Internet Explorer 11 Bad Request 400

I have looked at all the help online for this issue and I've tried them. However, it's not fixing the issue. I can only open up google, but if I go to any other site it always says bad request. How do I fix this?

Hi,
HTTP 400 bad request：It means the request can not be understood by web server because of malformed syntax.
What have you changed since you started getting the HTTP 400 error?
To narrow down the possibility, you can try using the onther broswers to check if this issue only occurs in IE.
Anyway, you can refer to the general fix for 400 error in the article below:
http://www.checkupdown.com/status/E400.html
Thanks!
Andy Altmann
TechNet Community Support

Similar Messages

CloudPageBlob.Create() Method throws StorageException - Bad Request 400

Hello,
I am working with Windows Azure Storage Client Library Version 3.0.2.0 and trying to create a CloudPageBlob.
when calling to CloudPageBlob.Create(long size) I get a Microsoft.WindowsAzure.Storage.StorageException with message :
"The remote server returned an error: (400) Bad Request."
I used fiddler to get the HTTP result and this is what I get:
<?xml version="1.0" encoding="utf-8"?><Error><Code>InvalidHeaderValue</Code><Message>The value for one of the HTTP headers is not in the correct format.
RequestId:9977d564-c5b2-4957-a64e-17a65ea7834c
Time:2014-02-05T18:05:35.8265038Z</Message><HeaderName>x-ms-blob-content-length</HeaderName><HeaderValue>22600</HeaderValue></Error>
The number is the value sent to CloudPageBlob.Create() Method.
my code looks like:
CloudPageBlob pageBlob = _BlobContainer.GetPageBlobReference(blobName);
var stream = new MemoryStream(streamBytes);
long messageSizeBytes = stream.Length;
pageBlob.Create(messageSizeBytes);
long offset = 0;
//writing to page blob in 4 KB chunks
while (offset < messageSizeBytes)
pageBlob.WritePagesAsync(stream, offset, null);
offset = offset + 4096;
Would be happy for any assistance.
Thanks.

Hi,
Are you running this in the Storage Emulator (locally)? If so, what version are you running? Storage Emulator 2.2 doesn't work against the version of the Client library you are running.
You probably need the
preview version of the Storage Emulator.
Edward

Internet Explorer behaves badly displaying WVC54GCA

Hi,
I have setup the above camera and sorted the IP thingie and even embedded it in my page (www.etherington.com/eggs).
In Firefox and various other browsers you get exactly what I was after - an embedded window in the page.
However on IE you'll see that it does not work
- you get this huge border and controls around the image
- you only see part of the image
I have tried several other forums but can't find anyone that can shed any light on how to solve this one.
Any suggestions welcome.
ta
Mike

Which version number of Internet Explorer you are using ?
Try downloading the IE v6 and check if it works for you...

MS Azure - Bad Request 400 Error

Hi,
I have this line of code which throws a MobileServiceInvalidOperation exception every time the line of code is executed:
List<Account> accounts = await App.accountTable.Where(account => account.EmailAddress == email).ToListAsync();
This is the exception:
A first chance exception of type 'Microsoft.WindowsAzure.MobileServices.MobileServiceInvalidOperationException' occurred in mscorlib.dll
Microsoft.WindowsAzure.MobileServices.MobileServiceInvalidOperationException: The request could not be completed. (Bad Request)
at Microsoft.WindowsAzure.MobileServices.MobileServiceHttpClient.<ThrowInvalidResponse>d__18.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Microsoft.WindowsAzure.MobileServices.MobileServiceHttpClient.<SendRequestAsync>d__1d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.WindowsAzure.MobileServices.MobileServiceHttpClient.<RequestAsync>d__4.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.WindowsAzure.MobileServices.MobileServiceTable.<ReadAsync>d__b.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.WindowsAzure.MobileServices.MobileServiceTable.<ReadAsync>d__4.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.WindowsAzure.MobileServices.Query.MobileServiceTableQueryProvider.<Execute>d__8`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.WindowsAzure.MobileServices.Query.MobileServiceTableQueryProvider.<Execute>d__3`1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at Microsoft.WindowsAzure.MobileServices.MobileServiceTableQuery`1.<ToListAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
at eventsphere.Utilities.ValidationUtility.<CheckEmailExistsError>d__2.MoveNext()
I have a very similar line of code shown below which works perfectly fine:
List<Account> accounts = await App.accountTable.Where(account => account.Username == username).ToListAsync();
I am a bit puzzled by how one gives an error and the other doesn't.
This is my Accounts table definition:
CREATE TABLE [eventsphere].[Accounts] (
[Id] NVARCHAR (128) DEFAULT (newid()) NOT NULL,
[AccountId] INT IDENTITY (1, 1) NOT NULL,
[Username] NVARCHAR (MAX) NULL,
[EmailAddress] NVARCHAR (MAX) NULL,
[Password] NVARCHAR (MAX) NULL,
[IsBusiness] BIT NOT NULL,
[User_Id] NVARCHAR (128) NULL,
[Business_Id] NVARCHAR (128) NULL,
[Version] ROWVERSION NOT NULL,
[CreatedAt] DATETIMEOFFSET (7) DEFAULT (sysutcdatetime()) NOT NULL,
[UpdatedAt] DATETIMEOFFSET (7) NULL,
[Deleted] BIT NOT NULL,
CONSTRAINT [PK_eventsphere.Accounts] PRIMARY KEY NONCLUSTERED ([Id] ASC),
CONSTRAINT [FK_eventsphere.Accounts_eventsphere.Businesses_Business_Id] FOREIGN KEY ([Business_Id]) REFERENCES [eventsphere].[Businesses] ([Id]),
CONSTRAINT [FK_eventsphere.Accounts_eventsphere.Users_User_Id] FOREIGN KEY ([User_Id]) REFERENCES [eventsphere].[Users] ([Id])
GO
CREATE CLUSTERED INDEX [IX_CreatedAt]
ON [eventsphere].[Accounts]([CreatedAt] ASC);
GO
CREATE NONCLUSTERED INDEX [IX_User_Id]
ON [eventsphere].[Accounts]([User_Id] ASC);
GO
CREATE NONCLUSTERED INDEX [IX_Business_Id]
ON [eventsphere].[Accounts]([Business_Id] ASC);
GO
CREATE TRIGGER [eventsphere].[TR_eventsphere_Accounts_InsertUpdateDelete] ON [eventsphere].[Accounts] AFTER INSERT, UPDATE, DELETE AS BEGIN UPDATE [eventsphere].[Accounts] SET [eventsphere].[Accounts].[UpdatedAt] = CONVERT(DATETIMEOFFSET, SYSUTCDATETIME())
FROM INSERTED WHERE inserted.[Id] = [eventsphere].[Accounts].[Id] END
This is the DataObject for the Accounts table:
namespace eventsphereService.DataObjects
public class Account : EntityData
[DatabaseGenerated(DatabaseGeneratedOption.Identity)]
public int AccountId { get; set; }
public string Username { get; set; }
[DataType(DataType.EmailAddress)]
public string EmailAddress { get; set; }
public string Password { get; set; }
public bool IsBusiness { get; set; }
public string User_Id { get; set; }
[DatabaseGenerated(DatabaseGeneratedOption.None)]
[ForeignKey("User_Id")]
[Association("UserIdAssociation", "UserId", "Id")]
[Column(Order = 1)]
public virtual User User { get; set; }
public string Business_Id { get; set; }
[DatabaseGenerated(DatabaseGeneratedOption.None)]
[ForeignKey("Business_Id")]
[Association("BusinessIdAssociation", "BusinessId", "Id")]
public virtual Business Business { get; set; }
Any input or advice would be appreciated.
Thanks in advance!

You would need to use Fiddler tool to analyze the request sent to the Mobile Services to ensure you are sending the right data.
Let me know if this helps in investigating this issue.
Abdulwahab Suleiman

Help! Bad Request 400

No matter what i try to watch, it doesnt work. I cannot watch youtube, movies, or the Keynote. Please could someone help me! I have uninstalled and reinstalled numerous times, and i also tried a new user but I as the same result.
So one please help. I'm not to smart with this so you have to help me through it!
Thank YOu

Ok...let's try a few things..
First...go and download the latest flash plug-in.
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
Second... Open the Quicktime systems Preference panel...go to advance...mime settings...scroll to the bottom of that list...Miscellaneous...uncheck flash media.

ESB Portal : The remote server returned an error: (400) Bad Request

Hi,
I am getting the below error message while trying to access ESB Portal:
========================
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 12/18/2013 12:07:10 PM
Event time (UTC): 12/18/2013 12:07:10 PM
Event ID: 2a429911fb69455ab3b77348c8b259ce
Event sequence: 10
Event occurrence: 2
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/ESB.Portal-1-130318418493427545
Trust level: Full
Application Virtual Path: /ESB.Portal
Application Path: C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\
Machine name: WIN-HG1MJEC7KJS
Process information:
Process ID: 3220
Process name: w3wp.exe
Account name: NT AUTHORITY\SYSTEM
Exception information:
Exception type: WebException
Exception message: The remote server returned an error: (400) Bad Request.
Request information:
Request URL: http://localhost/esb.portal/default.aspx
Request path: /esb.portal/default.aspx
User host address: ::1
User: WIN-HG1MJEC7KJS\ESBUser
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITY\SYSTEM
Thread information:
Thread ID: 4
Thread account name: NT AUTHORITY\SYSTEM
Is impersonating: False
Stack trace: at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
Custom event details:
====================
I also looked at thread : http://social.msdn.microsoft.com/Forums/en-US/1fb510a8-9f4b-4e1e-9261-3273b037786c/esbportal-bad-request-400?forum=biztalkesb
However didn't able to find the workaround for the same.
Best Regards,
Harkirat

Hi,
On a local server you don't have to change the web.config if you use local Windows Groups. Check if the User is added to the "BizTalk Server Administrators" Group. Also check if the Group or the User has rights to access EsbExceptionDb & ESBAdmin
database. You also have to enable "Windows Authentication" in IIS for the ESB.Portal.
Local Machine settings:
ESB.Exceptions.Service\Web.config
<connectionStrings><add providerName="System.Data.SqlClient" connectionString="Integrated Security=SSPI;Data Source=.;Initial Catalog=EsbExceptionDb" name="EsbExceptionDbConnectionString"/></connectionStrings>
C:\Projects\Microsoft.Practices.ESB\Source\Samples\Management Portal\ESB.Portal\Web.config
<connectionStrings>
<add name="AdminDatabaseServer" providerName="System.Data.SqlClient" connectionString="Network Library=dbmssocn;Data Source=(local);Integrated Security=True;Initial Catalog=ESBAdmin;"/>
</connectionStrings>
<authentication mode="Windows"/>
<authorization><allow roles="BizTalk Application Users"/>
<allow roles="BizTalk Server Administrators"/>
<allow roles="Administrators"/>
<deny users="*"/>
</authorization>
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly

Axis adapter : Bad Request error

Hi,
I have a File to SOAP scenario (PI 7.0) where I am using AXIS adapter in the receiver SOAP adapter for NTLM authorisation. In the xml that I am trying to post, i have characters like & because of which I am getting a Bad Request error. Is there a way to resolve this? thanks!
Regards
Pushpinder

In file sender channel, i am using binary mode, so no encoding specified.
I see the error in the receiver SOAP adapter -
Error Axis: error in invocation: (400)Bad Request
Error Exception caught by adapter framework: (400)Bad Request
Error MP: Exception caught with cause (400)Bad Request
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: (400)Bad Request: (400)Bad Request.
Error The message status set to NDLV.

HTTP 400 Bad Request when accessing Oracle XE/Apex from the Internet

I have Oracle Express Edition upgraded to Apex 3.2. I can access everything (SQL prompt, Apex HTTP) from my local machine. I have configured the server for remote access on a non-default (not 8080) port.
I have executed: exec dbms_xdb.setListenerLocalAccess(false);
I can access the server using:
http://coyote:9977/apex (brings me to Application Express Administration Services login screen)
(where "coyote" is the local machine name of my Windows Vista box, where the Oracle/Apex server is installed.)
But when I try:
http://internet_server_name:9977/apex
(where "internet_server_name" is the internet DNS name visible of my machine visible from the internet.)
I get "HTTP 400 Bad Request"
I know the request is hitting the Oracle Listener (getting through firewalls, cable modem router, etc) since the http attempt causes the entry:
20-MAR-2009 20:36:53 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=68.189.244.22)(PORT=52540)) * handoff * http * 0
to be made in the C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
An attempt using the local (Windows) machine name makes a similar entry in the listener log:
20-MAR-2009 20:47:35 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.7)(PORT=52811)) * handoff * http * 0
This seems like a security issue of some kind (is the server dropping a request from "outside" the local domain?)
I'm new to Oracle so I am not familiar with how to debug this sort of connectivity issue. In case it helps:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 20-MAR-2009 19:27:00
Uptime 0 days 1 hr. 30 min. 59 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=coyote)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=coyote)(PORT=9977))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
Any help appreciated,
john

Hans Forbrich wrote:
CoyoteTech wrote:
I have tried running with the firewall (F-Secure) completely disabled, but it made no difference. I do see the request hit the listener, and the handoff appears to be successful, but it goes silent from there. I also have a cable modem router that has the port forwarding set, but maybe there are other handoff ports besides the initial one (e.g. 8080) that need to be forwarded?Please also check the Windows firewall is off as well. Yes, Windows Firewall is disabled as well. See my previous post to Tyler - I'm pretty sure the reqwuest makes it through the firewall/router layer, since it causes an entry in Listener.log
Is your problem through the router only? In other words, if you try from a second machine that is on the same side as your XE, are you working OK? (My home ISP blocks a bunch of ports. Including SMTP, FTP, Telnet. And 8080 since that is a traditional default for many Java 'servers'.)
Yes, it appears to be related to a non-local IP address. I'm sure it makes it through the router - I also have several other ports that make it through (e.g. port 80).
I have poked around the DBMS_EPG docs, and ran a few of the commands there (list DADS etc). DBMS_EPG was first 'released' to us in 10gR2. As far as I'm concerned, XE is the public 'beta' or 'release candidate'. (This is supported by Oracle's docs that state that Apex using DBMS_EPG is first supported using 10.2.0.3 or 11g.) There are known bugs and there is no way to patch XE to fix them. However, I do not know whether you are hitting those bugs.
http://www.astral-consultancy.co.uk/cgi-bin/hunbug/doco.cgi?11410 provides some good notes.
Interesting. I will check out these docs later today.
>>
What happens when the listener hands off to a registered handler?
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/concepts.htm#i1049597 gives a good description.
Thanks.
How do I pick up the [log] trail from there?I'm thniking that the listener's log is still the primary way to go. You may need to increase the log or trace level. I have not investigated how to gen or access logs inside EPG.I tried Tyler's trace but did not seem to add additional info to the Listener.log.

Having constant 400 Bad request errors on Yahoo with Firefox 5.0 "optimized for Yahoo"

Every time I attempt to enter a news article on Yahoo's main page I get a "400 Bad Request" error. I have downloaded Firefox 5.0 "optimized for Yahoo" and that still did not solve the problem.
This ONLY occurs on Firefox. I also use Google Chrome and it has no such error problems. Neither does Internet Explorer which I RARELY use.
Please Identify the problem and solution.
I also have problems with Realplayer p[lug ins and Adobe Reader X

This problem is directly related to the way that Safari requires full header information and the way that the individual server concerned is set up to serve and deal with cookie setting; the longer the date set in the future for the cookie concerned, the more likely it is to provoke this error.
For instance http://www.digitaluk.co.uk/ has a Last visit cookie date set to 2999, but loads AOK in Safari 4.0.3, whereas virginmedia.com sets dates on some cookies well in excess of 2100 and unless one deletes those cookies that are beyond this centuries date for that site then their _sageamp and _camp cookies will provoke the kind of error being reported.
For what it's worth, I do not see the point of setting cookie dates for 2109, 2500 +, or much beyond a couple of years from now.
It would seem some regular organisations do see the point of doing that.
If you list the cookies in the Security/Show Cookies section of Safari preferences, you can see the likely offenders for the site provoking the error, once deleted they will be reset if needed in that session, often as not with newer , closer dates to today's date.

10gAS Portal and SSO issue, HTTP 400 Bad Request

New installation
10gAS Portal (9041)
Sun Solaris 9
Internet Explorer 6.0.28
After installation, I changed the mid-tier web cache listening port to 80 by following the instruction in OracleÂ® Application Server 10g Administrator's Guide:
http://download-east.oracle.com/docs/cd/B10464_05/core.904/b10376/ports.htm#sthref362
Now I am able to go to portal homepage with port 80:
http://<host-name>/pls/portal/
And when I click on the Login link, it correctly directs me to the SSO login page.
However, when I type in username and password, it returns HTTP 400 Bad Request error.
The weird thing is, if I enter the portal homepage URL again in the same browser, and click the login link again, I am logged in.
Any idea what might cause this issue?
Would re-register portal help?
Thanks,
Carol

The IIS settings probaly also need to get increased as well to accommodate the large number of groups.
I'll see if I can find a better link, but this should get it working.http://support.microsoft.com/kb/970875
Bump up the values, restart the box and see if this continues.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter: LinkedIn:
 Facebook:
 XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, Kedar

Hi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar

"The request failed with HTTP Status 400: Bad Request." when running reports

Hi,
I installed reporting services and the install went fine. The Reporting Services are located on a different server. I can see all the reports in SCCM but when I try to run them I get the "400" error with the following details:
System.Net.WebException
The request failed with HTTP status 400: Bad Request.
Stack Trace:
 at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
 at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
 at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.ReportExecutionService.LoadReport2(String Report, String HistoryID)
 at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.<>c__DisplayClass2.<LoadReport>b__0()
 at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
 at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
 at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
 at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
 at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I can open the URL from the SCCM server but when I select a report I am unable to select any report options if available. If no options are availble the report just doesn't run, I don't get and error if I select "View Report" mutiple
times.
If I connect to the Reporting Services site on the computer where it is installed all the reports run fine.
One thing I have noticed is that when I try to change or add a role assignment for Reporting Services the edited account always reverts back to the default settings and the added Domain user is dropped.
Thanks

I reviewed the topic and found a couple of steps I missed the first time around. I had to "Configure Reports to Use Report Builder 3.0 and setting the "Log on Locally" permission.
I then uninstalled the role and reinstalled it. I am still getting the 400 error.
When I inspected the SmsAdminUI.log I noticed the Error on the last line 2151811598 (it repeats in the log). I couldn't find anything specific related to it. By reading a few "related" Internet posts I came accross a intial setup
blog that noted some WMI firewall execptions (Async-in, DCOM-in and WMI-in) as require so I checked and they were not allowed on the SCCM server so I allowed them and tested with the same result. I turned them off again.
Here is the tail end of the SmsAdminUI.log
[19, PID:2684][01/24/2013 16:08:29] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[4, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[15, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[1, PID:2684][01/24/2013 19:06:02] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
 at System.Management.ManagementObject.Initialize(Boolean getObject)
 at System.Management.ManagementBaseObject.get_wbemObject()
 at System.Management.PropertyData.RefreshPropertyInfo()
 at System.Management.PropertyDataCollection.get_Item(String propertyName)
 at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
 at System.Management.ManagementBaseObject.get_Item(String propertyName)
 at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
[1, PID:2684][01/24/2013 23:39:14] :System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsCustomDialog.get_LocaleIndependentIdentifier()
 at Microsoft.ConfigurationManagement.AdminConsole.ShowDialogTaskHandler.DoTask(NavigationModelNodeBase node, SccmTaskConfiguration sccmTask, PropertyDataUpdated dataUpdatedDelegate, Boolean readOnly)\r\n
[1, PID:5008][01/25/2013 20:48:00] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
 at System.Management.ManagementObject.Initialize(Boolean getObject)
 at System.Management.ManagementBaseObject.get_wbemObject()
 at System.Management.PropertyData.RefreshPropertyInfo()
 at System.Management.PropertyDataCollection.get_Item(String propertyName)
 at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
 at System.Management.ManagementBaseObject.get_Item(String propertyName)
 at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n

XI's BC Adater (sender)-- 400 Bad Request

Hi,
I am trying to send data from SAP-BC to XI. XI will receive this data through XI's-BC Adapter(sender).
I have defined a routing rule in BC as specified in help.sap.com.
http://<hostname:50000/MessagingSystem/receive/BcAdapter/BC
When i test this Flowservice from BC End, i get 400 Bad Request error.
But when i specify the URL as http://hostname:50000 and test the service, the response code is 200 (success).
I even tested the URL directly posting in a explorer page and i could see that the message servlet pertaining to BC is active.
I am not able to understand why is XI-server not able to receive the request that has been posted to the URL
http://<hostname:50000/MessagingSystem/receive/BcAdapter/BC
Am i missing any configurations??
Regards,
siva Maranani

hi,
I was able to get the error details of "400:Bad Request."
The error is :
com.sap.aii.af.ra.ms.api.MessageFormatException: got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
org.xml.sax.SAXexception:got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
Below is the xmldata, that i am sent to XI:
<?xml version="1.0" encoding="iso-8859-1"?>
<sap:Envelope xmlns:sap="urn:sap-com:document:sap" version="1.0">
<sap:Header xmlns:rfcprop="urn:sap-com:document:sap:rfc:properties">
 <saptr:From xmlns:saptr="urn:sap-com:document:sap:transport">BC</saptr:From>
 <saptr:To xmlns:saptr="urn:sap-com:document:sap:transport">XI</saptr:To>
</sap:Header>
<sap:Body>
 <rfc:ZSIVAINSERT xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
 <CARRID>AA<CARRID>
 <CONNID>0017<CONNID/>
 <FLDATE>20040417<FLDATE/>
 </rfc:ZSIVAINSERT>
</sap:Body>
</sap:Envelope>
I do not understand the name/namespace it is looking for. Kindly help me out.
Regards,
Siva Maranani

Apache as reverse proxy - 400 Bad request

Hi all,
I'm configured apache as reverse proxy according to this blog:
The Reverse Proxy Series -- Part 3: Apache as a reverse-proxy
When I try to navigate http://testcomp/irj I get "400 - Bad request"
See exception;
Message : User Guest, IP address
Cannot parse the http request. Http error response [400 Bad Request] will be returned. Request is [Host: sapportal:50000
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, /
Accept-Language: en,he;q=0.5
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322; FDM; .NET CLR 2.0.50727)
Max-Forwards: 10
Via: 1.1 localhost
X-Forwarded-For: 10.0.0.4
X-Forwarded-Host: 10.0.0.6
X-Forwarded-Server: localhost
Connection: Keep-Alive
GET /irj HTTP/1.1
Host: sapportal:50000
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, /
Accept-Language: en,he;q=0.5
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0; .NET CLR 1.1.4322; FDM; .NET CLR 2.0.50727)
Max-Forwards: 10
Via: 1.1 localhost
X-Forwarded-For: 10.0.0.4
X-Forwarded-Host: 10.0.0.6
X-Forwarded-Server: localhost
Connection: Keep-Alive
com.sap.engine.services.httpserver.exceptions.HttpIllegalArgumentException: Incompatible field content in the MIME header.
 at com.sap.engine.services.httpserver.lib.headers.MimeHeaderField.parse(MimeHeaderField.java:364)
 at com.sap.engine.services.httpserver.lib.headers.MimeHeaders.init(MimeHeaders.java:504)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.initialize(RequestAnalizer.java:196)
 at com.sap.engine.services.httpserver.server.Client.initialize(Client.java:84)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:143)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Severity : Error
Category :
Location : com.sap.engine.services.httpserver
Application :
Thread : SAPEngine_Application_Thread[impl:3]_32
Datasource : 9332850:C:usrsapPD9JC00j2eeclusterserver0logdefaultTrace.trc
Message ID : 000C29EFE9A300570000002D00000B9000043A81D3311894
Source Name : com.sap.engine.services.httpserver
Argument Objs :
Arguments :
Dsr Component :
Dsr Transaction : 5359e85066e411dcbf6b000c29efe9a3
Dsr User :
Indent : 0
Level : 0
Message Code :
Message Type : 0
Relatives :
Resource Bundlename :
Session : 2
Source : com.sap.engine.services.httpserver
ThreadObject : SAPEngine_Application_Thread[impl:3]_32
Transaction :
User : Guest
The lines I added to http.conf
#Enable reverse-proxying
ProxyVia on
ProxyTimeout 600
#disable forward-proxying
ProxyRequests Off
#proxy /irj both ways
ProxyPass /irj http://sapportal:50000/irj
ProxyPassReverse /irj http://testcomp/irj
#proxy /logon both ways
ProxyPass /logon http://sapportal:50000/logon
ProxyPassReverse /logon http://testcomp/logon
I tried with apache version 2.2.3 & 2.0.59 with no success.
My J2EE/Portal version is 6.17.
Since this is a testing environment the two computers are under the same workgroup (no domain).
If I naviagte directly to the portal (without the reverse proxy) everything is working.
How can I solve it?
Regards,
Omri

Hi Jakub,
Thanks for the answer.
It's not working for me...
I'm attaching my httpd.conf file.
Also, what apache version do you use?
Can you send me your post your httpd.conf file?
Thanks,
Omri
httpd.conf
This is the main Apache HTTP server configuration file. It contains the
configuration directives that give the server its instructions.
See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
In particular, see
<URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
for a discussion of each configuration directive.
Do NOT simply read the instructions in here without understanding
what they do. They're here only as hints or reminders. If you are unsure
consult the online docs. You have been warned.
Configuration and logfile names: If the filenames you specify for many
of the server's control files begin with "/" (or "drive:/" for Win32), the
server will use that explicit path. If the filenames do not begin
with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
with ServerRoot set to "c:/apache" will be interpreted by the
server as "c:/apache/logs/foo.log".
NOTE: Where filenames are specified, you must use forward slashes
instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
If a drive letter is omitted, the drive on which Apache.exe is located
will be used by default. It is recommended that you always supply
an explicit drive letter in absolute paths, however, to avoid
confusion.
ThreadsPerChild: constant number of worker threads in the server process
MaxRequestsPerChild: maximum number of requests a server process serves
ThreadsPerChild 250
MaxRequestsPerChild 0
ServerRoot: The top of the directory tree under which the server's
configuration, error, and log files are kept.
Do not add a slash at the end of the directory path. If you point
ServerRoot at a non-local disk, be sure to point the LockFile directive
at a local disk. If you wish to share the same ServerRoot for multiple
httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "c:/apache"
Listen: Allows you to bind Apache to specific IP addresses and/or
ports, instead of the default. See also the <VirtualHost>
directive.
Change this to Listen on specific IP addresses as shown below to
prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
Listen 80
Dynamic Shared Object (DSO) Support
To be able to use the functionality of a module which was built as a DSO you
have to place corresponding `LoadModule' lines at this location so the
directives contained in it are actually available before they are used.
Statically compiled modules (those listed by `httpd -l') do not need
to be loaded here.
Example:
LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
'Main' server configuration
The directives in this section set up the values used by the 'main'
server, which responds to any requests that aren't handled by a
<VirtualHost> definition. These values also provide defaults for
any <VirtualHost> containers you may define later in the file.
All of these directives may appear inside <VirtualHost> containers,
in which case these default settings will be overridden for the
virtual host being defined.
ServerAdmin: Your address, where problems with the server should be
e-mailed. This address appears on some server-generated pages, such
as error documents. e.g. [email protected]
ServerAdmin @@ServerAdmin@@
ServerName gives the name and port that the server uses to identify itself.
This can often be determined automatically, but we recommend you specify
it explicitly to prevent problems during startup.
If your host doesn't have a registered DNS name, enter its IP address here.
ServerName localhost:80
DocumentRoot: The directory out of which you will serve your
documents. By default, all requests are taken from this directory, but
symbolic links and aliases may be used to point to other locations.
DocumentRoot "c:/apache/htdocs"
Each directory to which Apache has access can be configured with respect
to which services and features are allowed and/or disabled in that
directory (and its subdirectories).
First, we configure the "default" to be a very restrictive set of
features.
<Directory />
 Options FollowSymLinks
 AllowOverride None
 Order deny,allow
 Deny from all
 Satisfy all
</Directory>
Note that from this point forward you must specifically allow
particular features to be enabled - so if something's not working as
you might expect, make sure that you have specifically enabled it
below.
This should be changed to whatever you set DocumentRoot to.
<Directory "c:/apache/htdocs">
Possible values for the Options directive are "None", "All",
or any combination of:
Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
Note that "MultiViews" must be named explicitly --- "Options All"
doesn't give it to you.
The Options directive is both complicated and important. Please see
http://httpd.apache.org/docs/2.2/mod/core.html#options
for more information.
 Options Indexes FollowSymLinks
AllowOverride controls what directives may be placed in .htaccess files.
It can be "All", "None", or any combination of the keywords:
Options FileInfo AuthConfig Limit
 AllowOverride None
Controls who can get stuff from this server.
 Order allow,deny
 Allow from all
</Directory>
DirectoryIndex: sets the file that Apache will serve if a directory
is requested.
<IfModule dir_module>
 DirectoryIndex index.html
</IfModule>
The following lines prevent .htaccess and .htpasswd files from being
viewed by Web clients.
<FilesMatch "^\.ht">
 Order allow,deny
 Deny from all
</FilesMatch>
ErrorLog: The location of the error log file.
If you do not specify an ErrorLog directive within a <VirtualHost>
container, error messages relating to that virtual host will be
logged here. If you do define an error logfile for a <VirtualHost>
container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
LogLevel: Control the number of messages logged to the error_log.
Possible values include: debug, info, notice, warn, error, crit,
alert, emerg.
LogLevel warn
<IfModule log_config_module>
The following directives define some format nicknames for use with
a CustomLog directive (see below).
 LogFormat "%h %l %u %t \"%r\" %>s %b \"%You need to enable mod_logio.c to use %I and %Oi\" \"%{User-Agent}i\"" combined
 LogFormat "%h %l %u %t \"%r\" %>s %b" common
 <IfModule logio_module>
 LogFormat "%h %l %u %t \"%r\" %>s %b \"%i\" \"%{User-Agent}i\" %I %O" combinedio
 </IfModule>
The location and format of the access logfile (Common Logfile Format).
If you do not define any access logfiles within a <VirtualHost>
container, they will be logged here. Contrariwise, if you do
define per-<VirtualHost> access logfiles, transactions will be
logged therein and not in this file.
 CustomLog logs/access.log common
If you prefer a logfile with access, agent, and referer information
(Combined Logfile Format) you can use the following directive.
 #CustomLog logs/access.log combined
</IfModule>
<IfModule alias_module>
Redirect: Allows you to tell clients about documents that used to
exist in your server's namespace, but do not anymore. The client
will make a new request for the document at its new location.
Example:
Redirect permanent /foo http://www.example.com/bar
Alias: Maps web paths into filesystem paths and is used to
access content that does not live under the DocumentRoot.
Example:
Alias /webpath /full/filesystem/path
If you include a trailing / on /webpath then the server will
require it to be present in the URL. You will also likely
need to provide a <Directory> section to allow access to
the filesystem path.
ScriptAlias: This controls which directories contain server scripts.
ScriptAliases are essentially the same as Aliases, except that
documents in the target directory are treated as applications and
run by the server when requested rather than as documents sent to the
client. The same rules about trailing "/" apply to ScriptAlias
directives as to Alias.
 ScriptAlias /cgi-bin/ "c:/apache/cgi-bin/"
</IfModule>
"c:/apache/cgi-bin" should be changed to whatever your ScriptAliased
CGI directory exists, if you have that configured.
<Directory "c:/apache/cgi-bin">
 AllowOverride None
 Options None
 Order allow,deny
 Allow from all
</Directory>
Apache parses all CGI scripts for the shebang line by default.
This comment line, the first line of the script, consists of the symbols
pound (#) and exclamation followed by the path of the program that
can execute this specific script. For a perl script, with perl.exe in
the C:\Program Files\Perl directory, the shebang line should be:
 #!c:/program files/perl/perl
Note you mustnot_ indent the actual shebang line, and it must be the
first line of the file. Of course, CGI processing must be enabled by
the appropriate ScriptAlias or Options ExecCGI directives for the files
or directory in question.
However, Apache on Windows allows either the Unix behavior above, or can
use the Registry to match files by extention. The command to execute
a file of this type is retrieved from the registry by the same method as
the Windows Explorer would use to handle double-clicking on a file.
These script actions can be configured from the Windows Explorer View menu,
'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
button allows you to modify the Actions, of which Apache 1.3 attempts to
perform the 'Open' Action, and failing that it will try the shebang line.
This behavior is subject to change in Apache release 2.0.
Each mechanism has it's own specific security weaknesses, from the means
to run a program you didn't intend the website owner to invoke, and the
best method is a matter of great debate.
To enable the this Windows specific behavior (and therefore -disable- the
equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
The directive above can be placed in individual <Directory> blocks or the
.htaccess file, with either the 'registry' (Windows behavior) or 'script'
(Unix behavior) option, and will override this server default option.
DefaultType: the default MIME type the server will use for a document
if it cannot otherwise determine one, such as from filename extensions.
If your server contains mostly text or HTML documents, "text/plain" is
a good value. If most of your content is binary, such as applications
or images, you may want to use "application/octet-stream" instead to
keep browsers from trying to display binary files as though they are
text.
DefaultType text/plain
<IfModule mime_module>
TypesConfig points to the file containing the list of mappings from
filename extension to MIME-type.
 TypesConfig conf/mime.types
AddType allows you to add to or override the MIME configuration
file specified in TypesConfig for specific file types.
 #AddType application/x-gzip .tgz
AddEncoding allows you to have certain browsers uncompress
information on the fly. Note: Not all browsers support this.
 #AddEncoding x-compress .Z
 #AddEncoding x-gzip .gz .tgz
If the AddEncoding directives above are commented-out, then you
probably should define those extensions to indicate media types:
 AddType application/x-compress .Z
 AddType application/x-gzip .gz .tgz
AddHandler allows you to map certain file extensions to "handlers":
actions unrelated to filetype. These can be either built into the server
or added with the Action directive (see below)
To use CGI scripts outside of ScriptAliased directories:
(You will also need to add "ExecCGI" to the "Options" directive.)
 #AddHandler cgi-script .cgi
For type maps (negotiated resources):
 #AddHandler type-map var
Filters allow you to process content before it is sent to the client.
To parse .shtml files for server-side includes (SSI):
(You will also need to add "Includes" to the "Options" directive.)
 #AddType text/html .shtml
 #AddOutputFilter INCLUDES .shtml
</IfModule>
The mod_mime_magic module allows the server to use various hints from the
contents of the file itself to determine its type. The MIMEMagicFile
directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
Customizable error responses come in three flavors:
1) plain text 2) local redirects 3) external redirects
Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
EnableMMAP and EnableSendfile: On systems that support it,
memory-mapping or the sendfile syscall is used to deliver
files. This usually improves server performance, but must
be turned off when serving from networked-mounted
filesystems or if support for these functions is otherwise
broken on your system.
#EnableMMAP off
#EnableSendfile off
Supplemental configuration
The configuration files in the conf/extra/ directory can be
included to add extra features or to modify the default configuration of
the server, or you may simply copy their contents here and change as
necessary.
Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
Language settings
#Include conf/extra/httpd-languages.conf
User home directories
#Include conf/extra/httpd-userdir.conf
Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
Virtual hosts
#Include conf/extra/httpd-vhosts.conf
Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
Various default settings
#Include conf/extra/httpd-default.conf
Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
Note: The following must must be present to support
 starting without SSL on platforms with no /dev/random equivalent
 but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
ProxyPreserveHost On
ProxyVia on
ProxyTimeout 600
#disable forward-proxying
ProxyRequests Off
#proxy /irj both ways
ProxyPass /irj http://sapportal:50000/irj
ProxyPassReverse /irj http://sapportal:50000/irj
#ProxyPassReverse /irj http://testcomp/irj
#proxy /logon both ways
ProxyPass /logon http://sapportal:50000/logon
ProxyPassReverse /logon http://sapportal:50000/logon
#ProxyPassReverse /logon http://testcomp/logon

HTTP 400: BAD REQUEST IN WEBSTARTERAPPII

Hi All;
When accessing the WebStarterAppII on Oracle 10g Apps Server using the link "http://server:port/wsa2", after logging in using index.jsp, the "The page cannot be found" page is displayed along with the message "HTTP 400 - Bad Request" on the explorer's title bar.
However, at that step if I manually write
"http://server:port/wsa2/browseDirectory.do" on the address bar, I can see the browseDirectory page and continue us
ing the WebStarterAppII. I debugged the code to see if it is really forwarding to the "/browseDirectory.do", I've seen in the strutsconfig.xml under logon action, the forward path is correct (forsuccess, /browseDirectory.do) and I debugged the logonAction.java, putting the
line "debug(returnForward.getPath());" to see if it is actually forwarding to "/browseDirectory.do" and the answer is 'yes'.
Thanks for youn kind help,
ÃzgÃ¼r
It is really annoying as I cannot figure out what is wrong, everything seems OK except the "Bad Request" page

Hi CB,
Cause
The 400 Bad Request error is an HTTP status code that means that the request you sent to the website server (i.e. a request to load a web page) was somehow malformed therefore the server was unable to understand or process the request.
Resolution
The most common reason for a 400 Bad Request error is because the URL was typed wrong or the link that was clicked on points to a URL with some kind of mistake in it.
Though it's rare, the 400 Bad Request error could be an issue with the web site's server (mainly with the actual website name) that your users are trying to access.
So in your Portal URL Iview, try to give the full URL with the actual website name (meaning the Portal Server name etc with port settings).
Hope that helps.
Ray

Internet Explorer 11 Bad Request 400

Similar Messages

Maybe you are looking for