Internet connection lost using hughesnet modem and Airport in Time Capsule

I recently got Hughesnet which is the only available high speed internet at my home.
The problem I'm having is that my wireless connectivity is lost to all devices requiring me to unplug and plug back in my Airport...at which time I have internet again until it goes out again.
The problem does not appear to be an actual lost internet connection through my Hughesnet modem.
Any thoughts on how to fix this problem?  I have reset my Airport to factory settings and named it TCwireless for simplicity.
OS X 10.9.4
3.2 GHz Intel Core i5
8 GB 1600 MHz DDR3

Hey there waltpe,
Here are a couple of articles for you that will help you troubleshoot the connectivity of your AirPort router:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Thanks for using the Apple Support Communities!
Cheers,
Braden

Similar Messages

  • New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

    new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

    See the info here about sharing or using the TC for data.
    Q3 http://pondini.org/TM/Time_Capsule.html
    It is extremely important you realise.. the Time Capsule was never designed for this.
    It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
    It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
    The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
    iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
    Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

  • I had to replace my cable modem and now my Time Capsule only talks to just the one Mac Air.  My other wifi devices (another Mac Air, iPad, and iPhone) can't get on the wifi.  Any suggestions?

    I recently replaced my cable modem and now my Time Capsule only works with the one Mac Air and not my other devices (another Mac Air, iPad, and iPhone).  Any suggestions?

    It sounds like you have gone from a cable router with the TC bridged to a cable modem with no router.. so the first device to connect pick up the IP address. Did the cable company give you the same model?? Check if it is a pure modem or a modem router.. and what the last one was.
    Anyway.. you should redo the setup.. do you have any computer with ethernet?? Did you buy a USB to ethernet adapter for one of your airs.. very hard to do setup without ethernet.
    Also download the new utility.. with the old style.
    http://support.apple.com/kb/DL1482
    If you happen to be on Lion.
    Redo the setup and make sure you setup correctly to router mode if the cable modem has no router or bridge mode if it is a router.

  • Western digital hard drive worked fine on my pc. I connected it to my macbook and it began time capsule, but now I cannot see any of my files on either my mac or pc?

    My Western digital hard drive worked fine on my pc. I connected it to my macbook and it began time capsule, but now I cannot see any of my files on either my mac or pc? Please help

    Hi there,
    Thanks for the reply.
    I plugged my usb hard drive in and what looked like time capsule started automatically on my mac. The same hard drive worked perfectly on my laptop pc before, now it connects but isn't visible in my computer.
    My second hard drive works perfectly well on both my pc and mac, so I am not sure what has happened to the one in question.
    Regards,
    Stephen

  • HT204057 new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

    i just bought a new mac air and the new airport extreme time capsule im would like to know how to use the time capsule as storage for my pics and videos as the mac are has low storage space can any one walk me through this process?

    See the info here about sharing or using the TC for data.
    Q3 http://pondini.org/TM/Time_Capsule.html
    It is extremely important you realise.. the Time Capsule was never designed for this.
    It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
    It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
    The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
    iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
    Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

  • Connecting Motorola SB6121 Cable Modem and AirPort Extreme

    I moved into a new house a couple of days ago so of course the first thing that I needed to do was get the home wireless up and running. My ISP is through Comcast. I purchased my own cable modem (Motorola SB6121) instead of renting and used my own AirPort Extreme as the wireless router.
    First, if you're purchasing your own cable modem, you will need to contact your ISP and provide them with the HFC MAC ID on the cable modem. Once you've gone through the motions, you will be able to connect your Mac (in my case Macbook) directly to the modem via ethernet cable and access the internet.
    Issue:
    When I connected the SB6121 to the AE, I could connect wirelessly to the AE, but I did not have access to the internet. So, basically the SB6121 and the AE were not talking to each other despite being physically connected via ethernet cable.
    Solution:
    After days of searching for online answers and forums (and trying different solutions) I was able to successfully get everything up and running. Make sure that you have 2 ethernet cables available.
    Here are the steps.
    I restored my AE to factory settings just to keep everything simple. Here are instructions: http://support.apple.com/kb/HT3728 Once you've restored your AE, make sure that both the AE and the cable modem are unplugged from their power sources.
    Plug in the power to the SB6121.
    Connect your SB6121 directly to your laptop via Ethernet cable. Test to ensure that you have internet accessibility by going to any website.
    Remove the ethernet cable from your laptop and plug it into the "internet in" jack in the back of the AE.
    Power up the AE.
    Connect your laptop to the back of the AE using ethernet cable #2.
    Launch a browser. You should now be able to successfully connect to any website.
    Assuming that you reset your AE to factory settings, it should just be broadcasting the generic "Airport Extreme" SSID. Disconnect the ethernet cable and connect using wireless to the SSID. Launch a browser and you should be able to connect to the internet.
    You can now use the AirPort Utility to configure the AirPort settings.
    I assume that this solution would work with any of the base stations.

    I was having the exact same issue tonight.  Just purchased the AE Model A1408 and haven't been able to maintain an internet connection on my iMac whenever I tried hooking it up via the Airport Utility application.  So after I had the SB6121 connected to the AE and the AE connected to my PC with no luck, I then went to the Network icon in System Preferences.  Clicked on "Assist me...".  Then clicked on "Diagnostics..." and followed the directions which basically had me first power down the SB6121 modem and power it back up.  Then I powered down the AE router and powered it back up.  At that point I was now getting an internet connection.  I then took my ipad 2 and went to the Wi-Fi settings and noticed it was asking me to setup a network through my AE.  I selected that and went through the simple steps to set up the network and password and now it all works.  I am a novice so don't ask me why but I now get a green solid light on my AE.  I can connect other devices wirelessly. I can still access the internet on my iMac.  For whatever reason, using the Airport Utility on the iMac doesn't work in my case and using my ipad to set up the wireless network did the job.

  • Internet connection sharing with a modem and WRT54G

    I currently have dial-up at my location, I will have dsl when i move down the street in about 2-3 months. My question is, I would like to hook up my WRT54G router to my desktop computer that has a external modem hooked to it. I would like to be able to use my laptop from my shop location out in the backyard without having to tie myself into the computer in the house. How can I be able to use the wireless link between the laptop and the router and have it dial the modem on the desktop so I can access the internet out in the shop? I read that this can't be done if using dhcp. I can see both computers hard drives on each machine. Would anyone know of any software that would allow me do this? Thanks, Joseph

    Configure WRT54G as access point only, so labtop can communicate with desktop that has Internet connection. Enable Internet Connection Sharing on desktop to share the Internet connection to labtop.
    Hope helps..
    picoHat

  • Modem to switch to time capsules

    I have my modem in the basement. I ran a ethernet cable through the floor and to my time capsule that is in my living room. I want to put a switch between them so i can connect an older time capsule to it. I want that in the basement because I have two printers, hard drives and such and don't want it all in the open. I still want to be able to backup to the older time capsule. So, is it possible to have modem to switch to two time capsules? I should note that I tried this with one TC and could not get internet. I have no experience with networking so is this setup possible?
    Thanks

    I want to put a switch between them so i can connect an older time capsule to it.
    Sorry, but you cannot locate a switch between a modem and a router (Time Capsule). The switch must come after the router on the network, not before it.
    The reason for this is that the modem only has one IP address to deliver. If you place a switch between a modem and other Ethernet devices, it will be a matter of chance as to which device receives the IP address. Other devices will not be able to connect to the Internet.
    Your network should look like this:
    Internet > Modem > Time Capsule > Switch > Other Ethernet devices

  • Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

    Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • Connecting wireless modem and airport express

    I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
    Mac

    Hi - I have a similar issue.
    I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
    All three are wirelessly connected to my HG556a Huawei WiFi Router.
    The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
    The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
    I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
    Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
    It still dissapears from available options in iTunes and AU. ideas?

  • Acouple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since with Apple

    A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Power backup for dsl modem and Airport Extreme

    Does anyone here have backup power for a dsl modem and Airport Extreme that is successful? I have a name brand power backup and when the power goes off both the dsl modem and Airport Extreme remain on; however, the network connection is lost so the fact that they remain on doesn't help. I have been unable to find anything about this problem on the internet generally and consultation with a well-known squad person has not helped. Any thoughts about this will be welcome.

    Yes, I agree. But since the backup power keeps the modem powered, why doesn't the dsl connection continue? The squad person I talked with told me that the speed with which the backup power units replace power during an outage is about the same across different backup brands/units (I don't recall the speed but it was in milliseconds) and should be quick enough to retain the dsl connection. Doesn't happen.

  • Using Huawei E220 and Airport at the same time?

    I use a Huawei E220 USB-modem to connect to internet. I also have a Time Capsule with a wireless network, but it's not connected to internet.
    When I acivate Airport to connect to Time Capsule, Internet Connection decides to overlook my Huawei connection and dub the AirPort network as my internet connection. Even if there is no internet there. How can I convince Internet Connection to use the Huawei for internet if it is connected?
    I don't have this problem on my 10.5 MacBook. Thanks! Joachim

    Use the options in System Preferences -> Network to set the service order (via the buttons in the lower left corner) such that the USB modem is above the AirPort interface. That way the OS will use that interface first while still using the AirPort to talk to the Time Capsule on its separate network.

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • My network, based on modem, wifi router (Airport Extreme),Time Capsule and Airport Express simply disconnects with all the lights green on the modem and Extreme, but the other components offline, 5 or so times per day.  I suspect the Extreme.

    I have a Cisco System3 modem, feeding an Airport Extreme, which connects wirelessly a Timecapsules and an Airport Express both of which extend the network, ie send out more WiFi signal.  The system worked well for a long time, say a year and a half and then it started dropping out.  All the lights on the modem and airport Extreme stay green, but the other two components are blinking yellow. I've tried limiting the channels, but there are few sources in my neighborhood.  I have tried resetting the Extreme which worked for a week and now it's back to its random disconnect behavior.  I have read some of these blogs and no one seems to know what to do, especially not Apple.  Do I just get another router or what?  What do I lose if I use a non Apple router and what would you suggest?

    Welcome to the discussion area, Junkcanoe!
    I don't have a setup like yours, but might be able to offer some assistance.
    Basically I have two jacks, a TC and an AE and I'd like to create a roaming network. Both of them are set to bridge mode with the same SSID, WPA2 security, same password, etc.
    This would be the normal way to set up a roaming network, but the wild card here is that we don't know anything about how the main router that supplies the ethernet connections (valid IP addresses) to the condos might be configured.
    For example, most apartments, hotels, etc that provide ethernet jacks usually limit the number of devices that can connect to each jack. Hotels tend to limit this to one or two devices. I counted six devices that you say will work properly plus a few more. Since you have two separate ethernet jacks, you may be looking at a situation where each jack is allocated a total of 4 devices, or valid IP addresses.
    The bottom line here is that we won't be able to make much progress until we know more how the main router there has been configured. Is it possible for you to ask the complex manager (who will probably need to ask the IT guy) how many devices are allowed to connect per ethernet jack? Another way to ask the same question is how may valid IP addresses will each ethernet jack allow?
    If you can, could I ask you to perform an experiment? Rather than have both the AirPort Extreme and Time Capsule each connect to a separate ethernet jack, can you temporarily move one device near the other and connect them together using an ethernet cable? (Or, use a long ethernet cable if you don't want to move either device) LAN <-> port on one to LAN <-> port on the other. In other words, you'll only be using one of the ethernet ports in the condo for this experiment.
    Any difference in performance or number of devices allowed to connect?
    Message was edited by: Bob Timmons

Maybe you are looking for

  • Problem in Mail with signatures

    Has anyone experienced this? I'm running Leopard and using two different user identities("A" and "B" on my macbook. In one identity "A", I use signatures in Mail for two different email accounts. Sometimes I log out of identity "A" and use Mail in id

  • Does this keyboard's F1-F12 rows work for Mac?

    It says it's for Windows and Mac but I have my doubts. I have a Windows keyboard which works fine except that most of the F-row keys don't do anything. http://www.amazon.com/Kensington-64338-Comfort-Type-Keyboard/dp/B0000C4DX6/ref=s r17?ie=UTF8&s=ele

  • Smartforms symbol not found?

    Hi experts, I am facing a problem with smartforms, hopefully anyone of you got a solution on this. The call of my Smartforms FM results in a exception 1 --> formatting error. Smartforms_trace says:   MSGV1: GV_PRINT-AMOUNT        symbol GV_PRINT-AMOU

  • Copy FTP files according to modified date and time

    Hi all, I am creating an application where I need to copy the latest file created only from a remote FTP location. So for example, if my remote/ftp location contain some folders and some files, it would list only the file which was modified recently.

  • HELP Missing ocx controls

    Re: WVC200 HELP, inadvertently (stupid me!) some/all of the Active-X controls got deleted from my IE7 Add-ins. Missing are: NetCamPlayerWeb... .ocx PlayerPT.ocx PTControl.ocx and maybe others... I thought it would be a simple job to reinstall them. I