Internet Explorer MS04-038 patch causes javascript error in EP5 SP4

The problem in a nutshell that we are experiencing is that the portal Top Level Navigation returns a 'permission denied' javascript error. This is stemming from Microsoft's Internet Explorer Patch MS04-038 <i>(MS04-038 Cumulative Security Update for Internet Explorer
This update addresses 8 vulnerabilities in systems running Microsoft Internet Explorer [all supported versions], all of which can allow an attacker to take complete control of the system.  Microsoft has rated this patch as CRITICAL).</i>  We also can't get IE to recognize that the portal is a trusted site.
Any help would be appreciated!

It's a known problem, and can cause symptoms besides the one you mention, as described in
SAP Note 785308. Solutions and work arounds will be documented in this note as soon as they
are available:
<http://service.sap.com/~sapidb/012006153200001521102004E.ITF>.
This Note applies to EP5 and EP6, as well as ITS, BSPs, and Visual Composer.
The latest advice in the Note is, "do not apply MS Security Hotfix KB834707". Information on
"MS04-038: Cumulative Security Update for Internet Explorer" available at:
<http://www.microsoft.com/technet/security/bulletin/MS04-038.mspx>).
Regards,
Sean

Similar Messages

  • SP324081: Check that your Internet Explorer security settings will allow JavaScript and cookies. If enabled, please contact support.

    Hi,
    I have VS2013 update 4 and IE11 installed. When I try to sign in through VS I get the following error.
    SP324081: Check that your Internet Explorer security settings will allow JavaScript and cookies. If enabled, please contact support.
    I have checked and JAVASCRIPT and cookies are enabled.
    Any help is appreciated.

    Hi Sath12,
    If possible, I suggest you reset IE settings.
    Please lower the security level. Then I added the site like https://*.visualstudio.com/ to the trusted zones. Test it again.
    I have met this issue before which was related to the IE settings or the account issue.
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/290948f6-b4ca-41e3-9888-91fbbc71cdeb/cannot-register-sign-in-from-vs-express-2013?forum=visualstudiogeneral
    A connect report still shared some information about it:
    https://connect.microsoft.com/VisualStudio/feedback/details/811860/vs-express-2013-for-web-browser-is-security-restricted-or-javascript-is-disabled
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Internet Explorer Branding failed due to the error listed below Server 2012 R2

    After upgrading my AD and 1 DC of my two DC's to Server 2012 R2 I am seeing the error.
    Internet Explorer Branding failed due to the error listed below.
    The specified procedure could not be found.
    This is because the Group policy "Internet Explorer Branding" is defined.
    All discussion groups I have been able to find, suggest going onto the Windows 2008 R2 DC and use GPEDIT to remove this policy. Unfortunately, it does not appear where it should.
    How do I delete it?
    Thanks

    Hi Paul S I,
    Please notice that for managing IE10
    with Group Policy Preferences you need
    to use a Windows 8 or Server 2012 DC.
    For proxy server
    and proxy exception setting GPO setting, you can follow
    below post in our team blog to move the policy to GPP.
    How to apply IEM
    to IE10
    http://blogs.msdn.com/b/asiatech/archive/2013/07/01/how-to-apply-iem-to-ie10.aspx
    In the windows 2008R2,
    Internet Explorer 10 option won’t be displayed under the Preference->Control Panel Settings->
    Internet Settings.
     In addition, it would be helpful for further troubleshooting if you could collect the following information:
    What version of IE that you are using? In the above solution, we suppose you are using IE10.
    Could you provide the screenshort to provide detailed information?
    Regards,
    Lany Zhang

  • When in firefox, I get a message that says no version of windows media player is supported. When I euse internet explorer with the same website, no error occurs. Why?

    I am working in the H&R Block website. When I get ready to take a test in their system, I get that error message described above. If I exit Firefox and use internet explorer instead there is no problem.

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

  • Win 7 IE10 "Internet Explorer Branding failed due to the error listed below. The specified procedure could not be found."

    Hi All,
    I am testing some Windows 7 builds with IE10 installed and when I do a Resultant Set of Policies on them they all have an error in the user section of the GPOs as shown in the image.
    To investigate I unlinked all the IE policies from the OU and rebuilt the PCs and wiped the user accounts' roaming profiles (local already wiped with the format of the HDD for the rebuild) but still get the same error even with no IE policies
    applied. I have looked through RSOP and there are no settings applied either under the maintenance section or under Admin Templates > Windows Components > Internet Explorer.
    Please can someone fill me on how to stop this error from showing?
    Thanks

    Hi Robert,
    As I mentioned in my original post I see that message being "produced" when I run RSOP.msc and generate the results. I probably should have posted this image in as you can see what section is affected -
    I've been digging around in the event viewer and have found this multiple times throughout.
    This is an IE install downloaded directly from Microsoft.com. I've uninstalled it, rebooted,, re-downloaded again and re-installed it and am still getting the same output. If I leave IE8 on the PC I don't get this issue at all. We've not used the IEAK
    to configure it in any way.
    The problem occurs with the client trying to apply IE policies via group policy. I can only see the error when I run RSOP and generate an output.
    Another issue I've found is that it won't apply the proxy settings via group policy preferences IE control panel section - I'm having to use reg entries instead. I found this post with people having the same issue with the same error -
    http://social.technet.microsoft.com/Forums/windows/en-US/7efbd672-8196-4053-8167-d94da5d2f939/bypass-proxy-exceptions-are-not-coming-in-windows-8-thorugh-group-policy?forum=w8itprogeneral
    Which text file should I be looking for to trace it back from?

  • Internet Explorer has stopped working & causes windows to close the program Pavillion QU297AA#ABG

    I have a HP Pavillion QU297AA#ABG operating on Windows 7.  Since day one of installation I click on links and get the message
    Internet Explorer has stopped working.  A problem caused the program to sto working correctly.  Windows will close the program & notify you if a solution is available.
    I know it it not my internet as my laptop when used on my home wireless connection does not have this problem & neither did my previous desktop that I upgraded.  I also do not believe I have a virus as I have an AVG (the paid version) antivirus scan set to run everyday to detect problems.  This is so frustrating can anyone offer a solution as I have had this problem ever since I connected my new desktop pavillion.
    This question was solved.
    View Solution.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolving Internet Explorer Issues
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • The latest Lookout fix patch causes an error.

    I applied the latest fix patch for Lookout 4.5.1 dated 3/8/2002. It now causes this error when I attempt to open my program: "Cbl has caused an error in ALLBRAD.CBX. Cbl will now close." If I restore the original ALLBRAB.CBX the problem does not occur. Any ideas?

    We just currently put up the fixed ALLBRAD.CBX - check it out!
    www.ni.com/support > Drivers and Updates > Search Drivers and Updates > type 'Lookout 5' and you should get the link for 'Lookout 5.0 for Windows -- Fixes'
    Hope this helps
    Roland
    PS: You should be able to use the driver CBX version 5.0 in Lookout 4.5.1. Or you might consider to upgrade to Lookout 5.0. www.ni.com/lookout.

  • ExternalInterface.call Causes JAVASCRIPT ERROR??

    my AS3.0 is this:
    btn_mc.addEventListener(MouseEvent.CLICK,journey_popup);
    function journey_popup(e) {
    ExternalInterface.call("journey_wow_popup");
    my javascript is this:
    function journey_wow_popup () {
    window.open('journey_pricing.php','_blank',
    'height=200,width=350,status=yes,toolbar=no,menubar=no,location=no');
    My flash OBJET ID and movie name is "journey_wow"
    I get this javascript error when I click btn:
    Error: "journey_wow" is undefined
    I tried this on 4 computers, I never get the the error in FF,
    I got the error on 2/4 of the computers in IE and didnt get the
    Error in the other 2.
    So sometimes it works in IE and sometimes it doesn't. Also my
    flash element is not in a form.
    you can view it here:
    http://www.sussexjewelers.com/product.php?pid=1390
    (its the big red box with yellow star)
    Please help!!
    Thanks!

    Below is my embeding script, thanks.
    <script language="javascript">AC_FL_RunContent =
    0;</script>
    <script src="AC_RunActiveContent.js"
    language="javascript"></script>
    <script language="javascript">
    if (AC_FL_RunContent == 0) {
    alert("This page requires AC_RunActiveContent.js.");
    } else {
    AC_FL_RunContent(
    'codebase', '
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0',
    'width', '626',
    'height', '115',
    'src', 'journey_wow',
    'quality', 'high',
    'FlashVars',
    'journey_price=<?=round($prod_field['prod_price'][0])?>',
    'pluginspage', '
    http://www.macromedia.com/go/getflashplayer',
    'align', 'middle',
    'play', 'true',
    'loop', 'true',
    'scale', 'showall',
    'wmode', 'transparent',
    'devicefont', 'false',
    'id', 'journey_wow',
    'bgcolor', '#ffffff',
    'name', 'journey_wow',
    'menu', 'true',
    'allowFullScreen', 'false',
    'allowScriptAccess','always',
    'movie', 'journey_wow',
    'salign', ''
    ); //end AC code
    </script>

  • HT3986 can i install internet explorer on iMac without causing any problems

    is it ok to install internet explorer on MAC since safari will not open the webpage im trying to access

    hart23 wrote:
    http://ahainstructornetwork.americanheart.org/AHAECC/Student/Precourse-Self-Asse ssment---ACLS_UCM_427677_SubHomePage.jsp
    This is the exact page that I need to open and it will not do anything
    I see this (which makes sense as I do not have a profile)
    What do you see (a screenshot would be nice)

  • 275645.1 jdbc 10G patch causes dcm error

    Just a note, instead of opening a TAR, but the patch note
    275645.1
    That instructs on how to patch 10G app server to use the 10G thin drivers causes the dcm daemon to fail to start or connect to a database metatdata repository. After patching up, the dcm_daemon component will not start, and a dcmctl geterror retrieves the following stack trace and error (reverting back allows dcm to come back up):
    [oracle@northfork oraias]$ dcmctl geterror
    ADMN-100999
    See base exception for details.
    Base Exception:
    java.lang.NoSuchFieldError:TDU
    See base exception for details.
    java.lang.NoSuchFieldError: TDU
    at oracle.net.resolver.NavDescription.navigate(Unknown Source)
    at oracle.net.resolver.NavServiceAlias.navigate(Unknown Source)
    at oracle.net.resolver.AddrResolution.resolveAddrTree(Unknown Source)
    at oracle.net.resolver.AddrResolution.resolveAndExecute(Unknown Source)
    at oracle.net.ns.NSProtocol.establishConnection(Unknown Source)
    at oracle.net.ns.NSProtocol.connect(Unknown Source)
    at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:707)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:218)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:411)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:147)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:553)
    at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:215)
    at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:108)
    at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:76)
    at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:58)
    at oracle.jdbc.pool.OracleConnectionCacheImpl.getNewPoolOrXAConnection(OracleConnectionCacheImpl.java:506)
    at oracle.jdbc.pool.OracleConnectionCacheImpl.getPooledConnection(OracleConnectionCacheImpl.java:381)
    at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:305)
    at oracle.jdbc.pool.OracleConnectionCacheImpl.getConnection(OracleConnectionCacheImpl.java:285)
    at oracle.ias.sysmgmt.persistence.DBPersistence.getConnection(Unknown Source)
    at oracle.ias.sysmgmt.persistence.DBTopology.instances(Unknown Source)
    at oracle.ias.sysmgmt.persistence.PersistenceManager.getPersistenceInstance(Unknown Source)
    at oracle.ias.sysmgmt.persistence.PersistenceManager.getPersistenceInstance(Unknown Source)
    at oracle.ias.sysmgmt.persistence.PersistenceManager.getPersistenceInstance(Unknown Source)
    at oracle.ias.sysmgmt.persistence.PersistenceManager.create(Unknown Source)
    at oracle.ias.sysmgmt.persistence.PersistenceManager.<init>(Unknown Source)
    at oracle.ias.sysmgmt.persistence.PersistenceManager.<init>(Unknown Source)
    at oracle.ias.sysmgmt.task.TaskMaster.initRepository(Unknown Source)
    at oracle.ias.sysmgmt.task.TaskMaster.<init>(Unknown Source)
    at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
    at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
    at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkInit(Unknown Source)
    at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
    at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
    [oracle@northfork oraias]$

    Mike - we have the same problem. I recently opened a TAR on this and was told by support that an "unpublished comment" on that note indicates that the driver upgrade is not compatible with non-standalone OC4J containers.
    This is despite the note being titled as for OracleAS and it being referenced in 277516 - OracleAS 10g Patchset 1 (9.0.4.1) Post-Release Note.
    Would be interested if anyone has overcome this particular error and successfully upgraded their JDBC drivers.

  • Error message from Internet Explorer v8.0.6

    My Muse test site is currently on Business Catalyst. The url is http://wfax-test.businesscatalyst.com — my client says that they get an error message from Internet Explorer version 8.0.6 "MuseJSAssert: error calling selector function: error: a security problem occurred". The good news is that this only appears on the "Schedule" page of the site. Any idea what it could be? My client is afraid for me to put the site online because of this error message.

    Hi Artby,
    In your page, you have a link to "http://[email protected]//[email protected]" (Saturday Afternoon at 3:00). This link is technically a valid link, but I'm not sure it is what you intended. If you where looking to create an email there, you should remove the http:// in front of the link and Muse should properly create an email link. If you were trying to go to a website, I'd recommend you check the URL again to make sure you have it right.
    The link is throwing a security error because we have to do some extra processing for some of our links, so we check each of the urls and try to determine if there is extra logic we need. In this case, this link is telling the browser you'd like to "login" to the site qemi.org with the username "apostle". IE 8, by default, will block us from reading information from this type of link in case there is a password, or in case we shouldn't know the username. It is a security measure (thus the error) and should pose no risk.
    If you did intend to have that URL, then this won't quite work at the moment in Muse. To work around this, you could pull out this small snippet into a custom HTML element or something, which Muse won't try and process (though you'd need to remove the class "nonblock" from the link if you copy/pasted the Muse export code).
    Hope that helps,
    Andrew

  • IWeb photo galleries cause Internet Explorer to crash

    Please help! I am a novice as far as web design goes and have spent a long time getting my site up and going. It works perfectly on Firefox, Chrome, Safari etc but when using Internet explorer the photo galleries cause the browser to crash/freeze.
    If you leave it for approximately 5 minutes sometimes it starts working again.
    My website is www.hboydwatercolours.co.uk
    Any help would be very much appreciated.

    ps i am using *iweb 3.0.2*

  • Infinite loop in internet explorer after setting a doctype

    Hy,
    I have a problem with doctype, the internet explorer 6 - 8,  iframes and javascript. If I set the doctype to transitinal loose.dtd some of the Web Dynpro Applicatons which where included to my HTML page in form of iframes, produce javascript errors (looks like an infinite loop) so that every tested internet explorer crashes.
    Firefox has no problems and IE has no problems if:
    - I doesn't set any doctype (quirks mode)
    - or set a docype and open my iViews in a seperate Window
    I have no idea to solve this problem. I have to set a doctype. The cause of the problem lies in include iframes in the page and in the exclusive IE javascript file: sapUrMapi_ie6.js, where in the codelines 2643 - 2646 is an infinite loop because of some errors.
    What are the reasons for this javascript errors? How can I solve my problems?
    Thank you for every tip. Buy

    Hi Saeed.
    Thanks for your reply. As it turns out, the problem was how I was accessing the server, which was blocking display of some windows. I was using an IP address and once I used the name of the server instead, the access became a more approved level and I could access all the windows. Just FYI in case anyone else runs into this!
    Thanks!

  • "Internet Explorer Branding failed..." even after the GPO was deleted

    Our environment is Server 2008 R2 on all servers and Windows 7 Pro 64bit on workstations. Both servers and workstations are on IE10. When running RSOP on the servers we get the following message under the User section:
    "Internet Explorer Branding failed due to the error listed below. The specified procedure could not be found."
    I found that a GPO still applied IE settings through Internet Explorer Maintenance. I've since created a new GPO using GPP and deleted the old GPO. The problem is that the error still appears when running RSOP.
    How can I remove these old GPO settings?

    Hi,
    Before going further, we need make sure that whether there is another GPO with Internet Explorer Maintenance settings configured
    has been applied to the machine.
    Besides, I want to confirm with you that whether the old GPO has been unlinked and permanently deleted. In order to narrow down
    the cause of the issue, I suggest we could collect the following information.
    GPMC.log
    ==================
    a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
    b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please
    place appropriately). (Choose computer and select the proper user in the wizard)
    c. Right click the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML
    file.
    Once you get the report,
    you may upload it to the Skydirve and provide me the download link.
    In addition, after running GPupdate /force command, please try to logoff and re-logon to see what will happen.
    Best regards,
    Frank Shen

  • ORARRP + Internet Explorer 7

    Hello guys,
    I am trying to use the ORARRP with Internet Explorer and I am getting an error.
    Anyone knows if there is some bug or an incompatibility between ORARRP and IE7?
    Thanks,
    Paulo.

    We have have a tonne of issues with GUI 7.10.
    Make sure you have the latest patch level. I think the current is SP1.
    Do a complete uninstall of the gui and reinstall the up to the current patch level.
    TC

Maybe you are looking for