Internet connection lost after -Suy

I just went through a huge -Suy and I've lost the ability to connect to the internet.
I have had problems with my router lately (I've been having to restart it almost everyday to start dhcp on my pc's). However, I restarted it aobut 12 times this morning, and I can reach the internet on my webserver which wasn't upgraded recently.
The only major package upgrade that might be relevant that I can remember is udev.
I'm using the forcedeth module for networking, and I am getting a message in my 'everything.log' that says something to the effect of
Timed out while waiting for a response from a valid DHCP server.

Actually it's working just fine. For the first time ever udev has made a distinction between my two networking cards, and named my onboard networking card eth1. I changed it to use eth1 in rc.conf and now i get this
[root@sg01 sgillespie]# /etc/rc.d/network restart
:: Stopping Network [BUSY] down: error fetching interface information: Device not found
[FAIL]
:: Starting Network [BUSY] eth1 Link encap:Ethernet HWaddr 00:50:8D:E9:10:EA
inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::250:8dff:fee9:10ea/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:140 errors:0 dropped:0 overruns:0 frame:0
TX packets:158 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:62027 (60.5 Kb) TX bytes:21387 (20.8 Kb)
Interrupt:17 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[DONE]
What is going on?
EDIT: Once again, it's working. I forgot to change the other references to eth1, so no problem now. Life goes on...

Similar Messages

Wireless Internet connectivity lost after sleep

I've got a problem where I keep losing my wireless network connection after going to sleep.
The situation is that I'm connecting to my university's secure network. I have the credentials saved on my MacBook. When I need to go and leave my computer on my desk, I go back to the login window, and close the lid. When I come back and open it again, I'm instantly asked for the network password, at the login screen. Regardless of whether I enter it or dismiss the dialog, I'm unable to get a connection automatically after I resume my user session. There's an exclamation mark on the network icon and it says that there's no internet connection on the menu. When I click on this warning, I'm asked to repair the network connection and re-connect to it. This works, but I'd much rather that this be done automatically. Is there no way for me to resume connectivity after waking up my MacBook without having to manually re-connect?
Thanks in advance for any suggestions.

The problem's still happening in 10.6.2. I lose my Internet connection when I go back to the login window, then close the lid on my MacBook so that it goes to sleep. When I awake it, and log back in, I'm shown as being connected to the network, but not to the Internet. I have to manually re-connect.
When I just close the lid without exiting to the login window, it appears that my Internet connection is re-established automatically, though, on re-awakening. I'm puzzled as to why this is occurring. It looks like a bug to me.

WiFi Internet connection lost after iMac wakes up, what to do ?

Hi,
I used my iMac for a while with an older D-link product and Internet connection was fine. I purchased a new D-link product and whenever my iMac goes to sleep and wakes up again, I lose INternet connection although my airport icon still recognizes the network and says signal is at full strength. Apple Care can't help me.
I have a PC directly connected via wire to the same router and Internet connection is flawless so my ISP is not the problem. I use cable modem.
No it got worse. I start up my Mac, have connection but if I stay to long at the same webpage and then try another page, somehow it stalls!! Very frustrating. Anyone any ideas ?
Thx&Rgds

To Apple Discussions!
"I purchased a new D-link product"
Have you contacted the manufacturer to determine if the problem is with them?

Internet connection lost after browsing the internet

Hi, I am fairly new to the mac world. (less than two years) And I have a problem that I was hoping someone can help me with.
I have a Power mac G5 dual processor, with Mac osx panther installed. Everything works great, except when I try to browse the internet. For some strange reason it will drop my connection and to bootm I also have a G5 server that I am connected to, but as soon as I lose my internet connection I also lose my connection to my server. Now I know it can't be the router since other computers keep their connection while mine drops randomly.
Our office has a basic setup, computers and server plugged into a switch, the switch goes to the 2wire (router/DSL combo) device. The firewall is within the 2wire and the server's and computers' firewall are disabled, since the 2wire has the firewall protection the whole subnet.
Please help
Thank you
G5 Server Mac OS X (10.3.9)

I had this same issue on an Acer Aspire 5520 laptop with an atheros chipset for which I was using ndiswrapper. Long story short I downgraded to kernel 2.6.24 and that fixed the problem .
Sorry not much help...I have no idea where the culprit is, but it is a very annoying problem.

Internet connection lost after security update HELP

Help, After i installed security update suddenly recently i couldn't connect to internet. But i can see my airport connection in the airport utility and it doesn't have any problem with it. I directly connected the cable to my imac(detaching the cable from airport and connected it directly to imac machine) and still I cannot connect to internet. I don't know what happened, can somebody help me and tell me what's wrong with my mac.

try the firewall settings in the system prefrences.
if not it could be your ISP.
JS

Internet connection lost after machine sleeps or idle for a while

I upgraded my 24" iMac, 2.16 to a 27" iMac I7. I am now having probles remaining connected to the internet after the machine is idle for a while. I am using a Time Capsule and cable router and have been using the same two devices before the ungrade in my computer. I am also using OpenDNS, again as before. My computer is wired to the TC via ethernet and my wife's computer is wireless. She has no problem. She does not lose connectivity at all on her iMac 24". The drop occurrs time to time after the machine sleeps or sits idle for a while. I know Ive seen various threads about connectivity issues but can't seem to find an answer. Help is appreciated.

I had a very similar problem which I fixed like this:
1) Move the file /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist to your Desktop.
2) Reboot
Snow Leopard will rebuild this file from other info.
This sorted out all my won't connect/loses connection issues.

Internet connection lost after start up or restart

Hello,the last few days I noticed that after a restart or start-up I click on Safari or Firefox 3 and I do not have a connection for about a minute or two.What could be causing the delay with the connection,I have a high-speed cable modem with wireless router to my iMac.wireless is turned off seeing I do not move it around the house.Any help would be much appreciated,Thanks.

I figured it out, somehow a few router settings were changed. Thanks anyways all
Message was edited by: RMT07

I can't get internet connection even after wi-fi set is done with cisco

I can't get internet connection even after wi-fi set up is done with cisco

Not sure what Cisco is but if you are having problems with your wifi this link might help
On the iPad... tap Settings / General / Reset / Reset NetworkSettings.
Or here is a link that might help http://support.apple.com/kb/TS1398

WiFi Internet connectivity problems after upgrade to 10.8.4

After upgrading to MacOS 10.8.4 I am facing regular interruptions to my WiFi internet connectivity. Periodically the internet connectivity is lost and the only way to fix the problem is to turn WiFi off and on again. This happens frequently when I am downloading files at using big bandwidth (more than 1.5-2 MB/s). If I use assist me on the Network preferences tab, it displays an ISP error when the connectivity is down, however I am certain that I do nota have any kind of ISP or router issue since at the same time I have WiFi internet connectivity from my iPad mini, iPhone 4S and Samsung Galaxy S3. Therefore it should be a 10.8.4 issue

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)

Internet Connect lost connection to ethernet

After installing 10.4.4, Internet Connect can't connect because it seems to have lost contact with my PCI ethernet card. It only shows Built-In ethernet which died awhile back. System Profiler knows the card is there is there. Both Network and Alltel say it is connected. Apparently Internet Connect is the culprit. Can I fix or get around it? HELP!
Everything else seems to work by the way.

System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Ethernet
Click the Assist Me button
In the popup window click the Diagnostic button.

Internet connection lost when the phone is used

Have had BT internet for well over a year with no problems, but over the last few days I have experienced problems with losing the internet connection. I have now pinpointed it to the fact that as soon as the phone is used (receiving or making a call) the internet connection is lost. Once the phone call is finished, it can take up to a minute before the internet connection comes back (ie. the Broadband sign on the hub is yellow while there is a problem, but after a minute or so after the call is finished it turns blue again). Anyone have any ideas what could be causing this? There has been no recent changes to hardware or equipment that could be the cause of this.
Thanks :-)

Probably a line fault, however you need to check that the fault is still present when you plug everything into the master socket, just to prove there is no problem on your internal wiring.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

JCoRfcProvider: connection lost after a while

I have created a couple of EJBs and propagated them using JCoRfcProvider to an ABAP system, so that the backend can reach them. But after a while the backend looses the connection to the JCO server process: "program XXX not registered". After a restart of the RFC destination using Visual Admin everything is fine again. It seems that the connection between the systems is closed when it is idle for some time.
The <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/760e4248fc5133e10000000a155106/frameset.htm">documentation</a> says:
If an RFC connection is interrupted or terminated, the JCo server automatically
registers itself again on the same SAP gateway under the same program ID.
Obviously, this automatic restart is not working, as the connection stays disabled once it has failed.
Is there a parameter I missed? Is this a JCO bug? How can I get this thing stable?
Best regards,
Frank

netsurferdude2 wrote:
Hi all,
Lets start off with some info. I have a XP machine with a WRT310N router but the connection to the router from my computer is wired. I have other computers on the network(a wired XP work comp and a wireless vista laptop). I do have linksys Easylink Adviser but it is was to laggy and doesnt work half the time so I dont use it. My antivirus software is Panda Internet Security 2008.
My problem has only occurred twice but it has prevented me from trying to make a server again. I have been wanting to host a dedicated counter strike source server in steam for awhile.
I followed all the port forwarding directions. I get the static ip set up and I open the 27015 port for steam.
I will make a dedicated server and have a few people join and then I follow. Everything works perfectly for about 5 minutes and then my friends are dropped from the server due to loss of connection. I am still in the server but no one can join or even get info on it meaning the server is not responding.
I then close out of steam and the server and find I have lost my internet connection. I can not visit any websites, I can not do anything in steam, I cant log onto aim, xfire or anything.
Now my local connections dont say "Connection lost" like they do when the router is shut off or if I lose the actual connection.
The only way it seems I can get my connection back is by unplugging the router, waiting 20s and plugging it back in. Then I have to wait about 5 more mins and it will just all of a sudden work.
Does anyone have an idea of what is happening? Is it the router? My antivirus/firewall?
Thanks in advance
Greg
Message Edited by netsurferdude2 on 08-25-2008 09:26 PM
Hi
Try disabling the firewalls and access server side.
see if any change?
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

Wireless connection lost after standby !

My ibook G4 has a strange problem. Everytime, I restart the computer, the wireless internet works fine. However, just after every short standby or disconnection, the internet connection always got lost.
The airport says it is connected, while the network status says it is connected to my network, but airport cannot find the IP address and cannot connect to internet.
Any help is greatly appreciated.

Are there other (stronger) wireless networks in your area (when you click on the airport icon, in that case you should see a list of wireless networks in the drop down list)?.
You may want to switch your airport settings to always connect to yours instead of 'connect automatically'.
iBook G4 Mac OS X (10.4.7)

Internet connection drops after 1 minute

Using iPhone 4, version 4.3.3 - I have been using wi-fi connectivity without issue for several months at home and other public locations. Currently having issues at new work location with keeping a persistent internet connection using company wi-fi. After device wakes up, I'm able to browse the internet without problems for 1-2 minutes, then when loading a page, will get the error that Safari can't open the page because no internet connection is available. I still have connectivity to the wi-fi network, and can get email from company Exchange server, but can't get access to anything past the company network. I don't understand why it will work for a couple of minutes and then lose internet connection.
Any ideas?

Hello and thank you for the response. The only way I can get these iMacs to stay connected to the internet is via Static IP. The previous post states that static doesn't work but I didn't fill out all the fields correctly, like DNS and search domain.
Both Ethernet and Wi-Fi pick up an IP address via DHCP and after a few minutes the IP is dropped then a self-assigned 169 address appear. With Static IP, we're good to go.
I've tried DHCP with manual address.
Editied the location on network preferences.
I've disabled "use passive FTP mode"
I connected Windows machines to the same network port as these iMacs and there are no issues.
OSX 10.7
Thanks again,
Oz

Connection lost after 2 songs have been played.

Everytime I play songs from my macbook to ATV2 it plays only 2 - 3 songs then it hangs. I just got 4 songs out of it. I have to disconnect my home share and re connect to start it again. Any ideas why this would be happening. I've browsed the forum to see that other people have this issue, but there is no answer as to what is causing it. Surely its not the router as I have a new router. ATV2 streams movies without any interruption so I dont get why it happens to songs through itunes.

netsurferdude2 wrote:
Hi all,
Lets start off with some info. I have a XP machine with a WRT310N router but the connection to the router from my computer is wired. I have other computers on the network(a wired XP work comp and a wireless vista laptop). I do have linksys Easylink Adviser but it is was to laggy and doesnt work half the time so I dont use it. My antivirus software is Panda Internet Security 2008.
My problem has only occurred twice but it has prevented me from trying to make a server again. I have been wanting to host a dedicated counter strike source server in steam for awhile.
I followed all the port forwarding directions. I get the static ip set up and I open the 27015 port for steam.
I will make a dedicated server and have a few people join and then I follow. Everything works perfectly for about 5 minutes and then my friends are dropped from the server due to loss of connection. I am still in the server but no one can join or even get info on it meaning the server is not responding.
I then close out of steam and the server and find I have lost my internet connection. I can not visit any websites, I can not do anything in steam, I cant log onto aim, xfire or anything.
Now my local connections dont say "Connection lost" like they do when the router is shut off or if I lose the actual connection.
The only way it seems I can get my connection back is by unplugging the router, waiting 20s and plugging it back in. Then I have to wait about 5 more mins and it will just all of a sudden work.
Does anyone have an idea of what is happening? Is it the router? My antivirus/firewall?
Thanks in advance
Greg
Message Edited by netsurferdude2 on 08-25-2008 09:26 PM
Hi
Try disabling the firewalls and access server side.
see if any change?
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

Internet connection lost after -Suy

Similar Messages

Maybe you are looking for