Internet connectivity for wireless devices on homefusion

I am having an issue with my homefusion router. I can connect my wireless device (smartphone, kindle, etc.) but I cannot get internet connectivity. Anybody have any suggestions before I have to call support?
Thanks

Hi JLovell,
It's great that you're able to get devices connected to the HomeFusion. This means the device is broadcasting the service to you. By not being able to actually browse the web, this means that the service is being stopped by something else. We will need to verify the account is setup right on our end of the system (activation successful and right plan setup). Once that's done on our end, you can reboot and that's the only step that can be done on your end.
Thanks,
MariaC_VZW
Please follow us on Twitter @VZWSupport

Similar Messages

Do you have to have an internet connection for the device to work?

Must connect to the iTunes store to authorize account, every time I use it. So I have to be on the internet just to stream from my iTunes library, I can't just stream through my router? I know this seems silly, but we can't get broadband at my house. We use mobile mifi as our internet connection, which tends to fade in and out. We have a wireless router that we run our printers through, I had figured this would work fine since I thought the device only had to recieve a wireless signal from the router which it can. I can access all the content in my library fine, I just can't play it. It works fine through my mifi until the signal changes, but I don't want to use all my data just to stream through this device.

I understand that data is purchased from the carrier, my question was that there are many concerns that lead me to believe that there might be a problem with wifi and that I don't want to have to buy data from my carrier I prefer to use the wifi from my home computer. Reviews are everywhere, I don't make this stuff up but I do my homework

No internet connection for wireless broadband

Hello,
I have the HP TouchSmart IQ508A, Running Vista, 64 bit, SP2. on startup i get the same message that it cant find the bluetooth drivers. tried downloading from HP web site but it doesnt work. also now i can't connect my wireless broadband dongle. it istalls correctly but then wont show any signal or sometimes it shows signal but wont connect. it def works on other computers. i rang tech support for the dongle and they can't fault it and even offered a refund saying it was my computer at fault.
What can i try to fix these problems Please help!!!

Shannon561 wrote:
Hello,
I have the HP TouchSmart IQ508A, Running Vista, 64 bit, SP2. on startup i get the same message that it cant find the bluetooth drivers. tried downloading from HP web site but it doesnt work. also now i can't connect my wireless broadband dongle. it istalls correctly but then wont show any signal or sometimes it shows signal but wont connect. it def works on other computers. i rang tech support for the dongle and they can't fault it and even offered a refund saying it was my computer at fault.
What can i try to fix these problems Please help!!!
I suggest removing the driver via Device Manager, then re-installing the drivers from HP Recovery manager.
Make sure the bluetooth dongle and the drivers are compatible with Vista 64bit.
I have more HP devices than you'd expect.
1 HP TouchPad 32 GB with Android
2 HP Touchsmarts (310-1000z and IQ527)
2 HP Printers (J6480 and J5750)
1 Laptop (HP DV6253CL)
Have at least some experience in each of those devices, and i'll do my best to help you.
Kudos if I helped!

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have utility

I just set up the airport wireless modem - with a comcast internet router - all wireless device connect seemlessly (3 Iphones, Mac Air, and a Sony Laptop) but my IPAD 1 no longer connects. It tries to but never connects. I have reset it and have airprot utility app downloaded on my IPAD - it shows the modem and the internet no connected?

Do you mean an Airport Extreme Base Station connected to a Comcast Modem?

Sporadic Rotating Loss of Internet Connection for Just Some Devices

Hi,
We've been having a problem where one or two of our devices (phones, laptops, iPads, Apple TV) lose internet connection for 10-30 sec at a time, while the others are fine.
As best as I can tell it's a full loss of connection, not just something running very slowly due to us pushing the bandwidth limits. I've experienced the latter elsewhere and this manifests very differently. It will instantly and fully disconnect a person from an online game or drop a skype call without the accompanying prolonged lag or distortion of bottlenecked bandwidth.
It happens at all times of day, and does not seem related to our peak times of bandwidth usage, nor the general public's peak times of usage.
We should have enough bandwidh for our usage, and usually we do. Our system is 25/25 Mbps and during our peak use at most we would probably have 1 laptop gaming, 1 HD video stream, and 2 non-HD streams. However, like I said before, the problem seems unrelated to overall bandwidth usage. The same problem occurs even at midnight when our local usage is minimal.
Overall we have 6 laptops, 5 phones, an iPad, 2 microcell signal boosters, and Apple TV, in total connected to the FiOS. We have a property with tenants where the signal is distributed via 3 WiFi routers and one direct ethernet cable to my laptop, and one to the Apple TV.
It happens on devices that are both connected through the WiFi (wife's laptop, phones, iPad) and ethernet (my laptop, Apple TV). It can happen with devices that are a few unobstructed feet from the WiFi router. However, it anecdotely seems to happen more on our phones than laptops.
My hunch is it is something outside our local network. This is because our equipment and usage has basically remained unchanged over the last couple months. (We got one new microcell tower for a different carrier, one new wifi router, but overall same # of people and patterns of usage.) And yet the problem seems to be getting worse. Back in probably early November I don't remember this problem occuring at all.
My second best guess is there are more devices connected to the network than it can handle simultaneously, and it rotates which gets kicked off. Maybe this was occuring before but we didnt realize it.
My third guess is it has to due with signal interference with the various WiFi routers and microcell boosters. However, this seems less likely since it also affects devices connected via ethernet cables.
Any thoughts or advice is much appreciated! Thanks!
-Ned

Ok, so in the mean time we decided to upgrade our service so I've only tried this solution now.
My problem though now is I can log into 192.168.1.1, then give my verizon admin password, and then set my channel preference. That seems fine for changing the main network input and wifi router (call it A).
However, we have another wifi router (call it B) which is fed from A via a cable. I cannot figure out how to change B's wifi channel. Therefore I worry if we have only switched A, since A feeds B (as well as the 2 microcells) they will all still be on the same channel and therefore still interfering with each other.
I have tried www.routerlogin.net (and .com) as written on my netgear router and I get "http://searchassist.verizon.com/" telling me "Sorry, We could not find www.routerlogin.net". I have also tried logging into wifi router B via all the 192.168.1.X addresses I see listed on the Verzion account when I log in via 192.168.1.1 (in total I tried all the 192.168.1.[1-24] options).
Thanks for the help!

My PC is connected to my airport by Ethernet. I can connect to the network, but not the internet. My wireless devices can access the internet

My PC is connected to AirPort Extreme by ethernet, I can access the network, but not the internet. The wireless devices on the extreme can access the internet

Hey DM,
Is the Wireless(WL) router signal coming through the wired-router?
My ISP requires that my Wireless Router is identified from their end. I use AirPort Express, so they need its MAC address from the router. Without that, my network will show up, but my ISP doesn't recognize it and won't allow it to route he internet. I don't know your exact situation though.
Can other wireless computers access the internet? If they can through the WL router, then it might be the MacBook. If they can't, then you might want to contact your ISP and ask if they can see your wireless router?
Let us know.
Adam

Printer klling internet connection for all wifi devices in office

Hi!
We bought office jet 8600 pro and connected it to the main office desktop computer through ethernet cable. This main computer is also connected to wifi router.
All other laptops in office are using wifi router for internet and for printing.
As soon as we installed new printer it started to conflict with alll wifi devices in office. Basically all laptops and phones loosing internet connection for 2-15 minutes. Usually when somebody from main computer is using printer.
I read in another thread about similar problem and tried to fix this by checking firmware version of router and making a static ip for printer. I put printer to 192.168.1.250. It didn't work, internet keep going down. As experiment i made a static ip for my own laptop too -192.168.1.50. it didn't work too. Need help. Thank you!
http://www.estateblock.com - Real Estate Startup helping homebuyers and homesellers all over Canada.
Real Estate Search Engine .

Sorry. Actually we have 2 routers. First one is working as a connector for ethernet and another one is a wifi router. Printer is connected to the router(connector). Wi-fi router is connected to router(connector) too.
If printer is connected to the router(connector) every 5-10 minutes wi-fi for all computers in the office become restricted (without internet access).
As soon as you are pulling out the ethernet cable from printer, everything works fine.
There are two computers that sharing printer by ethernet cable. Others are using wi-fi connection through both routers to connect to the printer. Wi-fi printing is working good by the way.
http://www.estateblock.com - Real Estate Startup helping homebuyers and homesellers all over Canada.
Real Estate Search Engine .

Search for wireless devices display

Some how I managed to get up the circular display screen with a rotating line which displayed all available devices. Now its gone, and I cannot get it up. I left click on the taskbar icon and 'search for wireless devices' but only get the small display. anyone help please?

Hi again
I think that it is not the reason why you can not start this application. You can configure the wireless connection on two simply ways. First one is to use windows settings (like in your case) or you can use some client to do this. In this way the windows option must be disabled.
As far as I know the ConfigFree tool is no a client. This tool can help you to get more precise information about your LAN or wireless connection. Like you can see there you can create some profiles and enable or disable all hardware components that your unit use for communication with other external devices.

TS3276 On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

On iMac with Mountain Lion I am now unable to send but can receive e-mails. Previously worked fine. I use an iCloud acct and Safari browser. Internet connection is wireless via cable modem. Any suggestion? Thanks.

Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Do you need an internet connection for airstream

i want to know if you need an internet connection for airstream on the (mini) Airport

No, an Internet connection is NOT required in order to use AirPlay with an AirPort Express Base Station (AX).

HT1657 in order to watch the dowloaded movied do I need internet connection for it?

in order to watch the dowloaded movied do I need internet connection for it?

If you are purchasing the movie, then once the movie has completed downloading, an Internet connection will not longer be needed. That should apply to rentals as well, but people report from time to time that even after the rental has downloaded iTunes still asks to connect to the iTunes Store.
Regards.

Share 'Wired' Internet Connection with other devices

I have a Macbook and an iPad. Currently my only internet connection (for the macbook) is via a patch cable to a jack in the wall. Is there a way to share this network with my iPad? If so, how? thank you!

hi,
try this:
1. click on system prefrences
2.click on network
3.click on wifi
4.turn on wifi
5.click on network name
6.click on create wifi
7.enter a name for your wi-fi
8.click on security and then none

No internet connection for non-admin users

Have upgraded to Yosemite and now the internet connection for users with parental controls have stopped working. Under Mavericks there was no problem with the settings.
If I log into an admin account on the same machine then the wifi works fine. Under the parental controlled account wifi is connected but any web based services can't connect and can't browse to any page.
Only option at this point would be to change accounts over to admin which would not be ideal.
Any ideas?

Next to the "check for updates" button it says iTunes will automatically check on a certain day (that day being tomorrow) but what if I want to check before that day to make sure everything is up to date
Then click on the Check for updates button.
Note that this is for the iPod updates only. This doesn't check for updates to iTunes.
iTunes pref -> General is where you set to check for iTunes updates.
Make sure your firewalls (Windows, Norton, router)allow iTunes access.

Central Site Internet Connectivity for MPLS VPN User

What are the solutions of Central site Internet connectivity for a MPLS VPN user, and what is the best practice?

Hello,
Since you mentioned that Internet Access should be through a central site, it is clear that all customer sites (except the central) will somehow have a default (static/dynamic) to reach the central site via the normal VPN path for unknown destinations. Any firewall that might be needed, would be placed at the central site (at least). So, the issue is how the central site accesses the Internet.
Various methods exist to provide Internet Access to an MPLS VPN. I am not sure if any one of them is considered the best. Each method has its pros and cons, and since you have to balance various factors, those factors might conflict at some point. It is hard to get simplicity, optimal routing, maximum degree of security (no matter how you define "security"), reduced memory demands and cover any other special requirements (such as possibility for overlapping between customer addresses) from a single solution. Probably the most secure VPN is the one which is not open to the Internet. If you open it to the Internet, some holes also open inevitably.
One method is to create a separate Internet_Access VPN and have other VPNs create an extranet with that Internet_Access VPN. This method is said to be very secure (at least in terms of backbone exposure). However, if full routing is a requirement, the increased memory demands of this solution might lead you to prefer to keep the internet routing table in the Global Routing Table (GRT). You might have full routing in the GRT of PEs and Ps or in PEs only (second is probably better).
Some names for solutions that exist are: static default routing, dynamic default routing, separate BGP session between PE and CE (via separate interface, subinterface or tunnel), extranet with internet VRF (mentioned earlier), extranet with internet VRF + VRF-aware NAT.
The choice will depend on the requirements of your environment. I cannot possibly describe all methods here and I do not know of a public document that does. If you need an analysis of MPLS VPN security, you may want to take a look at Michael Behringer's great book with M.Morrow "MPLS VPN Security". Another book that describes solutions is "MPLS and VPN Architectures" by Ivan Pepelnjak. There is a Networkers session on MPLS VPNs that lists solutions. There is also a relevant document in CCO:
http://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a00801445fb.shtml (covering static default routing option).
Kind Regards,
M.

Internet connectivity for wireless devices on homefusion

Similar Messages

Maybe you are looking for