Internet download very slow

Hello,
First of all, sorry for my english but i'm still trying to learn
So, the problem:
With my internet connection i can download at 5 Mb/s but with archlinux the connection is very unstable.I start to download at 1 Mb/s and after a few second the connection drop at 100kb/s
I already disable ipv6 by grub way and tried both networkmanager and wifi-menu
ifconfig -a
wlo1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.9 netmask 255.255.255.0 broadcast 192.168.1.255
ether f4:b7:e2:45:c5:a9 txqueuelen 1000 (Ethernet)
RX packets 11982 bytes 13259672 (12.6 MiB)
RX errors 0 dropped 24 overruns 0 frame 0
TX packets 8799 bytes 1467896 (1.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
dmesg
[ 122.107871] wlo1: authenticate with 68:7f:74:03:14:f8
[ 122.120995] wlo1: send auth to 68:7f:74:03:14:f8 (try 1/3)
[ 122.122547] wlo1: authenticated
[ 122.123942] wlo1: associate with 68:7f:74:03:14:f8 (try 1/3)
[ 122.127358] wlo1: RX AssocResp from 68:7f:74:03:14:f8 (capab=0x411 status=0 aid=2)
[ 122.127468] wlo1: associated
sudo lspci | grep -i net
01:00.0 Network controller: Ralink corp. Device 539b
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
/boot/grub/grub.cfg
linux /vmlinuz-linux root=UUID=ffaa21ba-e3d0-49c3-8481-3a19d2d86907 ro quiet ipv6.disable=1
cat /etc/resolv.conf   
# Generated by NetworkManager
nameserver 192.168.1.1
cat /etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost
#::1 localhost.localdomain localhost
# End of file
for test my download i use file on this website:
http://www.thinkbroadband.com/download.html
I want try to put original driver by ralink:
http://www.mediatek.com/_en/07_download … php?sn=501
Someone can explain me how to replace with this driver?
Last edited by feboss (2013-04-11 22:45:11)

my Bit Rate change every second, is normal?
bash -c 'while [ 0 ]; do \
echo $(date +%H:%M:%S) ": " $(iwconfig wlo1 | grep -iE "rate|retries");sleep 3; done'
01:10:57 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:5788 Invalid misc:298 Missed beacon:0
01:11:00 : Bit Rate=43.3 Mb/s Tx-Power=20 dBm Tx excessive retries:5806 Invalid misc:298 Missed beacon:0
01:11:03 : Bit Rate=28.9 Mb/s Tx-Power=20 dBm Tx excessive retries:5840 Invalid misc:298 Missed beacon:0
01:11:06 : Bit Rate=43.3 Mb/s Tx-Power=20 dBm Tx excessive retries:5871 Invalid misc:298 Missed beacon:0
01:11:09 : Bit Rate=21.7 Mb/s Tx-Power=20 dBm Tx excessive retries:5914 Invalid misc:298 Missed beacon:0
01:11:12 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:5980 Invalid misc:298 Missed beacon:0
01:11:15 : Bit Rate=21.7 Mb/s Tx-Power=20 dBm Tx excessive retries:6028 Invalid misc:298 Missed beacon:0
01:11:18 : Bit Rate=14.4 Mb/s Tx-Power=20 dBm Tx excessive retries:6066 Invalid misc:298 Missed beacon:0
01:11:21 : Bit Rate=21.7 Mb/s Tx-Power=20 dBm Tx excessive retries:6110 Invalid misc:298 Missed beacon:0
01:11:24 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:6141 Invalid misc:298 Missed beacon:0
01:11:27 : Bit Rate=14.4 Mb/s Tx-Power=20 dBm Tx excessive retries:6180 Invalid misc:298 Missed beacon:0
01:11:30 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:6198 Invalid misc:298 Missed beacon:0
01:11:33 : Bit Rate=14.4 Mb/s Tx-Power=20 dBm Tx excessive retries:6216 Invalid misc:298 Missed beacon:0
01:11:36 : Bit Rate=14.4 Mb/s Tx-Power=20 dBm Tx excessive retries:6237 Invalid misc:298 Missed beacon:0
01:11:39 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:6276 Invalid misc:298 Missed beacon:0
01:11:42 : Bit Rate=14.4 Mb/s Tx-Power=20 dBm Tx excessive retries:6300 Invalid misc:298 Missed beacon:0
01:11:45 : Bit Rate=14.4 Mb/s Tx-Power=20 dBm Tx excessive retries:6336 Invalid misc:298 Missed beacon:0
01:11:48 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:6396 Invalid misc:298 Missed beacon:0
01:11:51 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:6437 Invalid misc:298 Missed beacon:0
01:11:54 : Bit Rate=21.7 Mb/s Tx-Power=20 dBm Tx excessive retries:6465 Invalid misc:298 Missed beacon:0
01:11:57 : Bit Rate=14.4 Mb/s Tx-Power=20 dBm Tx excessive retries:6485 Invalid misc:298 Missed beacon:0
01:12:00 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:6504 Invalid misc:299 Missed beacon:0
01:12:03 : Bit Rate=14.4 Mb/s Tx-Power=20 dBm Tx excessive retries:6518 Invalid misc:300 Missed beacon:0
01:12:06 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:6523 Invalid misc:300 Missed beacon:0
01:12:09 : Bit Rate=13 Mb/s Tx-Power=20 dBm Tx excessive retries:6534 Invalid misc:300 Missed beacon:0
01:12:12 : Bit Rate=14.4 Mb/s Tx-Power=20 dBm Tx excessive retries:6536 Invalid misc:300 Missed beacon:0
01:12:15 : Bit Rate=19.5 Mb/s Tx-Power=20 dBm Tx excessive retries:6547 Invalid misc:300 Missed beacon:0
01:12:18 : Bit Rate=57.8 Mb/s Tx-Power=20 dBm Tx excessive retries:6555 Invalid misc:300 Missed beacon:0
01:12:21 : Bit Rate=19.5 Mb/s Tx-Power=20 dBm Tx excessive retries:6557 Invalid misc:300 Missed beacon:0
EDIT 1: i start to thinking that the problem is my wifi card. tomorrow i begin to test my wifi with windows and ndiswrapper.
EDIT 2: Ok the problem is the wifi card, not archlinux. with windows i have the same problem and every computer in my house can download without problem at 5MB/s.
I will call hp support
Last edited by feboss (2013-04-18 07:25:00)

Similar Messages

  • Internet / download very slow on windows 8

    Guys,
    I have recently installed windows 8 on my macbook. Now I am having a problem, because my internet is super slow. Is someone familiar with this problem? what is the cause and solution? Does this have anything to do with the drivers from bootcamp which are still not available. Thanks

    The problem is likely that Apple has not yet released Win 8 drivers.

  • HT5622 hi,my name is kutan.since i updated ios7 on my ipad;internet got very slow,i can not open facetime no more,i can not download or update anything from apple store! so this is just redicilous! please any help?

    hi,my name is kutan.since i updated ios7 on my ipad;internet got very slow,i can not open facetime no more,i can not download or update anything from apple store! so this is just redicilous! please any help?

    It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
    You can get it here:
    http://gimp-print.sourceforge.net/
    You can download the latest version from here:
    http://sourceforge.net/projects/gimp-print/
    Have you downloaded the recent Apple update to Epson drivers?
    http://support.apple.com/kb/DL1398

  • My Internet is very slow!

    My internet is very slow, it takes a long time for webpages to load and things to download. Here are my speedtest results, if its helpful. http://www.speedtest.net/result/1029395537.png

    You are right the newer pc, as long as it is hardwired and free of any spyware malware and not unusually high cpu usage, should perform better. Is it running high usage?

  • IOS 6 upgrade prevented Youtube from working and internet is very slow

    Since I upgraded to ios6, the internet is very slow and youtube stopped working.  Tried to download youtube app from google in itunes but it has not been working.  Used to love my iphone 5 but now very disappointed.  At this point I'm considering to return the phone.  Tried using youtube in safari but nothing.  Any help is appreciated.

    If you JUST updated it, may be that Software Update is still downloading pending updates. Since Mountain Lion does that thru the App Store, so you can start that up and check in Update/Purchases/Check for Unfinished Downloads...
    Or you can start up the Activity Monitor in Utilities, click on the Network tab and if you see a solid green line pegging the roof, means the kitty is downloading stuff for all it's worth.
    Default setting is to automatically check for and download any available updates. Adjustable in System Preferences / Software Update.

  • After installing mountain lion i lost my pictures in iPhoto, lost my music in iTunes, internet became very slow. What can I do to fix this issues

    after installing mountain lion I lost pictures in iphoto, lost my musisc in itunes, my icluod is not working, internet its very slow and some other issues. There is a way how to fix these issues

    Open System Preferences > iCloud
    Deselect the box next to Photo Stream then reselect it.
    Now for your music. Launch iTunes. From the iTunes menu bar top of your screen click iTunes > Preferences then select the Store tab.
    Select: Music.  (and Apps and Books) if you want.
    Click OK.
    iCloud syncs via your Wi-Fi network so give it a minute or two to reset your photos and music.
    Slow internet ...   try turning off the modem for a few minutes, then turn it back on.

  • Internet is very slow but says i have a good connection ?

    My internet is very slow but yet i have a good connection please help

    Please answer as many of the following questions as you can. You may already have answered some of them. In that case, there's no need to repeat the answers.
    Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If the answer is no, do that now and see whether there's any change.
    Are any other web browsers installed, and are they the same?
    What about other Internet applications, such as iTunes and the App Store?
    Are there any other devices on the same network that can browse the Web, and are they affected?
    If you can test Safari on another network, is it the same there?
    If you connect to your router with Wi-Fi and you can also connect with Ethernet, do that and turn off Wi-Fi. Any difference?

  • At uni i need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can i do something about this without having to change settings everytime i change locations? running V3.6.8 on OSX

    At uni I need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can I do something about this without having to change settings every time I change locations? running V3.6.8 on OSX

    You can look at these extensions:
    *FoxyProxy: https://addons.mozilla.org/firefox/addon/2464
    *QuickProxy: https://addons.mozilla.org/firefox/addon/1557
    *SwitchProxy: https://addons.mozilla.org/firefox/addon/125

  • Internet performance very slow using DM-VPN

    Internet Speed very slow , when Tunnel establish by DM-VPN.
    HUB to Spoke and Spoke to Spoke Internet very slow. also local internet very slow.
    for contact: [email protected]
    +966-542239758
    Posted by WebUser Shahzad Khan from Cisco Support Community App

    You have posted your question in a Contact Center support forum.  You may have better success over in the Security forums found here: 
    https://supportforums.cisco.com/community/netpro/security
    Good luck and happy securitying!
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • HT1338 Mountain lion download very slow. 10 hours so far

    Mountain Lion download very slow. 10 hours so far

    It takes awhile.  Also, your ISP connection is part of the equation.
    Barry

  • Itunes app download very slow

    itunes app download very slow&iphone

    Close and relaunch iTunes.
    Reboot the computer.
    Power cycle the router/cable modem.

  • Firewall/VPN Model-SG300 Cyberguard after configuration internet working very slow....please help me...

    HI FRIENDS,
    i have one firewall model number sg300 i configured each and everything
    but after configuration internet working very slow.if i want to open any website it is taking 5 min .i connected
    my lease ling directly in this device.
    please help me....
    Thanks,
    Madhukar 

    Hi Madhukar,
    It seems that it is not a hyper-v issue .
    For troubleshooting this please use your computer to access internet directly (without firewall ).
    If it works well , you may go over the configuration of the firewall .
    Also you can contact the hardware vendor .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Internet connection very slow and cannot download IOS 5as its takes 6 hours and then apple has timed me out .  Can any one help?

    Internet connection very very slow and it takes 6 hours to download IOS 5 which by that time I am timed out .  Can anyone help

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Fast fios on internet BUT VERY SLOW DOWNLOADS that also drop out and stall!

    Spent hours on with customer service to no help!
    FIOS works great and fast exploring and browsing the internet but beginning to today for no apparent reason on every computer on my network using MAC's every download is SLOW. For instance 500mb take 2 hours+ when normally they take 2 minutes to download. Also, every 1 of 2 downloads stop and don't even finish.
    Any ideas or suggestion will be incredibly grateful!!!!

    Is video streaming from various websites also affected? How about uploads?
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • How can I determine if my iMac is infected with Malware.  Internet is very slow at times.

    Some time ago I opened a link in an email from a friend and later found out that his email address had been hijacked.  The site the link took me to seemed innocuous, but ever since it seems that from time to time that my internet connection is very slow, as if there is not enough band width.  Is it possible that my computer is infected with some sort of malware?  How can I determine that?  If it is infected how can the malware be removed?

    Here is the report.
    Problem description:
    I clicked on a link in a email from a hacked email account and since then my internet connection runs very slow at times.  I am concerned that my iMac may be infected with some sort of Malware
    EtreCheck version: 2.1.6 (109)
    Report generated January 21, 2015 at 12:26:10 PM MST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      iMac (21.5-inch, Late 2009) (Technical Specifications)
      iMac - model: iMac10,1
      1 3.06 GHz Intel Core 2 Duo CPU: 2-core
      12 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1067 MHz ok
      BANK 0/DIMM1
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM1
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400 - VRAM: 256 MB
      iMac 1920 x 1080
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Time since boot: 1:8:36
    Disk Information: ℹ️
      WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 499.25 GB (398.65 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      PIONEER DVD-RW  DVRTS09 
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] com.symantec.kext.SymAPComm (12.7.1f4 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.filesecurity (12.7f4 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.fw (5.3.1f4 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.internetSecurity (5.4f4 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.ips (3.9.2f1 - SDK 10.8) [Support]
      [loaded] com.symantec.kext.pf (5.7.1f4 - SDK 10.8) [Support]
      /System/Library/Extensions
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) [Support]
      /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) [Support]
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) [Support]
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) [Support]
    Launch Agents: ℹ️
      [running] com.brother.LOGINserver.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.symantec.errorreporter-periodicagent.plist [Support]
      [loaded] com.symantec.nis.application.plist [Support]
      [running] com.symantec.uiagent.application.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [running] com.fitbit.galileod.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [running] com.sec.faxdb.plist [Support]
      [running] com.symantec.deepsight-extractor.plist [Support]
      [loaded] com.symantec.errorreporter-periodic.plist [Support]
      [loaded] com.symantec.liveupdate.daemon.ondemand.plist [Support]
      [loaded] com.symantec.liveupdate.daemon.plist [Support]
      [invalid?] com.symantec.MissedTasks.plist [Support]
      [not loaded] com.symantec.nav.migrateqtf.plist [Support]
      [invalid?] com.symantec.Sched501-1.plist [Support]
      [running] com.symantec.sharedsettings.plist [Support]
      [running] com.symantec.symdaemon.plist [Support]
      [invalid?] com.symantec.symSchedDaemon.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [invalid?] com.google.GoogleContactSyncAgent.plist [Support]
    User Login Items: ℹ️
      Microsoft AU Daemon Application  (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
      Fitbit Connect Menubar Helper Application  (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
    Internet Plug-ins: ℹ️
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.3.8.1 [Support]
      AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
      FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
      CouponPrinter-FireFox_v2: Version: Version 1.1.6 [Support]
      GarminGpsControl: Version: 2.9.3.0 Release [Support]
      NortonInternetSecurityBF: Version: 1.11.0 - SDK 10.6 [Support]
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 7.1 [Support]
    Safari Extensions: ℹ️
      Norton Internet Security [Installed]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Norton\nQuickMenu  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 499.25 GB Disk used: 100.60 GB
      Destinations:
      Seagate Backup Plus Drive [Local]
      Total size: 1.00 TB
      Total number of backups: 15
      Oldest backup: 2013-08-01 22:49:49 +0000
      Last backup: 2014-11-06 19:34:10 +0000
      Size of backup disk: Adequate
      Backup size 1.00 TB > (Disk used 100.60 GB X 3)
    Top Processes by CPU: ℹ️
          5% WindowServer
          1% Fitbit Connect Menubar Helper
          0% fontd
          0% AppleSpell
          0% launchservicesd
    Top Processes by Memory: ℹ️
      580 MB com.apple.dock.extra
      322 MB SymDaemon
      206 MB Google Chrome
      168 MB spindump
      155 MB mds_stores
    Virtual Memory Information: ℹ️
      7.46 GB Free RAM
      2.59 GB Active RAM
      1.51 GB Inactive RAM
      1.05 GB Wired RAM
      2.56 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Jan 21, 2015, 11:23:52 AM /Library/Logs/DiagnosticReports/rpcsvchost_2015-01-21-112352_[redacted].cpu_res ource.diag [Details]
      Jan 21, 2015, 11:18:14 AM Self test - passed

Maybe you are looking for

  • Can't print from Tiger to a shared printer on Mountain Lion

    Hello, I have a branch office that's running Mountain Lion on one computer and Tiger on the other.  How can I print from the Tiger machine to a shared printer on the Mountain Lion computer?  I should point out that this isn't a problem when the print

  • Urgent :Using a font face name in a JtextPane

    1)How can I use a font face name for setting the font of the text I display in a JTextPane.A call to textPane.setFont() does not work I could find a method StyleConstants.setFontFamily() , but , if I'm not wrong, that would set the font family only a

  • Screen Sharing not remembering Dual Monitor preferences

    Before I upgraded my my MBP to Snow Leopard, Screen Sharing would remember to connect to only the primary monitor on my G5. In Snow Leopard, I can't get it to remember it, so it connects to both monitors by defualt each time I use it. Anyone have sug

  • SCCM 2007 & 2012

    Hi everyone, I need a urgent support. In my organization we have sccm 2007 & 2012 environment. Both are not interconnected few clients connected to 2012 and rest in 2007. Person who handled this technology earlier has designed, i don't know the exact

  • Call settings menu

    My caller id was set to not send a few weeks ago by my brother and it now does not appear in the menu my phone is a nokia 6230i when i go to call settings in the maual it says there should be 8 options but there are only 4 and caller id is not one of