Internet Connection Setup

I am trying to create a wireless network by connecting the airport extreme with my internet modem/router. Should I choose Bridge Mode or Sharing A Public IP Address?
Thanks.

Sorry, by "downstream" I mean the router would not be the first (upstream) router connected to the Internet.
Somewhat graphically: Internet modem > Upstream Router > Downstream Router > Network Client.
In this example, the upstream router would provide NAT & DHCP services and the downstream one would be configured as a bridge. This will allow network clients connected to the downstream router to get the same NAT & DHCP services as those connected to the upstream router.

Similar Messages

Cable Modem internet Connection Setup

Hello
How do i setup a Cable modem internet connection for my x86 solaris machine
I have the hardware connection set to go but i have no clue on how to set it up the software.
Thx

go read the FAQs pointed to from www.sun.com/intel

Cisco UC540W DHCP Internet connection Issue.

Hi guys, i would like some help trying to figure this out:
We have an UC540 system in our office, we also have a broadband internet connection through a local ISP, the UC540 internet connection setup is DHCP, but when i connect the ONT cable into the WAN port, it doesnt get any ip address, i tried with other device (D-LINK router) and it works perfectly.
I need your advice to let me know what i am missing. Here is the sh run configutarion, and no CLI changes have been made by the way.
Thanks in advance for the assistance.

ISP may have a temporary MAC lock to other router address. So you may need to stay with ISP device turned off some hours or a night before reconnecting Cisco.

How can a session be setup between two MacBook Pro's at different locations on high speed Internet connections, be setup to have a live recording session in Logic?

My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it. :-)
Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
Scott

Hey Scott
You and ALOT of people are attempting to do this, myself included.
Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
HOWEVER:
A few things CAN be done:
IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
(SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
Good luck!
Treatment

How to setup internet connection in Solaris 10 X86

All
I have installed Solaris 10 X86 in my intel laptop. I want to setup internet connection in solaris. Can you please provide me some info on this ? I have Comcast broadband cable modem installed at home.
Thanks
Murali

user8473723 wrote:
All
I have installed Solaris 10 X86 in my intel laptop. I want to setup internet connection in solaris. You need to determine whether your NIC is even supported.
(but you kept that particular information a secret in your forum post)
If the Ethernet chipset is supported, you then need to install the drivers.
By the way, very few wireless networking chipsets are supported.

How to setup Internet connection in Solaris 10

Hi All,
I recently installed Solaris 10 in my laptop as a guest OS which is having Host OS of Windows 7 by using Virtual Box.
I shared all my hardwares and network connection and still I cannot use the internet connection in my guest OS (Solaris 10).
I'm new to this could anyone please provide steps to set up internet connection in Solaris 10???
Thanks,
Mahesh

user8473723 wrote:
All
I have installed Solaris 10 X86 in my intel laptop. I want to setup internet connection in solaris. You need to determine whether your NIC is even supported.
(but you kept that particular information a secret in your forum post)
If the Ethernet chipset is supported, you then need to install the drivers.
By the way, very few wireless networking chipsets are supported.

Please do the following: -Close any running programs -Empty your temporary folder -Check your internet connection (Internet-based Setups) Then try to run setup again. Error code -6003. How do I empty temporary folder?. Thanks. Allan

I am having a problem installing Nikon Codec, software to view photos and get this error error message: Setup has experienced an error. Please do the following: -Close any running programs -Empty your temporary folder -Check your internet connection (Internet-based Setups) Then try to run setup again. Error code -6003. How do I empty temporary folder?. Thanks. Allan

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://support.mozilla.com/kb/Deleting+cookies
*http://support.mozilla.com/kb/How+to+clear+the+cache

How do I fix this internet connection with Mobile Me setup?

Hi to the forum,
I purchased an apple ipod touch from Officeworks a few months back, and finally decided to set it up to work today.
I would like to get the Mobile me setup going, so I can locate my ipod if I accidentally lose it somewhere.
The only problem, is that after I have entered my password [which I am believing is the same as my apple itunes password to download intunes], I get this message saying:
"Verification Failed. The internet connection appears to be offline."
I am not sure how to join my ipod touch to the internet. I have it connected to my computer and I have itunes going, and my ipod is showing it is connected to my itunes program. I just can't workout how to actually have my ipod connected to the internet.
I am using Windows 7, and it is 64 bit.
Thanks if anyone has any clues as to what I should do here.
best,
Steve :-)

Hi Vazandrew,
thanks kindly for your reply. I will check out the link.
thanks and best,
Steve :-)

Can't get pass "Internet connection" on Setup wizard for new Linksys WRT54g router

Hello everyone.
Well, I just bought (today) a Linksys WRT54G wirelss router and wile going through the Setup portion of the wizard (part of the installation of the EasyLink Advisor application), after I connect all the cables (in proper order) it tries to establish an Internet connection but comes back saying that no Internet connection is present. I tried powering off and umplugging the Verizon Westell modem I have but it still says the same thing. I even tried to get the set up completed with two other verizon modems I have but just can't get pass checking for Internet connection.
My ISP is Verizon and I use just a regular DSL connection using a Westell VersaLink model 327W.
Is there anything I need to do to get this going? I mean, the set up CD shows how to hook up the cables and everything so it really is not that hard but right after the "hook up the cable" portion it check for an Internet connection and that's were I get stuck.
Any help will be appreciated.

Your problem is that the Westel "modem" is actually a "modem-router", and it uses the same 192.168.1.x address space as the WRT54G.
The ideal solution is to place the Westell into "bridge" mode. This will convert it to a true modem (all router features are turned off). I assume you are using PPPoE (if this is not correct, please let me know). If so, then you will need to setup the WRT54G to do your PPPoE login, when the Westell is set to bridge mode. Also note that you must first disconnect the Westell from the WRT54G and from the Internet, before you attempt to place the Westell into bridge mode.
An alternate solution is to leave the Westell as is, disconnect it from the WRT54G, then login to the WRT54G and change the "Local IP address" to 192.168.2.1 , then reconnect your system. In this case, the Westell will do your PPPoE login, and the WRT54G will be set to "Internet connection type" of "DHCP - automatic". If all you do is browse the web, do some emails, and basic stuff, this setup will probably work OK. If you are planning more complicated stuff (Internet gaming with port forwarding, video conferencing, etc.) then be sure to use the "bridge" mode described above.

I can't get in to setup internet connection because the message(the ipod touch hasn't been backed up in 11 weeks.....) is blocking me from going any further.Please help?

I can't get in to setup internet connection because the message(the ipod touch hasn't been backed up in 11 weeks.....) is blocking me from going any further.Please help?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

TS1589 i setup my airport extreme and now i do not have no internet connection

I'm having a difficult time setting up my airport extreme to my iphone 4s. i setup my airport extreme and now i don't have no internet connection. I have a PC not a Mac desktop computer at home. i am confused with the setup.

downlaod the airport utility app on your iphone, it will let you setup your device
then factory reset your extreme
Press and hold the reset button with a pen, pencil, or straightened paperclip until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.

Can I setup a TC without Internet connection?i

I Want wifi wifi so that my devices can connect for time machine, but I do not want to have a WAN connection.
at the moment, it just moans about DHCP ranges, and Internet does not seem to have a 'none' option
it is to be the DHCP server.
I Have tried statically adding Internet ip addresses but it just complains about the network ip addresses ... And it complains whether my static address is inside or outside of my network dhcp range. Apparently they conflict ... No further information is given.
thanks.

The main internet connection is likely conflicting.
Setup the TC so it doesn't conflict.. the info is here.
Using Time Capsule hardwired to Mac for back-up only.

How to setup dialup internet connection(PPP) in Solaris for ADSL modem

I ,m new to Solaris. How to setup dialup internet connection(PPP) in Solaris for ethernet ADSL modem? will solaris recognise the ethernet modem?? I only have windows drivers for the ethernet modem. Where to look for info on this?

The setting you set in IE also affects Firefox. For example, if you set the following, then when Firefox makes a connection request to Windows, Windows is supposed to dial the connection:
Windows Control Panel > Internet Options > Connections or <br>
Internet Explorer Tools menu > Internet Options > Connections
"Dial whenever a network connection is not present"
Source: [[How to make Firefox automatically dial up]]

Can i use a brand new macbook pro without internet connection? I can't get through the setup without specifying internet.

My friend bought on my advice a macbook pro. He has no internet connection at home. Getting started with the macbook pro, we can't skip the internet connection information box.
This may seem a little strange in a www organised world, but he only wants to use the macbook for storing photos and music.
Is there something we overlooked, or is internet connection a must?
Thx

There should be a place to select "Other network options" or some such wording, where you can select "This Mac does not connect to the internet."

HP Web Services Setup - Connection error. Check Internet connection.

I am trying to enable HP Web Services but Connection error. Check Internet connection. .
I use static ip with Preferred DNS Address: 8.8.8.8 and 8.8.4.4 and it does not work.
I changed to DHCP also it does not work.
I have a ZTE home modem router connected to the printer.
This question was solved.
View Solution.

Hi MaBek,
Can you check if your printers IP address is valid.
If you have a laptop or PC connected to the same network, open a browser and type the IP address in the address bar and hit enter.
This should open a Embedded web Server page if the IP address is valid.
Here you can navigate to Web Services tab and click on enable to enable web services.
Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

Internet Connection Setup

Similar Messages

Maybe you are looking for