Internet crashed during update while iPhone was connected to iTunes
And now my phone will not start unless I do a system restore, and not everything I had was backed up as I only had 5 gigs of storage. What are my options??
Possible the iPhone had something to do with it, but I like to make sure the Disk Directory & Permissions are good before any update.
Was that Repair/Verify done when booted from the Install Disc?
You must repair the HD, if Disk Utility or fsck should fail to repair it then...
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
Similar Messages
-
My G5's hard drive died after doing a software update while iPhone was connected.
My G5's hard drive was corrupted and unbootable after doing a software update while my iPhone 4 was connected. Coincidence or related?
Attempts at rebooting produced the file folder icon with flashing question mark. It's been a LONG time since I last saw that.
Disk Utility/First Aid reported that drive had "invalid node structure." The disk could not be repaired because it "could not be unmounted."
Is the failure possibly related to the iPhone being connected at the time of the software update and restart?Possible the iPhone had something to do with it, but I like to make sure the Disk Directory & Permissions are good before any update.
Was that Repair/Verify done when booted from the Install Disc?
You must repair the HD, if Disk Utility or fsck should fail to repair it then...
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83 -
my iphone was connected to itunes on my computer and it has been wiped of all my photos addresses video etc and is now presenting like an ipod - can anyone help?
Hello,
First I would advise you to try restart or reset it : http://support.apple.com/kb/ht1430
If that does not work, try a force restore : http://support.apple.com/kb/ht1808 -
During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
Please how do i reactivate iPhone?Hello DadiPrince,
The following article contains information beneficial to getting your iPhone back into normal working order.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
All the best,
Allen -
my computer was restarted and now i want to connect and update my iphone with a new itunes. how do i do this without losing all my stuff on my iphone?
i didnt get a chance to back my phone up before the comp crashed
will i lose any of my stuff?When you open iTunes and plug in iPhone (iPod) to computer, it appear in the left bar. Then just simply right click on you iPhone (iPod) and choose Transfer Purchases, this should copy your purchased items to your computer.
Hope this help -
I m using iPhone 3gs (ios5.1.1) but today I update it to ios 6.1.3 after the update it got suckon " connect to itunes " symble. And when I was trying to connect it to iTunes it showed restore and update? When I selected that it start downloading ios 6.1.3 on iTunes . I m unable to use my iPhone what to do pls tell me?
Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743 -
my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
worth looking at for the future to understand backing up etc -
When updating iPhone had to restore then activate, it would not let me tough i was connected to iTunes (update was complete just had to activate)
Shameel121 wrote:
... (update was complete just had to activate)
See this discussion.
https://discussions.apple.com/message/21189708 -
IPhone shows connect to iTunes and when i connects, iTune crashes :(
I have downloaded the iOS8 and while it was upgrading the phone, the iTunes crashed and the iPhone is showing the ' connect to iTunes' symbol. But as soon as i plugged the device on my mac the iTunes crashes. Relaunching the iTunes again ended up in crashing the same . i can launch iTunes with out the iPhone connected, but again, when i connect the phone it crashes. and the phone keep showing " connect to iTunes icon".. Bad problem
Restart the Mac, restart iTunes, then connect the iPhone using the recovery mode instructions given in http://support.apple.com/kb/HT1808
-
I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!
Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
Read:
http://www.apple.com/support/iphone/assistant/restore/ -
i just updated my ipad to ios 8 but i cant connect to wifi network..its says my password is incorrect although i know my password is correct as successfully updated 2 iphones and connected to same wifi network
I had the same problem. I reset my network settings as iOS 8 on my iPad 3 seemed a bit slow. When I tried to reconnect to the wifi the correct password was not accepted immediately.
after retrying several times it did manage to join the network. The only observation I had was that I had a weak signal and an iPhone next to me at the time.
make sure you are close to the wifi signal away from any other wifi devices. -
I unplugged my iphone while it was syncing with itunes and now it will not sync new music that I have added to itunes?
iPhone User Guide
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I have tried to update my Iphone 4S today to IOS 7.0.6 and now my iphone wont connect to itunes as it says that it is detected that it is in recovery mode and needs restoring. How do I restore it? I cannot get my phone on at all?
Click restore in itunes.
-
My iPhone was connected to my computer and to itunes. I deleted apps from my iPhone directly, when it was connected. Now I am unable to sync my iPhone.
When I try and sync, it goes through the process then a message appears:
" iTunes cannot sync apps to the iPhone because the apps installed on the iPhone could not be determined."
On the 'apps' tab in iTunes, a list of 13 apps appears, when I now only have 6 on my phone.
This is stopping the iPhone syncing fully, and I want to upload all my music to the phone.
Does anybody have any idea what I could do? I am reluctant to add all the apps again as soem I have to pay for, and one, Post Secret is no longer available.
Thankyou!I think we may have an answer here as these 2 threads seem related to our problems. Unfortunately it's not an answer that's welcome.
Can't download free or purchased apps...: Apple Support Communities
App download buttons not working.: Apple Support Communities
Looks like Apple may have finally abandoned the 2g ;-(
-DJC -
When iOS 6.0 updating my iPhone and connecting my iPhone to iTunes the only option I have, is to restore my iPhone. But ufortunately, I did not back up my iPhone before the updating. Is there any way I can avoid the restoring process?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766
Maybe you are looking for
-
Hey All Please help me with my ipod. Ive been trying for so long to get it working( More than 4 Months) but with no luck. The problems started when my friend asked me to plug his ipod into my computer to get my songs because his ipod wouldnt load son
-
I'm a Captivate user and I wanted to get a better understanding of the Analytics Dashboard so I've downloaded the Presenter 9 trial. I've enabled analytics as well as reporting for a SCORM 2004 environment, published a file with multiple questions, a
-
Iphone 5 screen not auto turning off
I was wondering if anyone else has noticed a difference in how the new iPhone turns off. With my iPhone 4, I'd drop it in the trouser pocket and it would shut off within the 5 minutes, as set with auto lock. But for some reason the new phone stays
-
Adding network switch to external WAN to increase number of ports available
This may be a stupid question but this has kinda been landed on me so I'll ask anyway. We have a Cisco router with ethernet connection to our provider's NTE. They provide us with one ethernet port on the NTE which we connect to the WAN port on our C
-
Set Default Standard Element Font in Designer
Are there any configuration settings or .ini files I can edit in the Designer installation folder that will change the font selected for a standard elements when I place a new standard element from the library onto my form? I realize I could just cre