Internet content connection status error message on BDP-S590 Bluray

I am trying to connect to Netflix using my BDP-S590 Sony Bluray and I am getting an "Internet content connection status" message that says "Connection status cannot be confirmed. A network error has occurred. Do you want to set the internet settings?". However, the settings are correct, and I can actually use the browser and surf the web, can someone help?

having exactly the same problem with a new bdp 7200 player. can get on web browser and surf but nothing when hitting the SEN button. very frustrated

Similar Messages

  • I cannot connect to internet im getting the error message: no network adapter installed or configure

    i cannot connect to internet im getting the error message: no network adapter installed or configured. what can i do?

    Sherya, welcome to the forum.
    When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    I believe that this is a problem for your ISP.  Their Customer Service should be able to help you.  There may be some settings that can be changed to solve the problem.  They would know what the settings should be.  I don't believe that it is a hardware problem.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Connection Timeout error message - HELP!

    Hi,
    I am so fed up with my internet connection....so here is my story....
    I live above a shop in a rented flat which is owned by the shop owner, he kindly gave me the password for his router so I could use his internet free of charge.
    This has worked fine with 3 different connections he has had since I have lived there and was working with the current one up until about a week ago.....it all of a sudden went off, however it was still showing up as an available network in my networks list, but when I try to connect to it using the password it brings up the 'connection timeout' error message.
    I thought that this was something to do with his router so I brought my friends 3 Huawei E585 wireless internet device round to try that, but the same message appears, HOWEVER my iPhone 4 connects to this perfectly fine with a full signal strength.
    THEN....my Dad took my Macbook and the 3 Huawei E585 device over to his house and my Macbook connected to it straight away??? ....... is there anything in the building that could affect the connection?? - as it seems to be my flat for some reason all of a sudden!? ..... my Dad has suggested it may be some sort of electrical interference if anything new has been installed recently?
    Any help would be GREATLY appreciated as I'm SOOOOOO fed up of not having internet!!
    Thanks

    John,
    I had the same problem when I upgraded from Tiger to Leopard in January. My memory is already rusty but try the following:
    1. Go to System Preferences > Network pane. On the left pane, click on AirPort. In the right pane lower right, click Advanced button. Then on the AirPort tab, click on the name of your network and then the minus sign to remove it from the list.
    2. Click Apply and quit System Preferences.
    3. Put the computer to sleep.
    4. Wake the computer.
    5. Go back in to Network preferences, AirPort tab. Click the plus sign to add your network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Add. NOTE: Do not connect to the network at this time.
    6. Click Apply and Quit the Network Preferences.
    7. On the Menu row, click the Airport icon and select your network. (IF your network does not show, choose Join Other Network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Join.)
    8. Verify connectivity
    9. Put the computer to sleep.
    10. Wake the computer.
    11. Verify connectivity
    HTH

  • We are receiving a "Secure Connection Failed" error message when using Firefox Version 37.01. What is the remedy?

    We have multiple websites that do not launch now as a result of the recent upgrade from Firefox version 36.04 to version 37.01. We received "Secure Connection Failed" error messages which indicate that the connection was interrupted while the page was loading, and that the page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please explain why this is happening, and if a fix will be issued soon by Mozilla, as everything was operating normally prior to the most recent Firefox upgrade. Alternatively, please identify browser settings that can/should be changed in order for Firefox to access these basic Internet sites (that are completely accessible using other browsers such as IE and Google Chrome). Thank you.

    ''rahuldecoded [[#answer-718441|said]]''
    <blockquote>
    https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
    </blockquote>
    FYI, I work with the original poster. I looked at the suggestions on that page but none were the issue. Then I found this thread:
    https://support.mozilla.org/en-US/questions/1056488
    And that appears to be the problem we and others are having.

  • Material statuses error message should go after entering Trackin No in PO

    Hi All,
    I have created one Material statuses with error message, I have created material with the use of that material statuses..
    Its working fine,At the creation of PR, PO I'm getting that Error message..
    My requirement is if I enter Requirement Tracking Number at item level of PR or PO means that Material statuses Error message should Go out and system has to allow to create PR or PO..
    Is it possible?? how to do it?? plz help me...
    Is it possible in standard SAp???
    thanks and regards
    rames reddy

    Hi,
    You can keep Requirement Tracking Number as Required Entry in field selection key (NBF or a copy of NBF as ZNBF) of PO document type in u201CReference data, itemu201D segment in following path:
    SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level
    And then assign field selection key to PO Document type and save.
    SPRO > Materials Management > Purchasing > Purchase Order > Define Document Types
    Now create PO with PO document type, system will ask you to enter Requirement Tracking Number in u201CItem Overviewu201D unless then you can save Purchase Order.
    The same you can do for PR document type by having a field selection key for PR document type.
    Regards,
    Biju K

  • Internet download - unknown publisher error message

    Hi
    I am having problems when I download from the internet, I get a windows error message saying unknown publisher, also my internet pages show error on page, some of the page is missing or it is full of rubbish. This has only been happening for the last few days, but it is appears on every download, I have tried to restore but it only goes back 5 days.
    Help, this is really frustrating.
    Thanks
    Chris

    thanks for your response but I cannot download Firefox, I have reduced my security settings, disabled the antivirus and I am still getting the same message
    I don't know what to do now other than through the thing out of the window, nearly every internet page has an error message now, or it just does not download properly, I have even tried saving the files to my desktop and running as the administrater but I am still getting the same message as before and then the programme just closes, I don't even get the option to download anyway.
    does anyone no what should be ticked or unticked on my security settings??????????????????????????????????????

  • When connecting to wifi, I get a "Connection timeout" error message.

    I'm trying to connect to a WEP password wifi signal. I have the password, but when connecting, I'm getting a connection timeout error message. Please help?

    I'm having the exact same problem. Yesterday it was fine, but today, I get connection timeout error message. Help?

  • Vimeo video unable to connect. Error message says "video format or mime type is not supported.

    Hi I am using a template with a full screen video landing page but i am unable to get Vimeo to video to connect. Error message says "video format or mime type is not supported".
    I have uploaded successfully to Vimeo however when published to catalyst and previewed the error message "video format or mime type is not supported." is displayed.
    Is this a format issue? I should point out I am using a template from Museworld as I am not a designer or graphic artist just another noob.@

    Hi,
    This seems to be a Firefox error:
    Firefox error: video format or MME type not supported - Articulate Storyline Discussions - E-Learning Heroes
    Kindly check if you are able to view the video on Vimeo.
    Also, try using another browser.
    Hope it helps,
    Sonam

  • Why do I always have "Insufficent Content for Edit" error message ?

    Hi all FCE experts,
    May I ask why do I always have "Insufficent Content for Edit" error message when I tried to overwrite or replace a clip ?
    Ok,this is what happen:
    I have a clip A (4 secs) followed by clip B (4 secs). Then in between I add a video transition.
    After a while, I reckon I want to change clip B with another clip (say clip C). So, I went to brower & search for clip C which is 2 mins long clip. To make sure there are enough handles, I went to the centre mark an In point then 4 sec later mark an Out point. So I drag this clips C of 4 secs from the Viewer (I marked the In & Out point in the viewer) to the Overlay canvas & do an Overwrite but it says "Insufficent Content for Edit".
    I then tried Replace also got the "Insufficent Content for Edit" error message.
    I then tried to delete the video transition and repeat the above for overwrite and replace, both times I got the same error.
    Any ideas ?
    Thanks

    Tom Wolsky wrote:
    From your description there is no way either of these things should happen. Without seeing it I would guess there is something else going in your timeline or your clip which you're not telling us. *Perhaps there are I/O pints marked in the timeline*. Or the destination tracks are not set correctly. or something else.
    Thanks Tom, you are correct.
    I have In Point & Out Point marked on the Timeline. I used it when I did FILE > EXPORT and left it there. But once I cleared it, I am able to replace it with another clip.
    But I am still puzzled as to why I cannot do any overwrite or replace when there is I/O points marked on the Timeline ? Especially when the section of clips I wanted to overwrite or replaced are located outside of the I/O points ?
    Thanks

  • Suppress "Connection Failed" Error Messages on Client?

    Hi there,
    I have a Leopard server which is Managing Preferences for users in groups. In my Login Preference for a group, I have it basically "auto mounting" shares, such as smb://leopard-server/accounting and smb://leopard-server/graphics.
    The works great so far. A user logs into their machine, managed prefs determines their group membership, and poof all the appropriate network drives show up on their desktop.
    Problem is - when a user is off the network (for instance, at home with their laptop), after they power up and login they are immediately assailed with error messages, one for each failed connection to a network drive: "Connection failed. The server may not exist or it is not operational at this time".
    Now it is understandable why Leopard is bringing up those error messages - it's trying it's best to connect to the network drive but the user isn't on the network.
    Question is: is there any way to suppress these error messages and let the users who are off-network boot to their desktop "quietly"?
    I know you can hold the Option key at login in order to turn off Managed Prefs altogether, but the problem with that is users tend to forget to turn Managed Prefs back on when they get back into the office.
    Any ideas?

    It's not just you, I am seeing this behaviour too.
    Where 10.4 clients would fail silently, 10.5 is throwing the "Connection Failed" error message as you described.
    I agree it is confusing to end users and would like a way to supress it, the only thing that springs to mind is manually mounting the share via a login hook that first checks network availability rather than using a WGM configured mount. Trouble is, to mount an afp share with the users credentials via a script is a whole new problem in itself.

  • Why do i keep getting the "internet connection timeout" error message?

    i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

    yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

  • IE works, Firefox has no connection- no error message- just continues to say "new tab" and "go to a website," when something is entered, it thinks for a moment, but then nothing happens. Chrome shows error 137 and safari cant find internet.

    Firefox and Chrome stopped working for apparently no reason. IE works. Have tried proxys, firewalls, and restarting. NOTHING WORKS. Firefox is the oddest as there are no error messages, but just shows practically no movement. Only movement is a quick "loading spin" in the address bar, but then nothing. The tab continues to read "new tab" and the address bar says whatever site I typed in, but goes no where. Chrome shows error 137 if that helps.

    It's not just you, I can't authorise my phone. It seemed to go down just after I started the update (it wasn't my fault though). I am using chrome, and it does not seem to be a firewall issue, or the bannerblock issue that I read about else where, since I dont have that program installed. Strange though how the support forum is still running. If I go to http://www.apple.com/support I get nothing, but googling topics allows me to see em.

  • I keep getting a connection failed error message from mail every time my computer goes to sleep, is shut down and/or I change network connections?

    Mail mail was working fine for months but now I keep getting an error message every time my computer shuts down or even goes to sleep.   I get the exclamation point error and when I try to reconnect it always falis.   My internet connection is fine and nothing else is losing connections.   The only way to fix it is to shut down mail completely and restart which fixes the connection every time, but it's getting really frustrating have to constantly shut down mail and restart it just to use my email.

    Bump ???

  • System Tray Status Error Message

    HP CP1025nw.  XP.  with USB connection.  Printer works fine, but gives error message on screen, "HP Systems Tray has encountered a problem and needs to close.  We are sorry for the inconvienience."    "Please tell Microsoft about this problem.  (send or Don't send)"
    I get 2 copies of this error message (one at a time) wnen the computer is booted up (even if the printer off and USB unplugged) and 2 copies in addition for each "print command" from all various application sources.  The printer works fine and prints are fine and there no functional issues.  If the driver is uninstalled, then  there are no error messages at boot-up.  Latest HP driver is installed, same problem as with driver on OEM disc. 
    (a screen copy of error message is avialable)
    Ronpro

    Hi Ronpro,
    Welcome to the HP Forums.
    I see that you are getting a message "HP Systems Tray has encountered a problem and needs to close.  We are sorry for the inconvienience."  "Please tell Microsoft about this problem".
    I will be happy to help you.
    I believe the error is for the HP Device Settings options for the printer maintenance located on the Windows system tray.
    I would run a full uninstall and reinstall. Turn off any startup programs interfering and temporarily turn off the Antivirus Software to get the full software installed properly.
    Disconnect the USB cable first.
    Uninstalling the Printer Software.
    I would disable all the start up programs to make sure something in the background isn't causing any issues.
    Go to start, run, type in msconfig, click the Services tab.
    Click to select the Hide All Microsoft Services check box.
    Click Disable All, and then click OK.
    Click on the start up tab across the top, select disable all, apply, OK and restart the computer.
    Temporarily turn off the Antivirus software.
    Then reinstall the printer software again.
    Full Feature Software and Driver.
    Test the printer.
    Check to see if the Device Settings feature will now open.
    Cleaning the Paper Path and Exterior.
    Restart the computer to see if the error comes up again.
    Then go back in and enable the startup programs and Microsoft services and turn the Anitivirus software back on.
    If the issue comes back after turning on the startup programs, I would leave everything unchecked except the Antivirus Software.
    Please let me know if you need further assistance.
    Thank you for posting on the HP Forums.
    Have a great day.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Problems after downloading the lastest version of iTunes for my iPod Touch. Now whenever I switch on my laptop and access the internet I get an error message. 2nd time this has happened and I'm fed up trying to fix it. Anybody having similar problems?

    I've downloaded iTunes 10.5 onto my iPod Touch, no problems but I've now got a constant error message on my laptop everytime I switch it on and access the internet. The message is "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll"
    This is the 2nd time this has happened. Last time iTunes Support called and we ran through a load of checks to no avail. The only option was to delete iTunes completely off my laptop and go for a new download of it. Can anybody tell me how to do it - didn't write it down last time, silly me, never thought it would happen again. Also sent an email to iTunes Support - waiting for a response.

    Maybe:
    "Waiting for changes to be applied": Apple Support Communities
    Also I requested that your email address be deleted. Personal responses are not given in this forum

Maybe you are looking for