Internet Connection no longer working with WRT54G V3 Router

I have had a WRT54G V3 router working successfully for a number of years now with a couple wireless PCs through a cable modem with Comcast as my ISP.  All of a sudden yesterday, neither PC could access the internet.  No changes had been made to the router.
I contacted Comcast and they of course had me hard-wire one of my PCs into the cable modem.  That worked and I was able to access the internet.  However, when I tried to put the router back in place (in either a wired or wireless fashion), I could not access the internet.
I've tried following the online Linksys troubleshooting documention.  The lights that should be lit on the router are lit.  I can access the router setup web page which shows the settings still intact.  I've tried going through the power sequencing to no avail.  Comcast says my router is the culprit of my problem, but I don't know why it would all of a sudden stop working.  My wireless printer still works so it detects a signal and my PC shows it's connected, but no internet access is possible.
What do I need to do?  Are there any other diagnostic tools available?  The Chat people won't help because I'm out-of-warranty. 
Solved!
Go to Solution.

Here's a trick on how to do the reset on the router.
http://compnetworking.about.com/b/2009/03/11/the-30-30-30-hard-reset-rule-for-routers.htm
cheers!
Yesterday is history. Tomorrow is mystery. Today is a gift.

Similar Messages

  • Comcast Internet connection no longer works with Airport Express

    This is a little bit out of my depth, so I'm hoping that someone can help me.
    I've been accessing Comcast High Speed Internet through my Airport Express connection for more than a year. Things were great until last week when my connection stopped working. The only way I'm able to access the internet is by connecting my iBook directly to the modem.
    I tried resetting my Airport Express. I even did it manually so I could manually enter the DNS Servers and Domain Name. That worked for about two days, but now I'm back to where I need to connect directly to the modem.
    Maybe there's something I'm not doing correctly. I'd appreciate any help I could get.

    gerasco, welcome to the discussions,
    It sounds like you are doing everything right and the AirPort Express may be acting up.
    Normally, you would reset this device by plugging it in and holding in the reset button until the amber light flashes rapidly.
    This time, try a hard reset as follows:
    Unplug the AirPort Express
    Hold in the reset button and CONTINUE to hold it in as you plug in back in to power
    Release the reset button after approx 10 seconds.
    Setup the Express again and see if that helps. If you continue to experience problems with the Express, it is likely that it will need to be replaced or repaired.
    Please post back on your progress.

  • TC 2 TB A1409 Wan internet connection no longer working but light is still green?

    TC 2 TB A1409 Wan internet connection no longer working but light is still green?
    My TC and modem have been up and running for at least the last 2 years without any issues.
    It recently started acting up and I would have restart it as I had no internet access. All of a sudden My TC stopped connecting to internet regardless of restart. Utility shows i have no internet connection. I had all the correct green lights on my modem. I figured it might be the modem and connected directly to single ethernet port in modem to my mac book and it worked. When I reconnect modem to TC and restart Modem, TC still shows no internet connection in utility even though I'm getting green sync light on TC.
    Help Please.
    I'm out of warranty, I have not reset to default yet, Im not sure if I will loose my TC back up data.
    please advice
    Remy

    The Gen4 has some nasty faults.. mostly unrepairable...
    If the WAN is gone it becomes pretty well useless at least in its current role as router.
    You might still be able to plug it in by ethernet to a LAN port in bridge.
    Do try a full factory reset.. always worth a go.
    No files will be lost on the hard disk.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Check the ethernet LED is going on.. both on the modem and the TC WAN port.
    Do you have any applecare on a computer? If so it might cover the TC.. the rules are complicated but if the TC was bought within 2years before or after the computer it is covered up to max of 3years. You can still get coverage therefore if the TC is over 1 year but less than 2 years by buying applecare now on a computer or an Apple TV which is not too expensive. You can sell off the Apple TV without even opening it.. but use the applecare on it to get your TC replaced.
    Only the very first Gen4 will be up to 3years.
    Did you have a lightning storm or something btw?? Sometimes the modem can survive and pass the parcel to the TC which seems rather fragile.
    There is also a trick to test..
    You must have v5 airport utility.. any older Macs, or windows computer you can load on 5.6 utility .. even dual boot/parallels mac.
    Go to the WAN setup.. and set the ethernet port to 10mbit half duplex.
    Sometimes a damaged port can still manage the slowest speed.. by magic.

  • Laptop internet connection no longer works after adding Time Capsule to network

    The other day I was setting up my Time Capsule for the first time at my new apartment (after having it in a box for months). I've got internet access through my apartment, so I haven't needed to use it as a router like I did the last time I used it. Also, the router is in another tenant's room. So I opened Airport Utility and adjusted the settings to add the Time Capsule to the network. After doing this, my laptop has lost its Internet connection. I can still connect to the network and my iPad has had no issues connecting to the same network and using the Internet, but the Internet won't work on my MacBook Pro (2006 model).
    Since then, I've plugged an ethernet cable between my laptop and Time Capsule so I could find it on Airport Utility and change its settings to connect to the laptop via Ethernet. Also, I called my landlord and got the router reset.
    I know the Time Capsule/Airport Utility is involved because the Internet connection died as soon as I tried adding my Time Capsule to the network.
    Any suggestions?

    I am having the same problem.  It worked fine (connecting my iOS devices to my macbook pro using internet sharing) until Lion.  Then it all went to ****.

  • My internet connection no longer works

    I'm a newbie as regards MACs. I have a MBP and it has been working OK on the internet. I have a Netgear DG814 router and a LAN connected with my PCs. Internet is OK on the PCs (I'm using one for this post).
    It was OK on the MBP until I tried to set up WEP on the airport. It worked but, like everyone it appears, my connection kept dropping off.
    So I went back to a wired connection. This used to work but now it doesn't. I can see all the PCs on the LAN from the MPB. I can see the MacBook from the PCs. I can connect to the router as administrator, from the MPB. It doesn't appear to be a DNS problem as I can connect to Apple by browsing to http://17.254.0.91 from Safari.
    However, the page takes about an hour, or more, (this is not an overstatement) to be painted. It takes a matter of a couple of seconds to do the same thing from the PC!
    I'm using fixed IP addresses on the LAN.
    I used to know my way around Unix once upon a time, but that was 15 years ago! It's amazing how much you can forget in that length of time.
    Help . . . . what do I do ????
    Macbook Pro   Mac OS X (10.4.8)  

    Hey Bob - check to see if UPnP is enabled in your router, and if so disable it.
    I've now solved a half a dozen local 'erratic wireless' problems on MacBookPro's by disabling UPnP in our routers (all of them Linksys, for what it's worth). It may be that our problems are not your problems, but it's worth a shot.
    [Other details: using a Core Duo MBP 1.83 in 10.4.8 via 802.11g, along with a bunch of other wired and wireless Macs, PCs, a Linux machine or two, and my Nokia 770; all auth via WPA2; WRT54GS v 2.2 firmware at 4.71.1; in each case, it appears the MBP's interaction with the router's UPnP was preventing regular communication with other devices on the network.]
    Another suggestion: there is a MacOSX build of Ethereal floating around somewhere - it may be worth finding it, running it on your MBP to see what packets are hitting the interface. Given your explanation about extremely slow rendering, perhaps you have something on your network that's impairing throughput. In the same vein, you might google MenuMeters and install it for a constant display of throughput as it relates to you MBP (be sure to go into the settings for MenuMeters to enable each of the options it presents).
    MacBook Pro CD 1.83   Mac OS X (10.4.8)  

  • After installing Lion, sharing my USB internet connection no longer works on my iPhone4.

    I have a USB internet device and have been able to share that connection with my iPhone without problem, until installing Lion.  I searched the web, and someone suggested changing my encryption to 128, which I did.  For a few hours that worked, but now it's not giving me a decent connection.  Anyone know why and what the solution is?  Thanks.

    I am having the same problem.  It worked fine (connecting my iOS devices to my macbook pro using internet sharing) until Lion.  Then it all went to ****.

  • LLoyds internet banking no longer works with firefox, ok with IE

    i have been happily using Firefox and LLoyds banking for years. now it does not work. i get past login screen to "my accounts", which correctly displays balances etc. (There are some spurious characters a third of the way down on top of the usual layout). As soon as i try to actually do anything else, the page resets to the login page.
    This has been posted a year ago by someone else and i have tried what was suggested ie:
    1) clear cache
    2) delete cookies for the lloyds pages
    3) disable add-ons
    But i still get the problem. The website is fine using IE but i dont want to!!
    thanks

    Please provide a screenshot of that message.
    https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem <br />
    It is best to use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed a maximum file size of 1 MB.
    Then use the '''Browse ....''' button below the '''''Post a Reply''''' text box to upload the screenshot.

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why does Apple iPad Camera Connection Kit no longer work with iOS8

    Why does Apple iPad Camera Connection Kit no longer work with iOS8?

    The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised

  • HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    Giancarlo Messalli wrote:
    1) are you sure a reset holding the reset button will not delete my data?
    Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
    For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
    2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
    Thank you again
    I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
    Here is the Apple info on reset.
    http://support.apple.com/kb/ht3728
    And here is the quote from the horse's mouth so to speak.
    Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

  • Internet sharing no longer works after 10.5.3 upgrade

    I'm aware that a number of people seem to be having wireless networking problems after upgrading to 10.5.3. I apologise if this has been covered somewhere else, but after trawling the forum I haven't been able to find any posts which deal with my specific issue. So any suggestions would be gratefully received...
    My 24" 2.8GHz Intel iMac (purchased in Feb 2008) is connected to the internet via ethernet cable through a Speedtouch router supplied by my ISP, o2.
    This internet connection is shared wirelessly with the other computer in the house, a G4 MDD running 10.3.9. After switching on Internet Sharing within System Preferences on the iMac, the G4 picks up and connects to the network created by the iMac, which is called (My Name)'s iMac.
    All very straightforward, and until a few days ago this set up worked perfectly.
    Then I decided to upgrade the iMac from 10.5.1 to 10.5.3, using the Combo updater downloaded from the Apple website.
    As far as the iMac is concerned, the upgrade went perfectly and I have no problems whatsoever. I can still access the internet without difficulty as before.
    The problem is with the G4. It no longer picks up the network from the iMac. The network's name ((My Name)'s iMac) no longer appears in the drop-down list under the Airport icon in the G4's menu bar (although this list does still contain the names of various neighbours' networks, as it did before, so the Airport in the G4 does still seem to be functioning). Internet sharing on the iMac is still switched on, and the Airport icon in its menu bar indicates that it is "transmitting", but the G4 is just not "receiving" any more. As a result, we can't get online on the G4.
    I would be very grateful if anyone could shed any light on this problem. If there is any further information I can supply which might help, please ask.
    Steve

    Hi SteveSCA-
    Greetings and welcome to the Apple boards
    Have you tried powering everything down and then back up again?
    Have you repaired permissions on the iMac?
    Luck-
    -DP

  • HP LaserJet Profession​al M1217nfw no longer works with ipad/iphon​e's coupons.co​m and Grocery IQ apps

    I have had this printer for several years. It worked flawlessly until a unilateral automatic HP firmware update bricked it at the beginning of last year. After months of inactivity, it started working again last week after I deleted and reinstalled everything from scratch.
    Everything is back the way it was -- except the two apps I really value no longer work with it.
    My iphone and ipad -- which both worked flawlessly with this printer for years -- now do not see the printer at all for several minutes and then it finally appears with a red warning button that says "printer not recognized"
    I have not upgraded any OS.  The only thing that changed was on HP's end.
    I tried deleting and reinstalling the apps. No change.
    I have HP's eprint software, but that does not help with these apps, as they use an internal printing mechanism and the actual coupon with the bar code is never visible on screen (and thus unable to be printed via another method).
    This question was solved.
    View Solution.

    Hi @krenster
    Welcome back to the HP Support Forums. I understand that there are two apps that no longer work with Apple’s AirPrint feature.
    I know you didn’t mention that you were getting this error, but the troubleshooting steps for “What if a 'No AirPrint Printers Found' message displays on my Apple device?” in the Printing Over a Wireless Network with Apple's AirPrint FAQs document should help resolve the issue.
    If the above doesn’t help, to better assist you, would you please supply some additional information?
    How is the printer connected (USB cable, ethernet, or wireless)?
    Are you able to print from other apps that support AirPrint?
    What version of iOS are you using on your Apple mobile device? I’m asking because apps will send out updates making them no longer functional with older operating systems. For example the HP ePrint app on iTunes was updated on October 25, 2014 and now requires the iOS device to be a minimum of iOS 6.0 or later. I have checked the two apps you mention in the thread title, and the Grocery IQ app requires your Apple device to be a minimum of iOS 6.0 or later and the coupons.com app requires your Apple device to be a minimum of iOS 7.0 or later.  If you are unsure how to check this, please follow the steps in Apple’s iPhone, iPad, iPod: How to find the software version
    Has there been any changes to your network, such as a new router, or a new internet provider?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Bluetooth No Longer Working With Headset

    I have a Motorola bluetooth headset that I've used with my ibook before without a hitch, but when I screwed up OS X and reinstalled it (note: reinstalled the operating system, but didn't format) it no longer works with the headset. I can connect to it just fine, but if I try to use it for anything such as switch my audio output to the headset, the program will freeze - same applies to using the headset for input. The headset isn't broken as it works fine with my phone, but my ibook won't cooperate and they are paired correctly. Is their someway to reinstall the bluetooth drivers or something to that extent? Thanks

    jrnet154 wrote:
    Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri
    If you have a headset, why use Raise to speak? Kinda defeats the purpose of the headset.
    Press and hold the button on your headest to call up Siri.

  • Facebook and Slacker no longer working with Firefox. Still work with Explorer. Until a week ago problem did not exist.

    I am for about one week not able to input information on Facebook. Also the Facebook page appears in a huge font. Regarding Slacker I do not see any available online radio stations. Until about a week ago everything worked fine. At present I can work with Internet Explorer, but at present can no longer work with Firefox.
    == URL of affected sites ==
    http://www.facebook.com; http //www.slacker.com
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; .NET4.0C)

    Haven't tried facebook... But Slacker doesn't work for me either. Running 4.0b7pre on Ubuntu...
    Going to google it at some point, but slacker.com returns:
    VelocityViewServlet : Error processing the template
    Invocation of method 'init' in class com.rockit.webplayer.beans.BrowserDetect threw exception class java.lang.NumberFormatException : For input string: ""
    java.lang.NumberFormatException: For input string: ""
    at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
    at java.lang.Integer.parseInt(Integer.java:468)
    at java.lang.Integer.parseInt(Integer.java:497)
    at com.rockit.webplayer.beans.browser.DetectFirefox.detect(Unknown Source)
    at com.rockit.webplayer.beans.BrowserDetect.doInit(Unknown Source)
    at com.rockit.webplayer.beans.BrowserDetect.init(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor49.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.velocity.util.introspection.UberspectImpl$VelMethodImpl.invoke(UberspectImpl.java:267)
    at org.apache.velocity.runtime.parser.node.ASTMethod.execute(ASTMethod.java:197)
    at org.apache.velocity.runtime.parser.node.ASTReference.execute(ASTReference.java:175)
    at org.apache.velocity.runtime.parser.node.ASTReference.render(ASTReference.java:220)
    at org.apache.velocity.runtime.parser.node.SimpleNode.render(SimpleNode.java:230)
    at org.apache.velocity.runtime.directive.Parse.render(Parse.java:181)
    at org.apache.velocity.runtime.parser.node.ASTDirective.render(ASTDirective.java:114)
    at org.apache.velocity.runtime.parser.node.SimpleNode.render(SimpleNode.java:230)
    at org.apache.velocity.Template.merge(Template.java:256)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.performMerge(Unknown Source)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.mergeTemplate(Unknown Source)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.doRequest(Unknown Source)
    at org.apache.velocity.tools.view.servlet.VelocityViewServlet.doGet(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    at com.rockit.util.servlet.StatsServletFilterAction.doFilter(Unknown Source)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)

  • IP Phone No Longer Working with FiOS

    For almost 5 years, we had a Mitel 5020 IP Phone Handest that we used for working from home.  The phone plugged directly into a 4 port Netgear router which in turn was connected to a Linksys Cable modem.  Comcast was the ISP.  The phone worked perfectly in connecting with the remote PBX.
    We moved to VZN FiOS one month ago and the phone has not worked since the new service was installed.  We followed the reset instructions for the phone and even returned it to the home office for testing.  The phone work perfectly in the office.
    The company telecom/IT support is hit & miss:  they returned the handset to us and kinda left us on our own to resolve the problem.
    We have a Westell Ultraline Series 3  9100EM router now.  The phone has been connected directly to the back of the router via ethernet cable.  I can ping the phone and ping the PBX from the router; but the PBX and phone no longer connect (although IT states that the PBX server sees the device).
    Is this a port forwarding issue?  If not, what other router settings should I check?
    I really enjoy the FiOS speed and the rest of the networked devices have all worked flawlessly since the conversion - even a flakey print server.
    Any thoughts? 

    gilbo72 wrote:
    Did anyone fix this issue.  I have a Mitel 5224 my new company sent me and it does not work with my 9100em router.  I tried it at my son's house and it worked fine using a Linksys router connected to a motorola cable modem.  
    I believe golfforlong's problems were resolved with one of the suggestions in this thread:
    http://www.dslreports.com/forum/r22074647-northwes​t-Mitel-Teleworker-5020-No-Longer-Connects-over-Fi​...
    Give those suggestions a try and post back if they don't work.

Maybe you are looking for