Internet connection with GPRS/EDGE, but no WiFi and NOT on a Blackberry supported network

Hello,
New 8900 owner here. Living in Vietnam at the moment...and I have a prepaid plan that includes GPRS. It always worked fine with prior devices, so I am confident in the service.
First issue:
I don't think the provider offically supports BES traffic...so I may have to swtich. Is anyone aware of a way around this? (don't want to change my phone number)
Second issue:
For just basic web browsing...I want to use my GPRS connection. The phones shows it connected via the service provider. But, when I launch the web browser it says this requires a WiFi connection. Why would that be?
Any help is really appreciated!
Thank you.
David

Hello
For the second issue.
you have to change the browser settings as follows.
Options --> Advanced Options --> Browser
then change the Default Browser configuration to internet browser or WAP browser.
Regards
Chamikara
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.

Similar Messages

HT4157 My iPad. Oonnects to other wifi it used to connect to my work wifi but it will. Not connect now what is work I am connected with my iPhone but iPad will. Not connect or it says safari can not open page

I can connect my iPhone to my work wifi but when I try to connect my IPad it will not connect. It says safari can not open page. What's up with that I have used IPad connected to work wifi before

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

N connection with the notebook 72Kbps to 150Kbps and not

Why can not I connect my notebook to 150kbps using the airport extreme 5th generation?
Had a TPLINK N ever connected the same laptop to 150Kbps.
Already changed the channels but not resolved.
Could anyone help me?
Thank you.

The maximum connection link rate that can be established between a wireless router and a wireless client depends on a number of factors. Your 5th gen 802.11n AirPort Extreme base station supports 3x3 transmit/receive) streams per radio. That would allow a maximum link rate of 225 Mbps on the 2.4 GHz band and 450 Mbps on the 5 GHz band.
The other factor is what your notebook's wireless adapter is capable of. If it doesn't support 3x3 but, let's say, 1x1 then this maximum link rate will be reduced significantly. However, even if equipped as such, you should still see maximum link rates of 65 Mbps (2.4 GHz) & 150 Mbps (5 GHz). Please note that the link rate does NOT represent the actual throughput that the wireless connection will produce. They are only good as a relative performance indicator to what may be possible. Reaching this threshold will also depend on a number of factors including wireless signal quality, Wi-Fi interference, and distance between the router and the client.

Sharing internet connection with a PC

Hi, I have a macbook with the latest OS X. I want to know if it is possible to share my PC's internet connection with my laptop, either through wifi, bluetooth, or firewire. I am running XP on the PC. I will not have a wireless network up, and I would like to have internet on both my mac and my pc. Is there a device that i can hook into my PC to broadcast a wifi network. It doesnt have to have a large range, I'll be using my laptop close to my desktop.
Macbook Mac OS X (10.4.7)

Really cool feature alert. Under System Preferences-->Sharing you can have your Mac share to any computer connected via Wi-fi, Firewire, or Ethernet. Whichever adapters are not used for the Internet connection are available.
It saved me lots of grief setting up some stubborn Windows boxen that only loaded the firewire driver as the OS was setup.

My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

I have an old PowerPC and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same router, but the old Mac connects with full bars, but the MBP struggles with only 2. Pls help, thanks!

I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!

BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name:          Power Mac G4
Machine Model:          PowerMac3,5
CPU Type:          PowerPC G4 (2.1)
Number Of CPUs:          1
CPU Speed:          800 MHz
L2 Cache (per CPU):          256 KB
Memory:          768 MB
Bus Speed:          133 MHz
Boot ROM Version:          4.3.3f2
Serial Number:          XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host>

I want to share internet connection with external IP

Hello, guys.
I am running 2010 2.4GHz Mac Mini with 2GB RAM. My inernet cable goes directly to my Mac with no router whatsoever. Here's my problem:
I'm trying to set up a game server (Minecraft). So I need port 25565 to be opened. I managed to do that on my Mac and it's working perfectly. But now I want to host that server on my laptop (running Windows 7).
When I share my internet connection with that laptop and run the server and then check the port using canyouseeme.org I get message that that port is closed, connection refused.
After few hours of no results (adding Firewall rules, trying to port forward (before I see that port forwading can be done only using a router)) I call up my ISP and the guy tells me that when my Mac shares the internet connection, my laptop's IP is internal thus making the server that it's running invisible to others. My question is:
How do I share the Mac's connection via WiFi so that the laptop gets external (visible to the public) IP?
I really hope I made my problem clear.
Thanks.

Get a router.
The internet is a dangerous place for a computer without a properly configured firewall.
Also, when you get said router, look at the Logmein Hamachi VPN. It provides a point to point vpn connection which should resolve your minecraft issues.

HT4628 some times my internet connection will say it has timed out and I can not connect. but my friends mac never has a problem. How can I fix this?

some times my internet connection will say it has timed out and I can not connect. but my friends mac never has a problem. How can I fix this?

Just confirming, when you have the trouble, the wifi icon is grayed-out or has all bars showing? I believe you are saying that is is grayed-out - not connected to your wireless router.
I have a Mini that started to lose connection to the Internet after the 10.7.3 update but still showed the wireless as connected. If I pinged the wireless router, I would get a quarter of the packets failing to return. The router was a Netgear that supported 802.11N connections. As a test, I set it to 802.11G (54MBps) maximum and the Mini worked fine for a week - no dropouts. And for the other devices that did support 802.11N, while there was a noticeable delay with downloads and pages loading, they still worked.
As another test, I changed the Netgear router to a Billion 802.11N model and the Mini has not had a problems since. (It is still using 802.11g). So it could be your router that is causing trouble for your Mac.
Have a look at some of the More Like This postings in the right column. There has been a number of Mac owners experiencing wifi connection issues and some very good suggestions as to how to resolve their issue.

How to switch off the internet connection via GPRS by iphone 3G

how to switch off the internet connection via GPRS by iphone 3G?
need help.
thanks

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

My 2007 mac pro has a slow internet connection with lion

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

Using time capsule to share internet connection with a pc via ethernet

Hi,
I've recently acquired a time capsule and was wondering if i could use it to share a wireless internet connection via ethernet to my non-wireless (windows 7) pc?
My current situation is that i have a wireless modem/router that shares my internet connection wirelessly with my mac mini.
I have a pc without a wireless card that i want to connect to the wireless network so i was wondering if it was possible to attach the pc and the time capsule with an ethernet cable, then connect the time capsule to the wireless network and share the internet connection with the pc.
Can anyone tell me if this is possible, and if so how?
Thanks

Welcome to the discussion area!
IF...your wireless network is now being created by another Apple "n" router like an AirPort Extreme, AirPort Express or Time Capsule, it would be possible to do what you want to do.
But the Time Capsule would not be compatible for what you want if your wireless is created by another manufacturer's router. The Time Capsule could "join" this wireless network so that backups would occur over wireless. However, when the Time Capsule is configured this way, the ethernet ports on the device are not active, so this would not help with the ethernet connection that your computer needs.
A new AirPort Express 802.11n would do what you want. It has the capability of joining virtually any wireless network and the ethernet port can be enabled using the ProxySTA feature, so it would work for your purpose.

TC 2 TB A1409 Wan internet connection no longer working but light is still green?

TC 2 TB A1409 Wan internet connection no longer working but light is still green?
My TC and modem have been up and running for at least the last 2 years without any issues.
It recently started acting up and I would have restart it as I had no internet access. All of a sudden My TC stopped connecting to internet regardless of restart. Utility shows i have no internet connection. I had all the correct green lights on my modem. I figured it might be the modem and connected directly to single ethernet port in modem to my mac book and it worked. When I reconnect modem to TC and restart Modem, TC still shows no internet connection in utility even though I'm getting green sync light on TC.
Help Please.
I'm out of warranty, I have not reset to default yet, Im not sure if I will loose my TC back up data.
please advice
Remy

The Gen4 has some nasty faults.. mostly unrepairable...
If the WAN is gone it becomes pretty well useless at least in its current role as router.
You might still be able to plug it in by ethernet to a LAN port in bridge.
Do try a full factory reset.. always worth a go.
No files will be lost on the hard disk.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Check the ethernet LED is going on.. both on the modem and the TC WAN port.
Do you have any applecare on a computer? If so it might cover the TC.. the rules are complicated but if the TC was bought within 2years before or after the computer it is covered up to max of 3years. You can still get coverage therefore if the TC is over 1 year but less than 2 years by buying applecare now on a computer or an Apple TV which is not too expensive. You can sell off the Apple TV without even opening it.. but use the applecare on it to get your TC replaced.
Only the very first Gen4 will be up to 3years.
Did you have a lightning storm or something btw?? Sometimes the modem can survive and pass the parcel to the TC which seems rather fragile.
There is also a trick to test..
You must have v5 airport utility.. any older Macs, or windows computer you can load on 5.6 utility .. even dual boot/parallels mac.
Go to the WAN setup.. and set the ethernet port to 10mbit half duplex.
Sometimes a damaged port can still manage the slowest speed.. by magic.

Sharing internet connection with powerbook and nintendo wii through airport

i have been trying to share my internet connection from my imac to my powerbook and nintendo wii. i've been unable to accomplish neither. i've opened the sharing preferences, chosen "share your connection from built in ethernet" which is how my imac is connected to the internet, and then chosen "to computers using airport". if i then set my airport options to automatic channel, encryption using 40 bit wep and set a 5 character password as it says if you "plan to share your internet connection with non-apple computers", (and then turn internet sharing on) shouldn't i be able to connect either/both my powerbook and my nintendo wii? or is it necessary to have some other piece of hardware or go through some other steps?
thanks in advance for any help.

I got a macbook for college and I had the same problem with connecting my Wii to the macbook's connection. But lo and behold, the internet's a wonderful place! I tried this out (http://www.macosxhints.com/article.php?story=20070514152251515) and it worked! I'm not sure about the powerbook bit though, sorry. Hope it works for you too.

Internet connection with GPRS/EDGE, but no WiFi and NOT on a Blackberry supported network

Similar Messages

Maybe you are looking for