Internet is not starting in my palm treo 680(cingular) mobile phone.

i have purchased new palmtreo680(cingular) before 1 year and right now using samew instrument in INDIA with AIRTEL mobile connection. Now i unable to start internet connection in this my device so plz give positive suppoert & complete guidelines regarding my this problem ...that how can i start my interner connection in my same device?
just mail me answer on this my email id : [email protected] if possible...
Thanks & Regards
Niraj Shah
Post relates to: Treo 680 (Cingular)
Niraj Shah
Post relates to: Treo 680 (Cingular)
Post relates to: Treo 680 (Cingular)

DId you get a solution. As I have a Palm Treo 750, It has cingular on top of it. It is suppose to be unlocked but Airtel GPRS is not working on it.
Please help if there is a solution to it

Similar Messages

Internet is not starting in my palm treo 680(cingular) mobile phone.

Moved to correct Board

DId you get a solution. As I have a Palm Treo 750, It has cingular on top of it. It is suppose to be unlocked but Airtel GPRS is not working on it.
Please help if there is a solution to it

Palm Treo 750; Cingular mobile transferring to Airtel (India)

I have a Palm Treo 750, which is supposedly unlocked and I was using it in US with Cingular now Back in India when I try to configure with Airtel. Internet is NOT working
Can someone please help me on this
Post relates to: Treo 750 (Cingular)

I am not familiar with your provider, but it's possible that the "modem" settings need to be changed. If you go to Start > Settings > Connections tab > Connections, and click Manage Existing Connections, can you match the device settings with the settings from your provider? (Note: that is based on WinMo 6.1, so your menus may vary.)

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Synchronizing Palm Treo 680 Unlocked with Outlook 2003 on Windows 7

After 2 full install and reinstall of Palm 6.2 I cannot synch my Outlook 2003 and Palm Treo 680
Hotsynch Journal says everything has synchronized correctly but new meetings and task changes in one platform do not appear on other platform.
There is an error mentioned for file PmTrcae Database (Protocol error 4004)
I must mention that Installation process seems to drop after announcing that first hotsynch will be performed, it never does, I had to start it manually from the Treo.
Will there be a proper Windows 7 version published?
Post relates to: Treo 680 (Unlocked GSM)
This question was solved.
View Solution.

gallinago wrote:
I downloaded v.6 onto my new Windows 7 computer. When I try to hot sync, I get a window stating that the driver is missing and I cannot find a driver on your site or on windows to download. I don't think Outlook is involved here; I don't use it.
Are you running a 64bit version of Win7?
As reported many, many times in this forum, there are no USB drivers for this version.
Please read the Sticky post at the top of this section for guidance:
http://forums.palm.com/t5/Windows-HotSync/Windows-7-and-Vista-hotsync-instructions-here/td-p/251755/...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Can i really update my unlocked palm treo 680?

According to the link below, that's the software update for palm treo 680 unlocked, but the instruccion says that if i go to Phone-Menu-Options-Phone-Info-Software, and it says Treo680-1.03-CNG or Treo680-1.03-ATT, the software is not compatible with my device. The thing is that the software says Treo680-1.03-CNG, but it's unlocked. So, is the software update compatible with my treo or not?
http://kb.palm.com/wps/portal/kb/na/treo/680/unlocked/solutions/article/10807_en.html
Post relates to: Treo 680 (Unlocked GSM)

If you have the Treo680-1.03-CNG rom in your Treo, it is an AT&T branded Treo that was unlocked. It is not a true unlocked Treo. For an unlocked Treo that is unlocked from the factory, it will have a software version of XXX-ROW. ROW means Rest Of World.
For your Treo, you need the AT&T update. You can find it here;
http://kb.palm.com/wps/portal/kb/common/article/10580_en.html
The only caveat here is that once you upgrade the software, you will need to have the Treo unlocked again. There are sites on the internet that offer this service or if you had the Treo unlocked before, contact the company that unlocked the Treo for you.

Sd card & the palm treo 680

i have the palm treo 680. when i put an sd card into it to listen to music, it reads the card but does not play the music ????(??%$?$#$!. what am i not doing?
Post relates to: Treo 680 (Rogers)

If the file is in .WMA then did you get it off your harddrive or directly from a CD. Basically my question is how did you obtain the music that you have now on your Palm?
Also what player or what version of the player do you have on your 680?
Pocket Tunes Basic $19.95
Pocket Tunes Basic provides playback of MP3, WAV, and Ogg Vorbis files, including background playback so you can play music while you use other applications, customizable skins, full playlist capabilities, album art, a graphic equalizer, and much more! Pocket Tunes Basic includes free updates to all future 4.X versions of Pocket Tunes Basic, when available.
Pocket Tunes Deluxe $37.95
Pocket Tunes Deluxe includes all the features of Pocket Tunes Basic and adds WMA and AAC/aacPlus playback, online music store support, crossfading, gapless playback, bookmarks, and Internet audio. Pocket Tunes Deluxe includes free updates to all future 4.X versions of Pocket Tunes Deluxe, when available.
Post relates to: Centro (Sprint)

After Hotsynching a Palm Treo 680, its Hotsynch stuck in loop, lock ups, etc.

Hello,
My father is having problem with his Palm Treo 680 (unlocked). Before the incident, he Hotsynched between his Treo and his Dell Optiplex machine (Windows 2000 SP4 with all updates; USB connection).
The PDA went stuck in a Hotsynch screen on the PDA even if it is disconnected and hard resetted (battery removal since there is no hole). Eventually, the issue stopped (don't know what he did). However, there are still random lock ups and the looping Hotsynch again (no specific times and patterns). Also removing the extra memory cards didn't help either. Also, he reported that his phone didsn't ring either from incoming calls.
Does anyone know what's going on? Is the PDA dying since he uses it daily all almost all day when he is awake? His warranty expired already, he said. It seems like a lot of people had problems from my Google searches.
FYI if it helps, the Hotsynch logs BEFORE the problems (he didn't install anything new -- only data changes and updates): http://pastebin.ca/678475
Thank you in advance.
Post relates to: Treo 680 (Unlocked GSM)
Post relates to: Treo 680 (Unlocked GSM)

This behavior has been reported by users whose phones got wet in the connector area.
Was this the case in yours?
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Ical, Missing Sync and Palm Treo 680

Most of 2007 was spent trying to get my Palm Lifedrive to Sync with iCal using Missing Sync version 5 thru 6. One day it was fine six days it was not. Nothing I have found to be more infuriating and frustrating as trying to sync my Palm with my Computer.
So, with the arrival of Leopard and the much promised improvements to Sync Services I decided to perform a Clean Install of Leopard on my Powerbook, and run just a few apps on my Powerbook leaving the rest on my new Mini Mac. At the same time I decided to upgrade my Palm Lifedrive to a Palm Treo 680. So, New OS, New Palm, Leopard ready Missing Sync.
1st Sync was spot on. All my data downloaded from .Mac for iCal and AB, sync'ed wonderfully with my Palm Treo. That was on January 7th. Since then iCal absolutely refuses to refresh. And already I am beginning to feel that 2008 and Syncing will be as frustrating as 2007.
Why cannot MarkSpace sit down with Apple and iron out all the crap. For the last couple of days I though I would see if iCal was not communicating with SyncServices by using Entourage. But this only synced with AB and did not touch iCal. To do this I had to use iSync and during the first sync only 144 of 1456 addresses were left on my Palm! iCal - no change!!
So I dumped iSync/Entourage and went back to Missing Sync own Conduits. I got my AB entries back but absolutely nothing from iCal
When I wiped my Powerbook, I cloned the hardrive. Whilst routing around, I found a folder called FileServices in ~libray. This folder was over 12gig in size. What is this folder for and why was it so big? This could explain why my Backup Sets were getting increasing larger than my actual Hardrive even though I was peforming just a daily incremental backup!
Back to iCal. Is there any reason why iCal will not refresh after a so called successful sync with my Treo 680 via Missing Sync v6.0.2?

You might have better luck getting support at Mark/Space the makers of the program. http://support.markspace.com
I did briefly look around there and found this article, not sure if its related to your issue or not.
https://support.markspace.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=395&nav=0,113

Palm Treo 680's Chinese and English datas + HotSync + Mac OS X?

Hello!
I am wondering if it is safe to get an Apple MacBook Pro for a client
who uses a Palm Treo 680 with English and Chinese datas (with CJKOS --
http://www.dyts.com/en/cjkos.html ). Currently, he uses his Windows
2000 SP4 on his old Dell Optiplex PC and Hotsync (via USB) his datas.
It has MS IME and TwinBridge to read and write Chinese characters.
Is he going to have any problems if he were to buy a new MacBook Pro
with the latest Mac OS X? I read that he will need a third party
softwares (Missing Sync for Palm v6.0 --
http://www.markspace.com/missingsync_palmos.php [not free] and Palm
Encoding Setup -- http://lokiware.info/Palm-Encoding-Setup ). I was
told that using Palm Desktop is messy and complex. Also, is it safe to
mix both PC and Mac to share Palm datas? All these third parties and
fancy setups seems complex for a guy who doesn't know computers well.
Thank you in advance.
Post relates to: Treo 680 (Unlocked GSM)
Post relates to: Treo 680 (Unlocked GSM)

I have no experience with using a handheld with chinese character sets, but mac osx will natively support a range of chinese and japanese character sets. The best place to go is contact apple and check the correct sets are supported.
As for how messy etc palm desktop is, some people love it and others can't stand it. Personally I don't mind it but for people who have the same set of contacts they sync with isync and palm desktop I can see it getting very annoying even with missing sync (which I don't have). I'd recommend you find someone with a mac and actually have a go with it before you make any definite decisions you could regret.
Post relates to: Palm V

Separate Palm desktop installs for Palm M505 and its apps and Palm Treo 680 and its apps on same Windows XP computer?

Hello:
I'm trying to do a workaround. I've got a Palm M505 that has a terrific keyboard that hooks up to it. This lets me write documents in a very portable way. The Treo 680 never had the equivalent, really full-sized external keyboard made compatible with it. So, I want to create documents on the M505 but otherwise mostly use the Treo 680.
Here's the rub. When I tried to sync both devices to my Palm Desktop version 4.1.2 for Windows XP, it didn't work. Hotsync tries to synchronize apps that won't work on the M505. Also, the versions of Documents to Go are very different (5.x versus 8.x).
I would love to have a separate Palm Desktop installation for each device, so I can have a nice desktop environment for each by launching them separately. But, the Palm Desktop installation "wizard" shuts down and won't give me the opportunity to do a separate Desktop install.
Any ideas other than buying an ultra-small laptop and dropping this kludgy scheme? For instance, if I were to copy the installed files from one directory to another, would this work, or would it not be set up in the Registry?
Thanks!
Post relates to: Treo 680 (Cingular)
This question was solved.
View Solution.

Okay. Stubbornness pays off! I was able to beam documents between my Palm M505 and Treo 680, avoiding the need for complicated syncing of both Palms to my laptop machine. I was also able to beam documents from both Palms to my Dell Inspiron M300 laptop, running Windows XP Pro.
When beaming between Palm devices, the results were better. In the M505, Documents to Go version 5.004 doesn't translate documents into Microsoft Word format but into something it calls Word to Go. The Treo has DTG version 8.003, which is able to read files in Word to Go format and save in native Microsoft Word for Windows format.
However, even when beaming a Word to Go (old format) document directly onto the Desktop of my Windows XP machine, it gave me a document I could open, with the text I'd input following a bunch of characters Word obviously didn't understand. If I add the file from my desktop to the newer Documents to Go version on my laptop, I expect it will translate it into a Word file when it syncs to the Treo but haven't tested that. In either case, beaming between Palm devices is the easiest solution and completely solves the problem.
For any readers who are interested, the reason I've so stubbornly tried to solve this problem is that I'm a fast touch typist. My old Palm M505 plugs directly into a wonderful, old Palm Portable Keyboard that is full-sized. Because it's a hard-wired connection, I can type fast. That old keyboard compresses into the same folded footprint as some new foldover external keyboards. It does this even though much bigger by folding in an accordian-like fashion, with four flat surfaces folder together. That keyboard design now exists in some of the keyboards sold by IGo corporation (their old name for it was Sierra Stowaway Bluetooth Keyboard). But, they were unable to figure out how to handshake their Bluetooth with the odd Bluetooth configuation in the Treo 680. Why Palm made the Bluetooth library different in the Treo 680 from other Treos is a mystery to me, but enough of this tangent. Some interested in this workaround may be curious for similar reasons.
Post relates to: Treo 680 (Cingular)

Palm treo 680 Problems with hotmail account

I have a palm treo 680, have Problems with hotmail account, dont have configuration in versamail and when enter with the browser dont open documents, photos or videos. Thanks
Post relates to: Treo 680 (Unlocked GSM)

IIRC, Hotmail is like Yahoo's free email - you have to pay for POP access.
If you aren't paying for a premium version of HotMail, it won't work correctly with VersaMail.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Newly unlocked Palm Treo 680 (AT&T) can't update to 1.12???

I just successfully unlocked my literraly new never been used Palm Treo 680 for AT&T with software still TREO680-1.03-ATT, firmware R01.31. I'm trying to run this "Treo680_1_12_ROW_desktopupdater.exe" but consistently getting this screen, "Unsupported Device: Important...This updater only works with Palm Treo smart phone with $Carrier$ service."
Post relates to: Centro (Verizon)

Hello!
Cause the phone has been unlocked does not mean that u use the updater for the unbranded devices. The updaters is not based on the subsidation status but the build of the phone. Since you're using a ATT Treo 680, the appropriate/only update avail for your phone is the 2.11 updater found here:
http://kb.palm.com/wps/portal/kb/na/treo/680/att/solutions/article/10580_en.html
As long as the phone was unlocked through official methods, then their is no worries for the phone to be locked again since that is pernament.
Message Edited by thetreoguy on 05-12-2009 04:19 PM

Where is the underscore _ key on the palm treo 680

where is the underscore _ key on the palm treo 680
Post relates to: Treo 680 (AT&T)

If you hit the BLACK button between the letters A, S and Z and then hit the letter S you will get a dash sign, then all you have to do is hit the ALT next to the letters N, M and drop down menu button. From there you can select all the character that you want including the underscore sign.
Message Edited by IrreducibleM31 on 11-06-2008 01:50 PM

Will firefox mobile ever be available for my Palm Pixie (1st generation) mobile phone?

Will firefox mobile ever be available for my Palm Pixie (1st generation) mobile phone?

Thanks dude. I wasn't terribly hopeful anyway. Looks like this never got off the ground and I doubt ever will. Palm is waaaay behind really, but the service plan I got with the phone was worth it. Peace, G

Internet is not starting in my palm treo 680(cingular) mobile phone.

Similar Messages

Maybe you are looking for