Internet Connection Pop-Up

Hello,
We have DSL and connect to the internet through PPPoE. Every 10 min. or so, this rather annoying dialog box will appear saying something like: "You are still connected to the Internet. Would you like to remain connected." Often, it'll be while we're browsing, so I'm not sure why it's thinking there is inactivity.
Is there any way to make this box go away for good??
Thanks!

Yes there is.
Go to System Preferences > Network.
At Show, select Built-in Ethernet.
Under the PPPoE tab, select PPPoE Options.
Under Session Options, deselect "Prompt every XX minutes to maintain connection".
Select OK to save the changed setting.

Similar Messages

  • Internet Connect Pop-up Window

    Internet Connect has started opening a pop-up window telling me that I am connected to the internet and asking if I want to stay connected when I am in the middle of working on the internet. OF COURSE I WANT TO STAY CONNECTED!!! This will be a disaster if I am downloading an upgrade and away from my computer and it breaks my connection. How do I get this to stop.
    I'm running OS-10.4.9, Safari Version 2.0.4 (419.3), and Internet Connect Version 1.4.2 (1.4.2)
    Power Mac G5   Mac OS X (10.4.9)   I'm running Safari Version 2.0.4 (419.3), and Internet Connect Version 1.4.2 (1.4.2)

    Assuming this is for a DSL connection that uses PPPoE, go to System Preferences > Network.
    At Show, select Built-in Ethernet.
    Under the PPPoE tab, select PPPoE Options.
    Make the changes as needed under Session Options.
    Select OK to save any changes and then Apply Now when existing Network at
    System preferences.

  • Internet Connect Pop-up error

    I keep getting an internet connect error. I'm connecting (as I always have), using the AirPort Extreme. All of a sudden, this message is popping up every so often stating that it cannot connect becuase I haven't entered a phone number.

    Yes. The account is there. There's just a verification with password issue. I had to change my password at Godaddy to include caps, special character, etc., and reinstall the account. Then I had to tweet the settings a bit. But think I have it resolved. Thanks.

  • Internet connect pop up, internet connect pop up, internet connect pop up

    There is a pop up on screen saying
    "Internet Connection
    could not find a communication device"
    please advise how to delete it.  Thanks

    I don't know what might be causing that message. It should have a close box or button; if not, try clicking the message and pressing Command-W.
    Perhaps someone else will post in with a suggestion as to the cause for the messages.

  • **** rid my pooter of the internet connect pop up

    hello,
    the popup window for "internet connect" haunts this computer.
    can you help me get rid of it?
    this is a imac g5 power pc. currently running 10.4.7
    about to be running 10.4.8
    there is no internal modem. only an ethernet port.
    there are only the following options in system preferences > network > show >
    NETWORK STATUS
    BLUETOOTH
    BUILT IN FIREWIRE
    BUILT IN ETHERNET
    AIRPORT
    NETWORK PORT CONFIGURATIONS
    what is making the internet connect window pop up?
    in bluetooth > bluetooth modem : an apple internal 56k is listed, with no option to turn it off.
    bluetooth is configured over ppp
    (the only bluetooth in use is keyboard and mouse)
    in built in ethernet >tcp/ip we are configured over dhcp. no proxies, no pppoe and apple talk IS active
    built in firewire > tcp/ip is configured over dhcp
    airport> tcp/ip is configured over ppp and airport> pppoe : connect using ppp is checked
    thanks for any help in this ghostbusting.
    w

    I'd start by trashing...
    /Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
    /Library/Preferences/SystemConfiguration/preferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    /Library/Preferences/com.apple.sharing.firewall.plist
    Then Reboot and setup again your Network(s).

  • My MacBook pretty much has a virus I guess because I've never had a Mac before. But I do know something is wrong because my Internet is freezing says I have no Internet connection which I do pop ups are out-of-control I can't change Yahoo off my

    last night I was downloading something for church (I am new to Mac notebooks it's the first one I've ever owned and I've owned it since March 2014). I have never had a problem ever with this computer that's one reason I love it. So after I was downloading this thing it sent me somewhere and to download my file so I had download my file well I don't think it downloaded the file I wanted because I never saw that file ever again I've tried everything to figure out what's going on because now my Internet is pretty much crashed it says that there is no Internet connection I have pop-ups that want to stop me using my Internet and says it's unavailable then last night when I was on a site I have all these things at the top and at the bottom that show me other prices for things and I can't figure out how to get those off I go to their website for removal and there is no removal for Mac. Google is my search engine it will not let me put in Google when I go to type for google it throws me on Yahoo no matter what Yahoo has pretty much taken over my Internet and I don't know what to do it it's a mess. Can someone please help me I am definitely not Mav Savy.
    Thanks a bunch

    Helpful Links Regarding Malware Problems
    If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide, AdwareMedic, or Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support.
    Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
    The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
    Fix Some Browser Pop-ups That Take Over Safari.
    Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
    Quit Safari
    Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
    Relaunch Safari
    If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
    This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
      Mac OS X Snow Leopard and malware detection
      OS X Lion- Protect your Mac from malware
      OS X Mountain Lion- Protect your Mac from malware
      OS X Mavericks- Protect your Mac from malware
      About file quarantine in OS X
    If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
    From user Joe Bailey comes this equally useful advice:
    The facts are:
    1. There is no anti-malware software that can detect 100% of the malware out there.
    2. There is no anti-malware that can detect everything targeting the Mac.
    3. The very best way to prevent the most attacks is for you as the user to be aware that
         the most successful malware attacks rely on very sophisticated social engineering
         techniques preying on human avarice, ****, and fear.
    4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
        your computer is intended to entice you to install their malware thinking it is a
        protection against malware.
    5. Some of the anti-malware products on the market are worse than the malware
        from which they purport to protect you.
    6. Be cautious where you go on the internet.
    7. Only download anything from sites you know are safe.
    8. Avoid links you receive in email, always be suspicious even if you get something
        you think is from a friend, but you were not expecting.
    9. If there is any question in your mind, then assume it is malware.

  • I have been using iTunes for years to connect to radio and just recently tried to get on and sign pops up stating " A error occurred while contracting the radio tuning service. Check your internet connection or try again later "  I do but the same respons

    I have been using iTunes for years to connect to the radio and just recently tried to tune in and an error sign pops up stating " A error occurred while contracting the radio tunning service. Check your internet connection or try again later." There's no problrm with my internet service so what's up?

    You are probably using an old version of iTunes with which the stream link service seems to have stopped working for many users of older iTunes.  No, Apple makes no comment about this kind of thing.  It may reappear, it may not (it has been dead for over a week now).  Your solution is to upgrade the operating system version on your computer from 10.5.8 to 10.6.8 so you can run a newer iTunes, or live without.  You can still open streams if you can get the URL, and you can then save them as playlist items.

  • When i try to turn on my ipod, it tells me to connect to itunes and restore but a message pops up and says that i dont have an internet connection.  the connection is on and it loads at 100mb per second.

    when i try to turn on my ipod, it tells me to connect to itunes and restore but a message pops up and says that i dont have an internet connection.  the connection is on and it loads at 100mb per second.

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • HT5945 Why does Instal Java SE 6 keep popping up and when I attempt to install it says that there is a problem with the internet connection ???  Please help

    I keep getting a pop up reminder to install Java SE 6.  When I attempt to install it an error occurs saying that there is a internet connection problem and the Java cannot be intalled.  This thing pops up every 15 minutes.  Am I doing something wrong?  Thanks for any help

    OK, so you don't have a working iTunes.
    What I would like to do now is to try installing each iTunes component separately.
    First uninstall the 5 iTunes programs that you have installed.
    You should have iTunesSetup.exe saved in a folder on your PC, probably in the downloads folder. If not download and save it now.
    Open the folder containing iTunessetup.exe with explorer.
    Next open notepad and copy the following 3 lines into it.
    md temp
    itunessetup /extract temp
    pause
    Save the file as extract.bat into the same folder that contains the itunes installer.
    Open the downloads folder and you should find the extract file that you saved. Double click on it and a black window will open telling you what it is doing. When its finished, press any key to continue.
    You should find that a folder called temp has been created containing all the itunes msi files.
    Install in this order by double clicking on them:
    Apple Application Support
    Bonjour
    Apple Mobile Device Support
    Apple Software Update
    Quicktime
    iTunes
    If one of the installs fails, stop and post the error message in full. I am hoping that by doing this separately we will get a better error message.

  • HT1430 My ipad has the Internet connected nut when I try to update apps a message pops up to say it cannot connect to,iTunes store.

    My ipad has the Internet connected nut when I try to update apps a message pops up to say it cannot connect to,iTunes store.

    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • Internet Connection Reminder pop up window?

    Hi everybody. I just purchased my first mac and I love everything about it. I'm glad this forum is here. Maybe someone can help resolve my issue? I have a pop up window that appears about every 15 minutes.
    It says: Internet Connect
    This is your reminder that your connection is still active. Do you wish to remain connected?
    Disconnect--Stay connected
    If I don't press the stay connected button than it will disconnect.
    I'm using DSL with a modem.
    Is there any way to get rid of it and keep a constant connection?
    Any help would be appreciated

    Hi! The modem normally has settings that can only be accessed through a web browser such as described HERE. One of the settings should say something like "connection type" with a drop down menu with something similar to connect on demand and smart keep alive. If anything other than the smart option is chosen the box below it says "connection timeout" which can be set in minutes. In THIS article you can see the menus. If you go into the modem either write down all the settings as you see them for reference or be sure than you don't change anything BUT having to do with the smart connection. Tom

  • WRT54G3G-ST router - no internet connection - can't reset router

    Hello.  Definite longer story definitely not short (I apologize for the rambling length...  I don't know what is and isn't important, so scan at will, please...  I am sorry...):  Recently my computer (Dell XPS 400, Windows XP Service Pack 3, Internet Explorer 7 with phishing filter and pop-up blocker on, SiteAdvisor, up-to-date McAfee Virus Scanner and Firewall, and a Linksys Wireless-G WRT54G3G-ST router with its power adapter plugged into the wall electrical outlet and a network cable from it directly connected to my computer.) got a drive-by Generic.dx trojan without me downloading anything from one of the few sites I visit daily.  My internet connection crawled, and I now have no connection at all. 
    I've been getting help from McAfee forums very helpful and quick good volunteers...  They recommended Malwarebytes Anti-Malware to me, which I downloaded from my second clean computer (a laptop) to my flash drive, then to my infected computer.  I ran it, tried updating it as recommended, and only then discovered the trojan killed my broadband entirely.  I scanned with it anyway, and it quickly found and removed/quarantined 11 Adware.MyWebSearch related files, but nothing else.  They then gave me a link to an offline updater patch file, and told me scan in safe mode until nothing else was found and check if it fixed my lack of broadband access.  Which I did, Malwarebytes found nothing else, but unfortunately I still had no broadband. 
    Next, they recommended WinsockXPFix.  Which I ran and it made all its registry changes OK, I rebooted as required but still no broadband unfortunately.  Did using WinsockXPFix make things worse for me with the registry changes it made?  I used its registry backup to save the pre-changed registry files prior to running.  Should I revert back since I still have no broadband connection?  The McAfee volunteers then kindly told me I needed to hard reset the router, though I've tried countless times with no fortune.  I'm at a definite loss as to what, if anything, I can do to hopefully get my broadband back, please... 
    It's very confusing with the numerous different variations to reset routers, and what I need to do for my router model (Variations:  Unplug this cable/adapter exactly where, or not; hold the reset button between 5-30 seconds; rebooting the computer, or not; waiting 1 or 2 minutes between various steps, or not - and for all of these at what exact point in the reset process.). 
    I reset it once before with the reset button, routers page at http://192.168.1.1, default admin password, then changed it for security, etc; but this time I can't get it to work.  I'm happy as can be to try again, to get a walk-through maybe, anything please...  When I go to http://192.168.1.1 now, or any other address, Internet Explorer gripes at me that I'm offline, which is annoyingly correct.  I don't have, and never had Zone Alarm, but disabling my McAfee Firewall doesn't help.  IPCONFIG at the Command Prompt gives me a Windows assigned address of 169.254.X.X 
    I was going to use the routers Setup Wizard CD to try to reset the router, and if that failed to try to get its firmware version number to maybe upgrade.  But I was going to ask here first for expert advice since I've read many things that can go wrong while upgrading firmware.  However, scanning the CD (Without running the CD.) McAfee found the virus W32/HLLP.Philis.ini in the file "D:\_desktop.ini" on the CD.  McAfee didn't delete the file, I don't know why. 
       I scanned my entire computer several times and no infections were reported.  I uploaded the file several times to both www.virustotal.com (39 online virus scanners), and virusscan.jotti.org (20 online virus scanners) and every time every virus scanner reported no possible infections.  Is my up-to-date McAfee virus scanner reporting a false positive and yet Jotti and Virustotal's 2 McAfee scanners report the file as probable clean?  Is "_desktop.ini" a legitimate Linksys file?  I found no information on Linksys/its forums about it.  My problems just keep multiplying...mentioning of more problems... 
    Finding that suspect file on the CD I decided to instead download the Setup Wizard from Linksys
    (Router product page:  http://www.linksysbycisco.com/US/en/support/WRT54G3G-ST/download
    Actual file:  http://downloads.linksysbycisco.com/downloads/WRT54G3G-ST_SetupWizard_4_2_06042008.zip)
    to my flash drive, then to my infected computer that is connected to the router.  I ran it (Downloaded file version: 4.2.0.007 - Original CD Setup Wizard version: 4.0 printed on CD front.) and it immediately gave 1 of 3 options:  Mobile Broadband Only, Broadband WAN Only, or Broadband WAN and Mobile Broadband.  I don't know what damage, if any, I caused by continuing. 
       It looked like it was trying to go through the entire router setup process.  I thought it would take me to some options to reset the router, as I've read in the User Guide and elsewhere - that was my understanding.  The setup process stopped at only 30% done "Router not found, please make sure the router is properly connected and try again."  How much overwriting of original router setup files did I do by continuing?  I'm entirely confused.  Doesn't the Wizard check if the router has been previously setup prior to setting it up again?  Did the version difference cause my router to not be detected by the Setup Wizard?  Did the Generic.dx trojan that killed my broadband trash my computer settings so bad that my router is undetectable/essentially not setup? 
    Update of sorts:  I tried one last time to reset the router, and I unplugged/plugged the network cable.  Doing that I still had no broadband on my main usage Dell XPS computer that's connected to the Linksys router.  However, my laptop, with Data Card in the router, was for the first time able to find the network - the constant connection and speed is brilliant, it's what it allways has been on the laptop (Since the trojan/router problems, my laptop only had broadband with the Data Card in the laptop.).  Maybe the network cable simply wasn't re-connected properly/entirely during 1 of the many reset attempts, it indeed could also explain the downloaded Setup Wizard not being able to find the router/only getting 30% done. 
    Laptop Command Prompt IPCONFIG /ALL with Sprint Data Card inserted in laptop computer slot: 
    IP Address    = 174.158.XX.XXX (Sprint)
    Subnet Mask = 255.255.255.255
    DNS Servers = 68.28.90.91
                               68.28.82.91
    Laptop Command Prompt IPCONFIG /ALL with Sprint Data Card inserted in router: 
    IP Address    = 192.168.1.1XX
    Subnet Mask = 255.255.255.0
    Default Gateway = 192.168.1.1
    DHCP Server      = 192.168.1.1
    DNS Servers      = 192.168.1.1
    Since my laptop started working with the Data Card in the router I haven't tried again to reset the router, nor have I tried the downloaded Setup Wizard.  I don't want to mess anything up further than I have(?) / the trojan has, and I need some expert advice, please, as to which of the 2 if either I should do (first?).  On my laptop computer only, typing http://192.168.1.1 in Internet Explorer gets the pop-up for username and password, but I haven't proceeded.  I've read you shouldn't reset the router and/or(? Is it both or just 1 please?) upgrade the firmware unless the computer is directly connected to the router - which my laptop is not.  On my other computer that still has no broadband, Internet Explorer still tells me I'm offline when typing http://192.168.1.1 into it.  My IP Address on it is still a Windows assigned 169.254.X.X and a Command Prompt PING 192.168.1.1 returns with "Destination host unreachable.", as it allways has and same with all other addresses (Except for 169.254.X.X). 
    Annoying 2nd "update" of sorts, apologies for length, as allways:  I've been so focused on the trojan/broadband killing that I've cluelessly largely forgot that I have dial-up with AOL.  Trying AOL dial-up also does not work, the insanity thickens...  AOL software tells me to check my connection, but all phone cords are plugged in as should be.  I plugged a phone directly into the wall outlet and I get a dial tone, I can call out OK, and the phone rings and gets calls OK.  Device Manager-Modems-Properties-Device Status says the modem is working properly, and Resources Tab shows no conflicts.  Diagnostics Tab's Query Modem looks OK to me, as does the log, but as allways I'm definitely no expert.  I didn't change any settings anywhere. 
       I have noticed off and on that checking IPCONFIG it says my IP Address is 192.168.1.100   It lasts maybe a day (then goes back to 169.254.X.X), maybe longer, I don't know - I don't check that often to pin it down (Should I?).  During this time neither my broadband, nor my dial-up works.  I can PING 192.168.1.100, but nothing else.  I'm convinced the evil trojan killed both my broadband and dial-up - I've never had a problem with my Conexant D850 56K V.9x DFVc Modem prior.  Also, I'm not convinced the trojan is not still lurking everywhere on my computer, I think it is... 
    Any and all help in restoring my broadband/dial-up is greatly appreciated, please...  Thank you! 
    Solved!
    Go to Solution.

    Hello.  It's been entirely too long since I've replied, I'm sorry.  There's no excuse, and it's terribly rude of me...  You took the time to read and reply to me, and I endlessly appreciate that indeed.  I apologize for my long delay, I'm sorry... 
    After I left my message I downloaded many virus/spyware scanners, etc. from my laptop onto my flash drive, then my other computer for some needed thorough deep scans.  One that I downloaded was Network Magic, which somehow, someway fixed both my broadband/dial-up internet on my main computer that's connected to the WRT54G3G-ST router.  I don't know what/how it repaired my connection, but the broadband connection/speed has been working brilliantly since...  Network Magic worked for me, and I highly recommend it to everyone who has stubborn complete lack of internet problems (caused by trojans at that) as I did.  There's no guarantee it'll work, but it did for me to my amazement. 
    Network Magic, as is Linksys, is owned by parent company Cisco.  Respectfully to all the good knowledgeable experts here (Which clearly I am not.), I don't want to tread out of my bounds.  I'm simply trying hopefully to be helpful and save some headaches for both you the volunteers and the users...buying a new router and/or computer was on my mind, with all due respect I recommend suggesting to try Network Magic to users if resetting the router/all else fails, please.  I did use WinsockXPFix/WinsockFix utility prior to using Network Magic, I don't know if that matters. 
    I also upgraded my McAfee package, I installed over my old software instead of uninstalling first, which caused errors in the virus scanner of all critically needed things.  I have it installed properly now, but it did cause quite a delay in re-focus of my time.  Some of the virus scans also found many trojans, some were the same/in the same folders that killed my broadband - which stopped me in my tracks to insure uninfected cleaning. 
    That definitely doesn't entirely explain the long lapse of time, and I apologize for that, again.  It's just that I'm trying to be cautious and slow in all this.  To answer the first very good idea you made:  Unfortunately, there's no place on my other computer to plug the router in to, which all the more so caused frustration (at the time).  I forgot to include this in my novel length post of countless things to check/remember...  It was a brilliant idea though, thank you... 
    I thank you for your time and help, I do sincerely appreciate it...  Thank you...  I think, and hope this matter is solved.  It seems to be, the router is working perfectly as it allways has, and I'm positively happy as can be about it.  Thank you...  Peace... 

  • Dock and Internet Connection Problem

    Since downloading some software updates recently, my computer has been behaving strangely. Most notably, I no longer have an internet connection on my Mac. My Mac is the computer connected to my wireless router and my other computers pick up the internet signal fine. Network Diagnostics show all aspects FAILED.
    This all became apparent when I hit F12 to access my Dashboard. All of my widgets were INOP and then my Dock went dead--wouldn't pop up. I had to restart my computer to get my dock to show.
    Can anyone help?

    Well after some troubleshooting, it looks like my network card may be the culprit. Does anyone know the cost of replacing one and/or where I can order one if it comes to that? Maybe it's just some settings (wishful thinking?). Can anyone help?

  • Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?

    That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
    Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
    These little tweaks are the only thing I HATE about upgrading my OS.

  • After upgrading to Lion my internet connection doesn't work

    Hey folks,
         MacPro 2010, wired connection through Verizon FiOS, upgraded to Lion (via App Store) back in July, but now my wife says she can't get on the Interent
    on her account, even though all connections are good, she has an IP, subnet, DNS are good, the ethernet settings say she is connected, but using Chrome (13.0.782.122) or Safari, just hangs on browser launch. No URL will resolve no matter what site I enter. But when I log out of her account and into mine I can connect using the same Chrome browser just fine.
         The only thing I can come up with is Chrome has had issues for quite some time on Snow Leopard and Lion when trying to update. About Chrome will display there is a new version and hitting the Install button will result in a "Update Server not available Error Code: 12". Any workaround by the Chrome Blog was not helpful, and uninstalling and reinstalling the program would sometimes work. But every so often when I would manually check About Chrome it would mysteriously be updated all by itself, and I was fine. Eventually though, every so often I would check and it would say there's a new version and I would get the infamous error. I could never seem to update the program myself. I would have to wait until it did it on its own?
    I don't know if fooling around with Chrome's insides (using AppTrap to get rid of Chrome, manually deleting Preferences.js files, etc) corrupted something on my wifes account, which is a limited account and had some Parental Controls enabled - although she had Allow Unrestricted Access to Internet Sites checked off. I DID, however, have the Apps section restricted at some level, and I believe certain Chrome features were blocked ( like google updater), because while logged into her account, chrome would pop up: "you don't have access to GoogleUpdater...etc" and another one named   "xml or xmd" something or other, I can't remember exactly so I apologize. But while troubleshooting the no internet issue, I hit "Always Allow" for both messages, put in my password and she still couldn't get on the web, even when I turned off Parental Controls altogether. I couldn't even do a Software Update, it would just not move.
    I even opened a Terminal window and Pinged www.google.com and was receiving replys at a steady rate, so I don't know what else to try. Safari is also exhibiting this same behavior, so I'm thinking its a common issue with both browsers since both use Webkit? I could be wrong obviously...
    I'm at a loss as to what it could be or what to test out. Any help would be welcomed.
    Philip

    I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
    In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
    In this case the problem was related to mDNSResponder task which handles all dns queries.
    It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
    The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
    QUESTION: Is your problem independent of the access point / router you connect to.
    I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
    No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
    Software is of poor quality. Not much more to say in this matter.
    I found a very interesting article dated 1996 about programming which I think is still valid.
    Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
    Below the fragment (with some connection to Apple)
    Software is everything. It also s***s.
    "It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

Maybe you are looking for

  • Using iPhone 5S model A1533 in Japan

    I'd like to use my unlocked iPhone for both voice and data while visiting in Japan next month.  Many sites that I've visited mention that only the model A1453 iPhone 5S has complete functionality in Japan.  Does that mean that even if I have an inter

  • Facebook network in GraphML  format (using XSLT)

    hello, facebook developer platform provides a java api that allows us to extract friends list into java List of friends ids. my goal is to find a way to format facebook friends list data into GraphML format.this graphml file will be used to draw a Gr

  • Questions regarding features of BPM

    Hi, I am currently writing my diploma thesis and evaluating different BPM Solutions. One of those is SAP NetWeaver BPM. Although i studied many pdfs and tried to install the trial version, some questions remained. Maybe you can help? I donu2019t need

  • How to create a table inside JSON View

    Hi All, I am trying to create a UI5 app inside which i want to fetch the data using SAP gateway service which i want to embed into JSON view to be displayed inside a table. I am totally new to JSON & UI5 so please let me know where i am incorrect: In

  • Macbook Core 2 Duo screen glitch/flickering??

    My late 2009 macbook has a bad screen glitching issue anytime you move the screen. Sometimes I even have to hold my screen in a certain place for it stop from glitching so i can use my computer. If I took my computer to the apple store for a repair..