Internet connections on Red Hat linux on Dell

People,
Can someone help me with how to configure internet connections on RHEL 3.0 on a Dell inspiron laptop?
The problem: i can't connect to the internet on a Dell laptop that has RHEL 3.0 and i intend to install Oracle 10g on it.

here is the secret:
http://linux.oreillynet.com/pub/a/linux/2003/09/04/oracle_install.html
Joel P�rez

Similar Messages

Oracle 8.1.7 on Red Hat Linux on a Dell Poweredge

We have a Dell PowerEdge 6400 server with PERC 2/DC raid
controllers.
We have installed Red Hat Linux 6.2.
According to the installation guide in order to install Oracle
8.1.7 we need to recompile the Kernal to get to version 2.2.19-
6.2.7.
Recompiling the Kernal causes a failure in the Raid controllers.
I realise that this isn't strictly Oracle but I wondered if
anyone had met this problem before. It appears virtually
impossible to configure this combination to support Oracle.

Yes there is a lot of information out there. Oracle 8.1.6,
8.1.7, 9 on Linux 6, 7, 9.
Which glibc? binutils? compat-libs?
For 8.1.7 on Redhat 9
Please try: http://www3.sympatico.ca/arothmel/oracle/817.html
Still evolving. Feedback welcome :)

Oracle 8i Internet for Red Hat Linux

Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you

Let me try again. I was to fast with the enter key. There is a known bug with the installer. The work around is to use the runInstall.sh that is in the subdirectory /install/linux. If you have your environment variables setup correctly this should work, also you need a minimum of 128 meg of ram on the machine.
Hope this helps.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by hhtham ():
Hi all,
Can any one help me on this. I have setting up Red Hat Linux 6.2 and JRE 1.1.6v5-glibc also installed on /usr/local/jre directory. But when I try to run "runInstaller" from the oracle cdrom. I have the following error:
Initializing Java Virtual Machine from /usr/local/jre/bin/jre Please wait ...
Error in Create OUIProcess(): -1
:Bad address
Any one can tell me what is the problem.
Thank you<HR></BLOCKQUOTE>
null

ORA-01017: OS Authentication on Red Hat Linux 6.2 and Oracle 11gR2

Hello
I am trying to eanble OS Authentication on Oracle 11.2.0.3 installed on a Red Hat Linux Server 6.2 and it just does not work. When I try to login I always get the error ORA-01017: invalid username/password; logon denied
I have set the following Oracle parameters:
remote_os_authent = TRUE
os_authent_prefix = OPS$
and i have created a linux user "oracle" and the Oracle user "OPS$oracle".
I know that the parameter remote_os_authent in 11g is depricated but i thought that it still should work, just an error messages occures then i start the database but it runs as usual, just the OS Authentication does not seem to work.
Does anyone knwo where the problem could be?
Oracle said that remote_os_authent is depricated because as it is risky, i know that, but my database is in a secure environment without any connection to the internet. What other way would there be without using remote_os_authent?
Thank you very much for your help.
Regards Bernhard

Thanks for the link, i found that i used a case sensitive user name as i created the user with "OPS$USERNAME" and this was why i cound not connect with that user.

Failed Installation of Oracle8i on Red Hat Linux 7.0

Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.
null

Richard,
It's a glib problem. 8i uses the glib 2.1 libraries, while RH7 uses the 2.2. There is a patch available from oracle support, or you can find a solution that has worked for me twice on the otn discussion forum.
Cory Franzmeier
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Richard Yip ([email protected]):
Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.<HR></BLOCKQUOTE>
null

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

FMS RED HAT LINUX PROBLEMS

Hi,
I hope that someone can help me. I am having so much trouble
getting FMS to work it is unbelievable.
We have installed FMS onto virtual server running Red Hat
Linux Enterprise 3. We have managed to get
FMS running but cannot get a connection to work. This is
using the sample application 'textchat'. here is a summary of what
we and a coleague have done.
1) I have linked the libraries to obtain the desired
libssl.so.4,
libssl.so.6, libcrypto.so.4 and libcrypto.so.6.
2) I have installed the lates mozilla firefox and the latest
flash
plugin (together with the update-flashplugin)
3) Then I have created the installation by adding the
following entry:
/etc/redhat-release together with it's content
4) Then I have performed a regular fms installation together
with adding
the licensing etc. I have also copied the textchat main.asc
file and the
textchat pages (swf and html)
So basically we have added all the missing libraries (that we
know of...cmon adobe get it together £3000
and you don't even include relavent libraries) .
If any body has any ideas please reply. we are almost a month
down the line struggling with this software.
Thanks for an help
Paul

Got Oracle Grid Infrastructure 11.2.0.3 to work on Red Hat Enterprise 6.3 Linux with out using asmlib and oracleasm.
SQL> alter system set asm_diskstring='/DATA/','/FRA/' scope=both;
SQL> show parameters asm_diskstring
NAME TYPE VALUE
asm_diskstring string /DATA/, /FRA/
SQL> create diskgroup FRA external redundancy disk '/FRA/';
Diskgroup created.
SQL> select name,state, total_mb, free_mb from v$asm_diskgroup;
NAME STATE TOTAL_MB FREE_MB
DATA MOUNTED 500,000 494,000
FRA MOUNTED 200,000 194,000
The issue I had encountered that was that I tried to install and configure Grid Infrastructure the way that I had previously using Red Hat Linux 5.5, 5.8 and then 6.0. I had decided to install Red Hat Linux 6.3 which does not support Oracle asmlib and oracleasm to keep up with the technology and to be innovative.
Oracle has added significant enhancements to Grid Infrastructure. The only way to become aware of these enhancements is to "Do It". I've documented this implementation and will now

Red Hat Linux Enterprise 5 64bit and Enterprise Manager 10.2.0.3 Install ?

Appreciate specific steps to ensure that Oracle Enterprise Manager 10.2.0.3 is installed as baseline for upgrade.
Red Hat Linux Enterprise 5.2 64bit.
The major problems are with the Configuration Assistant Web Cache during the Install. It fails with OUI-25031.
The configToolFailedCommands script contents is:
oracle.sysman.emcp.agent.AgentPlugIn

The root cause of Oracle Grid 10.2.0.3 did not install successfully was because of a Network Configuration Issue. i.e., some strange IP was being referenced over the internet and mapping it to my hostname of my server. I performed a "dig hostname" to see what ip was being associated with my so-called unique hostname. After fixing that problem and removing all of Oracle, I only had one warning with OPMN not starting. I discovered additional rpms that needed to be installed and all is good now until the next opportunity.
Learned Lesson: Pay Very Careful Attention to all configuration components and document as you go to ensure that you have your process documented.

How to start SQLPLUS in oracle 10g which install on Red Hat Linux AS 4

I install oracle 10g on Red hat linux enterprize AS 4. but i can not start SQLPLUS. I could not login to grid control. When installation, some agents installations are fail. what can i do? please help me out.

I install oracle 10g on RHEL 4. But error occure in cofiguration assistant.
following assistance not configured (which are recommended):
Oracle Net Configuration Assistant - fail
HTTP Server Configuration Assitant - skipped
Java Security Configuration Assistant - skipped
OC4J Configuration Assistant - skipped
Web Cache Configuration Assistant - skipped
Oracle Instance Configuration Assistant - skipped
Oracle Database Configuration Assistant - skipped
OC4J Instance Configuration Assistant - skipped
OPMN Configuration Assistant - skipped
Register DCM Plug-ins with EM - skipped
Application Server Control Configuration Assistant -skipped
DCM Repository Backup Assistant - skipped
Enterprize Manager Reposotory Creation Assistant - skipped
Log Details given about "Oracle Net Configuration Assistant" as
/usr/app/oracle_sw_owner/oracle/product/10..0/EM10g_1/oracle.swd.jre/bin/..
/lib/i686/native_thread/libzip.so : symbol errno version GLIBC_
Unable to initialize threads:cannot find class javalang thread not define in file libc.so.6 with link time referance (libzip.so)
could not create Java VM
configuration of assistant "Oracle Net Configuration Assistant" fail
When try to run sqlplus from xterm, it gives an following error :
$ /usr/app/oracle_sw_owner/oracle/product/10.1.0/EM10g_1/bin/sqlplus
Message file sp1<lang>.msb not found
Error 6 initializing SQL*Plus
After installation there is an information is given for Enterprise Manager Grid Control and it gives an url as http://localhost.localdomain:7777/em. But when i try to connect it gives an error massage as "The connection was refuse when attempting to contact localhost.localdomain:7777"
Same situation when i try to connect Enterprise Manager Application Server (its url: http://localhost.localdomain:1810). It gives an error massage "The connection was refuse when attempting to contact localhost.localdomain:1810"
What can i do in this situation? Please help me out.

DB lookup problem with Sun One App. Server 7.0,MySQL3.x - Red hat linux 7.2

Hi Group,
I have deployed my project in sun one application server 7.0 installed in red hat linux 7.2 and database is mysql. Its working in fine in normal conditions. I could not able to get connection from datasource after I kept my server 10 hours ideal. Again its working fine once I restarted the server. Please give me any solution to prevent this.
The same project is working fine under all conditions in Sun one app server 7.0 installed in windows 2000 server without any look up probem. I Got this problem only in linux OS.
mysql datasource class com.mysql.jdbc.jdbc2.optional.MysqlDataSource
please find the below code..
Context ctx = new InitialContext();
Datasource testDS = (javax.sql.DataSource)ctx.lookup( "jdbc/testDS");
Connection con = testDs.getConnection();
connection pool settings
<jdbc-connection-pool steady-pool-size="8" max-pool-size="32" max-wait-time-in-millis="0" pool-resize-quantity="2" idle-timeout-in-seconds="0" is-isolation-level-guaranteed="false" is-connection-validation-required="false" connection-validation-method="auto-commit" fail-all-connections="false" datasource-classname="com.mysql.jdbc.jdbc2.optional.MysqlDataSource" name="testCP">
<property value="localhost" name="serverName"/>
<property value="3306" name="portNumber"/>
<property value="root" name="user"/>
<property value="test" name="databaseName"/>
</jdbc-connection-pool>
Regards,
Hari haran

My team solved the problem and I thought that we would share.
The version of Xalan that was packaged with the JRE, that is installed by the Sun One app server, was at least 2 versions out of date. Updating the Xalan package solves the issue and the WAR file now works.
Again, this appears to be only on the Linux version as the package deploys and works perfectly on the Windows version.

Missing Listener.ora after installing 8i on Red Hat Linux 6.1

Hi
After Installing Oracle Enterprize Edition on Red Hat Linux 6.1(Using two patches viz jre1.1.6 and linux_815patches)& created default database with sid ORCL.But listener.ora is missing in $ORACLE_HOME/network/admin.
So showing error when ever trying to start lsnrctl service.
What is the reason ? How can you we get default listner.
Is there any other way to connect client and server without listener.ora.
please reply immediately.
null

Create and configure it. See Section 5:
http://homepages.tig.com.au/~jmsalvo/linux/oracle8i.html

TD340 Red Hat Linux 6.4 during start up give Kernel Panic

I am a newbie and please forgive my newness
I recently bought a TD340 with 32GB Ram, OB SAS RAID 300.
While using the ThinkServer EasyStart up to configure the installation of Red Hat Linux 6.4. I am able to finish the installation successfull, however, after the installation is completed and and Linux 6.4 boots up, in the middle of the start up a I get the following message:
Kernel Panic - not syncing - attempted to kill
Pid: 1 comm: init not tainted 2.6.39-400.17.1
Call Trace:
and it nevers boots up sucessfully.
Any help would be appreciated.

It clearly mentions its bootstrap issue in Java stack. The bootstrap log files can be found in /usr/sap/<SID>/JC<XX>/work/ folder.
dev_bootstrap* ; log_bootstrap* ; jvm_bootstrap*.
In one of these files, it will be mentioned, synchronization exception...Database initialization failed.
90% of the issue is caused dude to Database not getting initilized or its not connected or userauthorizations missing or driver class secured in the Secure store is incorrect.
Troubleshooting J2EE Engine 6.40/7.0 Bootstrap Issues
SAP Note Number: 997510
Check this note, you will get all the answer!!
And award points if it helped.
-Subbu

IAS9i Relase 1 on Red Hat Linux 8

I am trying to install IAS9i Relase 1 on Red Hat Linux 8. I connect with user oracle and tried to start runinstaller but it simply did not start.
Do I have to install something prior installing ias.
Thanks in advance.
Zulqarnain

Did you check the prerequisites in the installation guide?
I believe that 9iAS Rel. 1 is not supported on Red Hat Linux 8, only 7.1 or Red Hat Enterprise Linux AS/ES 2.1.

Memory Problem with Oracle10g R2 and red Hat linux 2.4.21-37.EL

Hi All.
i've a 64Bit red Hat Linux 2.4.21-37.EL , 5GB Ram , 3GB Swap Space.
Oracle10g R2. i've 2 prodection database each is having 1400MB of SGA.
when i check the free meory it shows only 12mb of ram is free..why..?
and in swap space it's only 200mb is used...why..?
when i check the dbwither is taking 1.2GB of RAM why..?
can anybody help me in this ...how to get free memory or configure os level to get more free memory.
Sarit
[email protected]

Linux uses Swap space to run applications. The RAM available may not be enough to run the applications so OS swaps the program between RAM and the swap space to run applications.
You can see your swap partition being used as the swap space with:
cat /proc/swaps
Regards,
Senthil Murugan

Error message while installing JDK on RED HAT - linux interprise 5

Hello!
I have got an error message while installing JDK on RED HAT - linux interprise 5:
[user@localhost Desktop]$ cd jdk-6u22-linux-i586-rpm.bin ./jdk-6u22-linux-i586-rpm.bin
bash: cd: jdk-6u22-linux-i586-rpm.bin: Not a directory
[user@localhost Desktop]$ ./jdk-6u22-linux-i586-rpm.bin
Unpacking...
Checksumming...
Extracting...
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP ([email protected]).
inflating: jdk-6u22-linux-i586.rpm
inflating: sun-javadb-common-10.5.3-0.2.i386.rpm
inflating: sun-javadb-core-10.5.3-0.2.i386.rpm
inflating: sun-javadb-client-10.5.3-0.2.i386.rpm
inflating: sun-javadb-demo-10.5.3-0.2.i386.rpm
inflating: sun-javadb-docs-10.5.3-0.2.i386.rpm
inflating: sun-javadb-javadoc-10.5.3-0.2.i386.rpm
error: can't create transaction lock on /var/lib/rpm/__db.000
Installing JavaDB
error: can't create transaction lock on /var/lib/rpm/__db.000
Done.
What is the problem?
Thanks!

Good point.
Moderator action: thread locked.

Internet connections on Red Hat linux on Dell

Similar Messages

Maybe you are looking for