Internet Dropouts and Internet Connection Trouble; POSSIBLE SOLUTION

Here is something that might help
I have had problems with this on my old G5, Intel Macbook, and More Recently my Mac Pro (past 4 years I have airport trouble)
I spent hours trouble shooting, the thing that ends up working for me three times so far has solved my problem
Here is a step by step instruction of what I did (continue anyway if you are not receiving the same circumstances/results)
Remember this is also a diagnostic method for yourself to see what is working and what is not so you can solve the problem. Also I still get network drop outs and sometimes internet performance decrease but a lot less frequently by performing the steps bellow. If your problem persists then I might be able to trouble shoot with you. In no way this method will be successful and your problem may become worse so use discretion when applying the steps below
1)Check "Console" to see whether broadcast is being dropped (utilities folder)
2)Make sure your problem persists with all other applications not running (including your virus software)
3)Reset Safari and continue loading to see if network performance is still hanging up
4)If slow loading persists/airport drops shut down computer and boot into safe mode by holding shift key (this empties cache stuff and does a few repairs)
5)Load Safari and see if slow loading persists (while in safe mode)
6)Go to disk utility and repair disk first (or verify)
7)If disk comes clean then precede to repair permissions, there are many errors that show up that are nothing to worry about "ACL found in different place" is one of them.
8)Shut down, (do not restart and wait for 10 sec, I have no idea why this happens and it does not make sense to me but I have restarted and ended up with some other problems)
9)Turn on computer and proceed to disk utility again (do not worry about airport, do not touch yet
10)Verify disk again (remember not in safe mode)
11)Repair permissions once again (different things are loaded into the permission system; plugins ect.)
12)Shut down computer again
13)Turn on computer and proceed to open network preferences and remove airport service (make sure your changes are applied)
14)Open key chain access
15)Delete your network password (if it exists) in "login" and in "system"
16)Shut down computer once again
17)Reapply all network configurations in the network preferences panel
18)Shut down computer once again and turn on
19)Check airport performance over the next 30 min or so by clicking links actively and waiting
20)If problem persists you may have corrupted files somewhere and may have to delete some preference files and perform the method above once again (to be safe I suggest running the disk utility test once again)
note: for some reason Leopard still remembers old network information even after deleting it. you need to find a way to keep leopard from using old preferences (it can be any of them). If all thus fails trash your router settings (on your router, factory defaults) and perform the steps above once again)
Please report abnormal occurrences like the "self assign ip address problem in network preferences" so we can narrow down where problems are mostly occurring"

I quote from the System Preferences Help:
If your computer is connected to the Internet, you can share its Internet connection with other computers on your local network.
For example, if your computer is connected to the Internet using a DSL modem and has an AirPort Card installed, you can share the DSL connection with other AirPort-equipped computers.
On Windows computers, sharing your Internet connection is sometimes referred to as a “network bridge” or “bridging your network.”
To set up Internet sharing:
Choose Apple menu > System Preferences and click Sharing.
Select Internet Sharing.
Choose the Internet connection you want to share from the “Share your connection from” pop-up menu. For example, if you’re connected to the Internet over Ethernet, choose Ethernet.
Select how you want to share your Internet connection in the “To computers using” list. For example, if you want to share your Internet connection over AirPort, select AirPort.If you share your Internet connection using AirPort, click AirPort Options and give your network a name and password.

Similar Messages

  • Internet connecting trouble. Nokia 5235

    Hi guys!
    Since there is no WIFi on this version of Nokia, I'm trying to connect with Ovi Suite.
    Going to Tools-Connect to internet:
    You are connecting to *** with your ***. Costs may be blablabla
    Get an error: Failed to establish network connection.
    Proxy name & pass seem to be correct.
    What is then the problem?
    Cheers

    try connecting using manual settings... enter your access point name and then connect

  • Internet connection troubles on ipod touch

    i am trying to connect my ipod to the internet and it's not working so well...
    i have it connected to my wireless thinger but it doesn't connect to the internet.
    a message comes up saying 'cannot open page' or 'safari cannot open the page because it is not connected to the internet' or 'cannot connect to itunes store'.
    and ideas on how i can fix this?? or if im connecting it properly...
    i am on the wireless that i have in my house, so i know the password and everything, but some of the spots where you put some info are blank and i dont know what they mean..maybe this is causing it?????

    do you have the latest 2.2 update?
    Check your router settings for the following:
    DHCP - on
    MAC filtering - off
    SSID - on
    Encryption - on (WPA or WPA2 are more secure and easier to implement then some really long WEP key. Also make sure when you are logging on the the Encryption Type matches what the router is using. This is really easy to overlook.)
    For some more esoteric router settings to look at:
    DNS - obtain automatically from your ISP
    WiFi radio mode - b/g or b/g/n (in other words, broadcast in all modes available on the router)
    iPod Touch things to do:
    If you are not getting connected symbol on the top left, reset your Network settings first. Settings > General > Reset > Reset Network Settings
    If you are getting a connected signal, but you cannot connect to a website and certain parameters are missing (like router IP, DNS IPs), try turning WiFi off and then turning it back on. If that doesn't do it, try renewing your lease: Tap the blue arrow next to the network you are connected to, tap DHCP, and then tap Renew Lease.

  • 4 MONTHS AND NOTHING BUT TROUBLE- NO SOLUTIONS ANY...

    Joined BT in March 2011 -great almost 3mb (rural area) - stable at 2.4mb 1 week later .
    Gradually got worse and erratic the last 6 weeks -dropped connection very slow -down to 855 -less than 1mb.
    Over a week of constant call -all replied to by Indian call centre - they decided to tell me "there were lots of errors on my line " !?
    Eventually today a BT engineer came out -checked everything -no errors !!!
    Replaced the one socket i had with one with built in filters , changed connectors outside in 3 boxes on estate.
    Told me i should be back up to almost 3mb as thats what it was round here .
    Told to wait 4 hours for improvement .
    7 hours later -NO IMPROVEMENT !
    In fact its back to just over 1mb -SLOWER THAN BEFORE !
    At my wits end and sick of being fobbed off and the Indian call centre -who are totally ignorant .
    I rang them tonight -again said there were errors on my line and they would "FIX THEM !" AND RING ME BACK .
    GUESS WHAT -THEY DIDNT !
    4 MONTHS AND HAD ENOUGH - EVEN WORSE THAN TISCALI !!!!!-  I was with them 8 years and had loads of problems -BUT didnt expect them with BT in 4 months !
    I have no idea how to post these stat things -been doing BB checker tests at regular times and tried different tests .
    All showing just over 1MB .
    I got 1.5 with Tiscali !
    Ready to leave already !!!!!!

    in order to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com and post the results .
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • IPod Touch Updating to OS 3.1 & Windows Connection Issues Possible Solution

    Hi everyone,
    I may have found a solution to "there was a problem downloading ..." error message. I had recently setup some content filtering on my router, and after disabling it, my iPod Touch 2nd gen is finally updating to OS 3.1.1. Please note that this may be common and this maybe due to keyword filtering, for example: xxx or w4m, etc; apparently, somewhere in the link to download the new OS, the content filter ends up blocking the download.
    So checkout your routers or content filtering software and temporarily disable the filters until the update is complete.

    You will get a prompt to restore, or set up as a new ipod. you dont want to restore from the windows machine, and dont want to set it up as a new ipod. you should restore it on the mac, after the update.

  • 2 airport extreme base stations later and still no internet connection-

    Sorry - yet another beginner with internet connection troubles! (I have read all the posts I could find relating, but without any help).
    I have had a Demon broadband account now for about a month (I’m in the UK) and in that time I have purchased a D-Link DSL-300T Ethernet modem and an Airport Extreme Base Station. I got wireless internet working relatively easily – with a powerful range over the whole house and garden, but then one Sunday night, the internet connection via the base station suddenly ‘died’.
    I spent the following 3 days scrutinising all of my settings of both the Modem and the Base station, re-setting both, and bought new Ethernet cables / micro filters etc but with no luck. (I’ll point out at this stage that my broadband account is still active, and if I connect the Ethernet modem directly to my iBook [wired] I can still get my broadband connection. Alternatively, I tried daisy chaining the modem to the base station and then via an Ethernet cable to an iBook, but no connection could be made).
    When wireless, Airport Admin recognises there is a modem there, and under preferences > network under Airport it states I am connected to the internet – but I’m not.
    I then phoned D-Link and they confirmed my firmware was up-to-date for use with Apple products and talked me through all of the modem settings and tweaked a few things, but there was still no connection to the base station. I then phoned Apple. They were incredibly helpful (as ever) and after 35 min. came to the conclusion the base station might not be re-setting itself properly. The replacement one came yesterday, and again I spent a number of hours trying to get it connected to the internet, but there is still no internet connection via airport and I can confirm this from both my eMac and iBook.
    Reading through the forums on here, I understand that my particular modem is problematic with the base station, but I can’t work out why it use to work and now it doesn’t! One theory I have investigated is that the firmware of the base station is two advance for the modem following an update, but after reinstalling the original firmware I started with, I still have no luck.
    - The eMac is running 10.3.9 / iBook is running 10.4.3. The base station is reinstalled with the latest firmware via system update. The first base station and the modem were delivered to me 31/10/05.
    Any help or suggestions would be really appreciated if anyone has any ideas
    Thanks for your time
    Will.
    UK.

    http://discussions.apple.com/thread.jspa?threadID=2316
    78&tstart=0
    I think if you follow the instructions I gave in this
    link you will be fine.
    Remember, If you for any reason loose your
    connection, it is normally always a Power Issue..Your
    ISP is down for service ..or some other anomoly, If
    you were good before your settings will still be
    good...Good Luck...Don
    Hi Don,
    Thanks for you quick response. I printed off the instructions you posted on the support forum before, and ran through your procedue exactly, (twice) but I'm sorry to inform you that I haven't been able to re-establish my wireless internet connection. Would it be safe for me to assume at this stage that my modem is indeed fualty? It contines to work fine independantly, (I'm using it right now) but it can't seem to make contact with the basestation.
    Will.

  • Transferred old apple settings, now no Internet connection

    I just transferred all my old settings from my old Airport Extreme to the new Dual Band one. I then followed the prompts and unplugged the old AE, and plugged the WAN connection into the new AE.
    Now, I have no internet, although my new AEDB shows green light... Anyone know what I can do about this?

    I have solved this issue. It was a combination of two problems. When I migrated the settings from the old machine, I also created a Guest Network for a friend that was visiting. My Macbook Pro joined the Guest Network which for some reason was NOT sharing Internet connection.
    The solution was to turn off the Guest Network and allow the MBP to connect to the correct IP range.
    Chances are that not completely restarting the machine was a reason for not being able to join, but I did restart the machine yesterday a few times and wasn't getting any help.
    Anyhow, for whatever it is worth, my situation is solved. Not sure what will happen when I need to re-enable the guest network.

  • WRT54GL internet connection through DHCP

    I'm having problems connecting my modem (D-Link DSL-320B) with my router (WRT54GL).
    If I connect my modem with my PC I have an internet connection. The modem authenticates to my ISP and has an DHCP server running on the LAN port. So far this is the only way I can get an internet connection. I can't use bridge mode because my ISP doesn't support it.
    I want to route my internet traffic through my router (QoS and other stuff).
    On the router I can switch to DHCP on the WAN port. Then the router receives internet IP address, DNS server and so on. I see that on the web interface. The problem is PC's connected to the router have no internet connection.
    The strange thing is that I can't get internet connectivity from the router either. Ping and trace from the router itself can't reach the target, not even the modem.
    Modem (D-Link DSL-320B)
    Connection Type: PPPoA VC-Mux
    IP Address: 212.183.47.126
    Subnet Mask: 255.255.255.255
    Default Gateway: 62.47.95.239
    Preferred DNS Server: 195.3.96.67
    Alternate DNS Server: 213.33.98.136
    LAN
    IP Address: 192.168.2.1 
    Subnet Mask: 255.255.255.252 
    DHCP Server: ON 
    Router (WRT54GL)
    Connection Type: DHCP
    IP Address: 212.183.47.126
    Subnet Mask: 255.255.255.255
    Gateway: 192.168.2.1
    DNS: 195.3.96.67, 213.33.98.136
    Status: Connected
    Router IP Address: 192.168.1.1
    Subnet Mask: 255.255.255.0
    DHCP: 192.168.1.100 - 192.168.1.149
    I have read other threads but found no solutions to my problem.
    There are two DHCP server connected after each other but they are in different networks so that shouldn't be a problem.
    I want to handle my router the internet traffic because I want to use QoS and some other stuff.
    Has anybody an idea that to do?

    Thanks for the idea, it just doesn't work.
    I turned of the DHCP on the router and changed the IP address. Also I changed the subnet mask on the modem to 255.255.255.0 to allow more clients.
    As a result PCs don't get an IP address automatically anymore. So I configured the IP manually on my PC.
    Still no internet connection.
    Your solution works if I connect the modem to a LAN port of the router. Then the router is acting as a switch, and all internet traffic is handled by the modem (the modem is also acting as DHCP server for the entire network).
    A working solution but just not the solution I want, sorry (I want my router to handle internet traffic for QoS and some other stuff).

  • Trouble with my wireless and cable internet connection​s with S05

    I got a Lenovo S205 last month and have been having trouble connecting it to the internet.
    I connect wirelessly to my internet box and sit about 1m away from it. Even though I am so close and my connection shows full strengh on my computer when I am browsing the internet pages often fail to load or miss images or css. I can sit and hit refresh for a mintue before the page loads but my wireless icon never says it has lost connection or signs me out of msn etc.
    I tried a different brower to check it was not that but it is still the same. I also find when speaking on skype that my video feed will stop and start again and the sound doesn't come through smoothly.
    Because of the trouble and how close I am to the internet box I tried with a cabel but when I plug it in and turn off wireless the computer doesnt seem pick it up and says I have no connection. I tried the same cabel in my old laptop and it worked fine so it seems something wrong with my port.
    What can I do to fix it? Thanks
    Stephanie

    hey steffi,
    try uninstalling both the wired and wireless drivers for your unit.
    let windows install its own generic drivers and try again on both wired and wireless connection at your home.
    if possible, try it at a different location and see if it makes any difference. If you are able to connect and have no problems browsing the web on a different wireless/wired connection, then you will need to check the settings of your home's modem
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Having trouble with internet connections using my Apple G5. Updates turn out to be incompatible with my system. What should I do short of trashing the wonderful computer and spending cash I don't have on a new iMac?

    Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
    Chuck's Dilema

    Hi Chuck,
    TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
    http://www.floodgap.com/software/tenfourfox/
    I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
    SeaMonkey seems pretty fast also, with many options...
    http://www.seamonkey-project.org/
    http://www.seamonkey-project.org/releases/
    Might also look into iCab & OmniWeb versions.
    Also...
    The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
    Texas Mac Man's Flash hack/post...
    https://discussions.apple.com/thread/3599648?tstart=0
    Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
    Might be later ones around also... saw 11.3 I think.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
    See in each Browser which version of Flash it thinks it has...
    http://kb2.adobe.com/cps/155/tn_15507.html

  • Lost Mode and Play Sound are "Pending."  However, iCloud indicates that it connected and backed up to iCloud at a date that is 1 week after it went missing.  How is this possible without locking (Lost Mode Pending an internet connection)

    Hi,
    My wife lost her iPhone two weeks ago while on vacation in London (cell service inoperative in foreign country).  Using Find My iPhone app on my device, I activated Lost Mode and Play Sound.  However, both are listed as "Pending," since it those actions require the phone to connect to the internet (wifi only due to no cellular data coverage.).
    We recently returned home and purchased a new iPhone.
    However, when looking to restore the apps/settings from her old phone using a previous iCloud backup, iCloud indicates that the old phone connected to iCloud and backed up the original phone at a date that is 1 week after it went missing.  How is this possible without locking (Lost Mode Pending an internet connection)?
    If the phone was activated and connected to the internet via a wifi signal, shouldn't it immedately lock, show up on the map, Play Sound, and send me an email that the phone has been found?
    I also read somewhere that if running iOS 7, the iCloud website interface enables you to track previous locations, for instance if the phone moves from wifi hotspot to hotspot.  Is that true?  If so, how do I do that?
    Thank you for your time, and have a great day!
    Sincerely,
    - Matt

    just giving this a wee bump as time is of the essence here and i need advice/ answers quick!
    apologies if i've broke any rules!
    alex

  • I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

    Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

  • Hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

    hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

    use it on a diffrent network if u dont have a mc donalds or sone other place to test it most librarys have wifi just to make sure its not that if its not the wifi falut and the app has been re installed may be a bug since this game is still pretty new

  • HT201272 Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error... I have tried all possible solutions i found on internet...my restrinction

    Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error...
    I have tried all possible solutions i found on internet...my restrinctions are disabled...tried reinstaling, relogging, restarting phone.. nothing seems to help...
    normally i would contact custommer support but i m using US account and i m not from US. anyway my US account is charged with money and it workes perfectly for all my other friends using this method ( we got some free US vouchers so we needed US accounts)
    Any advice?
    thanks in advance

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?  Thanks!

    I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?
    If not why option available
    Thanks!

    What Carolyn says is correct. You can, however, share an Internet connection with your iPhone wirelessly by turning in Internet sharing (found in System Preferences > Sharing.) If your MacBook Pro is already using a wireless connection, you can just connect to the same wireless network it is using.
    Best of luck.

Maybe you are looking for

  • How to get the output of a subprocess

    Hi all, I am trying to create a process in which I need to use a gateway with a number of branches. Within each of these branches I need to call a subprocess (in which I have a user assignment) where the user fills in a form. Each of the branches are

  • Is it possible to change the dimensions of the project in CS5?

    Hello all, I am currently creating a digital sign which is split into 2 regions. In the first region I have a PowerPoint which displays menu items and their prices. In the second region, I want to have a video which I have edited in Premiere Pro CS5

  • Printing indicator in mat. doc

    Dear all, When viewing a material document in MB03, it is found that the print indicator is selected, but none of the printing options: Individual Slip/Indiv.Slip w.Inspect.Text/Collective Slip is selected. I just wonder how user could do so, as it i

  • Jdeveloper documentation resources for Beginners

    Over 90 % of the information on Jdeveloper is located in the Jdeveloper online help documentation located as follows : On Jdeveloper's menu bar, look for and select ---> Help -->"Help Topics" 1) Jdeveloper "tutorial and sample applications" section i

  • Skype unlimited subscription option not available

    I subscribed to Skype unlimited minutes subscription to +91 destination (mobile & landline). Later, after a week or so, when I visited Skype to suggest same offer to one of my friend; I didn't find it. My question is 'how to I renew my subscription n