wired RAM
1.86 GB Page-ins
262 KB Page-outs
At this point, the computer works fine with the adapter plugged in, light remains orange, the battery is not being charged. I believe the computer will still turn off once I unplugged the adapter from the computer although the battery is supposedly 88% charged.
If this is a hardware problem I hope it's just the battery. I believe that's the next step I have to take. Unless anyone has any other ideas.

I am having problems getting connection with my itouch. When I plug into the computer it just shows usb symbol.

My main concern is it is not connecting, and how to reset.

Welcome!
It would be very useful if you posted your Mac OS version, your version of Safari, and your model/version of iMac. That info can affect the responses you get. Also remember that there is a special forum area for Safari here:
http://discussions.apple.com/forum.jspa?forumID=876
People in that forum would need the same additional info.

Internet connection error saying a cable is not plugged into the network adaptor

Similar Messages

Maybe you are looking for