Internet connection loading, but don't know loading what...
I found my iphone was connecting to the internet and loading something, but i didn't open any apps , so what's it loading? will it cost me a expensive 3G bill?!
As long as an iPhone has reception - via a wi-fi connection or cellular, it is always connected to the internet. An iPhone is also designed to have a data plan with your cellular provider. If not, it is pay as you go for data uploaded or downloaded via the cellular network. Visual voicemail messages are downloaded to the iPhone via the cellular network only.
Do you have an email account or accounts that are automatically checked for new messages?
Similar Messages
-
Internet connection not working: don't know how to change network settings
I have a Macbook Pro with an internet connection that normally works fine. However, in my apartment, we are provided with a cable modem that has only one ethernet cable hook-up. Since we needed atleast two ethernet connections for two computers, we bought a switch that we hooked into the cable modem to give us extra ethernet ports.
Recently, while hooking up my ethernet cord to the switch, I have not been able to connect to the internet. Network Diagnostics tells me my Built-in Ethernet is working correctly, but Network Settings are at yellow, and my ISP, Internet and Server have all failed. I have followed all instructions to check my connections, and restart the modem, switch and computer many, many times but there is no problem with any of these things. The other computer connects fine on the switch and cable modem.
Additionally, under Network in System Preferences, I am being shown that there is an IP address and Subnet mask, so I am assuming there is nothing wrong with the cord, modem or switch (which work fine on the other computer), but there is no Router number, which seems odd. If it helps narrow things down, I am also trying to connect to the internet via DHCP rather than PPPoE, which is what I normally use.
I am guessing I must have accidentally changed something to do with my network settings and it is not adapting to the cable modem any longer. Unfortunately, I do not know how to do this, nor what to change it to if I had to. My landlady knows nothing about what kind of network settings I need to connect to the internet service provider. Other than calling Time Warner Cable (who provides the cable modem with ethernet hook-up)is there anything else I can do or should be considering in order to get my internet connection working?heather1688 wrote:
Recently, while hooking up my ethernet cord to the switch, I have not been able to connect to the internet. Network Diagnostics tells me my Built-in Ethernet is working correctly, but Network Settings are at yellow, and my ISP, +*_Internet and Server have all failed_*+.
I am having this problem if you find a fix please let me know. I have spent hours with apple trying to fix this. Im going on my third week with apple trying to fix this and i have a thread on this issue.
http://discussions.apple.com/thread.jspa?threadID=2104335&tstart=0 -
I downloaded ringtone from the app store,but then i had to change my phone. I thought i had backed up all of mydownloads but the ringtone did not load to the new phone. I have the receipt number in my e-mail but don,t know how to retrieve it
I downloaded ringtone from the app store,but then i had to change my phone. I thought i had backed up all of mydownloads but the ringtone did not load to the new phone. I have the receipt number in my e-mail but don,t know how to retrieve it
-
Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?
If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
Also mail not loading. The error report suggests that I look for updates from the app store?http://www.apple.com/support/mac/app-store/contact/
-
my 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort ... ran CleanMyMac and freed up about 30GB of space but didn't help ... ran AdwareMedic so that's been sorted but the other issues that came up on the EtreCheck I need help with however i can't figure out how to paste the results on this page
thanks thomas ... here it comes
EtreCheck version: 2.1.5 (108)
Report generated December 29, 2014 at 5:03:07 PM GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (17-inch, Early 2009) (Verified)
MacBook Pro - model: MacBookPro5,2
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1920 x 1200
NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:5:36
Disk Information: ℹ️
FUJITSU MHZ2320BH FFS G1 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
[redacted]'s world too (disk0s2) / : 319.21 GB (30.39 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-868
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Inc. iPhone
Logitech USB Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Configuration files: ℹ️
/etc/hosts - Count: 29 - Corrupt!
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Roxio
[not loaded] com.roxio.TDIXController (1.7) [Support]
/System/Library/Extensions
[not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0) [Support]
/System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns
[not loaded] com.kensington.mouseworks.driver.ADBID32Mouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID32MouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID4Mouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID4MouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWBluetoothHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWBluetoothOldHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWUSBHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.USBMouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.VirtualMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.VirtualMouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 (3.0) [Support]
Startup Items: ℹ️
AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
Firewall: Path: /Library/StartupItems/Firewall
RetroRun: Path: /Library/StartupItems/RetroRun
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.CS4ServiceManager.plist [Support]
[loaded] com.adobe.CS5ServiceManager.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.adobe.versioncueCS3.plist [Support]
[loaded] com.adobe.versioncueCS4.plist [Support]
[running] com.atomicbird.macaroni.launchd.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.prosofteng.DriveGenius.locum.plist [Support]
[loaded] com.skype.skypeinstaller.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[running] com.prosofteng.DGMonitor.plist [Support]
[running] ws.agile.1PasswordAgent.plist [Support]
User Login Items: ℹ️
CNQL1210_ButtonManager ApplicationHidden (/Library/CFMSupport/CNQL1210_ButtonManager.app)
System Events ApplicationHidden (/System/Library/CoreServices/System Events.app)
Mail Application (/Applications/Mail.app)
Firefox Application (/Applications/Firefox.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader 9/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Calendar Application (/Applications/Calendar.app)
Skype Application (/Applications/Skype.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
MouseWorks Background Application (/Library/Application Support/Kensington/MouseWorks.prefPane/Contents/Resources/Support/MouseWorks Background.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
EPPEX Plugin: Version: 3.0.0.0 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
ContentUploaderPlugin: Version: 1.2 [Support]
iPhotoPhotocast: Version: 7.0
RealPlayer Plugin: Version: Unknown [Support]
PDEPrint: Version: 2.0 [Support]
DirectorShockwave: Version: 11.5.2r602 [Support]
PDF Browser Plugin: Version: 2.4.2 - SDK 10.2 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
CANONiMAGEGATEWAYDL: Version: 3.0.0.2 [Support]
DivXBrowserPlugin: Version: 1.3 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Google Earth Web Plug-in: Version: 6.0 [Support]
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
User internet Plug-ins: ℹ️
QuickTime Plugin: Version: 6.5.1
fbplugin_1_0_0: Version: Unknown [Support]
Safari Extensions: ℹ️
Ultimate [Installed]
3rd Party Preference Panes: ℹ️
ASM [Support]
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Macaroni [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Destinations:
G-DRIVE Mini [Local]
Total size: 999.86 GB
Total number of backups: 7
Oldest backup: 2014-07-09 00:13:07 +0000
Last backup: 2014-12-10 22:18:57 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% firefox
1% mds_stores
0% mdworker
0% Skype
Top Processes by Memory: ℹ️
348 MB firefox
137 MB Skype
122 MB mds_stores
120 MB com.apple.IconServicesAgent
73 MB Dropbox
Virtual Memory Information: ℹ️
1.26 GB Free RAM
1.74 GB Active RAM
477 MB Inactive RAM
543 MB Wired RAM
503 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 29, 2014, 04:58:09 PM Self test - passed
Dec 29, 2014, 10:58:04 AM /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105804_[redacted].hang
Dec 29, 2014, 10:54:33 AM /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105433_[redacted].hang
Dec 29, 2014, 10:52:33 AM /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105233_[redacted].hang
Dec 29, 2014, 10:50:24 AM /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105024_[redacted].hang
Dec 29, 2014, 10:50:24 AM /Library/Logs/DiagnosticReports/Skype_2014-12-29-105024_[redacted].hang -
my internet connection is incredibly slow - I know it is not the fault of the modem as other devices are fast. This article was suggested to me as a solution. I think they were just trying to get me off their back. Anyone else experience this?
If Safari is getting very slow:
(Presumably you regularly empty your Safari cache by deleting the following file:
Home/Library/Caches/com.apple.Safari/cache.db
and clear your History)
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home-solutions ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network:please refer to this page: http://www.opendns.com/start/best_practices/#your_network and follow the advice given.
If you use a Router, make sure it has the latest firmware installed.
One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x as is described here:
http://support.apple.com/kb/TS3408?viewlocale=en_US
You can cancel DNS pre-fetching by going to Terminal and typing:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
You have to restart Safari for it to take effect.
If Safari seems to hang for ages:
If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
Open the Terminal from the Utilities folder in /Applications and type
killall -9 WebKitPluginHost
Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The later versions of Flash 10.1 onwards appear to have improved the situation somewhat, but haven't completed eliminated it.
For this and other reasons Apple switched their websites to HTML5 in January 2011:
http://www.appleinsider.com/articles/11/01/26/apple_revamps_its_public_website_u sing_html5.html
For Snow Leopard/Lion users this should also be read:
http://support.apple.com/kb/TS3408 -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
when I open safari I get a popup that says " this version of Safari doesn't support the community tool bar". Cure the ignorace someone - what's a community tool bar - apparently I have one but don't know what I'm looking at. -
You installed the Conduit spyware. To remove it, triple-click the following line of text to select it:
~/Library/Application Support/Conduit
Copy (command-C) the text to the Clipboard. Then select
Go ▹ Go to Folder
from the Finder menu bar and paste (command-V) into the box that opens. A Finder window may open with a folder named "Conduit" selected. If so, delete the selected folder.
Select Go to Folder again and enter:
/Library
From the folder that opens, delete the following items, if they exist. You may be prompted for your login password.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the folder. Now select Go to Folder one more time and enter:
/Applications/Toolbars
Delete that item. Close the Finder windows you opened. Log out and log back in. -
I have lost Lightroom 5 due to a crashed hard drive. I don't have a back up disc, and I dont think I have a key. I have a an adobe key recorded but don't know if it relates to LR5. I have an LR4 disc and key. LR5 is still intact and running on my laptop, but I need to use LR% on my desktop PC. I need an address to try a download so that I can try the key which might fit it. Any ideas how I can transfer the program (with key) from my laptop? Any other ideas?
John Carden <[email protected]>Just download and install.
you can find by internet search for "download Lightroom", or click here:
https://creative.adobe.com/products/download/lightroom
Note: trial software is same as licensed software, once you license it.. (I hope you still have the license key). -
I received a message on my iPhone 4 that has a video attached to it. I "saved video" but don't know where. How do I find it and send it to mi MacBook Air?
It would have saved to your camera roll. Connect the phone to your Air via a USB cable and then run Image Capture which is located either in your Utilities folder or Other folder, depending on what version of Mac OS X your are running. You will then see all the photos and videos stored on your iPhone and can then download them.
-
i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated
Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen. -
I don't think I signed in with the right button for my connection. I don't know how to change it
When I tried to connect I think maybe I used the wrong password and it won't let me connect. I don't know how to change it to see
Good choice! I have one installed in my 13" MBP. The installation is not too difficult, but it is not trivial. I'm pretty experienced with this stuff so just take your time and carefully follow the instructions. You'll be working with tiny little screws that are easy to drop and/or lose. I suggest using magnetic tipped tools. There are a couple of screws in some tight areas that are a little difficult to remove.
Be particularly careful to check all the snap-on cablings when you reassemble. There is one you don't remove during installation that is near the top part of the optical drive and covered over. When I was tugging on the drive to remove it I apparently popped the cable under the cover. Turned out it was for the WiFi and BT. I had to disassemble the back cover and look hard for something I couldn't see. I just happened to press on the covered area where the cable connected and heard the snap of it reconnecting. If it weren't for that I would have never figured out why my WiFi and BT stopped working! -
I purchased songs but don't know how to get them onto my ipod
I purchased songs on iTunes but don't know how to transfer them to my iPod Nano. Can anyone help?
Connect the iPod to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via option-command-S on a Mac, control-S on a PC), and then use the Music tab on the right-hand side of the iTunes screen to select and sync the music that you want on your iPod
Syncing media : http://support.apple.com/kb/HT1351 -
Hi, I tried to download a bunch of my favourite TV episodes. I was unable to get them all due to lack of storage. I increased my storage but the downloads didn't come. I tried deleting the already downloaded and viewed episodes but don't know how.
I'm wondering if I should increase my storage again but I'm not sure that's the issue.You need more storage on your iPad, however, it can't be increased. iCloud storage is ecternal to the iPad and is used for backup.
You need to delete some item on the iPad.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
There are some wireless external hard drives that can be used with the iPad.
Best iPad External Hard Drive Storage Options
http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
iPad Storage Solutions
http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
SanDisk Connect Wireless Media Drive http://www.sandisk.com/products/wireless/media-drive/
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Cheers, Tom -
I broke my iPhone 5 now using a 4 but don't know if or how to get my photos ect..from the 5 to the 4.can I do this and how plse help
Restore the backup of your iPhone 5 to your iPhone 4. It will contain your camera roll photos.
To do this, first make sure the iPhone 4 is running the same or higher version of iOS as your iPhone 5 was. If it isn't, you'll need to update it first. Then, to restore the iCloud backup, you'll have to begin by erasing the iPhone 4. If you have any newer data on the iPhone 4 that is not contained in the iPhone 5 backup, you'll need to save that first. When you're ready, go to Settings>General>Reset, tap Erase All Content and Settings, then go through the set screens on the iPhone 4 and when given the option, choose Restore from iCloud backup and follow the prompt, choosing the backup of your iPhone 5 to restore to. Be sure it is connected to wifi and your charger as it is restoring the backup.
Maybe you are looking for
-
HELP?? Iphone 5 8.1.2 keychain won't verify
PLEASE HELP?? Iphone 5 My keychain will not accept the numbers to verify even though I am getting the numbers text to me and I correctly put them in
-
Why are the nr of records in RSDDSTATBIAUSE and RSDDSTAT_DM are different?
For a given period I am trying to find out how many times BIA was used. First I went to RSDDSTATBIAUSE table for the Cube ZCUBE123 and check the number in the field BIA_USED. For the same period I went to RSDDSTAT_DM view, and checked the number of e
-
CS6, Font embedding and iBooks
Hi, It seems that there is a bug with embedded fonts in an ePub. Embedded fonts in an ePub created with InDesign CS6 do not show in iBooks. The "com.apple.ibooks.display-options.xml" file is included. If I use Sigil to obfuscate the fonts with the ID
-
OBYU HRK / SPECIAL G/L INDICATOR VIA RPCIPE00
Dear all, We use transaction OBYU, to post at vendors employees, using *0002 (not fixxed vendors). We cannot use special G/L indicator at this step. Are you aware of an exit or else, that we could you use, to make payroll postings via RPCIPE00, using
-
HT4489 format for contact files. Vcards are not loading (from T-mobile)
How can I add my contacts to the iphone 3? I have a t-mobile account and cannot load up the contacts at all