Internet Explorer 11 not available in WSUS/SCCM 2012

Hi all,
do you have any idea why Internet Explorer 11 is not available in WSUS or SCCM 2012.
I would like to deploy it as an update and not as an application.
I have IE 10 listed and also Cumulative Updates for IE 11.
Is it not yet released for SCCM Deployment?
Thank you
Best regards

some history..
-=-=-
http://support.microsoft.com/kb/2921911
Internet Explorer 10 for Windows 7 and Windows Server 2008 R2 (KB2718695) Tuesday, October 8, 2013, ◦Metadata has changed.
[no note of change to release channel, but I think this is when it appeared in WSUS]
Internet Explorer 10 for Windows 7 and Windows Server 2008 R2 (KB2718695) Tuesday, March 26, 2013, Localization text changed.
Internet Explorer 10 for Windows 7 and Windows Server 2008 R2 (KB2718695) Tuesday, March 12, 2013, Deployment: Catalog, Classification: High Priority, Non-Security, Update Rollups
Internet Explorer 10 for Windows 7 and Windows Server 2008 R2 (KB2718695) Tuesday, March 12, 2013, Deployment: Important/Automatic Updates, Classification: High Priority, Non-Security, Update Rollups
Internet Explorer 10 for Windows 7 and Windows Server 2008 R2 (KB2718695) Tuesday, March 12, 2013, Deployment: Optional/Automatic Updates, Classification: Updates, Non-Security
Internet Explorer 10 for Windows 7 and Windows Server 2008 R2 (KB2718695) Tuesday, March 12, 2013, Deployment: Optional/Automatic Updates and Catalog, Classification: Updates, Non-Security
-=-=-
http://support.microsoft.com/kb/2662694
Windows Internet Explorer 9 for Windows 7, Windows Server 2008 R2, Windows Server 2008 and Windows Vista (KB982861) Tuesday, June 21, 2011, Metadata changed to offer to WSUS channel.
Internet Explorer 9 for Windows 7, Windows Server 2008 R2, Windows Server 2008 and Windows Vista (KB982861) Monday, March 28, 2011, Deployment: Windows Update, Microsoft Update, and Important/Automatic Updates, Classification: High Priority, Non-Security,
Update Rollups
Internet Explorer 9 for Windows 7, Windows Server 2008 R2, Windows Server 2008 and Windows Vista (KB982861) Monday, March 28, 2011, Deployment: Windows Update, Microsoft Update, and Optional Installation, Classification: Non-Security, Updates
Internet Explorer 9 for Windows 7, Windows Server 2008 R2, Windows Server 2008 and Windows Vista (KB982861) Monday, March 28, 2011, Deployment: Catalog, Classification: Non-Security, Update Rollups
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

Internet Explorer Upgrade 7 to 8~~~SCCM 2012

Hi Guys,
I want to upgrade IE 7 to 8 in XP machine using SCCM 2012.
I try to push updates but not got success. Plz suggest

Adding more info:
Using Software Distribution Tools to Install Internet Explorer 8
http://technet.microsoft.com/en-us/library/cc985331.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Software metering date not available for selection sccm 2012

Hi
I have installed SCCM 2012.
While viewing a report for software metering date and year are not available for selection. they are blank.

thaks
I is showing after restart.
Now there is another problem.
When I see the software metering report for enabled rule i.e. KasperskyAdminKit I can not understand the figures
Computers that have run a specific metered software program
NetBIOS Name
Installed Site Code
Last Usage
Total Usages
Average Usages per Day
Total Duration (min)
Average Duration of Use (min)
Average Duration per Day (min)
WIL-WNR-AV
PUN
11/16/2012 5:13:35 PM
1
0.03
7384.27
7384.27
246.14
How to know the the explanations for the underlined items ?

FDF file opening in Internet Explorer--not in Adobe Acrobat Professional XI

Good morning!
I have created a form in Acrobat Professional XI and have a submit button that emails that data back as an .fdf file. This is working as it should.
However, on some of the returned emails, the .fdf file is opening in Internet Explorer--not in the associated file in Acrobat Professional XI.
Is this the default? Is there a way that I can specify that it always opens in Acrobat?
I looked on line, and found where you have to associate that type of file with Acrobat
I have Windows XP
in My Computer--in Tools, Folder Options, File Types, I have where FDF files are associated with Adobe Acrobat.
Are there other changes that need to be made?
We have a work-around--we can import the file data into the form--just takes a little longer.
I tested this before I posted the form online, and it worked perfect. Now that it is online, we are seeing some snags...
As always--Thank you for your help!

Thank you for your quick response!
no--it is an fdf file. Has an .fdf extension.
One difference that I have noticed that the file that is opening correctly (in acrobat) was sent from a gmail account. The file that is opening in internet explorer was filled out in Adobe Reader XI from an outlook email.
This is the window that appears when the file is opened.
On the Tools--the only items that are accessible from this screen is the AddOnTools--not all the tools sets.
Any assistance would be greatly appreciated!

When viewing outlook emails in firefox, links open in internet explorer, not in firefox

when viewing my outlook emails in firefox, when I click on a link the new webpage is opened in internet explorer not in firefox

Thank you - that has solved the problem - links simply open in a new tab in firefox.
Marvellous.

I cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

i cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

Could you post an example of the filter message?
This article has more information on the filters built in to Firefox: [http://www.mozilla.org/en-US/firefox/phishing-protection/ Firefox Phishing and Malware Protection].
It's possible that you also have a Firefox add-on, or external software, that is filtering what you see. However, we don't have enough information to help identify it yet. If you want to review a list of your add-ons, you can find them under: Help > Troubleshooting Information.

I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not > 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

I have photoshop element 11.0 but it's no possible installation (after change pc) because message internet explorer not > 4.0. I have IE 11.0 ??? If enregistrement my N° on CD are not valid ???

Counting class of period work schedule not available on 01.01.2012

HI SAP GURUS,
while creating attendance through info type 2002 for an employee its giving error message i.e " counting class of period work schedule 03/KGPG not available on 01.01.2012. Please suggest.

Check out this link in the IMG:
IMG > Time Management > Time Data Recording and Administration > Attendances/Actual Working Times > Attendance Counting > Define Counting Classes for the Period Work Schedule
Under the PSG Grouping 03, and PWS KGPG, maintain the value = 1 (or other class as required).
If you do not find the entry, you need to create a new record.
Also, under the Counting rule (that you assign to your attendance) make sure that the appropriate Counting class for PWS is checked mark otherwise your attendance will not be counted properly. You can create the couting rule with this IMG step:
IMG > Time Management > Time Data Recording and Administration > Attendances/Actual Working Times > Attendance Counting > Rules for Attendance Counting (New) > Define Counting Rules
Regards,
Harshal

Internet Explorer not recording scores for SCORMS

I am having a problem with Internet Explorer not recording the scores for SCORMS developped in Captivate 7. A Forum in Moodle suggested that the problem is that Internet Explorer always has an error with the instruction DoBeforeUnload. I can see that this is always causing a problem. Do you have any suggestions or work arounds for this?

I am using Captivate 7 to produce the SCORMS, and the courses are hosted in MOODLE 2.5. The scores are recorded well in google Chrome but not in Internet Explorer. I have been trying out the courses with Internet Explorer 10 and 11 and both produce the same error:
A moodle forum suggested that IE10 and IE11 do not like the command DoBeforeUnload, and need the command BeforeUnload. (I have checked the Moodle SCORM API and the commands and scores are being sent.)

Verizon 9100EM Router ISP Protocol Internet address not available

My Verizon 9100em router (FIOS) has been working fine with 5 wifi attached devices. After unplugging my router for 20 seconds all my devices reconnected to the router without issue; however, none could access the internet. I accessed my router Admin page via 192.168.1.1 and found this device status: WAN device: auto protocol detect warning (WAN device not connected); ISP Protocol Internet address not available.
I performed the router reboot procedure. This did not establish the connection. I unplugged the router for 60 mins, no help. I left the router powered up for 8 hours and rechecked the cable connection from the router to the wall, but the ISP Protocol Internet address is still not available.
Are there any other steps I can perform, short of performing the factory reset? I did not make any router configuration changes since the initial setup years ago, so I don't see why a reset would be necessary.

I want to thank you all for your helpful responses to my inquiry. I am happy to report that my problem was resolved during an "online chat" with Verizon support.
They were able to run a line diagnostic and a line reset procedure which re-established my router connection. The technician was unable to explain why
the router lost it's ip address and was unable to re-establish connectivity with the ISP. I assume there was an issue with the DHCP service and it did not recognize my router.

Your workout data could not be sent...an Internet connection not available

(Also posted on the nikeplus forum: http://forums.nike.com/message.jspa?messageID=238734#238734)
I am trying to sync my workout data for the first time on iTunes....so far unsuccessfully.
I have just one workout in my latest workouts folder.
When trying to sync the iPod I get the following message:
"Your workout data could not be sent to nikeplus.com because an Internet connection is not available.
Make sure your network connection is active and try again."
There is also no button labeled "Visit nikeplus.com." below the "Automatically send workout data to nikeplus.com" checkbox in the Nike + iPod tab.
I am running the latest version of iTunes (8.0.2.20) on Windows XP and the latest firmware for my 1st gen iPod Nano (1.3.1). I am using just the basic Nike+ sport kit.
There is definitely no problem with my Internet connection. I can connect to the iTunes store. I have disabled my firewall to see if that was getting in the way. Nothing changed. Still the same message.
Does anyone have a solution for this please?

I contacted Apple support at 1-800-275-2273 for technical assistance. They sent me to level 2 support - product specialist for Ipod Nano with Nike+. They have not seen this issue before and they will need to contact me back, I should have an answer back by Thursday.

SMS Provider Locations Do Not Match - Problem installing SCCM 2012 R2 CU4

I have an SCCM 2012R2 CU1 site that has been upgraded from SCCM 2012 non-SP1, so I have gone from 2012 to 2012SP1 through CU5 and then to R2 and then to CU1.
Over the course of the life of this site, which has more than 10k clients and 10 Site Systems, we have installed roles, removed roles, moved roles and removed Site Systems.
I have also installed and removed SMS providers . . . which is where my issues begin.
The site properties in the console list 6 SMS Providers and even lists an SMS provider on a server that was retired and is no longer a Site System. When I query WMI using the following VBS script it only returns the *ACTUAL* SMS Provider locations,
2 of the 6 listed in the GUI.
On Error Resume Next
Const ForReading = 1, ForWriting = 2, ForAppending = 8
strComputer = "."
Set oFS = CreateObject("Scripting.FileSystemObject")
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\sms")
If Err.Number <> 0 Then
WScript.Echo "Cannot connect to WMI"
WScript.Echo vbTab & "Error " & Err.Number & " - " & Err.Description
End If
Set oLog = oFS.OpenTextFile("C:\Temp\SMS_ProvList.log",ForAppending, True)
If Err.Number <> 0 Then
WScript.Echo "Could not create output file"
WScript.Echo vbTab & "Error " & Err.Number & " - " & Err.Description
End If
Set colItems = objWMIService.ExecQuery("SELECT * FROM SMS_ProviderLocation",,48)
count = 0
For Each objItem in colItems
count = count + 1
oLog.WriteLine "-----------------------------------"
oLog.WriteLine Now()
oLog.WriteLine "Provider instance " & count & " : " & objItem.Machine
oLog.WriteLine "NamespacePath : " & objItem.NamespacePath
oLog.WriteLine ""
Next
I have a test environment which has also gone through some growth over its lifetime and has had the same changes to SMS Providers made. When I first attempted to install SCCM 2012 R2 CU4 in this test environment the installer continually failed the
prerequisite checker when querying the CU level of the SMS Providers. The only way that I could get past that issue was by running a site maintenance task via the CM installer and installing an SMS Provider at the location that had previously been an
SMS Provider but I had uninstalled that role.
I do not want to have to do that in my production environment, and would not even be able to do so if I wanted as I have retired one of the servers listed and cannot re-provision that machine.
Any CM12 gurus out there with suggestions? This strikes me as a standard MS problem when having multiple development teams working on a product/update and not having a standard location to check for configuration information (This is exactly the problem
when configuring DNS suffixes via GPO and not manually setting the GUI to match).
Thanks!
Josh Gerner
Cornell University.

The issue I have is that I cannot find the WMI class that holds the SMS Providers that are returned by the GUI.
I actually engaged MS Premier for a SCCM 2012 RAAS about 2 years ago and that was when the discrepancy first reared it's head. The support person that I worked with couldn't give me a way of cleaning those entries at that point which is when I started
logging the locations to be sure that my maintenance task was really installing or removing the SMS Providers.
Josh Gerner

PDF reader in Internet Explorer not working

Hi All,
I am having some issues with one of our computers. When we try to open a PDF document from within Internet Explorer it only gives me the option to download the file and open it with the Adobe Reader Application. I have verified that I have the check box for the reader checked under the Intenet section of preferences. I have uninstalled and reinstalled and this does not change. This is causing an issue with one of our web applications that generates PDFs and is quite annoying. I have tried using a different profile and I do not have the issue on that profile. However, rebuilding the profile for this user would be very painful due to all of the custom settings that are in place and I would only like to do that as a last resort.
Cheers!

Check to see if the Microsoft download left a Microsoft JVM installed or checked preference. Tools menu > internet options > advanced tab > look for any checked boxes in the Microsoft JVM section. Your Java 2 v1.4.2 checkbox should be near this. Restart.

I suddenly cannot startup Captivate 4 for reason Flash Player for Internet Explorer not installed or older version, but I have verified that Flash Player 16,0,0,235 is installed. Please help.

Hi,
I haven't used my Adobe Captivate 4 for a bit, but when I try to start it up, I get the following message:
"The Flash Player for Microsoft Internet Explorer, is not installed or its an older version.
You will automatically be redirected to the Adobe website to download the latest Flash Player.
Please note that the Adobe Captivate cannot be used until the Flash Player is installed."
Even if I click the OK button and reinstall the Flash Player, I still get the same message, when I try to startup Captivate.
I have verified that I'm running Flash player 16,0,0,235, which is supposed to be the latest version.
I'm running Windows 7 and Internet Explorer 11.
Please help.

The problem is that your version of Captivate 4 needs to be updated with a patch that Adobe used to supply. (I don't have a link anymore to it.)
Captivate 4 was unable to recognise Flash Player versions beyond a certain number. It gives you a misleading error message that makes it look like you have the wrong version of Flash Player. But the real problem is that Captivate needs to be patched to recognise the latest FP versions.
I'm hoping that someone from the Adobe Captivate team will chime in here and give us another link to download the patch. Otherwise, you really might be forced to upgrade to a newer version of Cp. However, if your current projects are being built in Cp4, your next issue will be that if you purchase Cp8 it will NOT be able to upgrade your Cp4 projects. You'd need to download a trial version of Cp5 or 5.5, and do a two-step upgrade.

Internet exploring not running in window 8

I keep a message saying I am not running Internet Explorer in Windows 8 and and that I need to install flash player. When I try to install it ,I get another message saying it is intergrated with windows 8

http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

Internet Explorer 11 not available in WSUS/SCCM 2012

Similar Messages

Maybe you are looking for