Internet Explorer 11 Failing Acid3 Test 63/100

Contrary to claims on Wikipedia that IE11 passes Acid3 with 100/100, I only scored a 63/100 with my IE11 with a 'FAIL' above the shadowey logo. (I can't put a picture until my account is verified.)
 https://social.technet.microsoft.com/Forums/getfile/641536

Hi Person in need of help.
sorry its a bit hard to understand your question?
this forums for
Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
raise a question, it's highly recommended you head on over to http://answers.microsoft.com/en-us
Please include links to any websites you are having problems with your questions.
f12>Emulation tab, make sure the site is using Edge mode.
you can see up-to-date status information about MSIE browsers at
http://status.modern.ie
Regards.
Rob^_^

Similar Messages

  • Multiple instances of Internet Explorer in task manager using 100,000 KB+ memory

    Hi! I recently got a virus on my computer that causes multiple instances of explorer.exe and iexplorer.exe to appear in my processes tab of task manager. Over the course of about a minute, the memory usage of each begins to climb rapidly until all of my
    memory is being used by these. These do not appear in my applications, nor do they actually open up an internet explorer window. When I end task on them, another one appears about a minute later to take its place and do the same thing again. Additionally,
    when I click shut down to turn my computer off, various advertisements flash on my screen for a few seconds before the computer begins to shut down. When the computer is started up, a window appears for a split second that contains only blackness. I have never
    seen this window appear before the virus was obtained. When I end task on all my explorer.exe and iexplorer.exe applications at the same time, my desktop vanishes, but it also stops those applications from reappearing.  This virus has caused my computer
    to run unbearably slow. I have tried Spybot S&D, Exterminateit, AVG, Roadkill, and other methods and nothing seems to detect this or cure it. I am not that good with computers, but I am dying for help on the matter! If you can assist, please let me know
    what I can do with detailed instructions for my sake! Thank you!!!!!!

    See and follow Andy's excellent advices.
    In addition...
    See: "How to
    Reset Internet Explorer settings".
    If the issue persists...
    1. Please download and run the
    Microsoft Safety Scanner tool (freeware).
    2. Reboot your PC.
    3. Please download and update Malwarebytes Anti-Malware Free
    4. Reboot Windows in
    Safe Mode and run a Full Scan with Malwarebytes Anti-Malware.
    5. Download and Run AdwCleaner (Freeware)
    6. Reboot and Test.
    Best of Luck,
    Vincenzo Di Russo
    Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
    Moderator in the Microsoft Community and TechNet Forums
    My MVP Profile

  • Close Internet Explorer (Failed Download)

    I have tried multiple times to install Adobe Flash Player. The program initializes and I allow it. When trying to download it asks me to close Internet Explorer. After closing Internet Explorer, I hit Retry, but the same messages re-appears. I don't understand why I keep getting that message after I've already exited out of Internet Explorer... the program will not let me continue.

    How to close Internet Explorer and other programs running on Windows?

  • Internet Explorer Fail caused by Jinitiator 1.3.1.24

    Anyone have exprience of following errors from Internet Explorer 8.
    SysFader: iexplore.exe - Application Error
    The instruction at 0x0cdcc228 referenced memory at 0x0cdcc28. The memory could not be "Written".
    I just buy a Dell notebook (E5400) and installed the Jinitiator for Discoverer Plus. We have both java versions to support oracle financial application and discoverer plus.
    For financial application, we use Java 6 version 15
    For Discoverer plus, we use Jinitiator 1.3.1.24
    OS = XP Professional Service Pack 3
    The financial application is running smoothly. We don't know why when I selected the discoverer responsibility from IE menu and the errors will be displayed after new window pop up.
    Hope someone can tell us the solution.
    Thanks in advance.
    Sammy

    Dear Hussein,
    Thank you for your reply. Our application release is 11i. I have try to downgrade the browser from IE8 to IE7 yesterday, and got the same problem. After reviewed you provided the blog information, my configuration should not have any problems. The console log does not found anything, because the problem happened at start moments.
    I have some information retrieve from internet and said that these problems are caused by Display Device. The display device are not compatible with Jinitiator. I don't whether true or not.
    Best Regards,
    Sammy
    Edited by: user12203010 on 2009年11月11日 下午6:06

  • HP Laserjet P1102w - Right side margin cut off when printing in Internet Explorer 9! URGENT PROBLEM*

    Hi,
    I have just purchased a new printer (HP Laserjet P1102W), and when I print a web page in Internet Explorer 9, the footer (I set to the URL) does not print at all and the header will print though the right hand edge of my entire web page is cut off (including my top right header - Pages ? of ?).
    I always use Print Preview first, and in the print preview it looks perfect. I always tick the box to enable shrink to fit too. Why will it look perfect in 'Print Preview' but yet when it prints, it cuts off the right hand side edge of the page and doesnt print the footer?? I have tried adjusting margins, etc... all to no avail.
    I would like to check whether others have this same problem?
    I spoke to HP (UK Printer Support) and they said it is Internet Explorer 9's problem. I have left a message on the Microsodt Web forum which you can see here. http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista/internet-exploer-9-not-printing-header...
    I am hoping they may release a patch / hotfix - but this has to be affecting many other users of this printer too? The more of us that complain, the quicker it will get sorted.
    Any others with the same problem?
    Thanks.

    I spoke with Microsoft technical support via phone today. Between us - we seemed to have found the problem.
    It's to do with the DPI (the font size) settings in Windows!?
    I have mine set to 188% on my Windows Vista mahcine and 200% on my Windows 7 laptop.
    From my Printing tests in Internet Explorer 9...
    at 100 % DPI – it prints perfectly
    at 150% DPI – it prints perfectly
    at 200% DPI – the right side of the margin is cut off, and no footer is printed – despite it looking perfect in the Print Preview.
    I am using http://uk.msn.com/ as my test print outs.
    This indicates when the DPI is changed above 150%, IE9 doesn't print properly – though other browsers like Safari or Firefox do print correctly. This surely has to indicate a bug in either the Windows operating system or Internet Explorer 9?
    Microsoft are going to run their own tests and phone me back tomorrow...hopefully with a solution!
    Hope this helps any others with the same problem at the moment!
    Would be great if HP could provide a soloution asap - surely a tweak to the Printer dirvers will fix the problem?

  • Opening Teststand XML file in Internet Explorer

    I have TestStand 4.1 installed on my PC.
    The test station PC has TestStand 4.0 installed.
    When I open the XML report file in Internet Explorer on my PC, I just get run-on text.
    What am I doing wrong?

    What do you mean with "run-on text"?
    If you refer to the XML content (including the tags, "raw XML"), then the Internet Explorer fails to display the content of the XML using the style sheet.
    Another option is that you configured the Internet Explorer to always display the raw content instead of using the style sheet.
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Opening XML files In Internet Explorer Using WebLogic

    Hi,
    i am developing a web application which runs under web logic. When a link is clicked to open a new browser window which will contain an XML file there are no problems using Firefox, however when i do the same in IE, a new window opens but it remains blank, not showing any XML content.
    Any ideas why this could be happening?
    Thanks

    What do you mean with "run-on text"?
    If you refer to the XML content (including the tags, "raw XML"), then the Internet Explorer fails to display the content of the XML using the style sheet.
    Another option is that you configured the Internet Explorer to always display the raw content instead of using the style sheet.
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Internet Explorer 11 has stopped working in windows 8.1.

    Every time I use Internet Explorer 11 it stops working. Then wants to shut down. It is getting more frequent.  Used to be a couple of websites but it is now all the time. 

    Assuming Win8.1 64-bit...
    Please answer each of the following [admittedly tedious] diagnostic questions in a correspondingly-numbered list in your very next reply, preferably
    without quoting this post:
    1a. When (approx. date) did you purchase the computer?
    1b. Did the computer come with Win8 (or Win8.1) preinstalled, did you do a clean install of Win8 (or Win8.1), or did you upgrade a (e.g., Win7) computer to Win8?
    1c. Assuming you started with Win8 => When (approx. date) was Win8.1 installed?
    2. What is the full name of your currently-installed third-party anti-virus application or security suite (i.e.,
    not Windows Defender!), if any, and when (approx. date) does your current subscription
    (if any) expire?
    3. What third-party anti-malware applications (i.e., not Windows Defender!) are installed, if any?  What third-party firewall, if any?
    4. Has a(nother) Norton application or a McAfee application EVER been installed on the computer since you bought it?
    5. Did a Norton free-trial or a McAfee free-trial [pick one] come preinstalled on the computer
    when you bought it? (Doesn't matter if you never used or Activated it.)
    6a. Is KB2977629, KB2988948, KB2977765; KB2976897, KB2993651, KB2918614, and/or KB2978668 listed in
    Installed Updates (not Update History)? [1]
    6b. When (exact date) was KB2919355 installed according to Installed Updates?
    7a. What Update Version & KB number are displayed in the second line of text in IE11's Help | About [Alt+H+A] tab; e.g.,
    Update Version: 11.0.54 (KB1231231) ?
    7b. Is Firefox, Chrome or any other alternate browser installed?
    8. Is Adobe Flash Player v15.0.0.167 for Internet Explorer installed? TEST HERE USING INTERNET EXPLORER
    ONLY! =>
    http://www.adobe.com/software/flash/about/
    9. Are you in the habit of using "Registry cleaners" (e.g., Registry Mechanic; System Mechanic; RegCure; RegClean Pro; Advanced SystemCare; Registry Booster; McAfee QuickClean; Glary Utilities; AVG PC TuneUp; Norton Registry Cleaner; PCTools
    Optimiser; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner; Advanced System Optimizer; CCleaner's
    Registry Cleaner component)?
    =======================================================
    [1] Control Panel | Programs and Features | View installed updates (in left-hand menu)
    ~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

  • Flash Player 9 + Firefox / Internet Explorer and Proxyserver Settings inside the Browser

    Dear Adobe,
    according to this document from your Website:
    http://www.adobe.com/devnet/flashcom/articles/firewalls_proxy04.html
    which says:
    "When running within a browser, Macromedia Flash Player uses
    the browser's HTTP services to communicate through RTMPT. Since
    browsers also support SSL, why not add in support for secure
    encrypted HTTPS tunneling? That is exactly what Macromedia did. You
    can request an HTTPS tunnel using a third protocol: RTMPS."
    it should be so, that the Flash Player (up to the latest
    release) that for the RTMPT mode the player should use the http
    methods of the browser.
    Using the http methods of the browser means, that it should
    honour also the Proxy Server Settings of the Browser (it doesn't
    matter if that is firefox or internet explorer).
    We tested that with our own application, but it looks like,
    that flash player in rtmtp net connection mode doesn't honour the
    browser settings or using the http browser methods.
    It looks more like that, that it creates a self made tcp
    socket connection to the fms server, which is correct when you are
    not using rtmpt, but according to your documentation, it's not.
    Please advice me, how to reach a FMS via a simple (i.e.
    Squid) Proxy on port (i.e.) 8080 which is being set in the browsers
    settings.
    And I don't think the Flash Player is just for private
    customers who are using the internet without any proxies.
    Thank you very much in advance for your help and your
    answers...
    If you don't want to reveal the secret, please write me via
    my personal email which you can get from my profile.
    Thx,
    Stephan

    quote:
    Originally posted by:
    Erik Engineer
    I am also hoping they correct the check for MMX back into
    Flash player (and it would really be nice if they have a non-MMX
    supported code path too). Perhaps I should pull the ActiveX module
    up in a debugger and look for a non-MMX code path and see if I can
    patch one to work.
    I thought of "back-reving" to the latest Flash 7 player to
    see if the issue goes away but I have yet to do that.
    Good luck looking for a non-MMX code path hidden upstream of
    the offending MMX instruction.
    Going back to Flash 7 is relatively easy and you will
    suddenly be able to visit places you haven't been in years, but
    there are still some sites that will block you unless you have
    Flash player 8 or 9.
    First use the Adobe uninstaller to clean up which is found
    at .
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14157
    Then find a copy of :
    flashplayer7r61_winax.exe
    and run it. That will give you the latest Flash 7.

  • My website looks different in internet explorer.

    Greetings and thanks in advance for great service that we provide
    I created a website in iweb www.webworldpr.com in Firefox looks good in Internet Explorer looks different. I can do. I would like to know is web site maestro can solve this problem.

    The iWeb for Musicians website is optimized with Web SIte Maestro and appears to work OK in IE 7 & 8. If I look at it using Safari User Agent the background image drops out etc.
    The latest version of WebCrusher has this....
    "iWeb websites are known for their incompatibility with Internet Explorer. We tested hundreds of iWeb sites and came up with a step by step guide to making your iWeb site work with Internet Explorerand built this functionality into WebCrusher."
    I do have WebCrusher but I haven't tested this feature as I don't have a PC running WIndows anymore.
    The only way I can think that I could help you out here is if you send me a copy of a Domain file or the folder of published files and I'll run it through the app to see if it fixes your problem before you have to think about buying it.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Windows failed to apply the Internet Explorer Zonemapping settings - the data was invald (event ID: 1085)

    Hi All,
    I have a large domain and a long list of websites that are trusted using the following group policy setting:
    Administrative Templates > Windows Components > Internet Explorer> Internet Control Panel > Security Page >
    Site to Zone Assignment List
    On all (XP/vista/win7) workstations across the domain I'm getting the following error:
    Log Name:  System
    Source:  Microsoft-Windows-GroupPolicy
    Event ID: 1085
    Task Category: None
    Level: Warning
    Keywords:   Description: Windows failed to apply the Internet Explorer Zonemapping settings. Internet Explorer Zonemapping settings might have its own log file.
    There's nothing either side of this error in the log that shines any more light on the issue.
    I know which group policy object its applying these settings but cant find which of the entries in the site to zone assignment list is causing this issue. I looked in the
    Group Policy/Operational log but all I see is the following entry which says "completed" but is logged as an error:
    After some research I'm guessing that the issue is an incorrect wild-card. This is what my trusted sites list looks like (with names removed of course):
    http://servername.*  
    *.internaldomain.com.au  
    *.domain.com.au  
    *.domain.*  
    *.externaldomain.com  
    *.domain.inernaldomain.com.au  
    *.domain.*  
    *.domain/name.*  
    *.domain.inernaldomain.au*  
    *.domain.com
    Is there something obviously incorrect here?
    Does anyone know where I could find an article that clearly outlines the acceptable wildcard syntax for the
    "Security page\ site to zone assignment list" group policy?  Ive read every forum post, website and blog I could find on the internet but nothing is clear and I wasn't able to find an MS document that steps it out. I've also changed the
    existing list a number of times based on blog posts etc but had no luck.
    **Please Note**
    I dont want to change to a different method or have an intellectual debate re why I would have these sites/wildacrd/policy set. I'm really looking to see what entry is invalid and where the documentation is for this policy setting so i can make sure they are
    always correct in the future. 
    thanks in advance for your time and assistance
    Simone
    PS: I've already read the following posts a number of times:
    I get no data but have identified the GP that is causing the issue:
    A test case for troubleshooting group policy application – Event ID 1085 and 7016 - http://blogs.technet.com/b/askds/archive/2008/08/21/a-test-case-for-troubleshooting-group-policy-application-event-id-1085-and-7016.aspx 
    I dont have any 2 letter domain names:
    Problems Adding Top-Level Domains to Zone Sites List - http://support.microsoft.com/kb/259493
    I tried formatting the list per this article:
    [Solved] The Group Policy client-side extension Internet Explorer Zonemapping failed to execute  - http://daily-it.blogspot.com.au/2008/09/solved-group-policy-client-side.html
    Has no domain wildcard format info:
    Behavior of Site to Zone Assignment List  - http://blogcastrepository.com/blogs/mattbro/archive/2006/09/07/2183.aspx
    Great article, no wildcard data:
    Internet Explorer Policy Settings  - http://technet.microsoft.com/en-us/library/bb457144.aspx
    Internet zonemapping problem: http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/a8756a27-b562-42ad-8782-87d284e6bcfb/
    Spiceworks Event 1085 (Warning) - http://community.spiceworks.com/windows_event/show/1582-microsoft-windows-grouppolicy-1085
    Event ID 1085 — Application of Group Policy - http://technet.microsoft.com/en-us/library/cc727303%28v=ws.10%29.aspx
    Application of group policy - http://technet.microsoft.com/en-us/library/cc727312%28v=ws.10%29.aspx
    Evt ID 1085 GP client-side extension IE ZoneMapping failed to exec  - http://www.winvistatips.com/evt-id-1085-gp-client-side-extension-ie-zonemapping-failed-exec-t706399.html
    Event 1085 - Internet Explorer Zonemapping - http://www.minasi.com/forum/topic.asp?TOPIC_ID=29206
    EventID.net - http://www.eventid.net/display.asp?eventid=1085&eventno=1412&source=Userenv&phase=1
    Event ID 1085 - Internet Explorer Zonemapping failed to execute - http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/2003_Server/Q_24897522.html
    UPDATE:
    I disabled the original policy and created a new one with only one trusted site address in it. Then I logged into a clean test machine did some testing.What I found after a few hours of testing was; regardless of the site that I have listed in group policy
    The HKCU\Software\Policies\Microsoft\Current version\Internet Settings\Zone Map Key registry entry is
    always updated with that entry on the workstation. So the workstation's registry always updates the key with
    *.sitename.com per the site that I have set in GP
    If I run GPUPDATE /FORCE over and over again, on the same machine, under the same user account, using the same DC I get:
    Failure, Failure, Failure, Success, Success, Success, Failure etc
    I wasn't able to determine any pattern to the failures, I tried stopping some of the processes on that machine but didn't find anything that would make it fail/succeed reliably.
    There is no AV or firewalls installed on my test machine
    Anyone have any more ideas?  I think I might install filemon and try to capture some more data unless there's a better tool?

    Yes, and that's straight from my Microsoft TAM. As long as you include an asterisk inside those site-to-zone mappings, you'll continue to see them. The key is whether or not they're working. In my environment, I've seen complete success using the
    http://*.domain.com, or
    https://*.domain.com, no matter if the site is http://www.domain.com or
    http://milk.does.a.body.good.domain.com. Despite the success, we continue to see the errors. It's much the same as Group Policy Preferences where you can apply a setting once, or repeatedly. If you apply
    something repeatedly and it's already set, lookout for some complaints in the application log. It really is annoying. There's potential to play with the logging levels, but I'll admit that my experience ranks as "novice" in this specific section of group policy.
    This link might get the creative juices flowing:
    http://blogs.technet.com/b/askds/archive/2008/07/18/enabling-group-policy-preferences-debug-logging-using-the-rsat.aspx
    I see you've already read a number of articles including "a test case for troubleshooting those event IDs"... I sympathize with your efforts. I despise warnings and errors that I can't solve or don't want to see, but I've researched a number of them to death
    and found that many are simply "normal". Uggg... I hope this helps, but please take my advice, as with anyone else's out here, with caution. I've seen some crazy recommendations. I saw a recommendation to install SQL on a DHCP server to get failover clustering
    up and running. I hope the guy asking for help didn't listen to that one! : ) - josh

  • "Open method of Workbooks class failed" when opening Excel file via Internet Explorer

    (apologies, I posted this first to the general Office 2010 forum, but then realized this was probably a better spot to post)
    We have an Excel COM add-in installed on users' PCs.  This add-in responds to workbook open events by opening a particular XLA file (also deployed to the PC) to make certain features available.  This process works flawlessly when Excel files are
    opened locally - but when a user attempts to open an Excel file from an IE link, we get the following error: "Open method of Workbooks class failed".  This is happening on the line that is trying to open the XLA file.  This only happens
    when launching an Excel link from IE - works fine in Chrome or Firefox.
    I have found several posts on this topic, but no solutions:
    1. This post (https://social.msdn.microsoft.com/forums/office/en-US/73c96005-84af-4648-b103-32b677205be3/open-method-of-workbooks-class-failed)
    is the closest to our problem.  In this case, the "answer" was that the user may not have access to the 2nd workbook being opened.  But in our case, we're opening an XLA that is on the local machine, and I've confirmed that it is not
    corrupt and accessible (read & write, just in case!) to Everyone.
    2. This (very old) post (http://www.pcreview.co.uk/forums/open-method-workbooks-fails-excel-hosted-ie-t965608.html)
    seems similar, but is talking about opening Excel inside of IE.  This is not what we're doing - the link is supposed to (and does) open Excel outside of IE.  Interestingly, Excel.exe is being launched with the "-embedded" flag, even
    though it isn't running in the IE window.  When launching Excel by opening the file locally, Excel.exe is run with the "/dde" flag instead.  Clearly the "-embedded" mode is what is causing the problem.  I could change the
    links on the web page to use some JavaScript to open Excel differently... unfortunately, the links are actually generated by SharePoint (the Excel files are in a SP repository), so this is not really an option.
    3. This Microsoft KB article (http://support.microsoft.com/kb/268016) talks about problems opening an XLA directly from IE... but this is the case of a link pointing
    directly to an XLA file, not opening a regular workbook that in turn opens an XLA, as is my case.  In fact, this article specifically points out in the "More Information" section that "End users do not normally open XLAs; instead they open
    an XLS that (if needed) loads one or more XLAs during startup." ==> precisely what I'm trying to do that is giving me the error!
    I've replicated the situation with a very simple COM add-in (created in VS2010 using VB.Net) and a very simple XLA file (does nothing, just pops up a message in auto_open).  For anyone wanting to try it out, here is the exact test case:
    1. In Excel, create a simple XLA file containing only the following code, and save it in C:\TEMP\dummy.xla:
    Sub Auto_Open()
    MsgBox "Auto Open fired"
    End Sub
    2. In Visual Studio, create a new Excel 2010 Add-In.  I created mine via Visual Basic, but I doubt the choice of language matters.  Place the following code in ThisAddin.vb:
    Public Class ThisAddIn
    Private Sub ThisAddIn_Startup(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Startup
    AddHandler Me.Application.WorkbookOpen, AddressOf Application_WorkbookOpen
    End Sub
    Private Sub ThisAddIn_Shutdown(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Shutdown
    End Sub
    Sub Application_WorkbookOpen(ByVal workbook As Excel.Workbook)
    On Error GoTo ErrHandler
    If (Not workbook.Name.Contains("dummy.xla")) Then
    MsgBox("Workbook open")
    Application.Workbooks.Open("C:\temp\dummy.xla")
    Application.Workbooks("dummy.xla").RunAutoMacros(Excel.XlRunAutoMacro.xlAutoOpen)
    End If
    Exit Sub
    ErrHandler:
    MsgBox(Err.Description)
    End Sub
    End Class
    3. Build & publish this add-in and install it on the same machine as the XLA created in step 1.
    4. Create and save an empty Excel workbook (I called mine WayneTest1.xlsx) - save it locally (on your desktop), and put a copy somewhere on your web server (I put mine directly in c:\inetpub).
    5. Create an HTML file with a link to that workbook, saving it to the same web server location - here is mine:
    <html>
    <body>
    <a href="WayneTest1.xlsx">Link to Excel file</a>
    </body>
    </html>
    6. Double click the workbook on your desktop (from step 4) - opens fine, I get the "workbook open" message, following by the "Auto Open fired" message.
    7. In Internet Explorer, navigate to the HTML file specified in step 5 and click on the link - when prompted, select "Open" - I get the "workbook open" message, following by the error message "Open method of Workbooks class failed".
    Here are a few things I've ruled out / tried so far:
    - Unchecked all the "Protected View" settings in Excel, made no difference
    - Unchecked all the "File block settings" in Excel, made no difference
    - Made sure dummy.xla was open for read & write to Everyone
    - Made sure the web page was in Trusted sites and set the security level to Low for those sites in IE
    - Tried making the local desktop file (step 6) readonly, made no difference (i.e. launching it locally still worked fine)
    - Tried using Excel 2013 - made no difference
    Any ideas / suggestions?

    Hello Wayne,
    Apologies for the delay.
    I went through your post and tried to reproduce the issue. I was able to reproduce it. Based
    on its complexity and as it requires more in-depth analysis, your question falls into the paid support category which requires a more in-depth level of support.
    Please visit the below link to see the various paid support options that are
    available to better meet your needs. http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Thanks,
    Anush

  • Applet failed to load in Internet Explorer when using JRE 1.5 update 5

    I have downloaded JRE 1.5 Update 5 and checked the relevant checkbox in Internet Explorer Advanced tab to use JRE 1.5 for applets. Did the same in Java Control Panel. However none of the applets seem to load.
    For example I went to this site:
    http://java.com/en/download/help/testvm.xml
    The applet didn't load and I got the following error in my Sun Java Console :
    load: class JavaVersionDisplayApplet.class not found.
    java.lang.ClassNotFoundException: JavaVersionDisplayApplet.class
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         ... 10 more

    And it's the same behaviour in JRE 1.5 update 8 as well.

  • How can I test websites I'm making in for Internet Explorer

    Hi,
    Is there good way to test websites I'm making in Internet Explorer? I know about sites like http://ipinfo.info/netrenderer/ , but as far as I know, that only works when it's online and you give it the link. What about while you're still developing it and it's not online yet? I do have Windows on my iMac via Bootcamp, but I can't be switching back and forth 100 times a day as I look at it and come back and edit it! lol
    Is there any easy way? Or should I just buy some cheap PC?
    Thanks!

    I know VMware Fusion let's you run your Bootcamp partition as a virtual machine and I'm pretty sure that Parallels supports that also (have only used Fusion). With your bootcamp partition running as a virtual machine it runs side by side with Mac OS. You would set the virtual machine up to use either bridged (peer of Mac) or NAT (kind of hides behind Mac) networking.
    To make your life easier you would probably put an entry in your \Windows\System32\Drivers\etc\hosts file with your Mac's IP address and the name of site you're trying to connect to.
    I've been running Windows VMs for a little over 3 years and the whole setup works pretty great.

  • Mea Culpa - Internet Explorer now renders my iWeb 2 test site correctly?

    After umpteen server tweaks I finally got my iWeb 2 test site uploaded
    http://www.mjweber.com/mjwredsite/mjweber/welcome.html
    It displayed as designed in Safari on my MBP. I then fired up XP in Parallels and loaded the site in Internet Explorer. I didn't expect it to work but it did. Now I'm really stymied!
    I've had numerous compatibility issues with iWeb 2 and IE in the past week paralleled here by hundreds of other posts here. Now, when I finally upload the site, it suddenly works?
    Either the Internet gods are playing with me or the IE incompatibility stems from launching a published iWeb 2 folder from a local XP hard drive. That's where my navigation menus didn't display. What else can I say? I'm going to have a drink.
    I'd appreciate independent site validations by anyone not using Safari or OS X... Linux, Unix, Windows, Netscape, IE, etc. Thanks!
    http://www.mjweber.com/mjwredsite/mjweber/welcome.html

    Hi thanks for the advice, the text is centred vertically , left aligned and there is plenty of space at the end. I will try increasing width/height but not sure if that will help as box is already much bigger than text.
    In fact it works perfectly on another web page ...thats what surprising ....even the html for the two pages is identical from what we can see!
    Take a look at
    www.cibsys.com/cibsys1/index.html on the UK site and run down the various pages on the left side to see what happens (if you have IE on a PC). On the PC on some pages perhaps 30% eg workflow services the menu on the left fails to draw correctly leaving the text un readable.
    Thanks

Maybe you are looking for