Internet Explorer 10 / 11 Advanced Tab settings not being completely applied
I am trying to enforce settings for the Advanced Tab in IE10 / 11 in our environment. I have one GPO applying these settings, with no other GPOs that are going to interfere. RSOP shows the policy is being applied, and I can even test it by changing
a setting and running a gpupdate /force to have it changed back. The weird thing is, not all of the settings on the advanced tab are being enforced.
Here's a rundown of what I'm doing:
I'm setting up policy in User Configuration > Preferences > Control Panel Settings > Internet Settings
And then I'm creating a new "Internet Explorer 10 properties" thing
Then I'm going into the advanced tab and setting the settings I want and hitting F6 to change them to green as seen in the screenshot below. Please notice the highlighted ones, as these are the ones giving me the problem.
Those two settings are not being enforced. I then noticed that on the Group Policy Management window on the Settings tab, those two settings (amongst a handful of others) aren't even listed even though I clearly have them set in the screenshot above!
Why are these settings missing? It seems a number of them actually aren't here. I realize I can enforce this with registry edits but if the option is in Group Policy then why is it not working? Oh, and the reason it says (Order: 2) is because the settings
being used for "Order: 1" are for IE 8 and 9. There is nothing conflicting between the two either. My main concern here is why are they missing from that screenshot I posted above?
does the editor seem to be writing the settings into the XML? (check in the policy folder on sysvol)
if not present in the XML, then it's maybe a bug in the prefs editor (there have been a lot of bugfixes over time).
check for hotfixes, e.g.:
http://support.microsoft.com/kb/2885557/en-us
http://support.microsoft.com/kb/2798787/en-us
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Similar Messages
-
I can't download videos to Real Player. The settings are correct and i can download in Internet Explorer 7 with no problem but not FireFox 5...any ideas??
I'm still experiencing this problem. I went to settings, general, software and it says Install now. But when I try, I get an error message.
-
Setup system check says internet explorer is open when it's not
When I get to the setup screen (for the trial version of Illustrator), the first thing is system check. It says my internet explorer is open, and it's not. I've closed all programs that use internet including all of my antivirus and spyware, my vista sidebar, etc. I've opened task manager, gone into processes and tried to end the internet processes but they show up a second later. They just won't close! I've messed with my automatic startup programs, and that didn't work either. I've taken my ethernet cable out and tried that. Nothing works. Anybody know what's going on?
Does the performance tab of Task Manager show abnormally high CPU usage even when you have nothing running?
You might have some piece of malware doing nasty stuff. What's showing up as iexplore.exe in Task Manager is probably not Internet Explorer at all.
Update all your antivirus and spyware definitions and run thorough scans.
Do a Google search with keyphrase 'internet explorer constantly running,' and you'll turn up some discussions with links to malware removal tools. -
The Option Window in Firefox is incomplete. It only shows
General, Tabs, Content, Applications, Privacy, Security, Sync
The Advanced Tab is not showing and the Browse button to change download location is missing also.If you are using an add-on theme switch to the default theme. If that isn't the source of your problem ....
Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
The Advanced tab is not showing up when I click the file menu
I use this version of PowerPivot 10.50.4000.0 and the advanced tab is not available in the file
menu. Why?Hi Todor, have you already tried enabling it from within the Power Pivot Windows by clicking
File > Switch to Advanced Mode?
http://msdn.microsoft.com/en-us/library/hh272055(v=sql.110).aspx
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn -
Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD
Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD.
I am trying to find out what GPO setting is causing this so I can change I.E. settings at a desktop running Windows 7.
A GPO has I.E. locked down so settings are greyed out for Intranet settings so I can't change Intranet settings.
How do I enable so I can save changes with a GPO?Classic GPO using Administrative Templates, is designed to do exactly that (disable the UI).
Previously, you could use IEM in preference mode.
Now, you'll need to use GPP, but there are a couple of limitations.
Check the IE10 IEAK documentation (it's useful for understanding what you can do with GPP)
http://technet.microsoft.com/en-us/library/jj890998.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do
HI Bill,
Did you set Internet Explorer as the default browser? If not the set it as the default. Check to see if you can do custom install
Thanks
Scott
Here is the system req.
Photoshop Elements 6.0
Windows
Intel Pentium 4, Pentium M, or Intel Centrino 1.3 GHz (or compatible) processor
Microsoft Windows XP with Service Pack 2 or Windows Vista
256 MB of RAM (512 MB recommended)
1.5 GB of available hard-disk space
Color monitor with 16-bit color video card
1024 x 768 monitor resolution at 96 dpi or less
Microsoft DirectX 9 compatible display driver
CD-ROM drive
Web features require Microsoft Internet Explorer 6, Netscape Navigator 7.0, or Mozilla Firefox 1.5
Languages -
I purchased a move through iTunes, but I can't transfer it to my iPhone. I have followed all the directions I've found on the Internet, but under the Advanced Tab, create iPod or iPhone Version is never enabled, only the create AAC Version is enabled. What am I doing wrong?
iPhone User Guide (For iOS 4.2 and 4.3 Software)
-
My open tabs are not being remembered when I close and re-open Firefox 4 even though I selected this feature in Options. Can anyone tell me why?
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed. -
i am unable to import my favorites from internet explor due to the import data from... option being grayed out under his, library, import. any help please
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode" -
Internet Explorer 10 IEAK capturing Security Settings
I am trying to package a custom installation for Internet Explorer 10 using IEAK. I am having some trouble with the Import Security Settings portion of the tool.
It is failing to import the security settings. It says it has imported them, but upon installation the security settings have not been included in the IE 10 installation.
Looking at the "INS" folder that is built and the custsec.inf file create there, I can see that only two security settings have been captured -- "1401" and "2500" and none of the other 50 or so security settings are collected
for any zone.
In addition, I have trusted sites set to not require HTTPS, but that selection is not captured into the custom IEAK generated browser installer.
Does anyone have any tips on how to successfully deploy a customized version of IE 10? I am even more reliant now on IEAK since IEM mode was removed from Group Policy, so I reall need to figure out why it doesn't function correctly.More...
When ActiveSetup is run on a 64bit OS, first all the 32bit ActiveSetup keys are run first, and the 64bit ActiveSetup keys are run second.
The problem is that IEAK is adding the CUSTOM ActiveSetup to the 32bit key, and the ie4uinit.exe is added to the 64bit key. While the IEAK has an ">" listed in the GUID (to signal for it to run last) it runs "last" in the 32bit
ActiveSetup commands. The 64bit ones (which the ie4uinit.exe is part of) all run after the 32bit stuff....
So it appears that IEAK is not designed to build an IE 10 installation that will run correctly on 64bit OSes. The IEAK CUSTOM settings will always apply prior to the ie4uinit running. I suppose this can be changed by further manipulating the
registry after IEAK customized IE 10 is installed and making sure the >{GUID} entry is moved to the 64bit registry.
I suppose another way to look at it is ie4uinit is not correctly noticing that that the user settings are already present in the user's registry and is wallpapering over them with the incorrect settings. Either way, the end result is that the incorrect
settings are being configured for the user on first logon.
I find it difficult to believe that Microsoft IE team has messed this up and that no one has discovered it before. (I'm not being sarcastic) That makes me question what I am doing that is incorrect because I can't believe that a problem like
that would exist in a product as major as IE - and that no one has run into it and blogged about it. I must have
something incorrect, but I really can't figure out what it is. Why is IEAK's IE 10 writing that CUSTOM ActiveSetup into the 32bit registry on a 64bit machine? Maybe it will work to just move the CUSTOM key from 32bit to 64bit at the end
of the installation.
Looking closer, the IE installer writes to both the 64bit and 32bit ActiveSetup areas in the registry. The problem is that the 64bit one never runs because the 32bit one has run already and ActiveSetup runs only once. So the IEAK CUSTOM
runs once out of activesetup in the 32bit registry. Then the IE4Uinit runs once from the ActiveSetup 64bit registry area, then the IEAK CUSTOM ActiveSetup is evaluated (it has the same GUID as the 32bit one) ActiveSetup decides that GUID has already
run and doesn;t run a second time.
I have been able to solve my problem simply by deleting the IEAK CUSTOM entry in ActiveSetup under the 32bit registry area I just look at each subkey of HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Active Setup\Installed Components
Looking at the string values of StubPath in all the subkeys I find one with the value "RunDLL32 IEDKCS32.DLL,BrandIE4 CUSTOM" and I delete the parent key from ActiveSetup. (don't delete the one in HKLM\Software\Microsoft\ActiveSetup)
This makes it so that IEDKCS32 always runs after the ie4uinit thing, and that makes everything work as planned. I have no idea why I have to do this. Hopefully someone else will find this saga useful in their own situation. -
Internet explorer 11 the first tabs dont loa
Hello,
i have a having some problems with internet explorer 11 in windows 8.1 desktop mode on my boss notebook
when i open ie the first page load the most viewd pages, but dont let me go to any site the title change to ne new site i want to go but the page dont change, and when the load status on title finish the tile go back to the previus one
ei
let suppose that the first page is msn.com and whant to go to office.com. i type on office.com on the address bar and hit enter
the title tab change to msn to office.com and loading page icon on the tab start
when the loading icon finish the title go back to msn.com
alweys the 1 tap is unusable, i neet to create a new tab and type the url that i whant to go
any sugestion ?
sorry for bad englishHi Raffav,
I understand the issue now. The issue here is Internet Explorer first tab on opening will not work properly only on some computers.
As I suggested, please take a try to configure the homepage and see if there is any difference.
Further, you may take a try to reset Internet Explorer.
As issue only happens on some computers, you may also consider take use of process monitor and compare two traces on the good and the bad one.
Troubleshooting with Process Monitor
Best regards
Michael Shao
TechNet Community Support -
On a single Windows 2012 R2 server I have installed SQL 2012 and SharePoint 2013 SP1 with the latest update roll ups. When I remote desktop to the server using the farm and site collection admin account and open page http://server_name_here using
Internet Explorer, I'm able to see newsfeeds and document libraries.
If I connected to a separate Windows 7 machine as the farm and site collection admin account and open page http://server_name_here using Internet Explorer, I'm able to view the SharePoint pages except I cannot see any newsfeeds or document libraries.
There's just blank space where they should be. I have repeated this process on several other machines that are not the server and get the same result on every machine (I've tried other servers, desktops, adding the SharePoint site to the trusted sites list
in IE, even using firefox). I'm using the same account as I did when I logged onto the server directly. Any thoughts as to what's going on?
Thanks!Thanks for the idea, Harsh. What am I looking for?
It is currently set to the default of http://server_name and http://server_name:port_number (the latter is for Central Admin).
When I have access to the server, I have always done so the same way, using http://server_name. This was true when I access it from the desktop of the server itself and when I tried to access it from other desktops and servers (the machines where I had the
issues with the libraries and feeds not showing up). Are there other values I should add?
I have not tried to add http://server_FQDN as we don't plan on using that to access it but if you think it will help I would be happy to add it. -
I was setting up sharing & was trying to click on home sharing under the advanced tab and that item was not there. What can I do?
Hey hinge,
I found an article that goes over 8 troubleshooting steps to take if your Home Sharing isn't working. You can check them out here:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
I'd go through each one and check to see if that resolves the issue.
Regards,
David -
Adobe FlashPlayer paired with Internet Explorer 8 shows Plug-In version Not Installed?
Active X version is 11.7.700.202 I am being told that for a new program (Remedy) we are going to be using that the Plug-In version needs installed or the web-based application will not work. Is there any way to install the Plug-In version in addition to the Active X Version when paired with Internet Explorer?
You can download the plugin installer from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (under the heading Progress bar hangs...).
Maybe you are looking for
-
Hello. I have no Linux skills and looking for help with Android on the Toshiba Encore (WT8A). The Android 4.4 image (baytrail for ASUS T100) can boot Android on the Encore feels fast and smooth. Some things don't work so I made this post if someone
-
I am trying to import a date from a tiburon database. when I do an import with the date and time field the date gets imported as '11/20/0001 12:04:00 AM' the date and time field are different in the tiburon database so I join the two fields during my
-
Testing App Mod shows results, but none in page...
I created a VO that displays data (no where clause) and added it to the App Mod. Tested it and see all the data. Added the data control to my .jspx page as read-only table with 4 columns. Run the page and get 'No rows yet.' The credentials are in the
-
Anyone any ideas of how to fix this? It has only recently started happening and it is driving me nuts. Thanks for any help.
-
Hi All I need to supress few rows(records) in the query. I can do it with conditions, but using conditions the result row wont be supressed. The amount in the supressed row wud reflect in result. I, however dont want it to be reflected in the result.