Internet is not connecting in my ipad.

I am usine BSNL 3G card in my iPad. It was working properly. But now since few hours ago, I am facing proble to connect internet. When I want to open Safari it is showing " Safari Can'nt open the page beacuse it is not Connected to the internet." plz. suggest what procedure to follow to run/open internet.

Reset and try again. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.

Similar Messages

  • I get wireless connection but my internet does not work on my ipad 2

    I get wireless connection but my internet does not work on my ipad 2

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • When trying to sync my iPad I am getting a message stating " iTunes could not connect to the iPad "iPad" because an error occurred while reading the device

    When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device

    Hi Centreless,
    If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How can I change the apple ID on my iPhone so it is not connected to my iPad?

    How can I change the apple ID on my iPhone so it is not connected to my iPad anymore? My ex has my iPad and he is still getting my imessages even after I have deleted my iCloud account and taken my apple ID off of my messages on the iPhone? Someone please help!

    I have changed my password too!

  • ITunes could not connect to this ipad.  Could not allocate a resource

    I updated my itunes to work with the new IOS7 and all of sudden, ever i device I own will no longer work with itunes. 
    Every device, my ipad, my iphone, my wifes iPhone, my kids iPads, all say "iTunes could not connect to this iPad (or iPhone if it's a phone, etc).  Could not allocate a resource. 
    I'm not sure what's causing it and I'm not finding any posting while searching google, etc, for info about this.  Most of the postings are back from 2012 with nothing new.  I tried the 2012 suggestions and that did not fix anything.  At this moment, I have a ton of i devices that can't add music or anything to them as they are not seen by iTunes either directly connected to the computer or when on the same wireless network and connected to 110v power.
    I do see some other posts on the apple support pages but the only solution seems to be deleting the files in the lockdown folder and that does not resolve the issue for me.
    If anyone has any suggestions, I'd appreciate it.

    ok, this worked for me:
    1. Remove "iTunes" from your dock
    2. Empty The trash bin
    3. Go to http://www.apple.com/ca/itunes/download/
    4. Install (reinstall effectively)
    5. Connect your device.
    I also turned off all devices (Airplane mode is fine) before starting any of this - not sure it helped, but it didnt hurt.
    Hope that that works!

  • HT2292 When I try to connect my iPad, I get this message: iTunes could not connect to this iPad. An unknown error occurred (0xE800000A)

    When I try to connect my iPad, I get this message: iTunes could not connect to this iPad. An unknown error occurred (0xE800000A)

    Let's try the following document with that one:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

  • I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?

    I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?

    Quit iTunes, restart your computer, reset the iPad and try again.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT1212 My ipad displays the message ipad is disabled- connect to itunes. When i connect to itunes, it says in itunes- Itunes could not connect to the ipad "Name" because the ipad is locked with a passcode, but ovbiously i cant unlock my ipad. HELP!!!

    When i connect to itunes, it says in itunes- Itunes could not connect to the ipad "Name" because the ipad is locked with a passcode, but ovbiously i cant unlock my ipad. HELP!!!

    Hi mChelle,
    Follow the instructions that best apply to your situation in the link below:
    http://support.apple.com/kb/HT1212
    Cheers,
    GB
    Oh - I see that you have that article linked to your post above. Read the entire paragraph in item #1. It tells you what to do if it is asking for a passcode.

  • Itunes could not connect to the ipad because an invalid response was received from the device

    Hello
    I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
    However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
    "Itunes could not connect to the ipad because an invalid response was received from the device"
    I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
    I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
    I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
    It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
    Thank you for your help!
    System specs:
    asus rampage v extreme motherboard
    OCZ vertex 4 SSD
    8 Gb DDR3 RAM (1600 mHz)
    windows7 x64
    Intel i7 3.5Ghz 1155
    nvidia GTX295  (x2 running in Sli)

    I fixed this problem.  Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
    My iPad 2 would no longer sync with my old  PowerPC Mac mini running MacOS. My iPhone 3GS synced fine.  IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes.  I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
    iPad 2 used to sync prior to iOS 7 installation. 
    Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
    Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could.  )
    all good now.

  • ITunes could not connect to the iPad "Micah's iPad Air" because the device timed out.

    After using my ipad air for the last week, I plugged it in for the first time to back up some videos. I get this message: iTunes could not connect to the iPad “Micah's iPad Air” because the device timed out. Any ideas?

    Eject your iPad if you haven't already done so. Quit iTunes and restart your computer. Reboot your iPad and then try again, use another USB port on your computer, of you have another free port available,
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have installed photoshop elements 12. when I try use the editing features it said that i must login to Adobe to register the product. but each time i try to it said there is a problem. help the problem stated that the internet is not connected, but that

    i have installed photoshop elements 12.
    when I try use the editing features it said that i must login to Adobe to register the product.
    but each time i try to it said there is a problem.
    help
    the problem stated that the internet is not connected, but that is not the case.

    I had the same issue and I'm running Windows 7.  Tried working with technical support for several hours but they were no help.  They just had me doing the same things over and over, offering no real answers.  I finally got fed up and have decided to return my product for a full refund.

  • HT201263 itunes could not connect to the iPad because it is locked with a passcode. I don't have the computer where I last sync

    itunes could not connect to the iPad because it is locked with a passcode. I don't have the computer where I last sync

    Actually I'm the nanny of a 6 year old girl. And is her iPad, my boss needs that this iPad work again because the little girl is making everybody crazy. Please helpppppppp

  • I bought my ipad from ksa and am from egypt .. my ipad connected to the itunes in ksa but from someone else laptop and i came here to egypt and it says itunes could not connect to this ipad becuz an unknown error :S what should i do please someone tell me

    i bought my ipad from ksa and am from egypt .. my ipad connected to the itunes in ksa but from someone else laptop and i came here to egypt and it says itunes could not connect to this ipad becuz an unknown error :S what should i do please someone tell me !!?

    Your iPad is syncd with iTunes on your computer and your iTunes account controls what's in your iPad.   Previously it must have been sync'd with another person's iTunes account in which case you need to completely clear it out to make it your own.
    Go to Settings > General > Reset (at bottom) > Erase All Content and Settings
    Then plug it into your computer and restore it with YOUR iTunes account.
    Or if your have an iTunes account already setup under your name with your own apps and media -
    Plug it into your computer, open iTunes if it doesn't open automatically and on your iPad page, click Restore
    Let it proceed.  Then the iPad will no longer be looking for someone else's account.

  • HT1695 my internet is not connecting in my "iphone 4s" what is the solution please help

    my internet is not connecting in my "iphone 4s" what is the solution please help

    Contact the carrier.

  • I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

    I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

Maybe you are looking for

  • Multiple Sessions in CMC for the same user

    Hello, Version:  BOE XI R2 SP3 A user opens an Xcelsius Dashboard.  As they are using the dashboard, multiple calls are being made through QaaWS to the database.  In CMC, we can see multiple sessions created for that user.  However, this is not 100%

  • BSOD controlling Nanotec servo (Labview+visa+Daqmx)

    I'm using a set-up where I control a servo with Labview. I run the VI, set some speeds to the servo, and within minutes, Windows gets a BSOD. I would like to know the cause of the problem and a fix please. What am I using? - Windows 8.1 (and windows

  • Ios7, Numbers problem on data input

    On both iPhone and iPad2, in Numbers, when I input data using the 'tab' screen,( sorry, not sure of what you call it), and use down arrow to go to next cell, the cursor disappears and will only come back if I come out of that screen using the left or

  • EPG - Can't get EPG to add a scheduled recording...

    The TVTV EPG (UK) doesn't add a scheduled recording when selected, I've followed the instructions on the TVTV site, but nothing appears to happen... The website indicates that there should be an activation code to add, where would I find this on my d

  • Playing Music

    I am having problems when I select a track to play from my I Tunes library. The track appears in the bar at the top and I can move the icon along, but it will not play on its own. I have just upgraded to 7.01 as i thought the problem might have been