Internet connection slower even though TC is not part of wireless network!
How can this be? I connected TC to my iMac by ethernet cable to do the initial backup of my hard drive. The backup has been complete now for a number of days. What really mystifies me is the slower connection speed (I have cable) even when TC is NOT backing up, i.e., even between the hourly backups when TC isn't running.
I notice the slower speeds mostly via Safari. There is now a noticeable lag time between when I click on a URL and when the page loads. It's intermittent, but sometimes, it's so bad,mI havevto stop the loading of the page and try reloading the page. Usually, this pushes it through.
I never had this problem prior to connecting TC to my iMac.
I also have the most current firmware installed for TC, Airport Utility, etc.
Can anyone explain this phenomenon? I was planning to set up a dual network with TC and now I'm not so enthusiastic.
PS Have been reading through the threads here and came across one that reported a problem with TC and their 2.4 GHz phone? Could this be part of my problem? Even though TC isn't connected to my wireless network?
An additional question: isn't TC a 5 GHz device? Why would a 2.4 GHz device interfere with the 5 GHz TC?
Message was edited by: WildBill
The default radio mode for the TC is 802.11 n operating in the 2.4 GHz mode, but if one has a 5 GHz iMac, one would b able to choose the 5v GHz option?
You would choose the radio mode, using the AirPort Utility, to change to the appropriate 5 GHz radio band to meet your wireless network requirements. If your iMac is "n" enabled, it should be able to both discover the TC's 5 GHz network, but also connect to it.
Also, regarding a previous post on this thread, have you personally used the OpenDNS's DNS servers? Did it make a significant difference? How were the ads?
Yes, I am currently using this service with several of my computers, both Macs and PCs. In most cases I get better performance (as far as locating and accessing web pages) and better stability than when using my ISP's DNS servers. You may find a similar experience. As far as ads, the only "ads" I get is when I either type in an incorrect URL or the site does not exist. You would then get a default message page with a OpenDNS banner.
Similar Messages
-
Internet connection error saying a cable is not plugged into the network adaptor
Hi, I have a
HP Pavilion Media Center m8530f Desktop PC recently my hard drive quit working so I installed new hard drive same brand Seagate just bigger storage had to install using my original recover discs that I created when I bought computer in 2008 from HP refurb it is still all original no upgrades and when finish could not connect to internet, get message a cable is not plugged into the network adapter "Local Area Connection", I have checked cable it is plugged into adapter I plugged cable into my laptop and it recognises it immediatly, I uninstalled network adapter and went to HP and downloaded adapter for my computer spec on to falsh drive and reinstalled on computer still same message, under devce manger adapter shows up and has no warning symbols when i run check on adapter it says it is fine.
NEED HELP, Thanks Ronbo68It's on the rear, just above the LAN cable (internet cable). PS> Your not reading all that is asked.
Step 1: Checking cables and connections
Use the following steps to check connections and networking hardware.
Check the activity light next to the network connector on the back of the computer.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus -
please can anybody give me some useful suggestions....
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Hi I am having iphone 4S. Today while connecting to my laptop for regular update, my phone started rebooting and message showed error in rebooting. Now even though i connected to laptop which has internet connection, i phone OS booting still not completed
I have factory reset my phone twice.. I have disabled iCloud settings.. I looked up possible downgrading options.. which isn't possible. I feel as if my iPhone 4 was offered the update so I was forced to get another phone
-
I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
When i open iPhoto, it shows my iPod touch is connected even though it's not.
When I open iPhoto, it shows that my iPod touch 4th generation is connected under the devices tab even though it is not. Here is a screen shot of what it looks like.
Then when I plug in my iPod, iPhoto still will not open, i still get the same screen image when i manually open it and it will not show me anything that is on the iPod. I have tried unmounting it in the device tab and restarting iPhoto. Any suggestions would be appreciated.well, kiss my grits!! i feel like i am running a pc today. after making this post i shutdown all my apps and then did a restart, and low and behold when i plugged in my ipod, iphoto opened and it recognized the photos. go figure all it needed was a restart.
-
I bought a second hand 4s iphone and I can't use the internet on 3g even though it looks like I'm connected ... can you help please?
Who's your carrier?
What country are you in?
Was it from a shop or a personal deal?
If your phone doesn't function on the cellular network, goto the carrier first -
safari tries to connect to a hotel wifi even though we are not at the hotel. the wifi is not listed in settings
Yes... tap Settings / Wi Fi
-
My iPhone V will not connect to a Microsoft Exchange server. It says that the User Name or Password are incorrect even though they're not and I can log on directly to Exchange with the same parameters using the web browser.
I bought the phone when it came out last October. The connection did not work at first, then started without warning in December. It worked perfectly for 2 months then stopped again when IOS 6.1.2 was Installed.
Help please!I have forwarded these questions about the version of Exchange server that is being used and whether Microsoft host the mai themselves to the IT Dept but I will not get a reply from them until tomorrow.
In the meantime I have also tried:
Deleting and re-creating the account AGAIN!
And re-setting the phone (recommended as a solution to a similar problem with an iPad in another forum.
But please remember that:
The phone would not connect for 2 months after I bought it
Then started working unexpectedly in December
Then stopped working again when IOS 6.1.2. was installed
Also why am I the only person affected by this when colleagues with iPhone 3s and 4s who use the same mail system are not (I am still trying to find one with an iPhone V to see if their's works).
Like I said I think that there must be a fault, either with my own phone or with iPhone Vs in general. -
when i enter my apple id into i message it says it has a network connection problem even though it has full internet?What can I do???
See my response to one or your three posts.
-
HT1430 My ipad 2 safari is not responding to any address typed. Internet connection is good though.
My ipad 2 safari is not responding to any address typed. Internet connection is good though.
Hi Kayakin
You're welcome. Glad to have helped.
Mahalo (thanks) for the and Aloha from Big Island. -
Apparently, BT are capping me even though I'm not ...
Hey there, Recently I have been getting really slow speeds during peak times, I know you'll say "Thats what is meant to happen" and I know it is but my internet is going so slow that I can't load YouTube videos and play on Xbox LIVE from around 5:20pm till about 11:30pm all week. Sometimes even loading web pages is painfully slow. Heres something though: We are currently with Sky for Broadband. We called them up and we checked everything, It isn't Sky that is capping us because we checked our current speeds and sure enough I was getting the speed advertised therefore they said it was BT capping us. I have been livid because gaming doesn't take up much bandwidth, we can't upgrade our internet because we are outside Sky's network coverage area. So they said they'd reset something to get rid of the cap but that didn't work. So, from what I have seen and been told BT is capping us even though we are not with them and they are giving us slower speeds than what they cap their customers are. Shocking. Any Help?
P.S we recently switched from BT because we kept being getting disconnected every 3 - 4 hours and we had no "cap" on Sky until about a month ago.Nizzyyy wrote:
The reason that I was saying that it was BT is that Sky themselves told me BT was capping peoples speeds. My limit is 40GB which there is NO WAY I am hitting as I don't download much and I watch YouTube and do online Gaming which as I said doesn't take up much bandwidth. The possible reason Sky could have said that it was BT is because they control everything in my area. I will try other forums like this and report back
I'm afraid Sky are lying to you. BT do *not* cap other operator/ISP connections.
Sky are your provider, get onto their service desk and tell them to stop palming you off onto someone else. It is a Sky problem, not BT. If Sky don't have enough bandwidth to supply their customers, then that is a Sky problem, not BT. It doesn't matter if BT control everything or not, Sky are paying BT to use their equipment and bandwidth, if there is not enough - then it is Sky promising to deliver something they are unable.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures -
Why does JDBC keep connections open even though I close the resultsets?
I attached my program and my output. Please bear with me for the long output. My question here is why do the connections remain even though I closed the resultsets. I need to reuse my prepared statements, but don't want to keep the oracle sessions open. Is this possible? What do I need to do?
If you notice in the program, I have executed the query to find the number of open sessions 5 times.
1) After creating the connections
2) After creating the prepared statements
3) After executing them
4) After getString on the resultSets
5) After closing the resultsets.
And the sessions are still there even is Step 5 :-(
import java.sql.*;
* Title:
* Description:
* Copyright: Copyright (c) 2001
* Company:
* @author
* @version 1.0
public class Test {
String dburl = "jdbc:oracle:thin:@oracle92:1521:oracle92";
String query = "select s.username,s.sid ,s.logon_time, s.serial#,sql.sql_text"+
" from v$session s, v$sqltext sql where sql.address = "+
"s.sql_address and sql.hash_value = s.sql_hash_value "+
"and upper(s.username) like 'KRTEMP%'"+
" order by s.username ,s.sid ,s.serial# ,sql.piece" ;
// String query = "select s.username, s.sid ,s.logon_time, s.status from v$session s where upper(s.username) like 'KRTEMP%'";
public Test(int num) throws Exception {
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection[] con = new Connection[num];
for(int i=0; i<num; i++) {
con[i] = DriverManager.getConnection(dburl, "krtemp", "krtemp");
executeQuery();
PreparedStatement[] ps = new PreparedStatement[num];
for(int i=0; i<num; i++) {
ps[i] = con.prepareStatement("select * from contact");
executeQuery();
ResultSet[] rs = new ResultSet[num];
for(int i=0; i<num; i++) {
rs[i] = ps[i].executeQuery();
executeQuery();
for(int i=0; i<num; i++) {
ResultSetMetaData meta = rs[i].getMetaData();
while(rs[i].next()) {
for(int j=1; j<=meta.getColumnCount(); j++) {
rs[i].getString(j);
executeQuery();
for(int i=0; i<num; i++) {
rs[i].close();
executeQuery();
private void executeQuery() throws Exception {
Connection con = DriverManager.getConnection(dburl, "krtemp", "krtemp");
PreparedStatement ps = con.prepareStatement(query);
ResultSet rs = ps.executeQuery();
ResultSetMetaData meta = rs.getMetaData();
System.out.println("-----");
while(rs.next()) {
for(int i=1; i<=meta.getColumnCount(); i++) {
System.out.print(rs.getString(i));
System.out.print(" ");
System.out.println();
System.out.println("-----");
public static void main(String[] args) throws Exception {
Test test = new Test(5);
The output is
KRTEMP 9 2005-06-27 17:09:30.0 5436 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS WH
ERE PARAMETER ='NLS_
KRTEMP 9 2005-06-27 17:09:30.0 5436 DATE_FORMAT'
KRTEMP 34 2005-06-26 18:51:01.0 3629 rename tstore to store
KRTEMP 37 2005-06-27 17:09:25.0 4209 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 37 2005-06-27 17:09:25.0 4209 DATE_FORMAT'
KRTEMP 74 2005-06-27 17:09:26.0 17625 select appId from profile_application_tabl
e wher
KRTEMP 74 2005-06-27 17:09:26.0 17625 e appName=:1 and appVersion=:2
KRTEMP 83 2005-06-27 17:09:25.0 1771 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 83 2005-06-27 17:09:25.0 1771 DATE_FORMAT'
KRTEMP 105 2005-06-27 17:09:30.0 3296 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 105 2005-06-27 17:09:30.0 3296 DATE_FORMAT'
KRTEMP 111 2005-06-27 17:09:25.0 4878 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 111 2005-06-27 17:09:25.0 4878 DATE_FORMAT'
KRTEMP 153 2005-06-27 17:09:30.0 31065 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 153 2005-06-27 17:09:30.0 31065 DATE_FORMAT'
KRTEMP 163 2005-06-27 17:09:30.0 3205 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 163 2005-06-27 17:09:30.0 3205 DATE_FORMAT'
KRTEMP 183 2005-06-27 17:09:30.0 3465 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 183 2005-06-27 17:09:30.0 3465 DATE_FORMAT'
KRTEMP 191 2005-06-27 17:09:26.0 5438 select appId from profile_application_tabl
e wher
KRTEMP 191 2005-06-27 17:09:26.0 5438 e appName=:1 and appVersion=:2
KRTEMP 256 2005-06-27 17:09:30.0 2718 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 256 2005-06-27 17:09:30.0 2718 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 256 2005-06-27 17:09:30.0 2718 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 256 2005-06-27 17:09:30.0 2718 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.piece
KRTEMP 9 2005-06-27 17:09:30.0 5436 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS WH
ERE PARAMETER ='NLS_
KRTEMP 9 2005-06-27 17:09:30.0 5436 DATE_FORMAT'
KRTEMP 34 2005-06-26 18:51:01.0 3629 rename tstore to store
KRTEMP 37 2005-06-27 17:09:25.0 4209 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 37 2005-06-27 17:09:25.0 4209 DATE_FORMAT'
KRTEMP 74 2005-06-27 17:09:26.0 17625 select appId from profile_application_tabl
e wher
KRTEMP 74 2005-06-27 17:09:26.0 17625 e appName=:1 and appVersion=:2
KRTEMP 83 2005-06-27 17:09:25.0 1771 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 83 2005-06-27 17:09:25.0 1771 DATE_FORMAT'
KRTEMP 105 2005-06-27 17:09:30.0 3296 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 105 2005-06-27 17:09:30.0 3296 DATE_FORMAT'
KRTEMP 111 2005-06-27 17:09:25.0 4878 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 111 2005-06-27 17:09:25.0 4878 DATE_FORMAT'
KRTEMP 153 2005-06-27 17:09:30.0 31065 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 153 2005-06-27 17:09:30.0 31065 DATE_FORMAT'
KRTEMP 163 2005-06-27 17:09:30.0 3205 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 163 2005-06-27 17:09:30.0 3205 DATE_FORMAT'
KRTEMP 183 2005-06-27 17:09:30.0 3465 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 183 2005-06-27 17:09:30.0 3465 DATE_FORMAT'
KRTEMP 191 2005-06-27 17:09:26.0 5438 select appId from profile_application_tabl
e wher
KRTEMP 191 2005-06-27 17:09:26.0 5438 e appName=:1 and appVersion=:2
KRTEMP 232 2005-06-27 17:09:31.0 5893 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 232 2005-06-27 17:09:31.0 5893 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 232 2005-06-27 17:09:31.0 5893 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 232 2005-06-27 17:09:31.0 5893 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.piece
KRTEMP 34 2005-06-26 18:51:01.0 3629 rename tstore to store
KRTEMP 37 2005-06-27 17:09:25.0 4209 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 37 2005-06-27 17:09:25.0 4209 DATE_FORMAT'
KRTEMP 74 2005-06-27 17:09:26.0 17625 select appId from profile_application_tabl
e wher
KRTEMP 74 2005-06-27 17:09:26.0 17625 e appName=:1 and appVersion=:2
KRTEMP 83 2005-06-27 17:09:25.0 1771 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 83 2005-06-27 17:09:25.0 1771 DATE_FORMAT'
KRTEMP 111 2005-06-27 17:09:25.0 4878 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 111 2005-06-27 17:09:25.0 4878 DATE_FORMAT'
KRTEMP 232 2005-06-27 17:09:31.0 5893 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 232 2005-06-27 17:09:31.0 5893 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 232 2005-06-27 17:09:31.0 5893 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 232 2005-06-27 17:09:31.0 5893 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.piece
KRTEMP 256 2005-06-27 17:09:31.0 2783 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 256 2005-06-27 17:09:31.0 2783 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 256 2005-06-27 17:09:31.0 2783 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 256 2005-06-27 17:09:31.0 2783 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.piece
KRTEMP 9 2005-06-27 17:09:30.0 5436 select * from contact
KRTEMP 34 2005-06-26 18:51:01.0 3629 rename tstore to store
KRTEMP 37 2005-06-27 17:09:25.0 4209 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 37 2005-06-27 17:09:25.0 4209 DATE_FORMAT'
KRTEMP 74 2005-06-27 17:09:26.0 17625 select appId from profile_application_tabl
e wher
KRTEMP 74 2005-06-27 17:09:26.0 17625 e appName=:1 and appVersion=:2
KRTEMP 83 2005-06-27 17:09:25.0 1771 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 83 2005-06-27 17:09:25.0 1771 DATE_FORMAT'
KRTEMP 105 2005-06-27 17:09:30.0 3296 select * from contact
KRTEMP 111 2005-06-27 17:09:25.0 4878 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 111 2005-06-27 17:09:25.0 4878 DATE_FORMAT'
KRTEMP 153 2005-06-27 17:09:30.0 31065 select * from contact
KRTEMP 163 2005-06-27 17:09:30.0 3205 select * from contact
KRTEMP 173 2005-06-27 17:09:31.0 3922 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 173 2005-06-27 17:09:31.0 3922 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 173 2005-06-27 17:09:31.0 3922 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 173 2005-06-27 17:09:31.0 3922 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.piece
KRTEMP 183 2005-06-27 17:09:30.0 3465 select * from contact
KRTEMP 191 2005-06-27 17:09:26.0 5438 select appId from profile_application_tabl
e wher
KRTEMP 191 2005-06-27 17:09:26.0 5438 e appName=:1 and appVersion=:2
KRTEMP 232 2005-06-27 17:09:31.0 5893 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 232 2005-06-27 17:09:31.0 5893 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 232 2005-06-27 17:09:31.0 5893 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 232 2005-06-27 17:09:31.0 5893 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.piece
KRTEMP 256 2005-06-27 17:09:31.0 2783 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 256 2005-06-27 17:09:31.0 2783 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 256 2005-06-27 17:09:31.0 2783 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 256 2005-06-27 17:09:31.0 2783 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.piece
KRTEMP 9 2005-06-27 17:09:30.0 5436 select * from contact
KRTEMP 34 2005-06-26 18:51:01.0 3629 rename tstore to store
KRTEMP 37 2005-06-27 17:09:25.0 4209 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 37 2005-06-27 17:09:25.0 4209 DATE_FORMAT'
KRTEMP 74 2005-06-27 17:09:26.0 17625 select appId from profile_application_tabl
e wher
KRTEMP 74 2005-06-27 17:09:26.0 17625 e appName=:1 and appVersion=:2
KRTEMP 83 2005-06-27 17:09:25.0 1771 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS W
HERE PARAMETER ='NLS_
KRTEMP 83 2005-06-27 17:09:25.0 1771 DATE_FORMAT'
KRTEMP 105 2005-06-27 17:09:30.0 3296 select * from contact
KRTEMP 111 2005-06-27 17:09:25.0 4878 SELECT VALUE FROM NLS_INSTANCE_PARAMETERS
WHERE PARAMETER ='NLS_
KRTEMP 111 2005-06-27 17:09:25.0 4878 DATE_FORMAT'
KRTEMP 153 2005-06-27 17:09:30.0 31065 select * from contact
KRTEMP 163 2005-06-27 17:09:30.0 3205 select * from contact
KRTEMP 183 2005-06-27 17:09:30.0 3465 select * from contact
KRTEMP 191 2005-06-27 17:09:26.0 5438 select appId from profile_application_tabl
e wher
KRTEMP 191 2005-06-27 17:09:26.0 5438 e appName=:1 and appVersion=:2
KRTEMP 204 2005-06-27 17:09:32.0 1478 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 204 2005-06-27 17:09:32.0 1478 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 204 2005-06-27 17:09:32.0 1478 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 204 2005-06-27 17:09:32.0 1478 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.piece
KRTEMP 232 2005-06-27 17:09:31.0 5893 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 232 2005-06-27 17:09:31.0 5893 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 232 2005-06-27 17:09:31.0 5893 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 232 2005-06-27 17:09:31.0 5893 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.piece
KRTEMP 256 2005-06-27 17:09:31.0 2783 select s.username,s.sid ,s.logon_time, s.s
erial#,sql.sql_text fr
KRTEMP 256 2005-06-27 17:09:31.0 2783 om v$session s, v$sqltext sql where sql.ad
dress = s.sql_address
KRTEMP 256 2005-06-27 17:09:31.0 2783 and sql.hash_value = s.sql_hash_value and
upper(s.username) like
KRTEMP 256 2005-06-27 17:09:31.0 2783 'KRTEMP%' order by s.username ,s.sid ,s.s
erial# ,sql.pieceWhy do the connections stay open? Because you haven't closed them.
You answered your own question: obviously closing the ResultSet is NOT the same thing as closing the connection.
When you do a query, you want to get the connection, statement, and result set, load the data from the result set into an object or data structure, and then immediately close them all again in reverse order of creation. You want to keep the scope as narrow as possible. You want to use a connection pool to keep the cost of obtaining a connection down. You should leave caching of the PreparedStatements to the JDBC driver.
% -
Internet connection slows down after a while
I have a wrt160n connected to an arris cable modem. When I set it up it works fine - after a period of hours the internet connection slows down a lot. If I then connect my computer directly to the modem it is is fast again. But to get the signal to the router working fast again I have to reset the modem and power cycle the router. Is there a conflict - is my router rationing access or what?
You should download and upgrade/flash your router's firmware...
Download the Firmware from here
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1350 and click Save Settings...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect... -
Even though thunderbolt is not hot puggable in Bootcamp, is the use of mini displayport to vga/dvi still hot pluggable under Bootcamp?
This is Apple support on the subject
http://support.apple.com/kb/HT4617
Can I plug and unplug devices into a Thunderbolt peripheral that is already recognized?
Yes. That is the best way to add and remove devices from the Thunderbolt chain while Windows 7 is running.
Have you tried?
Maybe you are looking for
-
Problems on installing boot camp on windows vista 64
I've a problem,when I finished installing vista 64,I should install the bootcamp 2.0,I searched many discussions about this.But I can't find the file 'bootcamp64' on my leopard disk(apple\driver\bootcamp64?),I just find the bootcamp.msi,what can I do
-
Blank black screen with just mouse pointer after logging in windows 8.1
First of all On starting the system, it was taking much longer time than usual.. Then after logging in it showed only a blank black screen with white mouse pointer.. had to force shut down (shut down also took longer time).. on starting went to safe
-
Text in header and text in footer in sap scipt ?
how to print header in ist page and footer in last page in sap script?
-
Strange issue in SharePoint Search
I just took over SharePoint farm from other admin who left. After that SharePoint search crawl broke. I recreated the SharePoint search with all the settings. But there is really strange issue happening now. If domain A user log in to SharePoint and
-
Customise Subject Line for Email Notifications?
I am using FormsCentral to receive Course Submissions. Because Gmail groups all emails with identical Subjects & Senders, I need to be able to differentiate the Subject line of the Email Notifications, to include a unique field identifier (such as e