Internet connection through usb port

is ti possible to connect internet from ethernet to usb port for mac book air?if yes how,which things should i need??

You need a USB - to - Ethernet Adapter cable.
Here is a description from the U.S. Apple Store:
http://store.apple.com/us/product/MC704ZM/A/apple-usb-ethernet-adapter?fnode=51

Similar Messages

  • TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

  • I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
    iPad: Unable to update or restore

  • Problems with sharing internet connection via usb

    I have been sharing the internet connection on my iPhone 5 via usb to a PC for a few years. When updating to iOS 8.3 and iTunes to 12.1 (from iOS 6 if I remember correctly) the internet sharing through usb stopped working. Sharing through wifi works and settings are the same as when usb internet share did work. Any idea on how to solve this except downgrading?
    For my troubleshooting, has anyone been able to share internet via usb to PC (or Mac) with iOS 8 / iTunes 12.
    PS I have unliited cellular data and iPhone is my only internet connection at home,

    Mark,
    There is a excellent book that teaches you how to do this (and other things) called Mac OS X Tiger: The Missing Manual (others of course)
    If I remember correctly (book is on loan)
    1: System Preferences>Network>Show>network port configurations (click unlock)
    2: Click>Built in Firewire and drag to the top of the list (why I forget why)
    3: System Preferences>Sharing>Internet>Share your connection from: Built in Ethernet (or what your using for your connection in) >To computers using: Built in Firewire>Start
    4: Mac #2>Hook up Firewire 400 cable>System Preferences>Network>Location>New Location
    5: Show>Network Port Configurations>Drag Built in Firewire to top of list and enable.
    6: I also think you have to enable Personal Web Sharing on the Mac hosting the internet.
    anyway play with it, you'll figure it out. if someone doesn't get to you.

  • Problems sharing internet connection through Airport with a PS3

    Does anybody know how to share an internet connection wirelessly with a PS3? I've tried everything including following directions from the tech support people from both Sony and my ISP (Verizon) and nothing works. Last time I've talked to Verizon I've obtained a IP number from them as Sony recommended and that did not work either. Is anybody out there with a PS3 sharing the internet connection through Airport successfully? I'd really appreciate any help. Thanks.!!
    Message was edited by: pbranda

    Let's double-check your Mac's Internet Sharing settings ...
    To setup for Internet Sharing (Wired to Wireless):
    Setup the Network
    Cable Modem > (Ethernet cable) > \[Ethernet port] Mac > (wireless) > PS3
    Enable Software Firewall
    System Preferences > Security > Firewall
    o Block all incoming connections (enabled)
    Enable Internet Sharing
    System Preferences > Sharing
    o Select "Internet Sharing" from the options in the left column
    o Share your connection from: Built-in Ethernet
    o To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
    AirPort Options...
    o Network Name: <anything you want>
    o Channel: Automatic
    o Enable encryption (using WEP) (optional)
    o Password: (optional)
    o Confirm Password: (optional)
    o WEP Key Length: (optional)
    o Click OK
    o Select "Internet Sharing" again
    o Click "Start" to start Internet Sharing
    o Click Start

  • Updating firmware when I can't get an internet connection through the router

    I am trying to update the firmware for WRT54G V8, but some of the instructions indicate I need to have the router connected and be connected to the internet.  I cannot get an internet connection through the router.  Can I upgrade firmware without being connected to the internet through the router.  (I have had this router for about a year and a half with no problems until now.)

    Yes, you can upgrade the firmware without an Internet connection.
    To upgrade the firmware, first download the new firmware into a computer that you can wire to your router.
    Next, power down your entire network.
    Then wire the computer to a LAN port on the router.
    Disconnect all other wires from the router.
    Power up the router and allow it to fully boot (1-2 minutes).
    Power up your computer.
    Login to the router, and do the firmware upgrade  (it will likely take several minutes).
    Power down your entire network.
    Next you need to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • Error message -1073807298 when connecting through USB

    Hi,
     I am trying to retrive data from an instrument through serial port as well as USB,
     My vi works smoothly while connecting through serial port.
     But when i try to connect through USB Error code-1073807298
     is coming. This error comes when visa try to write to the instrument.
     From visa configure serial port.vi  no error is coming.
     Can someone suggest a method to solve this problem... 

    I get exactly the same error code with a TCP raw socket connection, the weirdest thing is that I actually can read the result of the query. I fixed the problem reading one byte at a time but this is very inefficient (it uses a while loop) and I still get warnings, so I'd like to know if there is a way to fix this or if there is an equivalent of the "Serial Settings: Number of Bytes at Serial Port" for VISA TCP connections....
    This is the WARNING that I get when I read one byte at a time:
    Warning 1073676294 occurred at VISA Read in LV.vi
    Possible reason(s):
    VISA:  (Hex 0x3FFF0006) The number of bytes transferred is equal to the requested input count. More data might be available.
    This is the ERROR  that I get when I set the byte count to 1024:
    Error -1073807298 occurred at VISA Read in LV.vi
    Possible reason(s):
    VISA:  (Hex 0xBFFF003E) Could not perform operation because of I/O error.
    I enclosed the VI for your review,
    Thanx in advance for your help,
    Attachments:
    LV.vi ‏22 KB

  • I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

    I have a PC with a internet connection through a modem and ever since i have had it i have had no connection to the itunes store. And even if I try to update anything it says that i need to check my connection, but my connection is fine. What should I do?

    This almost always indicates your firewall or anti-virus utilities are preventing iTunes from contacting the iTunes Store. Here is an exerpt from "Can't connect to the iTunes Store": http://support.apple.com/kb/TS1368
    Troubleshooting on Windows
    If you haven't been able to connect to the iTunes Store for more than a day —and other customers on our discussion boards aren't experiencing similar issues— a software or internet service provider (ISP) configuration issue may be blocking your access to the iTunes Store. Click here to find out which ports and servers need to be allowed for iTunes Store access.
    Update iTunes to the latest version.
    If you have not done so already, try the steps in iTunes for Windows: iTunes Store connection troubleshootingto troubleshoot iTunes Store connectivity in Windows.
    Firewall issues:
    Windows XP: If you've upgraded to Windows XP Service Pack 2: By default, Windows Firewall is enabled. As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so, see How to enable iTunes in the Windows XP Firewall.
    Windows Vista and 7: As with all firewalls not manufactured by Apple, you will need to configure Windows Firewall to allow iTunes to access the iTunes Store. To do so see, the "Blocked by software firewall" section in this article.
    Proxies can cause issues and should be avoided whenever possible. To disable the proxy built-in to Windows see, iTunes for Windows Can't access the Internet if proxy settings are incorrect.
    If you are receiving a specific error message you may want to see, the "Specific Conditions and Alert Messages" section in this article as needed.
    If the issue still persists, contact your internet service provider and confirm that the ports and servers in this article are enabled over your network.
    The "hosts" file may be blocking the iTunes Store
    Microsoft's article How do I reset the hosts file back to the default? has instructions and a "FixIt" to have Windows try to reset the hosts defaults for you.
    Note: Some workplaces may put internal resources in the hosts file but may also use it to block iTunes Store.
    To create a copy of your hosts file and replace it with an empty hosts file, follow the instructions for your operating system below.

  • Help I purchase an Ipad yesterday I amusing internet connection through a netgear wired to my home computor since yesterday I am unable to open my emails or access my bank account ps I am not technical I am with orange broad band and have followed their i

    Help I purchased an ipad yesterday I am using internet connection through a wired up netgear router through my pc.Since then I cannot open my hotmail emails or access my online banking on wired pc and the navigator on ipad not working.
    I would appreciate help I followed all directions that Orange provided with netgear router

    Something here may help
    http://www.apple.com/uk/support/ipad/contact/
    pick a subject from left hand panel
    and this
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

  • How can i use labview for communicating with pic18 microcontroller through usb port?

    Hi all,
    I want to make a DAQ card using pic 18 microcontroller which has a built-in usb protocol. I have the firmware of this
    controller which will  make it as a usb device. How can i receive the analog voltages from this DAQ card in Labview? or i mean to say that how i can communicate labview with the Pic 18 microcontroller through usb port? I have also the
    mpusbapi.dll file which is for Visual C++. Can i make changes in this dll file to make it compatible with labview?

    Which labview version do you have. Up to labview 7.1 it was no USB raw communication options. I have heard it did not work well in 7.1, but from 8.x most of the errors were fixed.
    Here is a link it should be useful http://forums.ni.com/ni/board/message?board.id=170&message.id=340676&query.id=365864#M340676
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • "Device connected to USB port has malfunctioned and is not recognized"

    When I hooked my nano up to my computer today, the screen went black with a silver apple icon on it...it's still all lite up and on...but it won't change from that screen.
    And my computer says, "Device connected to USB port has malfunctioned and is not recognized", so it won't show up in iTunes.
    What do I do?? Thanks.
    Windows    

    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.

  • Mac pro does not recognize ipad device when connected via usb port, suggestions?

    mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions?  itunes 10.7

    Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
    The most likely issue:  Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

  • HT202731 Unstable operation when 2 or more USB devices connected to usb port on a MacBook Pro running Yosemite

    I have tried connecting a number of devices to my MacBook Pro but I have found if I try to connect 2 or more using either usb ports or a usb hub the computer reports 'disk not ejected properly' and sometimes it will fail to recognise the device and remove it from the desktop or it stalls operation and I have to turn the computer off at the power button.
    I have tried erasing the hard drive and reinstalling the operating system.
    I have done various types of reset suggested by apple support.
    The computer has been to an Apple dealer who has tested the hardware but found nothing due to the intermittent nature of the problem.
    I have operated the computer with only the software originally installed on it present.
    Could it be possible that a virus could be present on the usb devices I am trying to connect?
    My computer is a MacBook Pro (13-inch, Mid 2012)
    Processor 2.5 GHz Intel Core i5
    Memory 4 GB 1600 MHz DDR3
    Startup Disk Macintosh HD
    Graphics Intel HD Graphics 4000 1024 MB
    Operating System X Yosemite 10.10.1
    Devices I have connected to USB ports all USB 3.0 compatible in a variety of combinations:-
    7 port superspeed USB 3.0 hub (powered).
    4 port Inateck USB 3.0 portable hub (not powered).
    Buffalo ultra portable 500Gb USB 3.0 hard drive.
    Seagate Expansion portable 500Gb USB 3.0 hard drive.
    Seagate Expansion desktop 2Tb USB 3.0 hard drive (powered).
    Seagate Expansion desktop 3Tb USB 3.0 hard drive (powered).
    ScanDisk Cruiser Edge 16Gb USB stick.
    ScanDisk Cruiser Edge 32Gb USB stick.
    Hewlett Packard 16Gb USB stick. (This causes an instant crash now.)

    Why?
    - Because when I'm editing/ rendering lots of HD video everyday, I don't want to share system resources between virtual machines... I want the entire system's resources devoted to what I'm doing.
    - I don't want to spend anymore money than I have to in order to buy one of the faster virtual systems. Not to mention, I've had a bad experience with Parralels in the past and I'd rather not use one again.
    - I really don't want to clutter up my system anymore than I have to for a project that's only going to take a few weeks.
    - I don't mind swapping hard drives... it takes two minutes, and I have an empty ssd just sitting on the shelf.
    So, back to my original question. Can I just swap the computer's drives, then install Ubuntu on the second drive and be good to go without any harm to my MacBook Pro or OSX on the other drive (which wouldn't be connected when Ubuntu is running)?
    Thanks.

  • Is there way to share Air-Port Wi-Fi connection through ethernet port?

    I was wondering if anyone could help me out with this, I have wireless network in the building, and is there way to configure Mac Mini to share Air-Port Wi-Fi connection through ethernet port (feed Vonage adapter)?

    Have you actually shared wi-fi to ethernet on a Mac? I ask because it is not usually that simple, it is a more complicated configuration. Most folks who do it the way you described get a self assigned IP and nothing connects.
    See my comment here;
    http://discussions.apple.com/thread.jspa?messageID=12585788&#12585788
    I have a Vonage phone adapter and Vonage does not provide the info that you need to hand configure these boxes, I have tried in the past with the one I have with a US phone number from here in Mexico.
    Dah•veed

  • While charging through usb port i am getting small shock at the edges of my iphone 5??why is this?

    I am getting small shock when charging my iphone 5 through usb port?why is this??any solutions??

    Bring the phone and USB cable to Apple for evaluation

Maybe you are looking for