Internet down in my solaris 10 installed laptop

Hi All ,
I have setup a dual boot in my laptop , win XP and Solaris 10 (10/08) .
When I boot machine in Solaris 10 ,
I got this error with sendmail
My unqualified hostname unkown , Sleeping for retry .
When I loged in , inernet is not working .
/etc/hostname has only
127.0.0.1 localhost
Any sugesstion are welcome .
Thankyou.

What account are logged as? You can type "who" command without the quotation. You should be logged in a root. Root has total control of the system. If you want to go to the root account type "su" command.

Similar Messages

Solaris 10 instalation in Guest Domain - Timed out waiting for TFTP reply

I have the next trouble
I have a Sun Fire T1000 and i want install two Guest LDOM's with Solaris10 in each one, I Install the LDOM Manager 1.0.3 and the service is "online" also the another services needed
First Setup the 2 Guest LDOM's in the primary Domain sucesfully .... here is a desc of the configuration.
# ldm list-bindings
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 4 1G 0.1% 2h 14m
MAC
00:14:4f:a7:85:1e
VCPU
VID PID UTIL STRAND
0 0 0.2% 100%
1 1 0.2% 100%
2 2 0.1% 100%
3 3 0.1% 100%
MAU
ID CPUSET
0 (0, 1, 2, 3)
MEMORY
RA PA SIZE
0x8000000 0x8000000 1G
VARIABLES
diag-switch?=true
security-#badlogins=0
IO
DEVICE PSEUDONYM OPTIONS
pci@780 bus_a
pci@7c0 bus_b
VCC
NAME PORT-RANGE
primary-vcc0 5000-5100
CLIENT PORT
aplica_srss1@primary-vcc0 5001
aplica_prod@primary-vcc0 5000
VSW
NAME MAC NET-DEV DEVICE MODE
primary-vsw0 00:14:4f:a7:85:1e bge0 switch@0
PEER MAC
vnet2@aplica_srss1 00:14:4f:fb:f4:e0
vnet1@aplica_prod 00:14:4f:fb:2c:60
VDS
NAME VOLUME OPTIONS DEVICE
primary-vds0 vol1 /dev/dsk/c0t0d0s3
CLIENT VOLUME
vdisk1@aplica_prod vol1
VCONS
NAME SERVICE PORT
SP
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
aplica_prod active -t--- 5000 4 2G 15% 9m
MAC
00:14:4f:fb:2c:60
VCPU
VID PID UTIL STRAND
0 4 35% 100%
1 5 0.0% 100%
2 6 7.0% 100%
3 7 84% 100%
MEMORY
RA PA SIZE
0x8000000 0x48000000 2G
VARIABLES
auto-boot?=true
boot-device=
use-nvramrc?=true
NETWORK
NAME SERVICE DEVICE MAC
vnet1 primary-vsw0@primary network@0 00:14:4f:fb:2c:60
PEER MAC
primary-vsw0@primary 00:14:4f:a7:85:1e
vnet2@aplica_srss1 00:14:4f:fb:f4:e0
DISK
NAME VOLUME TOUT DEVICE SERVER
vdisk1 vol1@primary-vds0 disk@0 primary
VCONS
NAME SERVICE PORT
aplica_prod primary-vcc0@primary 5000
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
aplica_srss1 bound ----- 5001 24 13184M
MAC
00:14:4f:fb:ad:fb
VCPU
VID PID UTIL STRAND
0 8 100%
1 9 100%
2 10 100%
3 11 100%
4 12 100%
5 13 100%
6 14 100%
7 15 100%
8 16 100%
9 17 100%
10 18 100%
11 19 100%
12 20 100%
13 21 100%
14 22 100%
15 23 100%
16 24 100%
17 25 100%
18 26 100%
19 27 100%
20 28 100%
21 29 100%
22 30 100%
23 31 100%
MEMORY
RA PA SIZE
0x8000000 0xc8000000 13184M
VARIABLES
auto-boot?=true
boot-device=
NETWORK
NAME SERVICE DEVICE MAC
vnet2 primary-vsw0@primary network@0 00:14:4f:fb:f4:e0
PEER MAC
primary-vsw0@primary 00:14:4f:a7:85:1e
vnet1@aplica_prod 00:14:4f:fb:2c:60
VCONS
NAME SERVICE PORT
aplica_srss1 primary-vcc0@primary 5001
Then i mount the ISO images of The solaris OS 5/08, Later install the jumpstart server without troubles.... Here are the Configuration files needed for the properly setup of the service for a better guide

# ./add_install_client -d -e 0:14:4f:fb:2c:60 -s Zolder:/var/jump_start/ sun4v
cleaning up preexisting install client "0:14:4f:fb:2c:60"
To disable 0:14:4f:fb:2c:60 in the DHCP server,
remove the entry with Client ID 0100144FFB2C60
To enable 0100144FFB2C60 in the DHCP server, ensure that
the following Sun vendor-specific options are defined
(SinstNM, SinstIP4, SinstPTH, SrootNM, SrootIP4,
SrootPTH, and optionally SbootURI, SjumpCF and SsysidCF),
and add a macro to the server named 0100144FFB2C60,
containing the following option values:
Install server (SinstNM) : Zolder
Install server IP (SinstIP4) : 172.24.0.10
Install server path (SinstPTH) : /var/jump_start/
Root server name (SrootNM) : Zolder
Root server IP (SrootIP4) : 172.24.0.10
Root server path (SrootPTH) : /mnt/s0/Solaris_10/Tools/Boot
Boot file (BootFile) : 0100144FFB2C60
# cat /etc/inet/hosts // The Content of this file is exactly with ipnodes file
127.0.0.1 localhost
172.24.0.10 Zolder loghost
172.24.0.9 primary-vsw0
172.24.0.8 aplica_prod
172.24.0.7 aplica_srss1
# cat /etc/ethers
00:14:4f:fb:2c:60 aplica_prod
# cat /etc/bootparams
aplica_prod root=Zolder:/mnt/s0/Solaris_10/Tools/Boot install=Zolder:/var/jump_start/ boottype=:in rootopts=:rsize=8192
# cat /etc/dfs/dfstab
share -F nfs -o ro,anon=0 /var/jump_start/
share -F nfs -o ro,anon=0 /mnt/s0/Solaris_10/Tools/Boot
share -F nfs -o ro,anon=0 /mnt/s1
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
vsw0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.24.0.10 netmask fffffe00 broadcast 172.24.1.255
ether 0:14:4f:a7:85:1e
vsw0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.24.0.9 netmask fffffe00 broadcast 172.24.1.255
Here i plumb up the networks interfaces and setup the vsw0 device and change the MAC address of the vsw0 for the same of the bge0 device.
Then i Log to a Guest LDOM aplica_prod
----------START CONSOLE 1-------------------------------
# telnet localhost 5000
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connecting to console "aplica_prod" in group "aplica_prod" ....
Press ~? for control options ..
----END CONSOLE 1----
At the same time i open another console for startup the Guest LDOM aplica_prod i make a snoop of the vsw0 interface
---START CONSOLE 2---
# ldm start aplica_prod
LDom aplica_prod started
-bash-3.00# snoop -d vsw0 | grep aplica_prod
Using device /dev/vsw0 (promiscuous mode)
---END CONSOLE 2-----
In the other console is produced the next exit
----START CONSOLE 1------
Sun Fire(TM) T1000, No Keyboard
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.28.9, 2048 MB memory available, Serial #66792544.
Ethernet address 0:14:4f:fb:2c:60, Host ID: 83fb2c60.
Boot device: File and args:
ERROR: boot-read fail
Evaluating:
Can't locate boot device
{0} ok boot vnet1 install
Boot device: /virtual-devices@100/channel-devices@200/network@0 File and args: install
Requesting Internet Address for 0:14:4f:fa:82:17
Requesting Internet Address for 0:14:4f:fa:82:17
Timed out waiting for TFTP reply
---END CONSOLE 1-----
in the console 2 the snoop generates an exit of the net traffic for the vsw0 device
----START CONSOLE 2--------
primary-vsw0 -> aplica_prod RARP R 0:14:4f:fb:2c:60 is 172.24.0.8, aplica_prod
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
primary-vsw0 -> aplica_prod RARP R 0:14:4f:fb:2c:60 is 172.24.0.8, aplica_prod
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
Zolder -> aplica_prod TFTP Error: access violation
aplica_prod -> BROADCAST TFTP Read "AC180008" (octet)
----END CONSOLE 2----
Once start the snoop to produce messages make a ping to the IP's that should be assigned in the host file and all give a succesful answer BUT without start the Solaris 10 Instalation
# ping 172.24.0.8
172.24.0.8 is alive
# ping 172.24.0.9
172.24.0.9 is alive
# ping 172.24.0.10
172.24.0.10 is alive
I really need help with this trouble ..and any help or advice will be thrully appreciated
Thanks
PD: any other required configuration file will be provided if is needed

Moving disks while maintaining Solaris 10 install from one v240 to another.

Hi,
I want to move a Solaris 10 install from a sunfire v240
with a single cpu to another sunfire v240 with dual cpu's. Here are the
details of the hosts as well as configuration.
I have 2 sunfire v240's. One has a single 1 Ghz cpu and the second has
dual 1.5 Ghz cpu. I want to move the disks of the single cpu host to
the host with dual cpu's. I want to keep the installed version of
Solaris 10 intact. The installation of Solaris is split across 2
mirrored disks, i.e. 4 disks in total. I am using Suns volume manager
for mirroring and also have one files system mirrored with zfs.
The questions I have are the following:
1) Can I simply shut down the servers and swap the disks to the
destination host, in the same disk slots? The controllers the disks are
on line up and are the same between the 2 hosts.
2) Will the kernel pickup the changes moving from a single 1 Ghz cpu to
dual 1.5. Ghz cpu's with out any problems? Will the kernel pickup the
faster cpu's speeds. i.e. will it know it is now running dual 1.5. Ghz
cpu opposed to a single 1 Ghz?
3) Would we have to break the mirroring on the OS before shutting it
down?
4) As another option, instead of swapping disks, could we swap the
cpus? Move the dual 1.5. Ghz cpu's to the other host? Will the
motherboards read the updates of the cpu or are their jumper settings we
would need to update?
Thanks for your help.

Box A
Sparc Solaris 9, Oracle 10g
Box B
Solaris 10 x86, Oracle 11g
I know there are many factors, but I'm pretty new to both unix & oracle, so I >needed some general steps to get me started. You have many options.
Since you're in 10g, Have the Target Database created in Solaris 10 x86, Oracle 11g.
you can use,
RMAN - Cross platform Transportable Tablespaces.
Datapump Export and Datapump import.
Read the following:
How To Use RMAN CONVERT DATABASE for Cross Platform Migration - 413586.1
http://download-uk.oracle.com/docs/cd/B19306_01/backup.102/b14191/dbxptrn.htm
http://www.oracle-base.com/articles/10g/OracleDataPump10g.php
http://www.oracle-base.com/articles/10g/RMANEnhancements10g.php#cross_platform_tablespace_conversion

Have macbook pro early 2011, blank hard drive (new), no install DVD, inadequate internet connection. How do I install an OS in the thing ?

Have macbook pro 15" early 2011, blank hard drive (new), Install DVD not available and an inadequate internet connection.
How do I install an OS in the thing ?
Can I purchase an installation disk? (I think it originally shipped with snow leopard 10.6.6)
My first time with Macs and I would love to get it going.
Thanks....

You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers.
You can upgrade the firmware to enable Network Restore: Computers that can be upgraded to use OS X Internet Recovery. After upgrading you can do the following:
Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I loaded iTunes on a new laptop. I copied and pasted my albums to a 4G stick and down loaded them to the new laptop. Placing them in, Libraries – Music – iTunes and than in Itunes used File – add file to library. So far so good. For what ever reason one o

I loaded iTunes on a new laptop. I copied and pasted my albums to a 4G stick and down loaded them to the new laptop. Placing them in, Libraries – Music – iTunes and than in Itunes used File – add file to library. So far so good. For what ever reason one of the CDs would not load onto the stick. I got the orginal CD and loaded directly to Itunes. Now when I look in Libraries – Music – iTunes it’s not there but it is in and plays in iTunes. What should I have done or should I be doing? Thanks.

It's not a unique situation - happens all the time, smaller hard drives getting filled up.
It's also easy to fix. I just moved my itunes content to a bigger hard drive.
First I made a backup of the itunes database file - iTunes Library.itl. Just in case anything went wrong.
Nothing did go wrong, but I'd have it in case anything DID go wrong. That file holds ratings, playcounts, Date Added, and other metadata.
Second, in itunes change the preferences > advanced tab to tell itunes to put everything on G:
Set the itunes folder location to something like G:Media or G:iTunes
This will affect all FUTURE additions to itunes and not do anything to the existing locations.
Make sure the checkbox for "Keep itunes organized" is NOT checked. I also left the "Copy files when adding" unchecked.
Third, to move all the files to G: without itunes losing the paths, run the File > Library > Organize > Consolidate command. This will need to run a while, so be patient as it copies all the files to the new G: location. This does NOT delete the originals. You will have to do that.
Fourth, make sure everything in itunes is OK and you can play stuff in your library. If you're really cautious you can run a script to check for missing/dead tracks.

My computer broke down and i needed to install everything new. t now all my music is only on my ipod classic. does anyone have an idea how to get it back to my computer without deleting it from the ipod?

my computer broke down and i needed to install everything new. now all my music is only on my ipod classic. does anyone have an idea how to get the music back on the computer without deleting it on the ipod?

See Recover your iTunes library from your iPod or iOS device.
tt2

Problems making Solaris 10 install disk for x86

I have an Ultra 40 M2. I made a boot/install DVD disk with Solaris 10 for x86.
The system just doesn't recognize it at all, like there is nothing in the DVD drive.
What am I doing wrong?
The DVD drive does recognize other DVDs, just not the Solaris 10 install one (I created two install disks to no avail)

How are you burning the DVD. What software/options.
Theres a howto here
http://www.sun.com/software/solaris/self_help.jsp#burning

Solaris 10 Install Hangs at 15% on my HP DL 585?

Solaris 10 Install Hangs at 15% on my HP DL 585
I have taken out all the additional extra cards so I am left with the basic box, it has been configured to run in Raid 1 so my four disks become two.
I can still get it to bring up a shell and do other things, but the installer just appears not to want to go pass 15%
Help?

Which version of Solaris and how much memory do you have in the system.

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

I just received my i phone 4,inserted Amayim with 4G plan,but showing noservice and bar with emergency calls only screen.Also when i down loaded i tunes to my laptop (windows7) there is an error(9808) message saying i tunes store not supported completely.

i just received my i phone 4,inserted Amayim with 4G plan,but showing noservice and bar with emergency calls only screen.Also when i down loaded i tunes to my laptop (windows7) there is an error(9808) message saying i tunes store not supported completely.

first of all the iphone 4 is not a 4G phone
second it sounds like your iphone could be locked to another operator then the sim you have inserted

Minimize and maximize Solaris 10 installed on VM virtual Box.

How can I minimize and maximize Solaris 10 installed on VM virtual Box.
Thanks
Paulo

Solaris is working just fine. Everything is ok. now since I open Solaris via VM Virtual box, the Solaris main page fills only half of the monitor. I can minimize/maximize the Virtual Box. But Solaris dimensions are fix and doesn't change. This leaves me a little room to open applications on Solaris. I had the same problems with my Ubuntu, by installing adds-on it was fixed. For Solaris I installed Guest additions, didnt help.
Thanks
Paulo

Adding packages from solaris 8 install disks

I need Solaris Make for Solaris 8. I have installed Solaris 8 off of downloaded Solaris 8 install disks. I apparently forgot to include Solaris Make in the install and now need to add it. When I copy the pkg SUNWxcu4t (the pkg for make and scc) and pkgadd it it claims installation is sucessful but still I have no make. It is supposed to install to /usr but there is no make there.
What am I doing wrong?
Thanks

Ok I have all of my compilling isuse resolved!
Just in case anyone else browsing this forum has the same problems here is what I have learned:
These are the relevent Packages:
for tools (ar, sccs, lex, yacc, make, nm, truss, ld, as)
SUNWbtool, SUNWsprot, SUNWtoo
for libraries & headers:
SUNWhea, SUNWarc, SUNWlibm, SUNWlibms
SUNWdfbh, SUNWcg6h
for ucb compat:
SUNWsra, SUNWsrh
You definatly need to use Solaris make (found in SUNWsprot), Solaris ar (found in SUNWbtool),
gnu tar, and gnu cc both from sunfreeware.com (I love pkg-get ^_^)
either add /opt/sfw/bin/ to your path or put a dynamic link for gcc into /usr/local/bin/ I prefer the latter.
and add /usr/ccs/bin/ to your path permanently.
Thanks for your help every one.

Trying to re-install Acrobat 8 and it's saying I need Internet Explorer 4.0 or greater installed. I have IE 11 installed so not sure what to do., Trying to re-install the full Acrobat 8 program and it's saying I need Internet Explorer 4.0 or greater insta

Trying to re-install Acrobat 8 and it's saying I need Internet Explorer 4.0 or greater installed. I have IE 11 installed so not sure why I'm getting that message.

Acrobat 8 needs IE 6.0 not 4.0
1) Try installing using MSI file instead of setup.exe.
2) Enable MSI logging and provide the MSI log. Steps to enable MSI logging can be found here http://support.microsoft.com/en-us/kb/223300
3) What is the version of shdocvw.dll in "C:\Windows\System32" folder and in "C:\Windows\SysWOW64" (exists only on a 64 bit machine) folder.

HT1665 why can't i down load my music from my laptop to my iphone.It is on my ipad.It does not sync.

why can't I down load my tunes from my laptop. The downloaded from my laptop to my ipad but will not syc to my iphone 4.

Tell us what you're doing when you connect your iPhone to your computer and open iTunes (BTW, this is the iPad forum, not iPhone forum).

HT1199 my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

I don't think it's exactly an incomplete installation brody, but most likely in-correct permissions somewhere along the line that either happened, or became magnified during the upgrade. Also, it could be corruption as well.
First thing to do, is boot up holding down Shift key to do a safe-boot so we an clean up any corrupted OS caches, after that do another reboot, but go to the Lion recovery, and scan the HD for errors, repair any if you find them, and then try to do a Repair Permissions job.
That should fix the issue, if not, we can start doing a PRAM reset and SMC for good measure.

Internet down in my solaris 10 installed laptop

Similar Messages

Maybe you are looking for