Internet explorer hangs and loads webpages slow

Internet explorer 11 loads webpages slow and frequently hangs on the page and I have to select recover webpage. Please advise what I can do to resolve this.
Regards.

Hello , I understand that your desktop computer loads web pages slowly, and frequently hangs on the page. I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Resolving issues in Internet Explorer (Windows 8). This should help to open up, and brows web pages without frequently hanging up or performing slowly. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Similar Messages

Version 3.6.6 and Internet explorer will not load sites, so I reloaded the older 3.6.3 of firefox and websites load fine. Internet Explorer still will not load. The error message corresponding with 3.6.6 was that there were problems with the proxy serve

Upgraded to 3.6.6 and no sites loaded, error in proxy server. Internet explorer will not load either. Reloaded firefox 3.6.3 and sites load fine, but internet explorer still will not load. I was only able to connect to yahoo messenger when websites were not loading.
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.6

I have a problem with Firefox loading. It will not load and it says Firefox is using a proxy that refuses connection. Check with your network administrator. How do I get Firefox to work. I've uninstalled it and reinstalled it twice. Any help would be great thanks.

Has anyone seen the following on their WP? Message from webpage WARNING: Time Warner Cable Customer – Your Internet Explorer browser and computer may be compromised by security threats. Call 844-600-6224 now for IMMEDIATE assistance. OK

Has anyone seen the following on their WP?
Message from webpage
WARNING: Time Warner Cable Customer –
Your Internet Explorer browser and
computer may be compromised by
security threats. Call 844-600-6224 now for
IMMEDIATE assistance.
OK

This sounds like a virus or malware program that has made its way onto your computer. I would ensure you have the latest virus definitions on your computer and run a thorough (complete) scan of your system. If this doesn't work, I would suggest you use Microsoft's Malware Removal Tool. You can download it at the link below. Hope this helps.
http://www.microsoft.com/security/pc-security/malware-removal.aspx

Windows 8 and Internet Explorer 10 - down load error

I have brand new computer with WIN 8 and IE 10.
Trying to download CS5 form Adobe using My order history.
But it errors and says I have to old of Internet Explorer version and says I need to use the latest version.
But I have it so.... Does that mean IE 10 is not uspported by Adobe?
Thanks
Rob

This is a known issue. Simply use another browser... There's so many of them...
Mylenium

WRT300N v1 Internet Explorer cannot display the webpage

An intermittent problem occurs where occasionally during browsing the web I'll get an Internet Explorer "cannot display the webpage" and then I reload the page and often it works on the reload. The problem is very frequent and so nearly every webpage I try to open I have to reload in order to access it.
A temporary fix is unplugging the WRT300N v1 and plugging it back in. For a while, it works fine, but eventually the problem creeps up again.
I have firmware v 1.03.3
I've got two laptops, one Mac running OS 10.x and one Dell running Vista. I also have a desktop PC running XP. The two laptops use the wireless connection. The PC uses a wired connection. All 3 computers experience this same problem browsing web pages.
I've read the forums and mostly I've seen people talking about problems with the WRT300N v1 as far as the wireless connection, but this time I'm having issues even with the wired connection, so I feel that this issue isn't addressed, or at least I haven't found where it was addressed.
How do I fix this issue permanently?

I too am having the same problem. I used another system with IE7 installed and found that many sites that were "unable to be displayed" were accessed with IE7 on a differant computer system running Windows XP.
I realize it could be a router thing as well....but after i went through all the tech help i could find online it still did not solve the problem. I decided to work it out myself.
I found my solution when trying to go to sites with mp3 files on them. Thats when i discovered that with Windows Vista I had to manually select what program applications would be used to perform IE7 features (webpage content) in order for the pages to load properly.
To do this in Windows Vista - just go to Start / Program Defaults / Set Program Access and defaults From there you can select which programs to open if IE7 cant handle the file extention on its on. That was my problem all along.
You may have to go as far as setting your file associations in Windows Explorer. Windows Vista had set the file extension .php to open with Windows Photo Gallery.
I am still going through all the file types and finding file extentions that are configured wrong within Windows Vista.
UPDATE: I had problems opening webpages from links from online searches that were within various forums and also on websites that required a login but popup a separate window to login to. I don't know if you have the same problem with these sites.
I uninstalled a Windows Update (kb927143) and can now access those. I know this could be risky but I still have my firewall and antivirus running. Until IE7 is fixed its the only choice I have.
To do this in Vista....go to Control Panel ... Programs and Features...then click view installed updates. You will find it there if you have it installed. From there you can uninstall it.
Hope this helps you to solve your problem.
Message Edited by nannahawktx on 08-27-2007 09:02 PM

ACE 4710 - Internet Explorer cannot display the webpage randomly

We have a ACE 4710 with a basic config, (see below).
When clicking on a tab from a window within Interent explorer we occasionally get an issue with it returning: "Internet Explorer cannot display the webpage" The details show "Access is denied" accessing a particular line of a javascript file.
We have put one web server out of service in the farm to make sure that this isn't a result of stickyness not quite working.
We have tested extensively by going directly to the web server directly without the load balancer and cannot reproduce the problem but we can produce the issue within a few minutes when going to the load balanced address.
Thanks in advance for any advice.
HOST-1/Admin# show run
Generating configuration....
logging enable
logging fastpath
logging standby
logging timestamp
logging trap 6
logging history 6
resource-class SLB_ResourceClass_T_R
limit-resource all minimum 10.00 maximum unlimited
resource-class sticky
limit-resource all minimum 10.00 maximum unlimited
boot system image:c4710ace-t1k9-mz.A5_1_2.bin
peer hostname HOST-2
hostname HOST-1
interface gigabitEthernet 1/1
switchport access vlan 1000
no shutdown
interface gigabitEthernet 1/2
shutdown
interface gigabitEthernet 1/3
description LB003
switchport access vlan 1
shutdown
interface gigabitEthernet 1/4
description LB004
switchport access vlan 2
shutdown
interface port-channel 1
port-channel load-balance src-dst-port
no shutdown
clock timezone standard GMT
switch-mode
context Admin
description SUTLB01
member SLB_ResourceClass_T_R
access-list ALL line 8 extended permit ip any any
access-list ALL line 16 extended permit icmp any any
access-list everyone line 8 extended permit ip any any
access-list everyone line 16 extended permit icmp any any
probe tcp probe_tcp_80
port 80
rserver host Server_S_W301
description Server_S_W301
ip address x.x.32.152
inservice
rserver host Server_S_W302
description Server_S_W302
ip address x.x.32.154
inservice
serverfarm host sfarm_T_R
description sfarm_T_R
predictor leastconns
probe probe_tcp_80
rserver Server_S_W301 80
rserver Server_S_W302 80
    inservice
sticky http-cookie Cookie1 T_R_sticky_cookie
cookie insert browser-expire
timeout 3600
serverfarm sfarm_T_R
class-map match-any T_R_L4Class
2 match virtual-address x.x.33.150 tcp eq www
class-map type management match-any remote_access
2 match protocol xml-https any
3 match protocol icmp any
4 match protocol telnet any
5 match protocol ssh any
6 match protocol http any
7 match protocol https any
8 match protocol snmp any
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
policy-map type loadbalance first-match T_R_L7policy
class class-default
    sticky-serverfarm T_R_sticky_cookie
policy-map multi-match T_R_L4Policy
class T_R_L4Class
    loadbalance vip inservice
    loadbalance policy T_R_L7policy
    loadbalance vip icmp-reply active
    nat dynamic 2 vlan 1000
interface vlan 1000
ip address x.x.33.148 255.255.254.0
access-group input ALL
nat-pool 2 x.x.33.151 x.x.33.151 netmask 255.255.254.0 pat
service-policy input remote_mgmt_allow_policy
service-policy input T_R_L4Policy
no shutdown
ip route 0.0.0.0 0.0.0.0 x.x.32.1
ssh key rsa 1024 force

+------------------------------------------+
+-------------- HTTP statistics -----------+
+------------------------------------------+
LB parse result msgs sent : 421347     , TCP data msgs sent       : 2099597
Inspect parse result msgs : 0          , SSL data msgs sent       : 0
                      sent
TCP fin msgs sent         : 6169       , TCP rst msgs sent:       : 769
Bounced fin msgs sent     : 5          , Bounced rst msgs sent:   : 1
SSL fin msgs sent         : 0          , SSL rst msgs sent:       : 0
Drain msgs sent           : 337811     , Particles read           : 5040829
Reuse msgs sent           : 0          , HTTP requests            : 342499
Reproxied requests        : 183422     , Headers removed          : 37475
Headers inserted          : 342124     , HTTP redirects           : 0
HTTP chunks               : 224859     , Pipelined requests       : 71466
HTTP unproxy conns        : 267246     , Pipeline flushes         : 0
Whitespace appends        : 0          , Second pass parsing      : 0
Response entries recycled : 71302      , Analysis errors          : 0
Header insert errors      : 22         , Max parselen errors      : 215
Static parse errors       : 99         , Resource errors          : 0
Invalid path errors       : 0          , Bad HTTP version errors : 0
Headers rewritten         : 0          , Header rewrite errors    : 0
SSL headers inserted      : 0          , SSL header insert errors : 0
SSL spoof headers deleted : 0         , Unproxy msgs sent         : 267246
HTTP passthrough stat     : 0
NOTE - We did turn on caching at one point to try and resolve the issue but it has since been turned off

Accessing https url EBS R12.1.3 leads to "Internet Explorer cannot display the webpage"

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S:Solaris SPARC 64 bits
I.E Browser: 9.0
Problem Description
Cloned target database TEST1 from source database TEST2 RMAN full backup. But on accessing https url EBS R12.1.3 leads to "Internet Explorer cannot display the webpage"?
Autoconfig completes successfully on both DB and Apps Tier and have also ran ojspcompile but still the same issue.
$ perl ojspCompile.pl --compile --flush -p 2
logfile set: /t000/test1/inst/apps/TEST1_Hostname/logs/appl/rgf/ojsp/ojsp
starting...(compiling all)
using 10i internal ojsp ver: 10
synchronizing dependency file:
loading deplist...8095
enumerating jsps...8095
updating dependency...0
initializing compilation:
eliminating children...6024 (-2071)
translating and compiling:
translating jsps...6024/6024 in 7m50s
compiling jsps...6024/6024 in 35m17s
Finished!
Bounced the services there after still the same issue. Could anyone please share the fix if encountered such an issue before.
Thanks for your time,
user10088255

Apache logs have the below entry:
[Sun Oct 27 02:30:11 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 02:30:11 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 03:03:02 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 03:03:02 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:04:59 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:04:59 2013] [notice] Accept mutex: fcntl (Default: fcntl)
[Sun Oct 27 04:29:54 2013] [notice] configured -- resuming normal operations
[Sun Oct 27 04:29:54 2013] [notice] Accept mutex: fcntl (Default: fcntl)

Update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow.

update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow. Most infuriating is that YouTube was deleted from my entertainment apps and I now have to pay for it if I want it back!! This is a bloody disgrace.

Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Internet explorer will not load

my internet explorer will not load, i just get a spinning beachball and could anyone have any suggestions as my dvd i purchased mastering os x panther requires ie. thank you gb foley.
emac Mac OS X (10.3.9)

Just use a different browser. Are the files on the DVD just HTML files? If so, then right click on the HTMl file (Control-Click if you don't have a two button mouse) and pick Open With... and point it to another browser. Firefox, Camino (what I currently use), Opera, etc.
Patrick

Internet Explorer cannot display the webpage error urgent!

Hi,
I have created a OAF page. am displaying some report data in the page. The VO query is executing more thatn 20 min to get the records after tuning.
Now my problem is, am getting the error "Internet Explorer cannot display the webpage" in 10 mins after the VO query execution started. However, the DB session for this query is still executing at the backend and I am unable to get the same OAF page until the DB session completes.
Could you please help me in this?
Thanks,
Raja.

Raja,
There are two options here :
1) The correct one is to go via concurrent program , because as per web standards a web page should not take max of 3-4 minutes to render.
2) If you still wanna go via your present approach, you need to set profile ICX:Session Timeout which specifies Maximum idle time for the Oracle Applications user session(specified in minutes).
--Mukul

Reporting IAC - Internet Explorer cannot display the webpage error

Hello
We are working on ECC 6, EHP 3, MSS Reports using LaunchPad.
When we try to see the report results, it gives us following error at below URL:
http://domain.com:50000/irj/servlet/prt/portal/prteventname/navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.sap.pct%2Fline_manager%2Fcom.sap.pct.erp.mss.bp_folder%2Fcom.sap.pct.erp.mss.roles%2Fcom.sap.pct.erp.mss.manager_self_service%2Fcom.sap.pct.mss.hcm.rpt.iac&ApplicationParameter=S%3DMSS0%26F%3D*HISRETQTA++5%26B%3D20100329%26E%3D20100329%26V%5B1%5D%3DMSS_RPT_SEL_PD1%26OV%3DMSS_RPT_SEL_PD%26R%3D4365AF4B40472508E10000000A000326&CurrentWindowId=WID1269788098656&NavMode=1
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
- I am connected to Net very well.
- Not sure abt website problems
- address shown in the address bar is mentioned above
Any idea what is wrong? We were earlier getting IAC exception, and added the permissions to overcome it.
Reagrds
Yash

HI Yash,
Please follow this link http://help.sap.com/saphelp_erp2004/helpdata/en/0c/c28c4024d26e1de10000000a1550b0/frameset.htm.
It will solve your problem. Also make sure that you will give READ access to the end user on this folder.
In case you are still facing with issue, do let us know.
Cheers,
AB

Periodic Internet Explorer cannot display the webpage

while navigating in Apex users occasionally (and more frequently now) are getting "Internet Explorer cannot display the webpage" errors. if they click on refresh or back then click again it works.
i cannot find any errors in any log files that give me any indication why this is happening.
any help is appreciated.
using
Oracle Application Server 10g Release 2 (10.1.2)
and
Application Express 4.0.1.00.03
with
Oracle Database 10.2.0
on
Linux spedb01.spep.com 2.6.9-89.0.26.ELhugemem #1 SMP Sun May 30 09:43:09 EDT 2010 i686 i686 i386 GNU/Linux
Edited by: user12021582 on Dec 20, 2010 3:42 PM

Have not heard of this one. Would consider setting IE "Delete browser history on exit" if you have not already. And setting "Check for newer versions of stored pages" to every time I visit the webpage.

My internet explorer is not loading any web pages.

My internet explorer is not loading any web pages. Other browser rather than IE is working fine. Tried with reseting but it didn't work. Can anyone help me for this.Thanks

Hi,
Have you tried to open Interent Explorer (No Add-ons), how is the result?
Please refer to this tutorial to troubleshoot:
"Internet Explorer cannot display the webpage" error
http://support.microsoft.com/kb/956196
In addition, Did you configure any proxy ever?
Karen Hu
TechNet Community Support

Export to Excel Fails with "Internet Explorer cannot display the webpage"

We have a couple of report servers all hosted internally on VMs. They are all SSRS 2008 R2.
For all of these, when viewing the reports remotely in IE, they run fine. However when we try to export them to excel, a new tab opens in IE, but the tab just displays with "Internet Explorer cannot display the webpage"
There are no other errors and it never progresses to save or open.
THE SSRS log files dont contain any errors either so i dont think its a resource issue, but they do say steam=''
library!ReportServer_0-1!11cc!03/11/2014-08:49:24:: i INFO: RenderForNewSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:49:27:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:49:31:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:49:44:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:49:45:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:05:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!18d0!03/11/2014-08:51:06:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!18d0!03/11/2014-08:51:07:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!7a0!03/11/2014-08:51:34:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!1610!03/11/2014-08:51:38:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!1610!03/11/2014-08:51:39:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!624!03/11/2014-08:51:49:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11d4!03/11/2014-08:52:14:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch()
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
library!WindowsService_0!3c8!03/11/2014-08:52:28:: i INFO: Call to CleanBatch() ends
library!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: RenderFromSession('/ReportsMain/Test/Production Report')
webserver!ReportServer_0-1!11cc!03/11/2014-08:55:29:: i INFO: Processed report. Report='/ReportsMain/Test/Production Report', Stream=''
Does anyone have any suggestions?

Hello,
Since you have motioned that it is work well in IE7 on the VM. We can try to enable the compatibility view of the IE to troubleshooting the issue.
Reference: http://support.microsoft.com/kb/2536204
Based on your description, the issue is just occur when view the report remotely. The issue may relate to Internet Explorer, please refer to the following methods:
Run the Network Diagnostics tool in Internet Explorer.
Reset the modem or the router.
Use the Delete Browsing History feature.
Use the Internet Explorer (No Add-ons) mode.
More detail information, please refer to the similar issue below:
http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/internet-explorer-cannot-display-the-webpage/c8a0b157-820a-4a14-80f3-806ab51717fa
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Internet Explorer Cannot Display This Webpage

Hi,
My issue is that when ever user is clicking link or submit a form, sometimes instead of directing to a new page, it will show the internet explorer error page 'Internet explorer cannot display this webpage'. I didnt find any error message in the log in cf admin as well as IIS admin. Then I checked with a simple HTML page which refreshes in every 3 minutes. I found that this page is also showing the same issue. So I think the issue is not related to Coldfusion. Still the issue persists. So does anybody have any idea about this? Please advice. Thanks in advance.
The details are: And also the application is hosted in virtual machine.
Server Product
ColdFusion
Version
9,0,0,251028
Edition
Standard
Serial Number
Operating System
Windows 2003
OS Version
5.2
Adobe Driver Version
4.0 (Build 0005)
JVM Details
Java Version
1.6.0_17
Java Vendor
Sun Microsystems Inc.
Java Vendor URL
http://java.sun.com/
Java Home
D:\ColdFusion9\runtime\jre
Java File Encoding
Cp1252
Java Default Locale
en_GB
File Separator
Path Separator
Line Separator
Chr(13)
User Name
SYSTEM
User Home
C:\Documents and Settings\Default User
User Dir
D:\ColdFusion9\runtime\bin
Java VM Specification Version
1.0
Java VM Specification Vendor
Sun Microsystems Inc.
Java VM Specification Name
Java Virtual Machine Specification
Java VM Version
14.3-b01
Java VM Vendor
Sun Microsystems Inc.
Java VM Name
Java HotSpot(TM) 64-Bit Server VM
Java Specification Version
1.6
Java Specification Vendor
Sun Microsystems Inc.
Java Specification Name
Java Platform API Specification
Java Class Version
50.0

Seems like an issue with the web server or, perhaps, even your browser. To start with, make sure you have followed the steps for configuring IIS in ColdFusion 9. Next, make sure the MIME type for HTML files in IIS 6 is text/html, not text/htm.

Internet explorer hangs and loads webpages slow

Similar Messages

Maybe you are looking for