Internet data configuration for unlocked BB Curve 8310

After much research I was directed to this site for help.
I have an issue with BB 8310 Curve internet data configuration.
I bought an unlocked BB Curve and I am unable to access internet.
I have an internet plan with my carrier; Consumer Cellular. I have the settings that I received from them (they do not carry BB) that I can input manually; but have no clue how to do this. I tried to register, but was unsuccessful.
Any help would be greatly appreciated!!
Solved!
Go to Solution.

Blackberry's require a specific Blackberry Data Plan in order to function properly where the information is pushed from your service provider to the phone in the form of "Service Books".
Without those service books you will be unable to use the majority of features on your phone - and as you have said your carrier does not support Blackberrys then I would imagine they do not offer a Blackberry Data Plan.
Some more details on what you can and cannot do with a generic data plan can be found here.
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F

Similar Messages

Help. BB Curve 8310 internet data configuration.

Hi.. i hope someone can help me.
My cousin gave me her BB Curve 8310, and her provider is At&t and my provider is H2o (prepaid international wireless company) the phone works great, i can receive and make calls, text message easly, but the data is not working MMS and internet. I have a data plan that i cant use on the phone because i dont know how to do the configuration. I called the company H2O and they said that the phone works great because at&t phones are compatible with h20, but the data doesnt work, so they told me to do the configuration manually. but im not an expert and i couldnt find anything on the list that they gave me.
this is what they gave me.
Phone Settings
Description
Value
Proxy Gateway IP Address
proxy.mvno.H2OMobileweb.com
Proxy Gateway Port
80
WAP APN
att.mvno
WAP Homepage URL
http://www.H2OMWeb.com
MMS APN
att.mvno
MMS URL
http://mmsc.cingular.com
I hope someone can help me.
Adri
Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

Hello darkqueen and charliehope and welcome to the BlackBerry Support Community Forums.
Can you both send me a private message with your BlackBerry PIN (found under Options>Status) so I can investigate further for you.
darkqueen, since you bought an unlocked device you are most likely seeing the originating carrier's information as each software bundle is specific to a carrier's request. I will investigate further when I get the requested information.
Thanks
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

No message services configured on unlocked vodafone curve now with Tigo sim card

Recently unlocked my curve 8520 from vodafone Ireland. I am based in Central America now and it now has a Tigo El Salvador chip. I can receive emails, texts and BBM. Can also send texts & BBM but cannot send emails. The phone previously worked with my office BES but they have since migrated from blackberry. The message after i attempt to send an email is "no message services configured. You will only be able to save draft".
Any help would be appreciated.
Thanks.

Several things to check...
Options > Advanced > Default Services.
Under Messages > do you have your default email listed? If not, choose it if you can.
If it is not present...
Please try this, using your BlackBerry browser...
1)
• Go to mobile.blackberry.com OR to www.blackberry.com/integrate
• Scroll down to Communication and then to Email.
• Choose the appropriate email set up options, and either edit the current account in question and save. Or you can delete that account and then return and set it up again.
If that works and completes your email setup/editing, good.
If not, follow these additional instructions:
2) Register HRT: (OS5) Home Screen > Options > Advanced Options > Host Routing Table > Scroll to any line entry and > press the Menu key > and then click Register Now. If you have an OS 6 or OS 7 device, Look at Options > Device > Advanced > Host Routing Table, etc.
3) Resend Service Books: Article ID: KB02830 How to send the service books for a BlackBerry Internet Service account. http://www.blackberry.com/btsc/KB02830
4) Then, with the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
5) Now, return to the 1) mobile.blackberry.com email setup as mentioned above and follow that.
Hopefully that will get things going again for you!
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BB Desktop Software 4.5/Handheld OS 4.5 for AT&T Curve 8310

Does anyone have a BB Curve 8310 with AT&T and has been successfully able to upgrade to the desktop 4.5 and the O.S. 4.5 for the handheld? Is it possible?

If you downlaoded the V4.5 from another company's website, you will need to delete the vendor.xml file before you can install it. Keep in mind, that that version, if its not released from your carrier may cause issues with your clackberry, including from what I have read make your Blackberry a paperweight and/or fry your sim card. IE, it may void the warranty on your Blackberry since its not tested on your carriers service.
If your carrier does have it available, most carriers will have instructions on how to downlaod and update your Blackberry on their website.
New to a Blackberry? Check out http://www.discoverblackberry.com

Bluetooth / Vista drivers for use with Curve 8310

Can anyone please assist with information on where and how I can get working Bluetooth drivers for Vista for use with my Curve 8310?
Thanks in advance
Cheers
Phil

have you found them yet? thanks

The date changed for unlocking my iPhone from July to October

For some change reason the date changed on which I was able to unlock my phone. I was July but suddenly it changed to Oct 2012. I have a German provider (T-Mobile) but they are not able to help me. Does anyone know waht happend. I found more people with the same question in other forums but no answers.

Don't know what to tell you. Yours is the first post of its kind regarding a "delay" in authorizing an official unlock I've seen, and quite frankly I can't imagine any reason for such on Apple's end. All that Apple does is add your phone's IMEI number to a data base of officially unlocked iPhones. Something seems fishy to me regarding what your carrier told you. At any rate, there is no one from Apple here, thus nothing anyone here can do to help you. You could always call AppleCare & verify the veracity of what you were told, and if not true confront your carrier.
Good luck.

BB Curve 8310 4.5 different?

I have just learned about the new OS 4.5 for the BB curve 8310. What is the difference from it and the 4.2, which I have. and is it worth the 90 MB it will take to download it?

ATT has not authorized or released the upgrade. However, many many ATT and other users are upgrading anyway. You can find it here:
http://www.blackberryforums.com/general-8300-series-discussion-curve/153055-latest-os-8310-4-5-0-108...
After any OS upgrade or OS reload you have to reactivate on the BES. Just call your BES admins and get a password to reactivate. They do it all the time and it's no big deal.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.

Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Video for BB Curve 8310

I need some help! I work for an AT&T retail store. I have a customer that has the Curve 8310. She is unable to view videos on You Tube or CNN type pages. She can receive a video via MMS but as far as viewing them on a webpage, cant do it. I also tried it with my Curve 8310 and could log onto You Tube and pull up a video but could not watch it. Is this something to do with the fact that AT&T does not support this level of access? Does anyone have AT&T that could help me out?? Thanks so much!

To watch streaming video from such as YouTube.com, you will need to have OS 4.5 loaded on your BlackBerry. That will enable live video ability.
and then, you will use the mobile site, "m.youtube.com"
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Using unlocked bb curve 9310 w/Tmobile without data

Greetings, I am looking to buy a bb curve 9310. At the moment, I am in a 2 year contract with Tmobile-unlimited call & text, no data plan. I need to change my phone and I would like a blackberry because I text a lot, and also I would use its WiFi capabilities as well. I've been doing some research, and it appears to be not so simple as to just buying the phone and putting a SIM card. I would just like to know if I'd be able to use an unlocked bb curve 9310 with my Tmobile SIM (2 year plan, no data) I already know that I wont be able to use features such as BBM. I'm waiting till my contract expires and maybe then add a data plan or switch carriers. Any response would be greatly appreciated since I need to change my phone ASAP. Thank you!
Solved!
Go to Solution.

That does happen with carriers like At&t and Verizon. However, T-mobile US doesn't do that. I have an iPhone and a BB 9780 for two of my kids on family plans for $5 each per month--no data plans.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Can SSD which is configured for intel rapid start be used to store data files as a normal drive

Can SSD which is configured for intel rapid start(No Smart Response) be used to store data files as a normal drive
Lenovo ideapad u310 with 24 GB SSD Partition , only 4GB has been configured as Hibernate partition for Intel rapid start, rest of the 18.36 GB has been labelled as Healthy(Primary partition).Can this 18.36 GB of SSD be configured to store data files on it without affecting Intel rapid start.

I think I have discovered the answer to my own question!
I have disabled Adobe Reader plug-in, and can now see PDFs in Chrome.
(Steps: Chrome Menu, Settings option, Click Advanced Settings link, then Content Settings button, then select Disable Individual Plug-Ins, and a list of plug-ins is offered to enable or disable).
I then get a different result depending on whether or not Chrome PDF viewer is enabled - with it enabled I see the PDF document in Chrome, or with it disabled then the option is offered to download it, but either way I can get it it via Chrome without having to run Internet explorer in another browser window.

Re: Low data cap for highest tier internet makes no sense

AWESOME NEWS EVERYONE! Comcast has decided to Give me an unlimited service. YAY! I can know Call China, Hong Kong, India, Mexico, Singapore, South Korea via my comcast landline. Plus any calls to these countries no longer count against my carefree minutes. Brilliant!. Awesome work William F. Sweeney. Why do land lines even still exsist? Havnt used a land line in Years! Even though I have no reason to call out side of the united States and my data cap is still there and I still pay 250.00+ monthly bill and my service is still horrible and I still get disconnected and I still dont always get the speeds Im promised. But what a way to try and make me feel like I get somethign valuable. Wait. I never used my land line. Its just there for the heart monitor device in case someone has a heart attack. Although if that was to happen. Comcast service soo horrible the Hostibital may never get that call. Unless maybe its calling Hong Kong. Maybe there doctors will help. Oh. and awesome news on Comcast EVEN faster service, another way to trick you into signing your soul away. Well. Its time to go pay my 250.00 bill or comcast will disconnect me with EVEN more fees.

Only Telstra is able to block Internet the way you decribe.
Anyway, let us check everthing is configured correctly in your Nokia Asha 300, a Nokia Series 40 phone:
Menu » Settings » Configuration » Default » Options » Delete
Do that for all configuration you see there.
When all are deleted, hit the red key.
Menu » Settings » Configuration » Personal » Add or Options » Add new » Multimedia messages »
Server address: mmsc.telstra.com:8002
Use preferred access point: No
Access point settings » Proxy » Enabled
Proxy Address: 10.1.1.180
Proxy Port: 80
Bearer settings » Packet data access point: telstra.mms
When you are done, hit the red key.
Menu » Settings » Configuration » Default » Personal configuration » Select
Now, try to send an MMS. Do you get a frame around the G? Yes, than Internet is enabled for your account. A frame says: The APN context to telstra.mms was activated successfully. If not, ask Telstra if GPMMSB3 is enabled for you. The next step is to use the correct APN of your pack. Because I am not a Teltra user, I cannt help any further. I would go for an Australian crowd based support channel, like the official one …

Problem in Internet Connection BB Curve 8310

I got problem with my old spartphone Curve 8310. It cant connect to internet. It was started after I went back to UK and use Airtel Vodafone SIM card.
I went to the network provider (TELKOMSEL INDONESIA) and they said that my BB was suspended.
How can I activare my internet service again?
IMEI: 395315.01.734737.4
Need help.

Hello Kholis
Welcome to http://supportforums.blackberry.com
You must activate a data service plan or BIS
That suits your needs.
This activation of the plan can ask your carrier to which these associated.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Service Manager Data Warehouse Install - Analysis Server Configuration For OLAP Cubes Fail

Hello everyone,
I have an issue with my installation of the Data Warehouse for System Center Service Manager 2012 SP1.
My install environment is the following:
Windows Server 2012 – System Center Service Manager (Successfully Installed) - Virtual
Windows Server 2012 – System Center Data Warehouse (Pending) - Virtual
Windows Server 2012 – MS SQL Server 2012 – Physical, Clustered 1st of Four Servers
The SQL Server is a clustered installation with named instances, specifically for SharePoint and Service Manager. Each instance has its own IP address and dynamic ports are turned off. I’m installing using the domain administrator account and I also chose
to run the installer as administrator. The domain admin has sysadmin rights to the service manager server and instance I’m trying to install on. However, the account does not have sysadmin rights to some of the other instances.
The install is smooth up until it needs to connect to the Analysis server database. I have tried connecting to the analysis servers on other SQL servers on site and all were successful. The only difference between the older SQL servers, the SQL 2012 development
server and the SQL 2012 Production server I’m trying to install to is that the that the domain admin account doesn’t have sysadmin access on all the databases on the new production server. The SQL server is being installed and configured by a contractor so
if you all have troubleshooting suggestions, I’ll need to coordinate with the contractor.
Starting with the screen below, I began searching for help online. There seems to be no one else with this issue or it is not documented properly. I opened a ticket with MS, called the contractor and troubleshot with him, troubleshot as far as I could on
my own and I’m still at a loss as to what is preventing the installer from connecting specifically to the analysis server.
I first thought the installer was at issue or that the data warehouse sever was at issue. But all signs are pointing at the SQL server. The installer is able to connect to all the other SQL servers – including other 2012 servers (same versions) – so it can’t
be the installer. I’m pretty sure the SQL server is going to be at issue.
After looking at this error, I opened the resource monitor and clicked the dropdown to see if it was trying to connect to the correct server and it was. I then connected to the old and new test and development servers successfully. Then connected to the
SQL 2008 R2 production cluster successfully. I then compared the two servers. The only difference other than the version numbers is that the admin account doesn’t have sysadmin rights on all the SQL 2012 database servers. But the database servers are not the
problem. The analysis servers are.
I then checked the event logs and they are empty as far as this issue is concerned. Actually, there are no errors on the SQL 2012 production box and the Data Warehouse box. I then checked the log that the installer creates during every step of the installation
and this is what is created when the dropdown is clicked for the analysis server configuration screen. The log file location is:
“C:\Users\admin\AppData\Local\Temp\2\SCSMSetupWizard01.txt”
In the file is the following text.
01:03:34:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012
01:03:34:Using SQL Server 2012 management scope on SCSMSQL2012
01:03:36:Collecting SQL instances on server SCSMSQL2012
01:03:36:Attempting connection to SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:36:Using SQL Server 2012 management scope on SCSMSQL2012.johnsonbrothers.com
01:03:38:Found SQL Instance: SCSMSQL2012\PWGSQL2012
01:03:38:Found SQL Instance: SCSMSQL2012\SCSMSQL2012
01:03:39:Error:GetSqlInstanceList(), Exception Type: Microsoft.AnalysisServices.ConnectionException, Exception Message: A connection cannot be made. Ensure that the server is running.
01:03:39:StackTrace: at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
 at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
 at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
 at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
 at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
 at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetASVersion(StringBuilder sqlInstanceServiceName)
 at Microsoft.SystemCenter.Essentials.SetupFramework.HelperClasses.SetupValidationHelpers.GetSqlInstanceList(String sqlServerName, Int32 serviceType)
I’m now investigating the issue according to this output, and decided to ask you all if you’ve run into this issue and found a resolution.

I am running into same issue . But I don't anything in the instances section related to portipv6 . I do see in the listener section , I tried to remove it . But it comes up again . Please help
<ConfigurationSettings>
<Security>
<RequireClientAuthentication>0</RequireClientAuthentication>
<SecurityPackageList/>
</Security>
<Network>
<Listener>
<RequestSizeThreshold>4095</RequestSizeThreshold>
<MaxAllowedRequestSize>0</MaxAllowedRequestSize>
<ServerSendTimeout>60000</ServerSendTimeout>
<ServerReceiveTimeout>60000</ServerReceiveTimeout>
<IPV4Support>2</IPV4Support>
<IPV6Support>2</IPV6Support>
</Listener>
<TCP>
<MaxPendingSendCount>12</MaxPendingSendCount>
<MaxPendingReceiveCount>4</MaxPendingReceiveCount>
<MinPendingReceiveCount>2</MinPendingReceiveCount>
<MaxCompletedReceiveCount>9</MaxCompletedReceiveCount>
<ScatterReceiveMultiplier>5</ScatterReceiveMultiplier>
<MaxPendingAcceptExCount>10</MaxPendingAcceptExCount>
<MinPendingAcceptExCount>2</MinPendingAcceptExCount>
<InitialConnectTimeout>10</InitialConnectTimeout>
<SocketOptions>
<SendBufferSize>0</SendBufferSize>
<ReceiveBufferSize>0</ReceiveBufferSize>
<DisableNonblockingMode>1</DisableNonblockingMode>
<EnableNagleAlgorithm>0</EnableNagleAlgorithm>
<EnableLingerOnClose>0</EnableLingerOnClose>
<LingerTimeout>0</LingerTimeout>
</SocketOptions>
</TCP>
<Requests>
<EnableBinaryXML>0</EnableBinaryXML>
<EnableCompression>0</EnableCompression>
</Requests>
<Responses>
<EnableBinaryXML>1</EnableBinaryXML>
<EnableCompression>1</EnableCompression>
<CompressionLevel>9</CompressionLevel>
</Responses>
<ListenOnlyOnLocalConnections>0</ListenOnlyOnLocalConnections>
</Network>
<Log>
<File>msmdredir.log</File>
<FileBufferSize>0</FileBufferSize>
<MessageLogs>Console;System</MessageLogs>
<Exception>
<CreateAndSendCrashReports>0</CreateAndSendCrashReports>
<CrashReportsFolder/>
<SQLDumperFlagsOn>0x0</SQLDumperFlagsOn>
<SQLDumperFlagsOff>0x0</SQLDumperFlagsOff>
<MiniDumpFlagsOn>0x0</MiniDumpFlagsOn>
<MiniDumpFlagsOff>0x0</MiniDumpFlagsOff>
<MinidumpErrorList>0xC1000000, 0xC1000001, 0xC100000C, 0xC1000016, 0xC1360054, 0xC1360055</MinidumpErrorList>
<ExceptionHandlingMode>0</ExceptionHandlingMode>
<MaxExceptions>500</MaxExceptions>
<MaxDuplicateDumps>1</MaxDuplicateDumps>
</Exception>
</Log>
<Memory>
<HandleIA64AlignmentFaults>0</HandleIA64AlignmentFaults>
<PreAllocate>0</PreAllocate>
<VertiPaqPagingPolicy>0</VertiPaqPagingPolicy>
<PagePoolRestrictNumaNode>0</PagePoolRestrictNumaNode>
</Memory>
<Instances/>
<VertiPaq>
<DefaultSegmentRowCount>0</DefaultSegmentRowCount>
<ProcessingTimeboxSecPerMRow>-1</ProcessingTimeboxSecPerMRow>
<SEQueryRegistry>
<Size>0</Size>
<MinKCycles>0</MinKCycles>
<MinCyclesPerRow>0</MinCyclesPerRow>
<MaxArbShpSize>0</MaxArbShpSize>
</SEQueryRegistry>
</VertiPaq>
</ConfigurationSettings>

Internet data configuration for unlocked BB Curve 8310

Similar Messages

Maybe you are looking for