Internet Explorer Security warning in HTTPS evironment
Hello,
We have a webdynpro application which is integrated into portal.
The app runs in https environment.
The problem is: during accessing the page, I get the warning popup:
"This page contains both secure and nonsecure items. Do you want to display the nonsecure items?"
The problem is in the calendar drop down component run not in https environment (standard webdynpro -->javascript).
Do you have idea for the possible solution?
Thanks
Hi,
My immediate reaction is don't panic! If you are testing your
own page from your own local server then there is nothing to worry
about. The whole issue of Active X controls is another sore point
when having to deal with Microsoft's handling of interactive
content.
Triggering of the warning can be caused by various things
other than the obvious contact with dynamic content. Here is an old
thread from a discussion on why Active X warning appear on your own
pages.
http://www.dreamincode.net/forums/showtopic16624.htm
Googling will find more evidence for you to trace. Your code
looks fine to me and is not a threat to your system if it came off
of your own local server.
Active X is a pain in the butt.
regards
Nick Barling
www.barkingweb.com
Similar Messages
-
Internet Explorer Security Warning Message
Hi am using pure html and am sure not using any active
components in my page.
When i preview in Internet Explorer, though it shows the
page, but in the top it gives a security warning:
To help protect your security, Internet Explorer has
restricted this file from showing active content that could access
your computer. Click here for options.
Someone said the the java script tag is giving the warning,
but even after removing that tag, am getting that warning message
The same page, doesn't give any error or warning when
previewd in Firefox!
Can someone point me where am going wrong in the html code i
writen?
Thanks in advance.
Hammer.
The Code:
----------------Hi,
My immediate reaction is don't panic! If you are testing your
own page from your own local server then there is nothing to worry
about. The whole issue of Active X controls is another sore point
when having to deal with Microsoft's handling of interactive
content.
Triggering of the warning can be caused by various things
other than the obvious contact with dynamic content. Here is an old
thread from a discussion on why Active X warning appear on your own
pages.
http://www.dreamincode.net/forums/showtopic16624.htm
Googling will find more evidence for you to trace. Your code
looks fine to me and is not a threat to your system if it came off
of your own local server.
Active X is a pain in the butt.
regards
Nick Barling
www.barkingweb.com -
Internet Explorer security message blocks my vrml from playing
I created a simple flash interactive saved as an exe file. I
created a button with a “get url” script to launch a
quicktime vrml, it launches internet explorer and a security
message about active content appears, which blocks the vrml from
playing. Is there anyway the vrml can open without getting the
internet explorer security message?Hi,
My immediate reaction is don't panic! If you are testing your
own page from your own local server then there is nothing to worry
about. The whole issue of Active X controls is another sore point
when having to deal with Microsoft's handling of interactive
content.
Triggering of the warning can be caused by various things
other than the obvious contact with dynamic content. Here is an old
thread from a discussion on why Active X warning appear on your own
pages.
http://www.dreamincode.net/forums/showtopic16624.htm
Googling will find more evidence for you to trace. Your code
looks fine to me and is not a threat to your system if it came off
of your own local server.
Active X is a pain in the butt.
regards
Nick Barling
www.barkingweb.com -
Hi,
I have VS2013 update 4 and IE11 installed. When I try to sign in through VS I get the following error.
SP324081: Check that your Internet Explorer security settings will allow JavaScript and cookies. If enabled, please contact support.
I have checked and JAVASCRIPT and cookies are enabled.
Any help is appreciated.Hi Sath12,
If possible, I suggest you reset IE settings.
Please lower the security level. Then I added the site like https://*.visualstudio.com/ to the trusted zones. Test it again.
I have met this issue before which was related to the IE settings or the account issue.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/290948f6-b4ca-41e3-9888-91fbbc71cdeb/cannot-register-sign-in-from-vs-express-2013?forum=visualstudiogeneral
A connect report still shared some information about it:
https://connect.microsoft.com/VisualStudio/feedback/details/811860/vs-express-2013-for-web-browser-is-security-restricted-or-javascript-is-disabled
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Internet explore security popups
Hi i am having trouble with popups from internet explorer security saying a websight wants to open web content using this program on your computer, Adobe Flash Player. I already have Adobe Flash Player. no matter what i do it keeps popping up. i click don't allow it goes away for a second then pops up again over and over when i try to go to another page can you please help me. it is very frustrating
If the pages contain Flash Content, this is normal unless you have your Flash Player set to allow storage. See :http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html for more info.
If however, you see this when visiting pages that DO NOT have Flash content (regular HTML pages), you're infected with "Adware" which is using Flash Player to attempt to bombard you with ads.
You need to run a thorough virus scan and I'd recommend downloading and running TDSSKiller from Kaspersky as well. -
Anyone else having problems running Jinitiator 1.3.1.22 in Internet Explorer 7.0 in HTTPS mode? I'm getting the usual unhelpful java.lang.ClassNotFoundException:oracle.forms.engine.Main error.
Works okay in HTTP mode. Confirmed that JInititiator and the certdb.txt file were okay by connecting successfully with IE 6.0 in HTTPS.Thank you for a very informative response.
I installed 1.3.1.26 and get the same error when trying to connect to Forms in HTTPS mode.
I also verified I can download the frmall.jar file directly from the server.
Here's what I found in the OHS access log:
192.168.1.1 - - [14/Nov/2006:16:01:55 -0600] "GET /forms/lservlet HTTP/1.1" 200 223
192.168.1.1 - - [14/Nov/2006:16:02:04 -0600] "GET /forms/frmservlet?ok=OK+to+continue HTTP/1.1" 200 3931
192.168.1.1 - - [14/Nov/2006:16:02:04 -0600] "GET /forms/java/frmall_jinit.jar HTTP/1.1" 200 1188684
192.168.1.1 - - [14/Nov/2006:16:02:29 -0600] "GET /forms/java/java/awt/KeyboardFocusManager.class HTTP/1.1" 404 381
192.168.1.1 - - [14/Nov/2006:16:02:29 -0600] "GET /forms/java/java/awt/KeyboardFocusManager.class HTTP/1.1" 404 381
192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/java/awt/event/MouseWheelListener.class HTTP/1.1" 404 385
192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/java/awt/event/MouseWheelListener.class HTTP/1.1" 404 385
192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/oracle/forms/registry/Registry.dat HTTP/1.1" 200 4216
192.168.1.1 - - [14/Nov/2006:16:02:30 -0600] "GET /forms/java/oracle/forms/registry/default.dat HTTP/1.1" 404 379
Here's the corresponding entries from the OHS error log:
[Tue Nov 14 16:02:29 2006] [error] [client 192.168.1.1] [ecid: 4760584573966,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/KeyboardFocusManager.class
[Tue Nov 14 16:02:29 2006] [error] [client 192.168.1.1] [ecid: 4777764443166,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/KeyboardFocusManager.class
[Tue Nov 14 16:02:30 2006] [error] [client 192.168.1.1] [ecid: 4760584573982,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/event/MouseWheelListener.class
[Tue Nov 14 16:02:30 2006] [error] [client 192.168.1.1] [ecid: 4794944313801,1] File does not exist: c:/oracle/mid1012/forms/java/java/awt/event/MouseWheelListener.class
[Tue Nov 14 16:02:30 2006] [error] [client 192.168.1.1] [ecid: 4812124183473,1] File does not exist: c:/oracle/mid1012/forms/java/oracle/forms/registry/default.dat
Again, I can connect via HTTP mode. This only occurs when connecting via HTTPS.
Unfortunately, our customers must use HTTPS mode and I fear they will be forced to upgrade to IE7 within the next month.
Any suggestions you may have are most welcome. Thanks again for your quick response.
Jim -
Internet Explorer cannot download over HTTPS if Pragma: no-cache is set
APEX Ver. - 3.2
DB Ver. - 11.1.0.7
Problem : The apex application generates an XML file and saves it to a table. Users navigate to a report where they have a DOWNLOAD link to download the file. Over HTTPS, when the download link is clicked Internet Explorer (IE7) generates an Error Message saying Internet Explorer cannot download apex_util.get_blob from ...
The same functionality works in Firefox and Chrome.
A blog post on MSDN (http://blogs.msdn.com/b/ieinternals/archive/2009/10/03/internet-explorer-cannot-download-over-https-when-no-cache.aspx) describes this problem and one of the reasons contributing to this problem is a pragma declaration of no-cache , is there a way to remove the pragma declaration in the request header?
Thanks,
Ramesh
Edited by: Ramesh on Dec 10, 2010 11:27 AM
Edited by: Ramesh on Dec 10, 2010 11:28 AM
Edited by: Ramesh on Dec 10, 2010 11:29 AMDear Markus
Could you please tell me indetail...
Im able to download if im in internal network, bz it is directly pinging from server in IE 6.0 and 7.0. Problem is only with External facing, that too with IE 6.0, 7.0. In firefox im able to downlad the file even using reverse proxy , and internal network.
What i guess is problem within reverse proxy setup & configurations or IE broweser.?
Please suggest
Thanks
PRadeep -
Internet Explorer Security Support on Windows 7 & WIndows 2008 Std Server
I have an app page (tomcat https) that i was able to open from a windows 7 professional remotely but could not open from a windows 2008 std server. Is there a security settings I need to disable from windows 2008 std server? The firewall is disabled.
Both Win 7 & 2008 is on the same network.
Thanks in advance.
DTHi,
I need the error information from the Internet Explorer, if the error code is 404 that should be the webpage is not correctly developed, error code 500 means the tomcat server is not available, you should check the tomcat server, or another situation is
the port number is in use by another application, normally the default port number is 8080, you can try another port number in the comcat configuration file to see the result.
Regards
Wade Liu
TechNet Community Support -
Internet Explorer Security Settings for Previewing in Developer
Hello Marc,
I just 2 weeks new to UPK. I just switched over to a new laptop and now when I try to preview UPK in try it mode (local install), I receive an error message that says PREVIEW CANNOT OPEN "preview requires intranet settings to be enabled. These settings are located on the security tab in the Internet Settings of Internet Explorer." I current use IE 7.0. Can you advise which settings need to be changed?Hello,
For See It! and Try It! mode preview you will need to do the following:
Tools > Internet Options > Security (tab) > Local Intranet (icon) > Sites. Check all of the boxes. “Automatically detect intranet network” must be unchecked for the other buttons to be available. Once you check everything, you can re-check “Automatically detect intranet network”.
For Do It! mode preview you will need to do the following:
Tools > Internet Options > Security (tab) > Local Intranet (icon) > Custom level... Scroll down until you see the option for "Allow script-initiated windows without size or position constraints" (a little more than halfway down) and set this option to Enable.
This should allow you to properly preview these modes in the UPK Developer.
Best regards,
Marc -
Do I need Internet Explorer security updates if I use Firefox?
Hello!
I cannot find an answer to this question through a Google search so I'm asking it here please. I'm using Windows 7 and see lots of regular updates for Internet Explorer being installed. But I never use Internet Explorer, I only use Firefox. So I wanted to know, will I be putting my Firefox security at risk by not installing Internet Explorer updates released through Windows Upate? Does a flaw in one browser affect another?
Thank you!
Alice.Thank you for your quick reply jscher2000. Your advice makes sense, I'll keep updates for Internet Explorer going. It was just something I was curious about. For example, if someone used both Firefox and Chrome, would a flaw in one affect another? And whilst Googling earlier for an answer for my question before posting (didn't want to waste anyone's time with a repetitive question), I noticed some people have completely uninstalled Internet Explorer, so presumably they won't even be offered any IE updates.
Thanks again!
Alice. -
Internet Explorer Security Setting unable to set it to low
Hi All,
I have Window Server 2008 R2 Operating System, which is in workgroup, there is no Group Policy configured, I have also put off IE Enhance Security Configuration.
Still i am unable to make Security Level for Internet zone to low. It is terminal Server and for testing purpose, sometime User need to make it low. Please let me know how can we do the same.
Thanks & Regards,
Param
www.paramgupta.blogspot.comHi,
Any update?
Have you tried to reboot the server to check the result? Please post back if issue persists.
Regards
Yolanda Zhu
TechNet Community Support -
Internet explore security zone
Hey guys, I recently started working on Sharepoint 2013, developing som webparts, but I've seem to hit a wall and I simply can't figure out what the problem is, so I hope you guys can :)
What I want to do is I want to be able to see which sercurity zone my intranet is on the users browser(only on IE, no other browser support is needed for this), however, whenever I try to deploy it, it keeps returning "Default" instead of one of
the other zones which I have added my intranet to.
basically what I do is this ;
if (SPContext.Current.Site.Zone == SPUrlZone.Extranet)
Zone = "Extranet";
else if (SPContext.Current.Site.Zone == SPUrlZone.Intranet)
Zone = "Intranet";
else if (SPContext.Current.Site.Zone == SPUrlZone.Default)
Zone = "Default";
I do have a few more else statements in between but I take it you get the idea :)
so does anyone know why I the Current.Site.Zone doesn't register the correct
thing ?
Edited:
I've also tried
SPWebApplication app = SPContext.Current.Site.WebApplication;
SPAlternateUrl u = app.AlternateUrls[Request.URL];
SPUrlZone zone = u.UrlZone;
and this didn't work eitherHi,
According to your post, my understanding is that you want to see which sercurity zone your intranet is on the users browser.
To know the zone of a request we can use the SPContext.Current.Site.Zone class. This returns an enum of SPUrlZone which represents wether its a Default zone, Intranet Zone, Internet Zone, Custom Zone or Extranet Zone. You can refer to:
Get current zone in SharePoint 2010
I recommend you to create a Console Application to check whether you can get the site zone.
You can use the code as below.
using Microsoft.SharePoint;
using Microsoft.SharePoint.Administration;
namespace GetCurrentZone
class Program
static void Main(string[] args)
using (SPSite site = new SPSite("http://www.contoso.com"))
using (SPWeb web = site.OpenWeb())
string Zone = string.Empty;
if (site.Zone == SPUrlZone.Extranet)
Zone = "Extranet";
else if (site.Zone == SPUrlZone.Internet)
Zone = "Internet";
else if (site.Zone == SPUrlZone.Intranet)
Zone = "Intranet";
else if (site.Zone == SPUrlZone.Custom)
Zone = "Custom";
else if (site.Zone == SPUrlZone.Default)
Zone = "Default";
Console.WriteLine(Zone);
Console.ReadKey();
If it works, the issue is caused by the code you used.
You need to debug the code to find where the error it is.
Or you can create a new project to check whether it works.
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Internet Explorer Security Settings
Hello,
We are using IE security related Group policies in our environment. We have a site where users are unable to download html pages from all of the websites. We have already tried adding these websites to the Trusted zones. However, the issue still persists.
Users get an error bar on the top of IE page. The error states "An add-on for this website failed to run. Check the security settings in Internet Options for potential conflicts". We have a different OU where this GPO is not applied and we do not
face this issue there.
Can anyone suggest what specific setting do i need to look for in gpresult from working and non-working computer. Please find the error screenshot attached.
Regards,
Farid AnsariHi,
My guess would be you need to update your Adobe and shockwave flash...
on a workstation go
Start>Control Panel>Flash 32, click the links to check for updates.
or from IE
Tools>Manage Addons>Show All Addons... located it in the list to see its version... you should have both 32bit and 64 bit versions installed.
If possible please provide the address of any website you are having problems with your questions. That way we can visit the site and see what plugins the site requires to work as designed.
Regards.
Rob^_^ -
IE security warning- asks to install Adobe Flash Player
We encountered this problem when running SWF created with Flash CS6 on IE8. It will show a blank page with a smaller icon at the top left corner first. Then, a dialog box "Internet Explorer - Security Warning" shows up, Do you want to install this software? Name: Adobe Flash Player. with options "Install" and "Don't Install" click don't install will display the SWF right after. Install does not do much as it prompts the same message when you come back again.
The file works fine if running from Chrome. I didn't see this message using CS6 when I published the file last time (~ 3 months ago).I tried a different way and it prompts: This content requires Flash player 11.7. We have no control over our users' player version and our users can't upgrade player on their own. What are the features in Flash CS6 requires 11.7 so that I can remove it?
Thanks, -
Internet Explorer 11 - Security
In Internet Explorer 11 under the tools, security tab, I selected restricted sites and added "http://www.match.com, *match.com under websites but i.e. will still continue to display match.com in the browser. So I added other sites and they too
are not blocked from i.e.. It appears that anything that is added on the restricted sites is not being blocked.from:
http://windows.microsoft.com/en-au/windows/change-internet-explorer-security-settings#1TC=windows-7
The level of security set for Restricted sites is applied to sites that might potentially damage your computer or your information.
Adding sites to the Restricted zone does not block them, but it prevents them from using scripting or any active content. The security level for Restricted sites is set to High and can't be changed.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
Maybe you are looking for
-
Performance tuning of BPEL processes in SOA Suite 11g
Hi, We are working with a customer for performance tuning of SOA Suite 11g, one of the areas is to tune the BPEL processes. I am new to this and started out with stress testing Hello World process using SOAPUI tool. I would like help with the below
-
UFL in C# not shown in Crystal.
<span>hi ,<br />i had created the one UFL (User Function Library for Crystal Report ) as dipicted (step wise )in MSDN using VS2005 web site project. with c#. <br /><a href="/" target="_blank" title="http://">http://msdn2.microsoft.com/en-us/library/m
-
I wrote an applet who connects to a database on a network where WebServer and Oracle Server were in the same host. Now I have to migrate the applet to a network where the Webserver and the database server are in diferent hosts. Because of security is
-
Removing the preview pane in iCloud
I didn't know where to send the suggestion for this or if I'm just not looking in the right place for it. I would like to be able to remove the preview pane in my iCloud mail. It's really the biggest thing keeping me from using iCloud for email; I do
-
Out of memory error while starting NWDS
Hi. I have NWDS 7.0.08 installed. I'm developing DC's assigned to a DTR. While working, I had about 10 projects open in the workspace and when I tried opening another one, NWDS crashed giving an "out of memory" error. And when I try to reopen NWDS, I