Internet Explorer's forward/backward for next/previous image

In addition to right/left arrow to move to next/previous image I would like LR team to add this keyboard shortcut:
Use Internet Explorer's forward for next image.
Use Internet Explorer's backward for previous image.
Here is the reason. I have ViewSonic mouse with five buttons. Extra two buttons I use for forward/backward command within Internet Explorer. It would be nice if the same two extra buttons I could use in LR.
At the moment I have the two extra buttons programmed to function as right/left arrow. That allows me to use them to go next/previous image in LR. In order to use them as a forward/backward command within IE I have to press Alt key.
It would be nice if LR team could add IE forward/backward to the list of keyboard shortcuts.
Best regards,
Ivan Kmecko

This is a function of the mouse driver...you should be able to configure settings based on the current application so LR and IE can use the same keys but it'll mean different things in each app.

Similar Messages

  • Cursor keys do not properly change to next/previous image

    Since a few days, one of my two Lightroom-computers shows a permanent, quite annoying bug, regarding the curser left/right key:
    It happens in loupe view:
    When I press the cursor-right key, Lightroom doesn't change to the next image
    Instead, it doesn't stop changing to the next image before it reaches the end of the folder .
    Correspondingly with cursor-left, which takes me always to the first image in of the folder...
    Browsing in loupe view is nearly impossible, just the mousewheel still allows to change to the next/previous image.
    This happens for all sets, catalogues, folders, etc. If I have selection, then it takes me to the first/last image of the selection, nothing in between possible.
    Any advice, what went wrong with my system? Everything was smooth a few weeks ago, and everything works fine on my other computer, which should just behave the same...
    Thanks for any hints!
    Harald

    After hours of testing, I identified the reason:
    The problem was raised by the service "skdaemon.exe".
    It's meant to be a keyboard enhancing utility, which was preinstalled (und later updated) on this computer.
    After deactivation (from autostart), LR works fine again, and I didn't notice any missing keyboard functions yet.
    Maybe, this helps someone else in getting around that problem, and thanks for the support.
    Harald

  • Internet Explorer 7.0 setting for Planning

    Hi Hyperion Experts,
    I read many times in this forum that Planning faces problem with Internet explorer 7.0 and better to use earlier version. otherwise some settings required in IE 7.0.
    Could anybody help me how to set IE 7.0 for Planning as I'm unable to degrade My IE.
    Thanks in advance for any help!!
    Regards
    N Kumar

    Hi John,
    thanks for providing solution and inputs based on your experience.
    One additional information i would like to request :-
    i am having notebook with Core 2 Duo + 2.5 GB RAM + Vista Premium. as i feel my envirnment (OS) is not stable enough due to some reason. wolud you recommend me to use VMware for planning+essbase if yes then which ver or product. so that i can enjoy my learning rather than just putting my head into technology.....
    I am awiting for your valuable inputs....
    Regards
    N Kumar

  • Internet Explorer has no place for me to hit "print". What do I do?

    On my Internet Explorer, I have no place to hit "print". Even when I right click, there's no choice for "print". What's my problem? I am not computer literate, so please instruct me in "everyday" language. Thank you.

    That isn't a built-in feature of Firefox, so you might already have the add-on. Sometimes add-ons become disabled due to not being up-to-date. Or if you used the Firefox Reset feature, none of your extensions are retained.
    You can check the status of your extensions on the following screen. Note that the disabled ones cluster at the bottom:
    orange Firefox button (or Tools menu) > Add-ons > Extensions category
    If you have Print/Print Preview can you enable it?
    You can check for updates using the "gear" button > Check for Updates (the gear button appears above the list of extensions).
    If you do not have the Print/Print Preview extension, try the earlier link to go get it.

  • Internet Explorer not recording scores for SCORMS

    I am having a problem with Internet Explorer not recording the scores for SCORMS developped in Captivate 7.   A Forum in Moodle suggested that the problem is that Internet Explorer always has an error with the instruction DoBeforeUnload.  I can see that this is always causing a problem.  Do you have any suggestions or work arounds for this?

    I am using Captivate 7 to produce the SCORMS, and the courses are hosted in MOODLE 2.5.  The scores are recorded well in google Chrome but not in Internet Explorer. I have been trying out the courses with Internet Explorer 10 and 11 and both produce the same error: 
    A moodle forum suggested that IE10 and IE11 do not like the command DoBeforeUnload, and need the command BeforeUnload. (I have checked the Moodle SCORM API and the commands and scores are being sent.)

  • Internet Explorer has stopped working for IE8&9 in win7 for Oracle apps

    Dear All,
    While opening forms in windows 7 proffessional we are getting the below error ..
    Internet Explorer has stopped working
    after click the online solution getting the below
    Internet Explorer has closed this webpage to help protect your computer for IE8 and IE 9
    and it was working with Win XP and IE7...
    my Oracle application verion is 11.5.10.2
    forms developer version is 6.0.8.25
    i have checked the IE8 is certified with 11i for win7..
    Oracle Jinitiator version 1.3.1.21
    and i have tried with firefox also but it was not opening and it was stoppped at the second window i think we need install extension but enable Java for this not useful.
    i have tried with so many solution via google but resolved it....
    if any one give me solution for this and also tell me how to open forms in firefox for oracle 11i
    Thanks in Advance.....

    Hi,
    i tried upgraded the JRE but not solved.
    the problem is INTERNET EXPLORER has stopped working while opening forms
    and view problem details shows like below..
    Problem signature:
    Problem Event Name:     BEX
    Application Name:     iexplore.exe
    Application Version:     9.0.8112.16457
    Application Timestamp:     50a2f9e3
    Fault Module Name:     jvm.dll
    Fault Module Version:     0.0.0.0
    Fault Module Timestamp:     451ba4ef
    Exception Offset:     000bc430
    Exception Code:     c0000005
    Exception Data:     00000008
    OS Version:     6.1.7601.2.1.0.256.48
    Locale ID:     1033
    Additional Information 1:     f021
    Additional Information 2:     f021b4c9b91f8291caac8e31885832ca
    Additional Information 3:     4050
    Additional Information 4:     4050b4b420130162e60322654968da93
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    I think it was problem with IE settings or if IE8 and IE9 in win7 not supported for 11.5.10.2..
    is it correct if not pls correct me?..
    please help us..
    Thanks in advance...

  • How do I enlarge a small photo I have scanned to my computer photo album ("My Pictures") to facebook; the steps that worked for Internet Explorer won't work for Mozilla?

    I scanned a small photo(2 x 3) with my Dell printer and stored it in my computer photo album "My Pictures." Now I would like to upload an enlargement of the picture to my Facebook photo album. The steps I used with Internet Explorer for enlarging an uploaded photo for Facebook will not work with Mozilla. My Adobe Flashplayer that I used with Internet Explorer would not work with Mozilla, so I downloaded a plug-in Adobe Flashplayer (10.) What else do I need to do? Please give me specific instructions as I am 69 years old and not as computer literate as young people! LOL Thank you. Evelyn Drown E-mail: [email protected]

    Some website that can resize images:
    * http://www.resizr.com/
    * http://www.shrinkpictures.com/
    * http://www.picresize.com/

  • When I open an email with images, Outlook Express keeps defaulting to Internet Explorer rather than FireFox to get the image, since I have IE disabled this means that I see no image. I have FF set as my default browser. Please can you help?

    I first noticed the problem 3 months ago when a virus set a proxy on Internet Explorer. Removal of the proxy brought the image back, but this showed that Outlook Express uses IE to get images even when FF is set as default browser

    I might be able to experiment with this a little.
    Are you running a recent version of Outlook Web App (i.e., Exchange 2010)?
    When you save files using IE, what format are they in (e.g., EML, RTF, HTML)?

  • Next/previous image in imageslider

    Hi there. I can't seem to get the next/previous buttons working. I get the error "
    1061: Call to a possibly undefined method addEventListener through a reference with static type function
    What's going wrong?
    This is the code:
    import fl.containers.UILoader;
    //Declaring Variables
    var menu:MovieClip = menuMc;
    // var prevBtn:MovieClip = menuMc.prevBtnMc;
    // var nextBtn:MovieClip = menuMc.nextBtnMc;
    var playBtn:MovieClip =  menuMc.playBtnMc;
    var stopBtn:MovieClip =  menuMc.stopBtnMc;
    var nextBtn:MovieClip =  menuMc.nextBtnMc;
    var prevBtn:MovieClip =  menuMc.prevBtnMc;
    var imgFolder:String = "imgs/"
    var imgArray:Array = new Array("1.jpg","2.jpg","3.jpg","4.jpg","5.jpg","6.jpg","7.jpg","8.jpg");
    var imgLoader:UILoader = imgLoader;
    var imgCntr:uint = 0;
    var imgCntrTotal:uint = imgArray.length;
    var imgRequest:URLRequest = new URLRequest(imgFolder + imgArray[imgCntr]);
    var imgCntrTxt:TextField = menu.imgCntrTxtTf;
    var slideShowTimer:Timer = new Timer (5000,0);
    var imgVisible:Boolean = true;
    //Init
    playBtn.stop();
    stopBtn.stop();
    nextBtn.stop();
    prevBtn.stop();
    imgLoader.load(imgRequest);
    imgCntrTxt.text = (imgCntr).toString() + "/" + imgArray.length.toString();
    //Events
    //Play
    playBtn.addEventListener(MouseEvent.MOUSE_DOWN,playBtnDown);
    playBtn.addEventListener(MouseEvent.MOUSE_OVER,playBtnOver);
    playBtn.addEventListener(MouseEvent.MOUSE_OUT,playBtnOut);
    //Stop
    stopBtn.addEventListener(MouseEvent.MOUSE_DOWN,stopBtnDown);
    stopBtn.addEventListener(MouseEvent.MOUSE_OVER,stopBtnOver);
    stopBtn.addEventListener(MouseEvent.MOUSE_OUT,stopBtnOut);
    //Next
    nextBtn.addEventListener(MouseEvent.MOUSE_DOWN,nextBtnDown);
    nextBtn.addEventListener(MouseEvent.MOUSE_OVER,nextBtnOver);
    nextBtn.addEventListener(MouseEvent.MOUSE_OUT,nextBtnOut);
    //Previous
    prevBtn.addEventListener(MouseEvent.MOUSE_DOWN,prevBtnDown);
    prevBtn.addEventListener(MouseEvent.MOUSE_OVER,prevBtnOver);
    prevBtn.addEventListener(MouseEvent.MOUSE_OUT,prevBtnOut);
    //Timer
    slideShowTimer.addEventListener(TimerEvent.TIMER,timePassed);
    //EventHandlers
    //Play
    function playBtnOver(e:MouseEvent){
              playBtn.gotoAndStop(2);
    function playBtnOut(e:MouseEvent){
              playBtn.gotoAndStop(1);
    function playBtnDown(e:MouseEvent){
              //Slideshow / Timer starten
              slideShowTimer.start();
    //Stop
    function stopBtnOver(e:MouseEvent){
              stopBtn.gotoAndStop(2);
    function stopBtnOut(e:MouseEvent){
              stopBtn.gotoAndStop(1);
    function stopBtnDown(e:MouseEvent){
              // Slideshow / Timer Stoppen
              slideShowTimer.stop();
    //Next
    function nextBtnOver(e:MouseEvent){
              nextBtn.gotoAndStop(2);
    function nextBtnOut(e:MouseEvent){
              nextBtn.gotoAndStop(1);
    function nextBtnDown(e:MouseEvent){
              nextImg.play();
    //Previous
    function prevBtnOver(e:MouseEvent){
              prevBtn.gotoAndStop(2);
    function prevBtnOut(e:MouseEvent){
              prevBtn.gotoAndStop(1);
    function prevBtnDown(e:MouseEvent){
              prevBtn.play();
    //SlideShowTimer
    function timePassed(e:TimerEvent){
              imgLoader.addEventListener(Event.ENTER_FRAME,fadeImg);
    //Functions
    function fadeImg(e:Event){
              if(imgVisible == true){
                        imgLoader.alpha = imgLoader.alpha - 0.05;
                        if(imgLoader.alpha <= 0){
                                  imgVisible = false;
                                  nextImg();
              if(imgVisible == false){
                        imgLoader.alpha = imgLoader.alpha + 0.05;
                        if(imgLoader.alpha >= 1){
                                  imgVisible = true;
                                  imgLoader.removeEventListener(Event.ENTER_FRAME,fadeImg);
    function nextImg(){
              if(imgCntr < imgCntrTotal){
                        imgCntr++; //staat gelijk aan imgCntr + 1
              }else{
                        imgCntr = 0;
                        imgRequest = new URLRequest(imgFolder + imgArray[imgCntr]);
                        imgLoader.load(imgRequest);
                        imgCntrTxt.text = imgCntr.toString() + "/" + imgCntrTotal.toString();
    function prevImg(){
              if(imgCntr == 0)
                        imgCntr = imgArray.length -1;
                        imgCntr--;
                        imgRequest = new URLRequest (imgFolder + imgArray [imgCntr]);
                        imgLoader.load(imgRequest);
                        imgCntrTxt.text = imgCntr.toString() + "/" + imgCntrTotal.toString() ;
    function tfF():void{
        imgCntrTxt.text = (imgCntr+1) + "/" + (imgCntrTotal);
    Help much appreciated

    says this now about
    Scene 1, Layer 'As', Frame 1, Line 103
    1180: Call to a possibly undefined method prevBtn.
    related code:
    var prevBtn:MovieClip =  menuMc.prevBtnMc;
    //Previous
    prevBtn.addEventListener(MouseEvent.MOUSE_DOWN,prevBtnDown);
    prevBtn.addEventListener(MouseEvent.MOUSE_OVER,prevBtnOver);
    prevBtn.addEventListener(MouseEvent.MOUSE_OUT,prevBtnOut);
    //Previous
    function prevBtnOver(e:MouseEvent){
              prevBtn.gotoAndStop(2);
    function prevBtnOut(e:MouseEvent){
              prevBtn.gotoAndStop(1);
    function prevBtnDown(e:MouseEvent){
              prevBtn();
    function prevImg(){
              if(imgCntr == 0)
                        imgCntr = imgArray.length -1;
                        imgCntr--;
                        imgRequest = new URLRequest (imgFolder + imgArray [imgCntr]);
                        imgLoader.load(imgRequest);
                        imgCntrTxt.text = imgCntr.toString() + "/" + imgCntrTotal.toString() ;

  • What is the Keyboard Shortcut for Next/Previous Message in Lion Mail?

    Using the 'full screen' message viewer (rather than the preview pane) how do I progress to an older/newer message in a folder without closing the window?

    MOE O wrote:
    So Entourage can go to the previous message?  How do you do that?
    I can't stand that Mail always goes to the next newest message after deleting.
    Every other email program I've ever seen (including Entourage - see below) can do this.  Why can't Apple?  I don't want to touch the mouse most of the time because it really slows down work to move ones hands back and forth.   I did a quick web search and found these shortcuts for all the major programs.  If you know of any other program besides Apple Mail that doesn't have this, let me know.
    Until then, if Outlook, Outlook Express, Entourage, Sparrow, Postbox, and Thunderbird have had this, what's Apple's problem adding it?
    David
    Postbox Shortcuts
    For our power users, here's a list of Keyboard Shortcuts that you can use to navigate your way through Postbox.
    Message Navigation
    Mac OS X
    Windows
    Go Home
    Command + Shift + H
    Home
    Go to Next Message
    F
    F
    Go to Previous Message
    B
    B
    Go to Next Unread Message
    N
    N
    Go to Previous Unread Message
    P
    P
    Go to Next Viewed Message
    Go to Previously Viewed Message
    Sparrow
    Go to previous / next message  - cmd-[ / cmd-]
    Outlook Express
    Go to the next message in the list
    CTRL+> or CTRL+SHIFT+>
    Go to the previous message in the list
    CTRL+< or CTRL+SHIFT+<
    View properties of a selected message
    ALT+ENTER
    Refresh news messages and headers
    F5
    Go to the next unread e-mail message
    CTRL+U
    Entourage
    Display the previous message
    ⌘+[
    Display the next message
    ⌘+]
    Display the previous unread message
    CONTROL+[
    Display the next unread message
    CONTROL+]
    Moving around Thunderbird
      ⇐  |   ⇑  |   ⇒ 
    Moving between messages
    Go to Next Message
    F
    Go to Previous Message
    B
    Go to Next Unread Message
    N
    Go to Previous Unread Message
    P
    Go to Next Unread Thread (and mark current thread as read)
    T
    Go to Next Viewed Message
    Go to Previous Viewed Message
    outlook 2010:
    Switch to next message (with message open).
    CTRL+PERIOD
    Switch to previous message (with message open).
    CTRL+COMMA 

  • Carry forward data for next period

    Hi,
    Lets say A is transfering asset to B with profit... so there will be
    a unrealized profit that has to be eliminated in the group reporting.. Lets say I manage to eliminate this in bcs,
    so, the bcs retained earning will be reduce due to this unrealized profit right?
    when the balance carry forward next period, bcs b/f retained profit is the profit after we eliminate the unrealized profit.
    When we do load from the data stream again, the b/f retained earning in R/3 will still include the unrealized profit right?
    how do we want to make the unrealised profit to be eliminated permanently?
    Edited by: shahrul yusof on Feb 25, 2008 4:50 AM

    Well, Shahrul,
    The Balance carryforward is rather well provided here:
    http://help.sap.com/saphelp_sem60ep1/helpdata/en/53/01ad3c99c90455e10000000a114084/frameset.htm
    Remember that all data load (without manual entries) happens in  the posting level PL = 00. Eliminations are done on PL = 20 or 30.
    And during the bcf the data becoming a new initial balance goes to period 000.
    What's bothering you?

  • "ECL viewer" 4 Internet explorer or similar solution for attachments in WDA

    Hi,
    When viewing attachments in our WDA application (DOCX, TIFF, PDF, etc.) we are dependent of the user installing the right programs to view them. Adobe reader for PDF, Word for DOCX, Alternatiff for TIFF etc.
    Is it possible to install a client application that does what ECL/SAP Viewer does in R/3?
    OR
    Would it be possible to handle this purely inside WDA?
    Either would certainly ease client setup on the portal.
    BR
    Lasse
    P.s. Sorry for the immature numerical concatenation in the subject, but I ran out of characters and what can you do? I'm only human

    Hi,
    Thanks for moving it, I didn't notice the .NET section.
    No, it's not a time-out. I can make it crash immediately by opening the page, clicking on the button to refresh the report, changing the parameters, and then clicking the button again.
    Edit:
    This is very strange. Using Fiddler to launch IE makes it behave itself! It won't crash! However, when I go to the site with IE launched by Fiddler, it asks me for my login credentials. I'm not sure why it needs them. What does Fiddler do to IE to make it not include network authentication?
    Edited by: Sybsward on Dec 21, 2010 3:30 PM

  • Internet Explorer web browser app for iphone 4?

    Is there an IE web browser app or one that mimics EI?

    Julian Wright wrote:
    I wanted something that was more like a regular browser.
    You're not going to get something more like a desktop browser (if that's what you mean by regular) on any device with a 3.5 inch screen.
    Safari seems limited.
    In what way? Safari is almost universally regarded as being the best mobile browser on any device. It's support for web standards, and its rendering engine are far better than what you are used to in IE.
    Exactly what do you feel is missing?
    Are you referring to Safari's HTML rendering engine (it's ability to display websites accurately), or features of the browser itself?
    Well I guess I was expecting too much for a phone browser. But thanks for the info on Safari.

  • Warning: Internet Explorer now removes support for applet and embed

    I think this message should be here:
    http://forum.java.sun.com/thread.jsp?forum=30&thread=370869&tstart=0&trange=15
    - bjorn

    <OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" width="168" height="605" align="baseline" codebase="http://java.sun.com/getjava/">
    <PARAM NAME="code" VALUE="com.my.package.appletName">
    <PARAM NAME="type" VALUE="application/x-java-applet">
    <PARAM NAME="scriptable" VALUE="true">
    <script language='JavaScript'>document.location.href='MOD_install_java_message.html?setEvent=&programTitle=the%20Crop-Tool';</script>
    <!--
    <center>
    <table bgcolor=#000000 cellpadding=0 cellspacing=1 border=0><tr><td>
    <table bgcolor=#ffffff><tr><td>
    <font color='red'><b>Your browser does not seem to support Java.</b></font><br><br>
    You need to have Java installed on your system.<br>
    You can download it from <b>here</b>.
    </td></tr></table></td></tr></table>
    </center>
    -->
    </OBJECT>

  • Next / previous image swap WITH larger image popup

    Very simply what I need to do is almost identical to what you
    see here:
    http://www.java-scripts.net/javascripts/Slide-Show-Script.phtml
    (scroll down to the animal pictures)
    When you click "next" and "previous" the images swap through
    a series
    called "img1.gif" "img2.gif" and "img3.gif"
    So far so good. However let us assume there is also a set of
    images called
    "img1_lrg.gif" "img2_lrg.gif" and "img3_lrg.gif" which are
    larger
    versions of those little thumbnails. I need for the
    appropriate associated
    large image to popup in its own window when the thumb is
    clicked.
    Has anyone a lead on something like that?
    Thanks very much.

    On Thu, 28 Sep 2006 17:59:37 +0000 (UTC), [email protected]
    (Clay)
    wrote:
    >Very simply what I need to do is almost identical to what
    you see here:
    >
    >
    http://www.java-scripts.net/javascripts/Slide-Show-Script.phtml
    >
    >(scroll down to the animal pictures)
    >
    >When you click "next" and "previous" the images swap
    through a series
    >called "img1.gif" "img2.gif" and "img3.gif"
    >
    >So far so good. However let us assume there is also a set
    of images called
    >
    >"img1_lrg.gif" "img2_lrg.gif" and "img3_lrg.gif" which
    are larger
    >versions of those little thumbnails. I need for the
    appropriate associated
    >large image to popup in its own window when the thumb is
    clicked.
    >
    >Has anyone a lead on something like that?
    >
    >Thanks very much.
    That sounds simple, where are you stuck? Do you not know how
    to open a
    popup? BTW, the JustSo Picture Window extension would be
    perfect for
    the popups.

Maybe you are looking for

  • In BSP how to give the input field as mandatory?

    Hi friends, In BSP how to give the input field as mandatory? In BSP i want to validate the input field (example checking the material no is valid or not) if this material no doesnot exit means i want to pass error message.What is the code for that. M

  • PLEASE HELP!!! Error - 36 when copying from powerbook to iMac/Lacie HDs

    I'm working on a film and have captured to my powerbook G4 in FCP. I am now trying to transfer my scratch disk to either my iMac (intel 2.4GHz) or my Lacie HD extreme 500 GB / Lacie 250 GB. When I drag the folder over, it starts copying and then at s

  • Error in Dunning Data

    Hi all, I had small issue with my project. The user is trying to change the dunning procedure in Customer Master Data. The system is throwing an error saying that "System error in module KNB5_DEFAULT_ANZIEGE, table XKNB5" Do you know what the problem

  • I am trying to install an updated version of the Adobe flash player for my videos to play.

    I have a Linux computer with Ubuntu, and I use Google Chrome. I uninstalled the older version of the Adobe flash player, and now I cannot install the newer version of the Adobe flash player. What do I do?

  • The quickest way to create multi clips?? for stereo test

    I'm on location. Want to test a stereo camera setup. I've never worked with multi-clips before. I don't have the time to study the manual till I figure out how multi clips work. Is there an 'easy' way for me to create a multi-clip setup using the two